Current controller interrogation requires a lot of guesswork
on how many io queues were created and what the io sq size is.
The numbers are dependent upon core/fabric defaults, connect
arguments, and target responses.

Add sysfs attributes for queue_count and sqsize.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

It is not possible to get 64-bit results from the passthru commands,
what prevents from getting for the Capabilities (CAP) property value.

As a result, it is not possible to implement IOL's NVMe Conformance
test 4.3 Case 1 for Fabrics targets [1] (page 123).

This issue has been already discussed [2], but without a solution.

This patch solves the problem by adding new ioctls with a new
passthru structure, including 64-bit results. The older ioctls stay
unchanged.

[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf
[2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.htmlSigned-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Kingston NVME SSD with firmware version E8FK11.T has no interrupt after
resume with actions related to suspend to idle. This patch applied
NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.

Fixes: d916b1be ("nvme-pci: use host managed power state for suspend")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Now that sgl_free is null safe, drop the superflous check.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Booting with default_ps_max_latency_us >6000 makes the device fail.
Also SUBNQN is NULL and gives a warning on each boot/resume.
 $ nvme id-ctrl /dev/nvme0 | grep ^subnqn
   subnqn    : (null)

I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop.
To be sure is not a Laptop issue only, I tested the device on
my server board  with the same results.
( with 2x,4x link on the board and 4x link on a PCI-E card ).
Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

By default, the NVMe/RDMA driver should support max io_size of 1MiB (or
upto the maximum supported size by the HCA). Currently, one will see that
/sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.

A non power of 2 value can cause performance degradation due to
unnecessary splitting of IO requests and unoptimized allocation units.

The number of pages per MR has been fixed here, so there is no longer any
need to reduce max_sectors by 1.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

"ret" should be a negative error code here, but it's either success or
possibly uninitialized.

Fixes: 32fd90c4 ("nvme: change locking for the per-subsystem controller list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

The action of saving the PCI state will cause numerous PCI configuration
space reads which depending upon the vendor implementation may cause
the drive to exit the deepest NVMe state.

In these cases ASPM will typically resolve the PCIe link state and APST
may resolve the NVMe power state.  However it has also been observed
that this register access after quiesced will cause PC10 failure
on some device combinations.

To resolve this, move the PCI state saving to before SetFeatures has been
called.  This has been proven to resolve the issue across a 5000 sample
test on previously failing disk/system combinations.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Allow the do/while statement to continue if current time
is not after the proposed time 'deadline'. Intent is to
allow loop to proceed for a specific time period. Currently
the loop, as coded, will exit after first pass.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

User space programs like udevd may try to read to partitions at the
same time the driver detects a namespace is unusable, and may deadlock
if revalidate_disk() is called while such a process is waiting to
enter the frozen queue. On detecting a dead namespace, move the disk
revalidate after unblocking dispatchers that may be holding bd_butex.

changelog Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

In nvmet_bdev_set_limits() the number of logical blocks per
physical block is calculated, but the opposite is mentioned in
the associated comment and reflected in the variable name. Correct
the comment and adjust the variable name to reflect the calculation
done.
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Make sure that bsg_queue_rq() calls put_device() if an error is
encountered after get_device() was successful.

Fixes: cd2f076f ("bsg: convert to use blk-mq")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Changing the switch() statement to symbolic constants made the compiler
(at least clang-9, did not check gcc) notice that there is one enum value
that is not handled here:

block/t10-pi.c:62:11: error: enumeration value 'T10_PI_TYPE0_PROTECTION'
not handled in switch [-Werror,-Wswitch]

Add a BUG_ON statement if we ever get to t10_pi_verify function with
TYPE0 and replace the switch() statement with if/else clause for the
valid types.

