- 17 Oct, 2020 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c updates from Boris Brezillon: - Fix DAA for the pre-reserved address case - Fix an error path in the cadence driver * tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: Fix error return in cdns_i3c_master_probe() i3c: master: fix for SETDASA and DAA process i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds authored
Pull thermal updates from Daniel Lezcano: - Fix Kconfig typo "acces" -> "access" (Colin Ian King) - Use dev_error_probe() to simplify the error handling on imx and imx8 platforms (Anson Huang) - Use dedicated kobj_to_dev() instead of container_of() in the sysfs core code (Tian Tao) - Fix coding style by adding braces to a one line conditional statement on rcar (Geert Uytterhoeven) - Add DT binding documentation for the r8a774e1 platform and update the Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar) - Simplify the return expression of stm_thermal_prepare on the stm32 platform (Qinglang Miao) - Fix the unit in the function documentation for the idle injection cooling device (Zhuguang Qing) - Remove an unecessary mutex_init() in the core code (Qinglang Miao) - Add support for keep alive events in the core code and the specific int340x (Srinivas Pandruvada) - Remove unused thermal zone variable in devfreq and cpufreq cooling devices (Zhuguang Qing) - Add the A100's THS controller support (Yangtao Li) - Add power management on the omap3's bandgap sensor (Adam Ford) - Fix a missing nlmsg_free in the netlink core error path (Jing Xiangfeng) * tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp() thermal: ti-soc-thermal: Enable addition power management thermal: sun8i: Add A100's THS controller support thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: cooling: Remove unused variable *tz thermal: int340x: Add keep alive response method thermal: core: Add new event for sending keep alive notifications thermal: int340x: Provide notification for OEM variable change thermal: core: remove unnecessary mutex_init() thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config thermal: stm32: simplify the return expression of stm_thermal_prepare() dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support thermal: rcar_thermal: Add missing braces to conditional statement thermal: Use kobj_to_dev() instead of container_of() thermal: imx8mm: Use dev_err_probe() to simplify error handling thermal: imx: Use dev_err_probe() to simplify error handling drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"
-
- 16 Oct, 2020 37 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: - Improve performance for certain container setups by introducing a "volatile" mode - ioctl improvements - continue preparation for unprivileged overlay mounts * tag 'ovl-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use generic vfs_ioc_setflags_prepare() helper ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories ovl: rearrange ovl_can_list() ovl: enumerate private xattrs ovl: pass ovl_fs down to functions accessing private xattrs ovl: drop flags argument from ovl_do_setxattr() ovl: adhere to the vfs_ vs. ovl_do_ conventions for xattrs ovl: use ovl_do_getxattr() for private xattr ovl: fold ovl_getxattr() into ovl_get_redirect_xattr() ovl: clean up ovl_getxattr() in copy_up.c duplicate ovl_getxattr() ovl: provide a mount option "volatile" ovl: check for incompatible features in work dir
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull afs updates from David Howells: "A collection of fixes to fix afs_cell struct refcounting, thereby fixing a slew of related syzbot bugs: - Fix the cell tree in the netns to use an rwsem rather than RCU. There seem to be some problems deriving from the use of RCU and a seqlock to walk the rbtree, but it's not entirely clear what since there are several different failures being seen. Changing things to use an rwsem instead makes it more robust. The extra performance derived from using RCU isn't necessary in this case since the only time we're looking up a cell is during mount or when cells are being manually added. - Fix the refcounting by splitting the usage counter into a memory refcount and an active users counter. The usage counter was doing double duty, keeping track of whether a cell is still in use and keeping track of when it needs to be destroyed - but this makes the clean up tricky. Separating these out simplifies the logic. - Fix purging a cell that has an alias. A cell alias pins the cell it's an alias of, but the alias is always later in