- 03 Jul, 2006 10 commits
-
-
Stefan Richter authored
Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Ben Collins <bcollins@ubuntu.com>
-
Stefan Richter authored
The last loop in ieee1394 core's speed calculation is not required unless ieee1394.h::IEEE1394_SPEED_MAX is changed from its current value of 3. Signed-off-by:
-
Stefan Richter authored
This variant of calculate_expire() is more correct and easier to read. Signed-off-by:
-
Stefan Richter authored
At least Maxtor OneTouch III require a "start stop unit" command after auto spin-down before the next access can proceed. This patch activates the responsible code in scsi_mod for all Maxtor SBP-2 disks. https://bugzilla.novell.com/show_bug.cgi?id=183011 Maybe that should be done for all SBP-2 disks, but better be cautious. Signed-off-by:
-
Stefan Richter authored
If ieee1394.h::IEEE1394_SPEED_MAX is bigger than the actual speed of an 1394b host adapter and the speed to another 1394b node was probed, a bigger speed than actually used was kept in host->speed[n]. The only resulting problem so far was sbp2 displaying bogus values in the syslog, e.g. S3200 for actual S800 connections if IEEE1394_SPEED_MAX was S3200. But other high-level drivers which access this field could get into more trouble. (Eth1394 is the only other in-tree driver which does so. It seems it is not affected.) Nodemgr now clips this value according to the host adapter's link speed. A pointer expression in nodemgr_check_speed is also changed for clarity. Signed-off-by:
-
Thomas Gleixner authored
ARM devel merge introduced new machine functionality which was not covered by the ARM -> genirq patches. Fix it up and make it compile again. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Thomas Gleixner authored
For several proc-<cputype>.S files the include of proc-macros.S is missing. Make it compile and work again. Signed-off-by:
-
Thomas Gleixner authored
The irqflags consolidation converted SA_PERCPU_IRQ to IRQF_PERCPU but did not define the new constant. Signed-off-by:
-
Thomas Gleixner authored
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Linus: "The hacks in kernel/irq/handle.c are really horrid. REALLY horrid." They are indeed. Move the dyntick quirks to ARM where they belong. Signed-off-by:
-
- 02 Jul, 2006 30 commits
-
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] sdhci: remove duplicate error message [MMC] sdhci: force DMA on some controllers [MMC] sdhci: quirk for broken reset [MMC] sdhci: Add SDHCI controller ids
-
Dominik Hackl authored
This fixes a bug in fs/nfs which makes it impossible to build nfs without having procfs enabled. Signed-off-by:
Dominik Hackl <dominik@hackl.dhs.org> Signed-off-by:
-
Linus Torvalds authored
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] sdhci: version bump sdhci [MMC] sdhci: support controller specific quirks [MMC] sdhci: more DMA capabilities tests [MMC] sdhci: reset sdhci controller early [MMC] sdhci: check controller version [MMC] sdhci: check only relevant inhibit bits [MMC] sdhci: Test for invalid block size [MMC] sdhci: Avoid sdhci DMA boundaries [MMC] Fix sdhci PIO routines [MMC] sdhci: fix interrupt handling [MMC] sdhci: correct register order [MMC] sdhci: proper timeout handling [MMC] sdhci: fix sdhci reset timeout [MMC] sdhci: fix timeout loops in sdhci [MMC] sdhci: support for multiple voltages [MMC] sdhci: print device id [MMC] sdhci: check SDHCI base clock
-
Thomas Gleixner authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