Fixes: 9b2061b1a262 ("block: use symbolic constants for t10_pi type")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Anatoly reports that he gets the below warning when booting -git on
a sparc64 box on debian unstable:

...
[   13.352975] aes_sparc64: Using sparc64 aes opcodes optimized AES
implementation
[   13.428002] ------------[ cut here ]------------
[   13.428081] WARNING: CPU: 21 PID: 586 at
drivers/block/pktcdvd.c:2597 pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428147] Attempt to register a non-SCSI queue
[   13.428184] Modules linked in: pktcdvd libdes cdrom aes_sparc64
n2_rng md5_sparc64 sha512_sparc64 rng_core sha256_sparc64 flash
sha1_sparc64 ip_tables x_tables ipv6 crc_ccitt nf_defrag_ipv6 autofs4
ext4 crc16 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy
async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear
md_mod crc32c_sparc64
[   13.428452] CPU: 21 PID: 586 Comm: pktsetup Not tainted
5.3.0-10169-g574cc453 #1234
[   13.428507] Call Trace:
[   13.428542]  [00000000004635c0] __warn+0xc0/0x100
[   13.428582]  [0000000000463634] warn_slowpath_fmt+0x34/0x60
[   13.428626]  [000000001045b244] pkt_setup_dev+0x2e4/0x5a0 [pktcdvd]
[   13.428674]  [000000001045ccf4] pkt_ctl_ioctl+0x94/0x220 [pktcdvd]
[   13.428724]  [00000000006b95c8] do_vfs_ioctl+0x628/0x6e0
[   13.428764]  [00000000006b96c8] ksys_ioctl+0x48/0x80
[   13.428803]  [00000000006b9714] sys_ioctl+0x14/0x40
[   13.428847]  [0000000000406294] linux_sparc_syscall+0x34/0x44
[   13.428890] irq event stamp: 4181
[   13.428924] hardirqs last  enabled at (4189): [<00000000004e0a74>]
console_unlock+0x634/0x6c0
[   13.428984] hardirqs last disabled at (4196): [<00000000004e0540>]
console_unlock+0x100/0x6c0
[   13.429048] softirqs last  enabled at (3978): [<0000000000b2e2d8>]
__do_softirq+0x498/0x520
[   13.429110] softirqs last disabled at (3967): [<000000000042cfb4>]
do_softirq_own_stack+0x34/0x60
[   13.429172] ---[ end trace 2220ca468f32967d ]---
[   13.430018] pktcdvd: setup of pktcdvd device failed
[   13.455589] des_sparc64: Using sparc64 des opcodes optimized DES
implementation
[   13.515334] camellia_sparc64: Using sparc64 camellia opcodes
optimized CAMELLIA implementation
[   13.522856] pktcdvd: setup of pktcdvd device failed
[   13.529327] pktcdvd: setup of pktcdvd device failed
[   13.532932] pktcdvd: setup of pktcdvd device failed
[   13.536165] pktcdvd: setup of pktcdvd device failed
[   13.539372] pktcdvd: setup of pktcdvd device failed
[   13.542834] pktcdvd: setup of pktcdvd device failed
[   13.546536] pktcdvd: setup of pktcdvd device failed
[   15.431071] XFS (dm-0): Mounting V5 Filesystem
...

Apparently debian auto-attaches any cdrom like device to pktcdvd, which
can lead to the above warning. There's really no reason to warn for this
situation, kill it.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Each iteration of for_each_child_of_node puts the previous node, but
in the case of a goto from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before three such goto
statements.
Issue found with Coccinelle.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
time when the socket is closed due to the server daemon is restarted,
just before the last DISCONNET is totally done if we start a new connection
by using the old nbd_index, there will be crashing randomly, like:

<3>[  110.151949] block nbd1: Receive control failed (result -32)
<1>[  110.152024] BUG: unable to handle page fault for address: 0000058000000840
<1>[  110.152063] #PF: supervisor read access in kernel mode
<1>[  110.152083] #PF: error_code(0x0000) - not-present page
<6>[  110.152094] PGD 0 P4D 0
<4>[  110.152106] Oops: 0000 [#1] SMP PTI
<4>[  110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
<4>[  110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
<4>[  110.152166] Workqueue: knbd-recv recv_work [nbd]
<4>[  110.152187] RIP: 0010:__dev_printk+0xd/0x67
<4>[  110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
<4>[  110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
<4>[  110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
<4>[  110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
<4>[  110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
<4>[  110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
<4>[  110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
<4>[  110.152329] FS:  0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
<4>[  110.152362] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
<4>[  110.152401] Call Trace:
<4>[  110.152422]  _dev_err+0x6c/0x83
<4>[  110.152435]  nbd_read_stat.cold+0xda/0x578 [nbd]
<4>[  110.152448]  ? __switch_to_asm+0x34/0x70
<4>[  110.152468]  ? __switch_to_asm+0x40/0x70
<4>[  110.152478]  ? __switch_to_asm+0x34/0x70
<4>[  110.152491]  ? __switch_to_asm+0x40/0x70
<4>[  110.152501]  ? __switch_to_asm+0x34/0x70
<4>[  110.152511]  ? __switch_to_asm+0x40/0x70
<4>[  110.152522]  ? __switch_to_asm+0x34/0x70
<4>[  110.152533]  recv_work+0x35/0x9e [nbd]
<4>[  110.152547]  process_one_work+0x19d/0x340
<4>[  110.152558]  worker_thread+0x50/0x3b0
<4>[  110.152568]  kthread+0xfb/0x130
<4>[  110.152577]  ? process_one_work+0x340/0x340
<4>[  110.152609]  ? kthread_park+0x80/0x80
<4>[  110.152637]  ret_from_fork+0x35/0x40

This is very easy to reproduce by running the nbd-runner.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Preparing for the destory when disconnecting crash fixing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If equal to 0, the injection limit for a bfq_queue is pushed to 1
after a first sample of the total service time of the I/O requests of
the queue is computed (to allow injection to start). Yet, because of a
mistake in the branch that performs this action, the push may happen
also in some other case. This commit fixes this issue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The update period of the injection limit has been tentatively set to
100 ms, to reduce fluctuations. This value however proved to cause,
occasionally, the limit to be decremented for some bfq_queue only
after the queue underwent excessive injection for a lot of time. This
commit reduces the period to 10 ms.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Upon an increment attempt of the injection limit, the latter is
constrained not to become higher than twice the maximum number
max_rq_in_driver of I/O requests that have happened to be in service
in the drive. This high bound allows the injection limit to grow
beyond max_rq_in_driver, which may then cause max_rq_in_driver itself
to grow.

However, since the limit is incremented by only one unit at a time,
there is no need for such a high bound, and just max_rq_in_driver+1 is
enough.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

BFQ updates the injection limit of each bfq_queue as a function of how
much the limit inflates the service times experienced by the I/O
requests of the queue. So only service times affected by injection
must be taken into account. Unfortunately, in the current
implementation of this update scheme, the service time of an I/O
request rq not affected by injection may happen to be considered in
the following case: there is no I/O request in service when rq
arrives.

This commit fixes this issue by making sure that only service times
affected by injection are considered for updating the injection
limit. In particular, the service time of an I/O request rq is now
considered only if at least one of the following two conditions holds:
- the destination bfq_queue for rq underwent injection before rq
arrival, and there is still I/O in service in the drive on rq arrival
(the service of such unfinished I/O may delay the service of rq);
- injection occurs between the arrival and the completion time of rq.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>

Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Replace all hard-coded values with T10_PI_TYPES to make the code more
readable.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...

Pull libata updates from Jens Axboe:

 - Kill unused export (Andy)

 - Use dma_set_mask_and_coherent() throughout (Christoph)

 - Drop PCS quirk on Denverton, which has different register layout
   (Dan)

 - Support non-boot time detection for pata_buddha (Max)

* tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block:
  libata/ahci: Drop PCS quirk for Denverton and beyond
  ahci: Do not export local variable ahci_em_messages
  libata: switch remaining drivers to use dma_set_mask_and_coherent
  sata_sil24: use dma_set_mask_and_coherent
  sata_qstor: use dma_set_mask_and_coherent
  sata_nv: use dma_set_mask_and_coherent
  sata_mv: use dma_set_mask_and_coherent
  pdc_adma: use dma_set_mask_and_coherent
  ahci: use dma_set_mask_and_coherent
  acard_ahci: use dma_set_mask_and_coherent
  ata/pata_buddha: Probe via modalias instead of initcall

Pull io_uring updates from Jens Axboe:

 - Allocate SQ/CQ ring together, more efficient. Expose this through a
   feature flag as well, so we can reduce the number of mmaps by 1
   (Hristo and me)

 - Fix for sequence logic with SQ thread (Jackie).

