- 03 Apr, 2019 7 commits
-
-
Imre Deak authored
We copied the original state into the atomic state already earlier in the function, so no need to do it a second time. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-3-imre.deak@intel.com
-
Imre Deak authored
The old state will be needed by an upcoming patch to determine if the commit increases or decreases CDCLK, so move the old state to the atomic state (while keeping the new one in dev_priv). cdclk.logical and cdclk.actual in the atomic state isn't used atm anywhere after the atomic check phase, so this should be safe. v2: - Use swap() instead of opencoding it. (Ville) Suggested-by:
-
Ville Syrjälä authored
CDCLK has to be at least twice the BLCK regardless of audio. Audio driver has to probe using this hook and increase the clock even in absence of any display. v2: Use atomic refcount for get_power, put_power so that we can call each once(Abhay). v3: Reset power well 2 to avoid any transaction on iDisp link during cdclk change(Abhay). v4: Remove Power well 2 reset workaround(Ville). v5: Remove unwanted Power well 2 register defined in v4(Abhay). v6: - Use a dedicated flag instead of state->modeset for min CDCLK changes - Make get/put audio power domain symmetric - Rebased on top of intel_wakeref tracking changes. Signed-off-by:Abhay Kumar <abhay.kumar@intel.com> Tested-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-1-imre.deak@intel.com
-
Chris Wilson authored
Use the engine->flags to store whether we want to kick the submission tasklet on receipt of a breadcrumb interrupt, so that this decision can be made by the submission backend and not dependent on a limited feature test within the interrupt handler. This should make it easier to adapt to different submission backends. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Xiaolin Zhang <xiaolin.zhang@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190329154912.13781-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Tvrtko Ursulin authored
Mask need to be initialized to zero since device id checks may not match. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 805446c8 ("drm/i915: Introduce concept of a sub-platform") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Add "_mmio" postfix to be consistent from the init/fini phase they're called from. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Suggested-by:
-
Daniele Ceraolo Spurio authored
Encapsulate the uncore early init and be consistent with the "_early" naming. Signed-off-by:
-
- 02 Apr, 2019 5 commits
-
-
Bob Paauwe authored
Unlike ICL, all of the output ports are combo phys so just return true in intel_port_is_combophy for all EHL ports to indicate that. v2: Return false in intel_port_is_tc since no EHL ports are TC. (Jose) Cc: Jose Souza <jose.souza@intel.com> Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320211547.519266-1-bob.j.paauwe@intel.com
-
Chris Wilson authored
Ideally we only need one semaphore per ring to accommodate waiting on multiple engines in parallel. However, since we do not know which fences we will finally be waiting on, we emit a semaphore for every fence. It turns out to be quite easy to trick ourselves into exhausting our ringbuffer causing an error, just by feeding in a batch that depends on several thousand contexts. Since we never can be waiting on more than one semaphore in parallel (other than perhaps the desire to busywait on multiple engines), just pick the first fence for our semaphore. If we pick the wrong fence to busywait on, we just miss an opportunity to reduce latency. An adaption might be to use sched.flags as either a semaphore counter, or to track the first busywait on each engine, converting it back to a single use bit prior to closing the request. v2: Track first semaphore used per-engine (this caters for our basic igt that semaphores are working). Reported-by:
Mika Kuoppala <mika.kuoppala@intel.com> Testcase: igt/gem_exec_fence/long-history Fixes: e8861964 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+") Signed-off-by:
-
Chris Wilson authored
For more intel_engine_mask_t detangling. This time so that we can use intel_engine_mask_t inside the scheduling structs. Signed-off-by:
-
Chris Wilson authored
We want to use intel_engine_mask_t inside i915_request.h, which means extracting it from the general header file mess and placing it inside a types.h. A knock on effect is that the compiler wants to warn about type-contraction of ALL_ENGINES into intel_engine_maskt_t, so prepare for the worst. v2: Use intel_engine_mask_t consistently v3: Move I915_NUM_ENGINES to its natural home at the end of the enum Signed-off-by:
-
Chris Wilson authored
If the user passes in a pointer to a GGTT mmaping of the same buffer being written to, we can hit a deadlock in acquiring the shmemfs page (once as the write destination and then as the read source). [<0>] io_schedule+0xd/0x30 [<0>] __lock_page+0x105/0x1b0 [<0>] find_lock_entry+0x55/0x90 [<0>] shmem_getpage_gfp+0xbb/0x800 [<0>] shmem_read_mapping_page_gfp+0x2d/0x50 [<0>] shmem_get_pages+0x158/0x5d0 [i915] [<0>] ____i915_gem_object_get_pages+0x17/0x90 [i915] [<0>] __i915_gem_object_get_pages+0x57/0x70 [i915] [<0>] i915_gem_fault+0x1b4/0x5c0 [i915] [<0>] __do_fault+0x2d/0x80 [<0>] __handle_mm_fault+0xad4/0xfb0 [<0>] handle_mm_fault+0xe6/0x1f0 [<0>] __do_page_fault+0x18f/0x3f0 [<0>] page_fault+0x1b/0x20 [<0>] copy_user_enhanced_fast_string+0x7/0x10 [<0>] _copy_from_user+0x37/0x60 [<0>] shmem_pwrite+0xf0/0x160 [i915] [<0>] i915_gem_pwrite_ioctl+0x14e/0x520 [i915] [<0>] drm_ioctl_kernel+0x81/0xd0 [<0>] drm_ioctl+0x1a7/0x310 [<0>] do_vfs_ioctl+0x88/0x5d0 [<0>] ksys_ioctl+0x35/0x70 [<0>] __x64_sys_ioctl+0x11/0x20 [<0>] do_syscall_64+0x39/0xe0 [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 We can reduce (but not eliminate!) the chance of this happening by faulting the user_data before we take the page lock in pagecache_write_begin(). One way to eliminate the potential recursion here is by disabling pagefaults for the copy, and handling the fallback to use an alternative method -- so convert to use kmap_atomic (which should disable preemption and pagefaulting for the copy) and report ENODEV instead of EFAULT so that our caller tries again with a different copy mechanism -- we already check that the page should have been faultable so a false negative should be rare. Testcase: igt/gem_pwrite/self Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401133909.31203-1-chris@chris-wilson.co.uk
-
- 01 Apr, 2019 5 commits
-
-
Rodrigo Vivi authored
Let's reserve EHL stolen memory for graphics. ElkhartLake is a gen11 platform which is compatible with ICL changes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190315191938.22211-2-rodrigo.vivi@intel.com
-
Tvrtko Ursulin authored
Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
This will enable the following patch to consolidate most device ids into i915_pciids.h. While cross-referencing the ids listed in i915_drv.h, with the ones listed in i915_pciids.h, and also the comments in the latter, a bug for bug approach was used. This means two things: 1. Some ids are only present in i915_drv.h - obviously this means those parts would not have been probed at all so they were not added to i915_pciids.h 2. Some part type comments in i915_pciids.h were in disagreement with i915_drv.h. For instance parts labeled as ULT or ULX were not considered as such in i915_drv.h. The existing behaviour takes precedence here. Signed-off-by:
-
Tvrtko Ursulin authored
IS_IRONLAKE_M can use the already defined intel_device_info.is_mobile for this platform, so remove the instance of Ironlake's mobile device id from the header file and replace it with an IS_MOBILE check. v2: * Improved commit text. (Chris) v3: * Rebased for EHL. Signed-off-by:
-
Tvrtko Ursulin authored
This allows the IS_PINEVIEW_<G|M> macros to be removed and avoid duplication of device ids already defined in i915_pciids.h. !IS_MOBILE check can be used in place of existing IS_PINEVIEW_G call sites. Signed-off-by:
-
- 31 Mar, 2019 2 commits
-
-
Chris Wilson authored
When we return pages to the system, we release control over them and should defensively return them to the CPU write domain so that we catch any external writes on reacquiring them (e.g. to transparently swapout/swapin). While we did this defensive clflushing for ordinary shmem pages, it was forgotten for userptr. Fortunately, userptr objects are normally cache coherent and so oblivious to the forgotten domain tracking. References: a679f58d ("drm/i915: Flush pages on acquisition") References: 754a2544 ("drm/i915: Skip object locking around a no-op set-domain ioctl") Signed-off-by:
-
Chris Wilson authored
As we only set ctx->file_priv on registering the GEM context after construction, it is invalid to try and use it in the middle for setting various parameters. Indeed, we put the file_priv into struct create_ext so that we have the right file_private available without having to look at ctx->file_priv. However, it helps to use it! Reported-by:
Jordan Justen <jordan.l.justen@intel.com> Fixes: b9171541 ("drm/i915: Extend CONTEXT_CREATE to set parameters upon construction") Signed-off-by:
-
- 30 Mar, 2019 1 commit
-
-
Robert M. Fosha authored
Currently we only retry to load GuC firmware if the load fails due to timeout. On Gen9 GuC loading may fail for different reasons, not just hang/timeout. Direction from the GuC team is to retry for all cases of GuC load failure on Gen9, not just for timeout. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108593Signed-off-by:
Robert M. Fosha <robert.m.fosha@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
- 29 Mar, 2019 5 commits
-
-
Chris Wilson authored
If drm_modeset_lock() reports a deadlock it sets the ctx->contexted field and insists that the caller calls drm_modeset_backoff() or else it generates a WARN on cleanup. <4> [1601.870376] WARNING: CPU: 3 PID: 8445 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x35/0x40 <4> [1601.870395] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal i915 coretemp crct10dif_pclmul <6> [1601.870403] Console: switching <4> [1601.870403] snd_hda_intel <4> [1601.870406] to colour frame buffer device 320x90 <4> [1601.870406] crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel e1000e snd_hda_core cdc_ether ptp usbnet mii pps_core snd_pcm i2c_i801 mei_me mei prime_numbers <4> [1601.870422] CPU: 3 PID: 8445 Comm: cat Tainted: G U 5.0.0-rc7-CI-CI_DRM_5650+ #1 <4> [1601.870424] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2402.AD3.1810170014 10/17/2018 <4> [1601.870427] RIP: 0010:drm_modeset_drop_locks+0x35/0x40 <4> [1601.870430] Code: 29 48 8b 43 60 48 8d 6b 60 48 39 c5 74 19 48 8b 43 60 48 8d b8 70 ff ff ff e8 87 ff ff ff 48 8b 43 60 48 39 c5 75 e7 5b 5d c3 <0f> 0b eb d3 0f 1f 80 00 00 00 00 41 56 41 55 41 54 55 53 48 8b 6f <4> [1601.870432] RSP: 0018:ffffc90000d67ce8 EFLAGS: 00010282 <4> [1601.870435] RAX: 00000000ffffffdd RBX: ffffc90000d67d00 RCX: 5dbbe23d00000000 <4> [1601.870437] RDX: 0000000000000000 RSI: 0000000093e6194a RDI: ffffc90000d67d00 <4> [1601.870439] RBP: ffff88849e62e678 R08: 0000000003b7329a R09: 0000000000000001 <4> [1601.870441] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888492100410 <4> [1601.870442] R13: ffff88849ea50958 R14: ffff8884a67eb028 R15: ffff8884a67eb028 <4> [1601.870445] FS: 00007fa7a27745c0(0000) GS:ffff8884aff80000(0000) knlGS:0000000000000000 <4> [1601.870447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [1601.870449] CR2: 000055af07e66000 CR3: 00000004a8cc2006 CR4: 0000000000760ee0 <4> [1601.870451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [1601.870453] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4> [1601.870454] PKRU: 55555554 <4> [1601.870456] Call Trace: <4> [1601.870505] i915_dsc_fec_support_show+0x91/0x190 [i915] <4> [1601.870522] seq_read+0xdb/0x3c0 <4> [1601.870531] full_proxy_read+0x51/0x80 <4> [1601.870538] __vfs_read+0x31/0x190 <4> [1601.870546] ? __se_sys_newfstat+0x3c/0x60 <4> [1601.870552] vfs_read+0x9e/0x150 <4> [1601.870557] ksys_read+0x50/0xc0 <4> [1601.870564] do_syscall_64+0x55/0x190 <4> [1601.870569] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [1601.870572] RIP: 0033:0x7fa7a226d081 <4> [1601.870574] Code: fe ff ff 48 8d 3d 67 9c 0a 00 48 83 ec 08 e8 a6 4c 02 00 66 0f 1f 44 00 00 48 8d 05 81 08 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 <4> [1601.870576] RSP: 002b:00007ffcc05140c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 <4> [1601.870579] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fa7a226d081 <4> [1601.870581] RDX: 0000000000020000 RSI: 000055af07e63000 RDI: 0000000000000007 <4> [1601.870583] RBP: 0000000000020000 R08: 000000000000007b R09: 0000000000000000 <4> [1601.870585] R10: 000055af07e60010 R11: 0000000000000246 R12: 000055af07e63000 <4> [1601.870587] R13: 0000000000000007 R14: 000055af07e634bf R15: 0000000000020000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109745 Fixes: e845f099 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable") Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190329165152.29259-1-chris@chris-wilson.co.uk
-
Uma Shankar authored
EXT2 GC MAX registers are introduced from Gen10+ to program values from 3.0 to 7.0. Enabled the same, but currently limiting it to 1.0 as userspace ABI is limited at that currently. v2: Updated the 1.0 programming and aligned as per GLK, also added GLK along with GEN10+ check, as per Ville's feedback. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Uma Shankar authored