the list. Trying to purge in a single pass causes rmmod to hang in such a case. - Fix cell removal. If a cell's manager is requeued whilst it's removing itself, the manager will run again and re-remove itself, causing problems in various places. Follow Hillf Danton's suggestion to insert a more terminal state that causes the manager to do nothing post-removal. In additional to the above, two other changes: - Add a tracepoint for the cell refcount and active users count. This helped with debugging the above and may be useful again in future. - Downgrade an assertion to a print when a still-active server is seen during purging. This was happening as a consequence of incomplete cell removal before the servers were cleaned up" * tag 'afs-fixes-20201016' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Don't assert on unpurgeable server records afs: Add tracing for cell refcount and active user count afs: Fix cell removal afs: Fix cell purging with aliases afs: Fix cell refcounting by splitting the usage counter afs: Fix rapid cell addition/removal by not using RCU on cells tree -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've added new features such as zone capacity for ZNS and a new GC policy, ATGC, along with in-memory segment management. In addition, we could improve the decompression speed significantly by changing virtual mapping method. Even though we've fixed lots of small bugs in compression support, I feel that it becomes more stable so that I could give it a try in production. Enhancements: - suport zone capacity in NVMe Zoned Namespace devices - introduce in-memory current segment management - add standart casefolding support - support age threshold based garbage collection - improve decompression speed by changing virtual mapping method Bug fixes: - fix condition checks in some ioctl() such as compression, move_range, etc - fix 32/64bits support in data structures - fix memory allocation in zstd decompress - add some boundary checks to avoid kernel panic on corrupted image - fix disallowing compression for non-empty file - fix slab leakage of compressed block writes In addition, it includes code refactoring for better readability and minor bug fixes for compression and zoned device support" * tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: code cleanup by removing unnecessary check f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info f2fs: fix writecount false positive in releasing compress blocks f2fs: introduce check_swap_activate_fast() f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case f2fs: handle errors of f2fs_get_meta_page_nofail f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode f2fs: reject CASEFOLD inode flag without casefold feature f2fs: fix memory alignment to support 32bit f2fs: fix slab leak of rpages pointer f2fs: compress: fix to disallow enabling compress on non-empty file f2fs: compress: introduce cic/dic slab cache f2fs: compress: introduce page array slab cache f2fs: fix to do sanity check on segment/section count f2fs: fix to check segment boundary during SIT page readahead f2fs: fix uninit-value in f2fs_lookup f2fs: remove unneeded parameter in find_in_block() f2fs: fix wrong total_sections check and fsmeta check f2fs: remove duplicated code in sanity_check_area_boundary f2fs: remove unused check on version_bitmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull documentation updates from Mauro Carvalho Chehab: "A series of patches addressing warnings produced by make htmldocs. This includes: - kernel-doc markup fixes - ReST fixes - Updates at the build system in order to support newer versions of the docs build toolchain (Sphinx) After this series, the number of html build warnings should reduce significantly, and building with Sphinx 3.1 or later should now be supported (although it is still recommended to use Sphinx 2.4.4). As agreed with Jon, I should be sending you a late pull request by the end of the merge window addressing remaining issues with docs build, as there are a number of warning fixes that depends on pull requests that should be happening along the merge window. The end goal is to have a clean htmldocs build on Kernel 5.10. PS. It should be noticed that Sphinx 3.0 is not currently supported, as it lacks support for C domain namespaces. Such feature, needed in order to document uAPI system calls with Sphinx 3.x, was added only on Sphinx 3.1" * tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits) PM / devfreq: remove a duplicated kernel-doc markup mm/doc: fix a literal