 - Add support for links with drain commands (Jackie).

 - Improved async merging (me)

 - Improved buffered async write performance (me)

 - Support SQ poll wakeup + event get in single io_uring_enter() (me)

 - Support larger SQ ring size. For epoll conversions, the 4k limit was
   too small for some prod workloads (Daniel).

 - put_user_page() usage (John)

* tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block:
  io_uring: increase IORING_MAX_ENTRIES to 32K
  io_uring: make sqpoll wakeup possible with getevents
  io_uring: extend async work merging
  io_uring: limit parallelism of buffered writes
  io_uring: add io_queue_async_work() helper
  io_uring: optimize submit_and_wait API
  io_uring: add support for link with drain
  io_uring: fix wrong sequence setting logic
  io_uring: expose single mmap capability
  io_uring: allocate the two rings together
  fs/io_uring.c: convert put_page() to put_user_page*()

Pull documentation updates from Jonathan Corbet:
 "It's a somewhat calmer cycle for docs this time, as the churn of the
  mass RST conversion is happily mostly behind us.

   - A new document on reproducible builds.

   - We finally got around to zapping the documentation for hardware
     support that was removed in 2004; one doesn't want to rush these
     things.

   - The usual assortment of fixes, typo corrections, etc"

* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
  Documentation: kbuild: Add document about reproducible builds
  docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
  Documentation: Add "earlycon=sbi" to the admin guide
  doc:lock: remove reference to clever use of read-write lock
  devices.txt: improve entry for comedi (char major 98)
  docs: mtd: Update spi nor reference driver
  doc: arm64: fix grammar dtb placed in no attributes region
  Documentation: sysrq: don't recommend 'S' 'U' before 'B'
  mailmap: Update email address for Quentin Perret
  docs: ftrace: clarify when tracing is disabled by the trace file
  docs: process: fix broken link
  Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
  Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
  Documentation/arm/sa1100: Remove some obsolete documentation
  docs/zh_CN: update Chinese howto.rst for latexdocs making
  Documentation: virt: Fix broken reference to virt tree's index
  docs: Fix typo on pull requests guide
  kernel-doc: Allow anonymous enum
  Documentation: sphinx: Don't parse socket() as identifier reference
  Documentation: sphinx: Add missing comma to list of strings
  ...

Pull percpu updates from Dennis Zhou:
 "A couple of updates to clean up the code with no change in behavior"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: Use struct_size() helper
  percpu: fix typo in pcpu_setup_first_chunk() comment
  percpu: Make pcpu_setup_first_chunk() void function

Pull cgroup updates from Tejun Heo:
 "Three minor cleanup patches"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Use kvmalloc in cgroups-v1
  cgroup: minor tweak for logic to get cgroup css
  cgroup: Replace a seq_printf() call by seq_puts() in cgroup_print_ss_mask()

Pull asm-generic updates from Arnd Bergmann:
 "Here are three small cleanup patches for the include/asm-generic
  directory.

  Christoph removes the __ioremap as part of a cleanup, Nico improves
  the constant do_div() optimization, and Denis changes BUG_ON() to be
  consistent with other implementations"

* tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: add unlikely to default BUG_ON(x)
  __div64_const32(): improve the generic C version
  asm-generic: don't provide __ioremap

Pull Xtensa updates from Max Filippov:

 - add support for xtensa call0 ABI in userspace

 - update xtensa virt board DTS for PCI root complex in KIO range

 - remove free_initrd_mem

* tag 'xtensa-20190917' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: virt: move PCI root complex to KIO range
  xtensa: add support for call0 ABI in userspace
  xtensa: clean up PS_WOE_BIT usage
  xtensa: remove free_initrd_mem

Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...

Pull OpenRISC updates from Stafford Horne:
 "Few small things for 5.4:

   - Fixup ethoc ethernet device tree descriptors which were previously
     broken, now ethernet works on FPGAs running OpenRISC!