GC MAX register is used to program values from 1.0 to less than 3.0. A different register was used instead of the intended one. Fixed the same. Currently limiting it to 1.0 due to ABI limitations. v2: Updated the 1.0 programming and aligned as per GLK, based on Ville's feedback. Reported-by:
-
Daniele Ceraolo Spurio authored
Those functions are used on gen4 as well and gen4 does have a non-RCS engine, so remove the BUG_ON and flip back the logic to what it was before the ENGINE_READ/WRITE update v2: update the posting read as well (Chris, Ville). Fixes: baba6e57 ("drm/i915: take a reference to uncore in the engine and use it") Signed-off-by:
-
Daniele Ceraolo Spurio authored
edram is not part of uncore and there is no requirement for the detection to be done before we initialize the uncore functions. The first check on HAS_EDRAM is in the ggtt_init path, so move it to i915_driver_init_hw, where other dram-related detection happens. While at it, save the size in MB instead of the capabilities because the size is the only thing we look at outside of the init function. Signed-off-by:
-
- 28 Mar, 2019 13 commits
-
-
Ville Syrjälä authored
Don't load the linear degamma LUT on ICL. The hardware no longer has any silly linkages between the CSC enable and degamma LUT enable so the degamma LUT is only needed when it's actually enabled. Also add comments to explain the situation on GLK. v2: Drop useless parens around 1<<16 v3: Add missing const Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327155045.28446-11-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
We now bypass the legacy LUT when it's not needed, so no point in filling it up with a linear LUT. Signed-off-by:
-
Ville Syrjälä authored
With everything else moved out of the way only ilk+ remains using _intel_color_check(). Streamline the logic into ilk_color_check(). v2: Add some comments explaining we that we don't expose the full hardware capabilities currently (Matt) Signed-off-by: -
Ville Syrjälä authored
Provide a separate .color_check() for BDW+ where we currently provide the split gamma mode etc. Signed-off-by:
-
Ville Syrjälä authored
Unlike the earlier platforms GLK has dedicated degamma and gamma LUTs. And quite curiously the degamma LUT is actually controlled via the PLANE_COLOR_CTL CSC enable bit. Hence we must compute gamma_enable and csc_enable differently to pre-GLK platforms. Signed-off-by:
-
Ville Syrjälä authored
ICL is rather easy when it comes to .color_check() as it finally provides us with a full color pipeline with individual knobs for each stage. We'll also start bypassing each LUT individually when it is not needed. Signed-off-by:
-
Ville Syrjälä authored
Since CHV has the CGM unit we require a custom implementation of .color_check(). This fixes the computation of gamma_enable as previously we left it enabled even when were using the CGM gamma instead. Now we turn off the legacy LUT unless it's actually required. v2: Add some comment explaining the color pipeline (Matt) Signed-off-by:
-
Ville Syrjälä authored
Apart from CHV the other gmch platforms don't currently require much work in .color_check(). So let's start by extracting i9xx_color_check(). Signed-off-by:
-
Ville Syrjälä authored
The current intel_color_check() is a mess, and worse yet it is in fact incorrect for several platforms. The hardware has evolved quite a bit over the years, so let's just go for a clean split between the platforms by turning this into a vfunc. The actual work to split it up will follow. v2: Assign the vfuncs in the order they appear in the struct (Matt) Signed-off-by: -
Ville Syrjälä authored
In prepartion for per-platform color_check() functions extract the common code into a separate function. v2: Improve the C8 comment (Matt) Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Signed-off-by: -
Joonas Lahtinen authored
Signed-off-by:
-
- 27 Mar, 2019 2 commits
-
-
Maarten Lankhorst authored
90/270 rotation is not supported for Y21x and the 12/16 bits XVYU formats, reject support for them. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322135954.20434-3-maarten.lankhorst@linux.intel.comReviewed-by:
-
Maarten Lankhorst authored
This was missing in the original addition of those formats, but in PLANE_SIZE description it's mentioned that 8 cpp formats are not valid with Yf tiling. Reject this case properly. Also reject Y21x Yf tiling support this is also not supported. Changes since v1: - Reject Y21x as well. Signed-off-by:
-