block markup workqueue: fix a kernel-doc warning docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup Input: sparse-keymap: add a description for @sw rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu nl80211: docs: add a description for s1g_cap parameter usb: docs: document altmode register/unregister functions kunit: test.h: fix a bad kernel-doc markup drivers: core: fix kernel-doc markup for dev_err_probe() docs: bio: fix a kerneldoc markup kunit: test.h: solve kernel-doc warnings block: bio: fix a warning at the kernel-doc markups docs: powerpc: syscall64-abi.rst: fix a malformed table drivers: net: hamradio: fix document location net: appletalk: Kconfig: Fix docs location dt-bindings: fix references to files converted to yaml memblock: get rid of a :c:type leftover math64.h: kernel-docs: Convert some markups into normal comments media: uAPI: buffer.rst: remove a left-over documentation ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Fix mismatch section of adding early trace events. Fixes the issue of a mismatch section that was missed due to gcc inlining the offending function, while clang did not (and reported the issue)" * tag 'trace-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove __init from __trace_early_add_new_event()
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fix from Petr Mladek: "Prevent overflow in the new lockless ringbuffer" * tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: ringbuffer: Wrong data pointer when appending small string
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linuxLinus Torvalds authored
Pull kgdb updates from Daniel Thompson: "A fairly modest set of changes for this cycle. Of particular note are an earlycon fix from Doug Anderson and my own changes to get kgdb/kdb to honour the kprobe blocklist. The later creates a safety rail that strongly encourages developers not to place breakpoints in, for example, arch specific trap handling code. Also included are a couple of small fixes and tweaks: an API update, eliminate a coverity dead code warning, improved handling of search during multi-line printk and a couple of typo corrections" * tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Fix pager search for multi-line strings kernel: debug: Centralize dbg_[de]activate_sw_breakpoints kgdb: Add NOKPROBE labels on the trap handler functions kgdb: Honour the kprobe blocklist when setting breakpoints kernel/debug: Fix spelling mistake in debug_core.c kdb: Use newer api for tasklist scanning kgdb: Make "kgdbcon" work properly with "kgdb_earlycon" kdb: remove unnecessary null check of dbg_io_ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for powerpc, as well as a related fix for sparc. - Remove support for PowerPC 601. - Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA v3.1 (Power10) watchpoint features. - A fix for kernels using 4K pages and the hash MMU on bare metal Power9 systems with > 16TB of RAM, or RAM on the 2nd node. - A basic idle driver for shallow stop states on Power10. - Tweaks to our sched domains code to better inform the scheduler about the hardware topology on Power9/10, where two SMT4 cores can be presented by firmware as an SMT8 core. - A series doing further reworks & cleanups of our EEH code. - Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to prevent root from overwriting kernel memory. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt, Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang Yingliang, zhengbin. * tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits) Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed" selftests/powerpc: Fix eeh-basic.sh exit codes cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier powerpc/time: Make get_tb() common to PPC32 and PPC64 powerpc/time: Make get_tbl() common to PPC32 and PPC64 powerpc/time: Remove get_tbu() powerpc/time: Avoid using get_tbl() and get_tbu() internally powerpc/time: Make mftb() common to PPC32 and PPC64 powerpc/time: Rename mftbl() to mftb() powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S powerpc/32s: Rename head_32.S to head_book3s_32.S powerpc/32s: Setup the early hash table at all time. powerpc/time: Remove ifdef in get_dec() and set_dec() powerpc: Remove get_tb_or_rtc() powerpc: Remove __USE_RTC() powerpc: Tidy up a bit after removal of PowerPC 601. powerpc: Remove support for PowerPC 601 powerpc: Remove PowerPC 601 powerpc: Drop SYNC_601() ISYNC_601() and SYNC() powerpc: Remove CONFIG_PPC601_SYNC_FIX ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ...