   - Switch ioremap to use uncached semantics - from Christoph Hellwig"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: map as uncached in ioremap
  or1k: dts: Add ethoc device to SMP devicetree
  or1k: dts: Fix ethoc network configuration in or1ksim devicetree

Pull m68knommu fix from Greg Ungerer:
 "Only a single change, fix up header include in ColdFire specific GPIO
  handling code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire: Include the GPIO driver header

Pull core timer updates from Thomas Gleixner:
 "Timers and timekeeping updates:

   - A large overhaul of the posix CPU timer code which is a preparation
     for moving the CPU timer expiry out into task work so it can be
     properly accounted on the task/process.

     An update to the bogus permission checks will come later during the
     merge window as feedback was not complete before heading of for
     travel.

   - Switch the timerqueue code to use cached rbtrees and get rid of the
     homebrewn caching of the leftmost node.

   - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
     single function

   - Implement the separation of hrtimers to be forced to expire in hard
     interrupt context even when PREEMPT_RT is enabled and mark the
     affected timers accordingly.

   - Implement a mechanism for hrtimers and the timer wheel to protect
     RT against priority inversion and live lock issues when a (hr)timer
     which should be canceled is currently executing the callback.
     Instead of infinitely spinning, the task which tries to cancel the
     timer blocks on a per cpu base expiry lock which is held and
     released by the (hr)timer expiry code.

   - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
     resulting in faster access to timekeeping functions.

   - Updates to various clocksource/clockevent drivers and their device
     tree bindings.

   - The usual small improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  posix-cpu-timers: Fix permission check regression
  posix-cpu-timers: Always clear head pointer on dequeue
  hrtimer: Add a missing bracket and hide `migration_base' on !SMP
  posix-cpu-timers: Make expiry_active check actually work correctly
  posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
  tick: Mark sched_timer to expire in hard interrupt context
  hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
  x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
  posix-cpu-timers: Utilize timerqueue for storage
  posix-cpu-timers: Move state tracking to struct posix_cputimers
  posix-cpu-timers: Deduplicate rlimit handling
  posix-cpu-timers: Remove pointless comparisons
  posix-cpu-timers: Get rid of 64bit divisions
  posix-cpu-timers: Consolidate timer expiry further
  posix-cpu-timers: Get rid of zero checks
  rlimit: Rewrite non-sensical RLIMIT_CPU comment
  posix-cpu-timers: Respect INFINITY for hard RTTIME limit
  posix-cpu-timers: Switch thread group sampling to array
  posix-cpu-timers: Restructure expiry array
  posix-cpu-timers: Remove cputime_expires
  ...

Pull x86 apic updates from Thomas Gleixner:

 - Cleanup the apic IPI implementation by removing duplicated code and
   consolidating the functions into the APIC core.

 - Implement a safe variant of the IPI broadcast mode. Contrary to
   earlier attempts this uses the core tracking of which CPUs have been
   brought online at least once so that a broadcast does not end up in
   some dead end in BIOS/SMM code when the CPU is still waiting for
   init. Once all CPUs have been brought up once, IPI broadcasting is
   enabled. Before that regular one by one IPIs are issued.

 - Drop the paravirt CR8 related functions as they have no user anymore

 - Initialize the APIC TPR to block interrupt 16-31 as they are reserved
   for CPU exceptions and should never be raised by any well behaving
   device.

 - Emit a warning when vector space exhaustion breaks the admin set
   affinity of an interrupt.

 - Make sure to use the NMI fallback when shutdown via reboot vector IPI
   fails. The original code had conditions which prevent the code path
   to be reached.

 - Annotate various APIC config variables as RO after init.

