- 24 Sep, 2020 32 commits
-
-
Felix Fietkau authored
Indicate the filled parameter to the firmware Signed-off-by:Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Use the txwi data as primary source information to avoid touching skb data Use bitfield instead of state variable + spinlock Signed-off-by: -
Felix Fietkau authored
It is not used anywhere for this driver Signed-off-by: -
Felix Fietkau authored
mt7615 and newer drivers do not need this, since they use sequence number offload Moving this code also reduces the number of callsites to make it easier to review Signed-off-by: -
Felix Fietkau authored
Preparation for supporting more offload features Signed-off-by: -
Felix Fietkau authored
Set it to 15 to match reference driver Signed-off-by: -
Felix Fietkau authored
Queueing a per-sta work item from the tx free path can become very expensive under load. This work is only supposed to pull rate control stats every second and deal with rate control changes. Additionally, the rate control update code was wrong, because it was confusing bit masks and bit numbers in test_bit. Fix this by introducing a dedicated device work item for rate control updates, and by polling station stats from the phy mac work. Stations requiring polling or rate control updates are added to lists protected by dev->sta_poll_lock. Signed-off-by: -
Felix Fietkau authored
Fixes a race condition where multiple tx cleanup or sta poll tasks could run in parallel. Signed-off-by: -
Felix Fietkau authored
Fixes a race condition where multiple tx cleanup tasks could run in parallel Signed-off-by: -
Felix Fietkau authored
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Disable interrupts in one call before scheduling Signed-off-by: -
Felix Fietkau authored
If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: -
Felix Fietkau authored
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: -
Felix Fietkau authored
Avoids spurious interrupts in case the hardware was running already Signed-off-by: -
Felix Fietkau authored
A small part of the first skb buffer is passed to the firmware for parsing via DMA, while the full buffer is passed as part of the TXP. Avoid calling DMA unmap on the first part (with a different length than map) Signed-off-by: -
Felix Fietkau authored
Check wcid RCU pointer before using it Signed-off-by: -
Ryder Lee authored
Enable U-APSD support for AP interface. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Remove unused state variable in mt76_sdio structure Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
In order to maximize parallelism, split status work in tx status work and rx net work Signed-off-by:
-
Lorenzo Bianconi authored
As it has been done for tx and rx processing, move tx/rx status processing into mt76s_txrx_wq workqueue Signed-off-by:
-
Lorenzo Bianconi authored
Move rx processing to mt76s_txrx_wq in order to minimize the interval when the sdio bus is locked during rx Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to a dedicated work. This is preliminary patch to improve mt7663s throughput Signed-off-by:
-
Lorenzo Bianconi authored
Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine Signed-off-by:
-
Lorenzo Bianconi authored
Reschedule runtime-pm after receiving a tx interrupt. Update runtime-pm last activity before injecting packets Signed-off-by:
-
Lorenzo Bianconi authored
Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list() if the device is in runtime-pm Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Lorenzo Bianconi authored
wq queue is always updated holding mt76 spinlock. Grab mt76 lock in mt7615_queue_key_update() before putting a new element at the end of the queue. Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support") Signed-off-by:
-
Lorenzo Bianconi authored
Initialize set_drv_ctrl and set_fw_ctrl function pointers in mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for mt7663s chipset. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce set_drv_ctrl and set_fw_ctrl function pointers in mt7615_mcu_ops data structure. This is a preliminary patch to enable runtime-pm for non-pci chipsets Signed-off-by:
-
Shayne Chen authored
MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D. Thus, add support to automatically register ext_phy if DBDC is detected. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com
-
Andreas Färber authored
If rtw_core_init() fails to load the wow firmware, rtw_core_deinit() will not get called to clean up the regular firmware. Ensure that an error loading the wow firmware does not produce an oops for the regular firmware by waiting on its completion to be signalled before returning. Also release the loaded firmware. Fixes: c8e5695e ("rtw88: load wowlan firmware if wowlan is supported") Cc: Chin-Yen Lee <timlee@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
Andreas Färber <afaerber@suse.de> Signed-off-by:
-
Andreas Färber authored
In case of rtw8822be, a probe failure after successful rtw_core_init() has been observed to occasionally lead to an oops from rtw_load_firmware_cb(): [ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]--- To avoid this, wait on the completion callbacks in rtw_core_deinit() before releasing firmware and continuing teardown. Note that rtw_wait_firmware_completion() was introduced with c8e5695e ("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inline wait_for_completion(&rtwdev->fw.completion) instead. Fixes: e3037485 ("rtw88: new Realtek 802.11ac driver") Fixes: c8e5695e ("rtw88: load wowlan firmware if wowlan is supported") Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
-
Zhang Changzhong authored
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 1576 | int ret; | ^~~ driver_for_each_device() has been declared with __must_check, so the return value should be checked. Signed-off-by:Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by:
-
- 22 Sep, 2020 6 commits
-
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1155:27-47: WARNING: Comparison of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1156:3-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723be/dm.c:1159:3-23: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2680:27-47: WARNING: Comparison of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2683:3-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2686:3-23: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:721:27-47: WARNING: Comparison of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:722:3-23: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:725:2-22: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Joe Perches authored
Remove the loop and use the generic ffs instead. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Qinglang Miao authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
YueHaibing authored
There is no caller in tree, so can remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 21 Sep, 2020 2 commits
-
-
Zheng Bin authored
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c:861:6-35: WARNING: Comparison to bool Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:566:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:572:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:581:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:587:13-19: WARNING: Comparison to bool Signed-off-by:
-