-
Albert van der Linde authored
To test fault-tolerance of user memory access functions, introduce fault injection to usercopy functions. If a failure is expected return either -EFAULT or the total amount of bytes that were not copied. Signed-off-by:
Albert van der Linde <alinde@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200831171733.955393-3-alinde@google.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Albert van der Linde authored
Patch series "add fault injection to user memory access", v3. The goal of this series is to improve testing of fault-tolerance in usages of user memory access functions, by adding support for fault injection. syzkaller/syzbot are using the existing fault injection modes and will use this particular feature also. The first patch adds failure injection capability for usercopy functions. The second changes usercopy functions to use this new failure capability (copy_from_user, ...). The third patch adds get/put/clear_user failures to x86. This patch (of 3): Add a failure injection capability to improve testing of fault-tolerance in usages of user memory access functions. Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy functions. The should_fail_usercopy function is to be called by these functions (copy_from_user, get_user, ...) in order to fail or not. Signed-off-by:
-
Libing Zhou authored
When use 'stat' tool to display file status, the 'Blocks' field always in '0', this is not good for tool 'du'(e.g.: busybox 'du'), it always output '0' size for the files under ROMFS since such tool calculates number of 512B Blocks. This patch calculates approx. number of 512B blocks based on inode size. Signed-off-by:
Libing Zhou <libing.zhou@nokia-sbell.com> Signed-off-by:
-
George Popescu authored
When the kernel is compiled with Clang, -fsanitize=bounds expands to -fsanitize=array-bounds and -fsanitize=local-bounds. Enabling -fsanitize=local-bounds with Clang has the unfortunate side-effect of inserting traps; this goes back to its original intent, which was as a hardening and not a debugging feature [1]. The same feature made its way into -fsanitize=bounds, but the traps remained. For that reason, -fsanitize=bounds was split into 'array-bounds' and 'local-bounds' [2]. Since 'local-bounds' doesn't behave like a normal sanitizer, enable it with Clang only if trapping behaviour was requested by CONFIG_UBSAN_TRAP=y. Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the 'local-bounds' option by default when UBSAN_TRAP is enabled. [1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html [2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.htmlSuggested-by:
Marco Elver <elver@google.com> Signed-off-by:
George Popescu <georgepope@android.com> Signed-off-by:
David Brazdil <dbrazdil@google.com> Reviewed-by:
-
Elena Petrova authored
in_ubsan field of task_struct is only used in lib/ubsan.c, which in its turn is used only `ifneq ($(CONFIG_UBSAN_TRAP),y)`. Removing unnecessary field from a task_struct will help preserve the ABI between vanilla and CONFIG_UBSAN_TRAP'ed kernels. In particular, this will help enabling bounds sanitizer transparently for Android's GKI. Signed-off-by:
Elena Petrova <lenaptr@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Jann Horn <jannh@google.com> Link: https://lkml.kernel.org/r/20200910134802.3160311-1-lenaptr@google.comSigned-off-by:
-
Ritesh Harjani authored
With the patch. <e.g. o/p> TASK PID COMM 0xffffffff82c2b8c0 0 swapper/0 0xffff888a0ba20040 1 systemd 0xffff888a0ba24040 2 kthreadd 0xffff888a0ba28040 3 rcu_gp w/o 0xffffffff82c2b8c0 <init_task> 0 swapper/0 0xffff888a0ba20040 1 systemd 0xffff888a0ba24040 2 kthreadd 0xffff888a0ba28040 3 rcu_gp Signed-off-by:Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Link: http://lkml.kernel.org/r/54c868c79b5fc364a8be7799891934a6fe6d1464.1597742951.git.riteshh@linux.ibm.comSigned-off-by:
-
Ritesh Harjani authored
This is many times found useful while debugging some FS related issue. <e.g. output> mount super_block devname pathname fstype options 0xffff888a0bfa4b40 0xffff888a0bfc1000 none / rootfs rw 0 0 0xffff888a033f75c0 0xffff8889fcf65000 /dev/root / ext4 rw,relatime 0 0 0xffff8889fc8ce040 0xffff888a0bb51000 devtmpfs /dev devtmpfs rw,relatime 0 0 Signed-off-by: -
Sudip Mukherjee authored
The variable 'consumed' is initialized with the consumed count but immediately after that the consumed count is updated and assigned to 'consumed' again thus overwriting the previous value. So, drop the unneeded initialization. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Alexey Kardashevskiy authored
