- 23 May, 2014 40 commits
-
-
Daeseok Youn authored
clean up checkpatch.pl warning: WARNING: please no spaces at the start of a line in Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dominique van den Broeck authored
Style-only modifications to comply with checkpatch.pl --strict --file. . Correctly realigns the lines that needed to be ; . Suppress useless blank rows ; . Fix sizeof() issues in various -malloc() functions. Signed-off-by:
Dominique van den Broeck <domdevlin@free.fr> Signed-off-by:
-
Dominique van den Broeck authored
Style-only modifications to comply with checkpatch.pl --strict --file. . Adds every missing brace in condition statements. Signed-off-by:
-
Bastien Armand authored
This patch fix a regression in lcd_write caused by commit 70a8c3ebSigned-off-by:
Bastien Armand <armand.bastien@laposte.net> Signed-off-by:
-
Rusty Russell authored
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Christopher Brannon <chris@the-brannons.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Dominique van den Broeck authored
. userspace pointer dereference ; These issues have been fixed by a concurrent patch: . missing inclusions of needed header files (fixed by concurrent patch); . unrequired static function declaration (confusing another *.c file). Signed-off-by:
-
Kim Nylund authored
This is a new device supported by this driver. Signed-off-by:
Kim Nylund <kim@pratsam.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Larry Finger authored
In a patch entitles "staging: r8188eu: Fix case where ethtype was never obtained and always be checked against 0" (commit ID unknown), I introduce an endian error. This patch fixes that, and removes two additional sparse warnings. drivers/staging/rtl8188eu/core/rtw_recv.c:653:6: warning: symbol 'process_pwrbit_data' was not declared. Should it be static? drivers/staging/rtl8188eu/core/rtw_recv.c:1828:5: warning: symbol 'enqueue_reorder_recvframe' was not declared. Should it be static? Reported-by:
-
Ken Cox authored
There is not any code using the functionality in filexfer.c so I removed it and filexfer.h. Signed-off-by:
Ken Cox <jkc@redhat.com> Signed-off-by:
-
Ken Cox authored
Fixed the usage of the following so they don't try to dereference pointers to iomem. CHANNEL_U64_MISMATCH CHANNEL_U32_MISMATCH wait_for_valid_guid Signed-off-by:
-
Ken Cox authored
VISORCHANNEL_CHANGE_SERVER_STATE and VISORCHANNEL_CHANGE_CLIENT_STATE are never used in any of the source so they have been removed. VISORCHANNEL_CHANGE_CLIENT_STATE would have caused a broken kernel build after commit a8d7f21d, but since it was never used the kernel continued to build. Reported-by:
-
Ken Cox authored
virthba_queue_command() is only used inside virthba.c so declare it static. Signed-off-by:
-
Ken Cox authored
Fix sparse warnings caused by incorrect references to IO space. Signed-off-by:
-
David Matlack authored
slic_config_get() can fail. Change the return type from void to int and handle the error in slic_card_init(). So now, instead of silently failing (and then timing out waiting for the config data), the driver will fail loudly at request time. Signed-off-by:
David Matlack <matlackdavid@gmail.com> Signed-off-by:
-
David Matlack authored
Remove fail_on_bad_eeprom, which was always 0 and thus being used to ignore incorrect checksumming. This means devices with corrupt eeprom will now cause the driver to fail. Since fail_on_bad_eeprom was the last member in use of struct slic_reg_params, remove that struct altogether. Signed-off-by:
-
David Matlack authored
Rewrite slic_eeprom_cksum() to fix bugs and make readable. This patch technically has no effect on the user as failed eeprom checksums are ignored anyway. The original implementation had the following issues: 1. 2 of the 3 unrolled loops had the following bug: while ((len -= 32) >= 0) { [...] sum += w[15]; w = (u16 *)((ulong) w + 16); /* verify */ } This processes 32-bytes of data but only increments the word pointer by 16 bytes. Fixing both of these bugs seems to fix slic_eeprom_cksum(). 2. Non-descriptive variable names, use of unions, and macros that change local state make the code difficult to read. 3. The checksum loop is unrolled which makes the code harder to reason about while providing small performance improvement: - max eeprom length is 0x80 bytes (MAX_EECODE_SIZE), that's only 0x40 iterations - checksum is only computed during pci probe(), so not very often Tested on Mojave card Signed-off-by: -
David Matlack authored
This patch fixes a use-after-free bug that causes a null pointer dereference in slic_entry_halt. Since unregister_netdev() will ultimately call slic_entry_halt (the net_device ndo_stop() virtual function for this device), we should call it before freeing the memory used by slic_entry_halt. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
David Matlack authored
This patch fixes a bug that only manifests when the physical address of the interrupt status register is >4GB. Specifically, the driver was only telling the device about the lower 32 bits of the ISR. This patch adds the upper 32 bits. Signed-off-by:
-
David Matlack authored
This patch fixes a memory leak in slic_card_init. If the driver fails to poll for an interrupt after requesting config data from the device the dma memory is never freed. Signed-off-by:
-
David Matlack authored
As per the TODO file, this patch removes the gratuitous debug infrastructure. As an extra incentive for removing this code, the debugfs files are not cleaned up properly. For example, if register_netdev() fails in slic_entry_probe() then all debugfs files get left behind, even after the driver module is unloaded. Touching these files quickly leads to an oops. Signed-off-by:
-
David Matlack authored
This patch removes two fields from the private "struct adapter". Specifically, memorybase duplicate of slic_regs memorylength written once and never read. This field is trivially computed with pci_resource_len if it's ever needed in the future. Signed-off-by: -
David Matlack authored
This patch fixes two free-after-free bugs in slic_entry_remove. Specifically, slic_unmap_mmio_space() iounmaps adapter->slic_regs, which is the same region of memory as dev->base_addr (iounmap-ed a few lines later). Next, both release_mem_region() and pci_release_regions() are called on the same pci_dev struct. Signed-off-by:
-
David Matlack authored
This patch fixes a use-after-free bug that can cause a kernel oops. If slic_card_init fails then slic_entry_probe (the pci probe() function for this device) will return error without cleaning up memory. Signed-off-by:
-
Paul McQuade authored
return value instead of function. Signed-off-by:
Paul McQuade <paulmcquad@gmail.com> Signed-off-by:
-
Benoit Taine authored
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci, and tested by compilation. Signed-off-by:
Benoit Taine <benoit.taine@lip6.fr> Signed-off-by:
-
Joe Perches authored
Use proper line terminations. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Karim Raslan authored
This should fix a few sparse warnings like the following: CHECK drivers/staging/rtl8723au/core/rtw_ap.c drivers/staging/rtl8723au/core/rtw_ap.c:1054:45: warning: incorrect type in argument 3 (different base types) drivers/staging/rtl8723au/core/rtw_ap.c:1054:45: expected int [signed] gfp drivers/staging/rtl8723au/core/rtw_ap.c:1054:45: got restricted gfp_t Signed-off-by:
Karim Raslan <karim.allah.ahmed@gmail.com> Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Use struct ieee80211_mgmt to parse action frame. In addition remove unused functions rtw_cfg80211_rx_p2p_action_public() and rtw_cfg80211_rx_action_p2p() Signed-off-by:
-
Jes Sorensen authored
In addition remove excessive brackets. Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
In addition get rid of a couple of empty *_event_callback() handlers and use dummy_event_callback() instead. Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