[ The ipi broadcase change came in earlier through the cpu hotplug
  branch, but I left the explanation in the commit message since it was
  shared between the two different branches    - Linus ]

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86/apic/vector: Warn when vector space exhaustion breaks affinity
  x86/apic: Annotate global config variables as "read-only after init"
  x86/apic/x2apic: Implement IPI shorthands support
  x86/apic/flat64: Remove the IPI shorthand decision logic
  x86/apic: Share common IPI helpers
  x86/apic: Remove the shorthand decision logic
  x86/smp: Enhance native_send_call_func_ipi()
  x86/smp: Move smp_function_call implementations into IPI code
  x86/apic: Provide and use helper for send_IPI_allbutself()
  x86/apic: Add static key to Control IPI shorthands
  x86/apic: Move no_ipi_broadcast() out of 32bit
  x86/apic: Add NMI_VECTOR wait to IPI shorthand
  x86/apic: Remove dest argument from __default_send_IPI_shortcut()
  x86/hotplug: Silence APIC and NMI when CPU is dead
  x86/cpu: Move arch_smt_update() to a neutral place
  x86/apic/uv: Make x2apic_extra_bits static
  x86/apic: Consolidate the apic local headers
  x86/apic: Move apic_flat_64 header into apic directory
  x86/apic: Move ipi header into apic directory
  x86/apic: Cleanup the include maze
  ...

Pull core irq updates from Thomas Gleixner:
 "Updates from the irq departement:

   - Update the interrupt spreading code so it handles numa node with
     different CPU counts properly.

   - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
     ranges.

   - Conversion of all alloc_fwnode() users to use physical addresses
     instead of virtual addresses so the virtual addresses are not
     leaked. The physical address is sufficient to identify the
     associated interrupt chip.

   - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.

   - Enforce interrupt threading at compile time if RT is enabled.

   - Small updates and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
  irqdomain: Add the missing assignment of domain->fwnode for named fwnode
  irqchip/mmp: Coexist with GIC root IRQ controller
  irqchip/mmp: Mask off interrupts from other cores
  irqchip/mmp: Add missing chained_irq_{enter,exit}()
  irqchip/mmp: Do not use of_address_to_resource() to get mux regs
  irqchip/meson-gpio: Add support for meson sm1 SoCs
  dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
  genirq/affinity: Remove const qualifier from node_to_cpumask argument
  genirq/affinity: Spread vectors on node according to nr_cpu ratio
  genirq/affinity: Improve __irq_build_affinity_masks()
  irqchip: Remove dev_err() usage after platform_get_irq()
  irqchip: Add include guard to irq-partition-percpu.h
  irqchip/mmp: Do not call irq_set_default_host() on DT platforms
  irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
  irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
  irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
  irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
  irqchip/gic-v3: Add EPPI range support
  ...

Pull x86 interrupt updates from Thomas Gleixner:
 "A small set of changes to simplify and improve the interrupt handling
  in do_IRQ() by moving the common case into common code and thereby
  cleaning it up"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Check for VECTOR_UNUSED directly
  x86/irq: Move IS_ERR_OR_NULL() check into common do_IRQ() code
  x86/irq: Improve definition of VECTOR_SHUTDOWN et al

Pull x86 pti updates from Thomas Gleixner:
 "Two small PTI updates:

   - Handle unaligned addresses gracefully in pti_clone_pagetable(). Not
     an issue with current callers, but a correctness problem. Adds a
     warning so any caller which hands in an unaligned address gets
     pointed out clearly.

   - Prevent PTI functions from being invoked when PTI is disabled at
     boottime. While this does not cause any harm today, it's pointless
     code executed and prone to cause subtle issues if the PTI
     implementation changes internally over time"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pti: Do not invoke PTI functions when PTI is disabled
  x86/mm/pti: Handle unaligned address gracefully in pti_clone_pagetable()

Pull CPU hotplug updates from Thomas Gleixner:
 "A small update for the SMP hotplug code code:

   - Track "booted once" CPUs in a cpumask so the x86 APIC code has an
     easy way to decide whether broadcast IPIs are safe to use or not.

   - Implement a cpumask_or_equal() helper for the IPI broadcast
     evaluation.

     The above two changes have been also pulled into the x86/apic
     branch for implementing the conditional IPI broadcast feature.

   - Cache the number of online CPUs instead of reevaluating it over and
     over. num_online_cpus() is an unreliable snapshot anyway except
     when it is used outside a cpu hotplug locked region. The cached
     access is not changing this, but it's definitely faster than
     calculating the bitmap wheight especially in hot paths"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Cache number of online CPUs
  cpumask: Implement cpumask_or_equal()
  smp/hotplug: Track booted once CPUs in a cpumask