Currently we print stack and registers for ordinary warnings but we do not for panic_on_warn which looks as oversight - panic() will reboot the machine but won't print registers. This moves printing of registers and modules earlier. This does not move the stack dumping as panic() dumps it. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Jing Xiangfeng authored
rio_mport_add_riodev() misses to call put_device() when the device already exists. Add the missed function call to fix it. Fixes: e8de3701 ("rapidio: add mport char device driver") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lkml.kernel.org/r/20200922072525.42330-1-jingxiangfeng@huawei.comSigned-off-by:
-
Souptick Joarder authored
rio_dma_transfer() attempts to clamp the return value of pin_user_pages_fast() to be >= 0. However, the attempt fails because nr_pages is overridden a few lines later, and restored to the undesirable -ERRNO value. The return value is ultimately stored in nr_pages, which in turn is passed to unpin_user_pages(), which expects nr_pages >= 0, else, disaster. Fix this by fixing the nesting of the assignment to nr_pages: nr_pages should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set to the return value of pin_user_pages_fast(), otherwise. [jhubbard@nvidia.com: new changelog] Fixes: e8de3701 ("rapidio: add mport char device driver") Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lkml.kernel.org/r/1600227737-20785-1-git-send-email-jrdr.linux@gmail.comSigned-off-by:
-
Wang Hai authored
Fixes the following W=1 kernel build warning(s): fs/nilfs2/bmap.c:378: warning: Excess function parameter 'bhp' description in 'nilfs_bmap_assign' fs/nilfs2/cpfile.c:907: warning: Excess function parameter 'status' description in 'nilfs_cpfile_change_cpmode' fs/nilfs2/cpfile.c:946: warning: Excess function parameter 'stat' description in 'nilfs_cpfile_get_stat' fs/nilfs2/page.c:76: warning: Excess function parameter 'inode' description in 'nilfs_forget_buffer' fs/nilfs2/sufile.c:563: warning: Excess function parameter 'stat' description in 'nilfs_sufile_get_stat' Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by:
-
Matthew Wilcox authored
The table of ioctl functions should be marked const in order to put them in read-only memory, and we should use array_index_nospec() to avoid speculation disclosing the contents of kernel memory to userspace. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Ian Kent <raven@themaw.net> Link: https://lkml.kernel.org/r/20200818122203.GO17456@casper.infradead.orgSigned-off-by:
-
Matthew Wilcox (Oracle) authored
ramfs needs to check that pages are both physically contiguous and contiguous in the file. If the page cache happens to have, eg, page A for index 0 of the file, no page for index 1, and page A+1 for index 2, then an mmap of the first two pages of the file will succeed when it should fail. Fixes: 642fb4d1 ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs") Signed-off-by:
-
Jann Horn authored
The preceding patches have ensured that core dumping properly takes the mmap_lock. Thanks to that, we can now remove mmget_still_valid() and all its users. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Jann Horn authored
Properly take the mmap_lock before calling into the GUP code from get_dump_page(); and play nice, allowing the GUP code to drop the mmap_lock if it has to sleep. As Linus pointed out, we don't actually need the VMA because __get_user_pages() will flush the dcache for us if necessary. Signed-off-by:
-
Jann Horn authored
In both binfmt_elf and binfmt_elf_fdpic, use a new helper dump_vma_snapshot() to take a snapshot of the VMA list (including the gate VMA, if we have one) while protected by the mmap_lock, and then use that snapshot instead of walking the VMA list without locking. An alternative approach would be to keep the mmap_lock held across the entire core dumping operation; however, keeping the mmap_lock locked while we may be blocked for an unbounded amount of time (e.g. because we're dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock blocks things like the ->release handler of userfaultfd, and we don't really want critical system daemons to grind to a halt just because someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or something like that. Since both the normal ELF code and the FDPIC ELF code need this functionality (and if any other binfmt wants to add coredump support in the future, they'd probably need it, too), implement this with a common helper in fs/coredump.c. A downside of this approach is that we now need a bigger amount of kernel memory per userspace VMA in the normal ELF case, and that we need O(n) kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't be terribly bad. There currently is a data race between stack expansion and anything that reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to mitigate that for core dumping, take the mmap_lock in write mode when taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in read mode, we could end up with a corrupted core dump if someone does get_user_pages_remote() concurrently. Not really a major problem, but taking the mmap_lock either way works here, so we might as well avoid the issue.) (This doesn't do anything about the existing data races with stack expansion in other mm code.) Signed-off-by:
-
Jann Horn authored
At the moment, the binfmt_elf and binfmt_elf_fdpic code have slightly different code to figure out which VMAs should be dumped, and if so, whether the dump should contain the entire VMA or just its first page. Eliminate duplicate code by reworking the binfmt_elf version into a generic core dumping helper in coredump.c. As part of that, change the heuristic for detecting executable/library header pages to check whether the inode is executable instead of looking at the file mode. This is less problematic in terms of locking because it lets us avoid get_user() under the mmap_sem. (And arguably it looks nicer and makes more sense in generic code.) Adjust a little bit based on the binfmt_elf_fdpic version: ->anon_vma is only meaningful under CONFIG_MMU, otherwise we have to assume that the VMA has been written to. Suggested-by:
-
Jann Horn authored
Both fs/binfmt_elf.c and fs/binfmt_elf_fdpic.c need to dump ranges of pages into the coredump file. Extract that logic into a common helper. Signed-off-by:
-
Jann Horn authored
dump_emit() has a retry loop, but there seems to be no way for that retry logic to actually be used; and it was also buggy, writing the same data repeatedly after a short write. Let's just bail out on a short write. Suggested-by:
-
Jann Horn authored
Patch series "Fix ELF / FDPIC ELF core dumping, and use mmap_lock properly in there", v5. At the moment, we have that rather ugly mmget_still_valid() helper to work around <https://crbug.com/project-zero/1790>: ELF core dumping doesn't take the mmap_sem while traversing the task's VMAs, and if anything (like userfaultfd) then remotely messes with the VMA tree, fireworks ensue. So at the moment we use mmget_still_valid() to bail out in any writers that might be operating on a remote mm's VMAs. With this series, I'm trying to get rid of the need for that as cleanly as possible. ("cleanly" meaning "avoid holding the mmap_lock across unbounded sleeps".) Patches 1, 2, 3 and 4 are relatively unrelated cleanups in the core dumping code. Patches 5 and 6 implement the main change: Instead of repeatedly accessing the VMA list with sleeps in between, we snapshot it at the start with proper locking, and then later we just use our copy of the VMA list. This ensures that the kernel won't crash, that VMA metadata in the coredump is consistent even in the presence of concurrent modifications, and that any virtual addresses that aren't being concurrently modified have their contents show up in the core dump properly. The disadvantage of this approach is that we need a bit more memory during core dumping for storing metadata about all VMAs. At the end of the series, patch 7 removes the old workaround for this issue (mmget_still_valid()). I have tested: - Creating a simple core dump on X86-64 still works. - The created coredump on X86-64 opens in GDB and looks plausible. - X86-64 core dumps contain the first page for executable mappings at offset 0, and don't contain the first page for non-executable file mappings or executable mappings at offset !=0. - NOMMU 32-bit ARM can still generate plausible-looking core dumps through the FDPIC implementation. (I can't test this with GDB because GDB is missing some structure definition for nommu ARM, but I've poked around in the hexdump and it looked decent.) This patch (of 7): dump_emit() is for kernel pointers, and VMAs describe userspace memory. Let's be tidy here and avoid accessing userspace pointers under KERNEL_DS, even if it probably doesn't matter much on !MMU systems - especially given that it looks like we can just use the same get_dump_page() as on MMU if we move it out of the CONFIG_MMU block. One small change we have to make in get_dump_page() is to use __get_user_pages_locked() instead of __get_user_pages(), since the latter doesn't exist on nommu. On mmu builds, __get_user_pages_locked() will just call __get_user_pages() for us. Signed-off-by:
-
Chris Kennelly authored
This produces a PIE binary with a variety of p_align requirements, suitable for verifying that the load address meets that alignment requirement. Signed-off-by:
Chris Kennelly <ckennelly@google.com> Signed-off-by:
-
Chris Kennelly authored
Patch series "Selecting Load Addresses According to p_align", v3. The current ELF loading mechancism provides page-aligned mappings. This can lead to the program being loaded in a way unsuitable for file-backed, transparent huge pages when handling PIE executables. While specifying -z,max-page-size=0x200000 to the linker will generate suitably aligned segments for huge pages on x86_64, the executable needs to be loaded at a suitably aligned address as well. This alignment requires the binary's cooperation, as distinct segments need to be appropriately paddded to be eligible for THP. For binaries built with increased alignment, this limits the number of bits usable for ASLR, but provides some randomization over using fixed load addresses/non-PIE binaries. This patch (of 2): The current ELF loading mechancism provides page-aligned mappings. This can lead to the program being loaded in a way unsuitable for file-backed, transparent huge pages when handling PIE executables. For binaries built with increased alignment, this limits the number of bits usable for ASLR, but provides some randomization over using fixed load addresses/non-PIE binaries. Tested by verifying program with -Wl,-z,max-page-size=0x200000 loading. [akpm@linux-foundation.org: fix max() warning] [ckennelly@google.com: augment comment] Link: https://lkml.kernel.org/r/20200821233848.3904680-2-ckennelly@google.comSigned-off-by:
-
Dwaipayan Ray authored
The author signed-off-by checks are currently very vague. Cases like same name or same address are not handled separately. For example, running checkpatch on commit be6577af ("parisc: Add atomic64_set_release() define to avoid CPU soft lockups"), gives: WARNING: Missing Signed-off-by: line by nominal patch author 'John David Anglin <dave.anglin@bell.net>' The signoff line was: "Signed-off-by: Dave Anglin <dave.anglin@bell.net>" Clearly the author has signed off but with a slightly different version of his name. A more appropriate warning would have been to point out at the name mismatch instead. Previously, the values assumed by $authorsignoff were either 0 or 1 to indicate whether a proper sign off by author is present. Extended the checks to handle four new cases. $authorsignoff values now denote the following: 0: Missing sign off by patch author. 1: Sign off present and identical. 2: Addresses and names match, but comments differ. "James Watson(JW) <james@gmail.com>", "James Watson <james@gmail.com>" 3: Addresses match, but names are different. "James Watson <james@gmail.com>", "James <james@gmail.com>" 4: Names match, but addresses are different. "James Watson <james@watson.com>", "James Watson <james@gmail.com>" 5: Names match, addresses excluding subaddress details (RFC 5233) match. "James Watson <james@gmail.com>", "James Watson <james+a@gmail.com>" Also introduced a new message type FROM_SIGN_OFF_MISMATCH for cases 2, 3, 4 and 5. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Dwaipayan Ray <dwaipayanray1@gmail.com> Signed-off-by:
-
Łukasz Stelmach authored
To avoid false positives in presence of SPDX-License-Identifier in networking files it is required to increase the leeway for empty block comment lines by one line. For example, checking drivers/net/loopback.c which starts with // SPDX-License-Identifier: GPL-2.0-or-later /* * INET An implementation of the TCP/IP protocol suite for the LINUX rsults in an unnecessary warning WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX Signed-off-by:Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Dwaipayan Ray authored
Checkpatch.pl doesn't have a check for excluding while (...) {...} blocks from MULTISTATEMENT_MACRO_USE_DO_WHILE error. For example, running checkpatch.pl on the file mm/maccess.c in the kernel generates the following error: ERROR: Macros with complex values should be enclosed in parentheses +#define copy_from_kernel_nofault_loop(dst, src, len, type, err_label) \ + while (len >= sizeof(type)) { \ + __get_kernel_nofault(dst, src, type, err_label); \ + dst += sizeof(type); \ + src += sizeof(type); \ + len -= sizeof(type); \ + } The error is misleading for this case. Enclosing it in parentheses doesn't make any sense. Checkpatch already has an exception list for such common macro types. Added a new exception for while (...) {...} style blocks to the same. In addition, the brace flatten logic was modified by changing the substitution characters from "1" to "1u". This was done to ensure that macros in the form "#define foo(bar) while(bar){bar--;}" were also correctly procecssed. Link: https://lore.kernel.org/linux-kernel-mentees/dc985938aa3986702815a0bd68dfca8a03c85447.camel@perches.com/Suggested-by:
-
