- 12 Sep, 2023 1 commit
-
-
Mark Brown authored
Merge series from Konrad Dybcio <konrad.dybcio@linaro.org>: Like most Qualcomm SoCs, SM6115 has a TX Macro. Only some minor changes were required.
-
- 11 Sep, 2023 39 commits
-
-
Mark Brown authored
For some reason the JH7110 PWM DAC driver made it through build testing in spite of not being updated for the move of probe() to the ops struct. Make the required update. Signed-off-by:Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add match data improvements for wm8580 driver. This patch series is only compile tested.
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: The Maxim devices are pretty straight-forward to convert over to use GPIO descriptors, so let's do it.
-
Mark Brown authored
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add match data improvements for tlv320aic32x4 driver. This patch series is only compile tested.
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: The Maxim devices are pretty straight-forward to convert over to use GPIO descriptors, so let's do it.
-
Mark Brown authored
Merge series from Trevor Wu <trevor.wu@mediatek.com>: This series introduces dynamic pinctrl and adds support for the SOF on the mt8188-mt6359 machine driver.
-
Mark Brown authored
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add match data improvements for ak4642 driver. This patch series is only compile tested.
-
Mark Brown authored
Merge series from Marian Postevca <posteuca@mutex.one>: This series adds support for a line of HUAWEI laptops with AMD CPUs that connect using the ACP3x module to a ES8336 CODEC. The CODEC driver must be extended to support the S32 LE format and the MCLK div by 2 option. MCLK div by 2 is needed for one specific SKU, which uses a 48Mhz MCLK, which seems to be too high of a frequency for the CODEC and must be divided by 2. The acp legacy driver must also be extended by using callbacks so that the more complicated handling of this specific CODEC can be moved outside the more generic ACP code.
-
Mark Brown authored
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>: This patch series contains several fixes and improvements to drivers based on the CS35l41 audio codec. It has been verified on Valve's Steam Deck, except the HDA related patches.
-
Mark Brown authored
Merge series from Hal Feng <hal.feng@starfivetech.com>: This patchset adds PWM-DAC audio support for the StarFive JH7110 SoC. The PWM-DAC module does not require a hardware codec, but a dummy codec is needed for the driver. The dummy spdif codec driver, which is already upstream, is compatible with the one which JH7110 PWM-DAC needed. So we use it as the dummy codec driver for the JH7110 PWM-DAC module.
-
Cristian Ciocaltea authored
Replace the remaining dev_err() calls in probe() with dev_err_probe(), to improve consistency. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230907171010.1447274-12-cristian.ciocaltea@collabora.comSigned-off-by:
-
Cristian Ciocaltea authored
According to the documentation, drivers are responsible for undoing at removal time all runtime PM changes done during probing. Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which are necessary for undoing pm_runtime_use_autosuspend(). Fixes: 1873ebd3 ("ALSA: hda: cs35l41: Support Hibernation during Suspend") Signed-off-by:
-
Cristian Ciocaltea authored
If component_add() fails, probe() returns without calling pm_runtime_put(), which leaves the runtime PM usage counter incremented. Fix the issue by jumping to err_pm label and drop the now unnecessary pm_runtime_disable() call. Fixes: 7b2f3eb4 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems") Signed-off-by:
-
Cristian Ciocaltea authored
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to conditionally export the runtime/system PM functions. Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS() helpers with their modern alternatives and get rid of the now unnecessary '__maybe_unused' annotations on all PM functions. Additionally, use the pm_ptr() macro to fix the following errors when building with CONFIG_PM disabled: ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-spi.ko] undefined! ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-i2c.ko] undefined! Signed-off-by:Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
-
Cristian Ciocaltea authored
Use dev_err_probe() helper where possible, to simplify error handling during probe. Signed-off-by:
-
Cristian Ciocaltea authored
According to the documentation, drivers are responsible for undoing at removal time all runtime PM changes done during probing. Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which are necessary for undoing pm_runtime_use_autosuspend(). Note this would have been handled implicitly by devm_pm_runtime_enable(), but there is a need to continue using pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime PM is disabled as soon as the remove() callback is entered. Fixes: f517ba49 ("ASoC: cs35l41: Add support for hibernate memory retention mode") Signed-off-by:
-
Cristian Ciocaltea authored
The interrupt handler invokes pm_runtime_get_sync() without checking the returned error code. Add a proper verification and switch to pm_runtime_resume_and_get(), to avoid the need to call pm_runtime_put_noidle() for decrementing the PM usage counter before returning from the error condition. Fixes: f517ba49 ("ASoC: cs35l41: Add support for hibernate memory retention mode") Signed-off-by:
-
Cristian Ciocaltea authored
Enabling the active/passive shared boosts requires setting SYNC_EN, but *not* before receiving the PLL Lock signal. Due to improper error handling, it was not obvious that waiting for the completion operation times out and, consequently, the shared boost is never activated. Further investigations revealed the signal is triggered while snd_pcm_start() is executed, right after receiving the SNDRV_PCM_TRIGGER_START command, which happens long after the SND_SOC_DAPM_PRE_PMU event handler is invoked as part of snd_pcm_prepare(). That is where cs35l41_global_enable() is called from. Increasing the wait duration doesn't help, as it only causes an unnecessary delay in the invocation of snd_pcm_start(). Moving the wait and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START callback is not a solution either, since they would be executed in an IRQ-off atomic context. Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right after receiving the PLL Lock interrupt. Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of the original mdsync_up_seq, which would have toggled GLOBAL_EN with unwanted consequences on PLL locking behavior. Fixes: f5030564 ("ALSA: cs35l41: Add shared boost feature") Signed-off-by:
David Rhodes <david.rhodes@cirrus.com> Reviewed-by:
-
Cristian Ciocaltea authored
Technically, an interrupt handler can be called before probe() finishes its execution, hence ensure the pll_lock completion object is always initialized before being accessed in cs35l41_irq(). Fixes: f5030564 ("ALSA: cs35l41: Add shared boost feature") Signed-off-by:
-
Cristian Ciocaltea authored
The return code of regmap_multi_reg_write() call related to "MDSYNC up" sequence is shadowed by the subsequent regmap_read_poll_timeout() invocation, which will hit a timeout in case the write operation above fails. Make sure cs35l41_global_enable() returns the correct error code instead of -ETIMEDOUT. Additionally, to be able to distinguish between the timeouts of wait_for_completion_timeout() and regmap_read_poll_timeout(), print an error message for the former and return immediately. This also avoids having to wait unnecessarily for the second time. Fixes: f8264c75 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay") Signed-off-by:
-
Cristian Ciocaltea authored
The return code of regmap_multi_reg_write() call related to "MDSYNC down" sequence is shadowed by the subsequent wait_for_completion_timeout() invocation, which is expected to time timeout in case the write operation failed. Let cs35l41_global_enable() return the correct error code instead of -ETIMEDOUT. Fixes: f5030564 ("ALSA: cs35l41: Add shared boost feature") Signed-off-by:
-
Linus Walleij authored
This driver is already using solely GPIO descriptors and do not need to include the legacy headers <linux/gpio.h> or <linux/of_gpio.h>. Drop them. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-7-b9d793fb768e@linaro.orgSigned-off-by:
-
Linus Walleij authored
This driver is already using solely GPIO descriptors and do not need to include the legacy headers <linux/gpio.h> or <linux/of_gpio.h>. Drop them. Signed-off-by:
-
Linus Walleij authored
This driver is already using solely GPIO descriptors and do not need to include the legacy header <linux/gpio.h>. Drop it. Signed-off-by:
-
Linus Walleij authored
The MAX98388 driver is using the modern GPIO descriptor API but uses legacy includes. Include the proper <linux/consumer.h> header instead. Signed-off-by:
-
Linus Walleij authored
Instead of relying on legacy interfaces, convert the driver to use GPIO descriptors. This is a straight-forward conversion, we support also sdw devices providing GPIO descriptor tables if they so desire. Signed-off-by:
-
Linus Walleij authored
This driver is already using solely GPIO descriptors and do not need to include the legacy header <linux/gpio.h>. Drop it. Signed-off-by:
-
Linus Walleij authored
The MAX9768 is pretty straight forward to convert to GPIO descriptors. To name the GPIO properties, I looke at the bindings in maxim,max9759.yaml which names these GPIO "mute" and "shutdown" respectively. No board files using platform data exist in the kernel, new users can use GPIO descriptor tables if desired. Signed-off-by:
-
Hal Feng authored
Add PWM-DAC driver support for the StarFive JH7110 SoC. Reviewed-by:
Walker Chen <walker.chen@starfivetech.com> Signed-off-by:
Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230814080618.10036-3-hal.feng@starfivetech.comSigned-off-by:
-
Hal Feng authored
Add bindings for the PWM-DAC controller on the JH7110 RISC-V SoC by StarFive Ltd. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Biju Das authored
Simplify probe() by replacing of_match_device->i2c_get_match_data(). Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230827091525.39263-1-biju.das.jz@bp.renesas.comSigned-off-by:
-
Vlad Karpovich authored
The "AMP Enable Switch" is useful in systems with multiple amplifiers connected to the same audio bus but not all of them are needed for all use cases. Signed-off-by:
Vlad Karpovich <vkarpovi@opensource.cirrus.com> Acked-by:
Ricardo Rivera-Matos <rriveram@opensource.cirrus.com> Acked-by:
-
Vlad Karpovich authored
Link VMON, IMON, TEMPMON, VDD_BSTMON and VDD_BATTMON to DSP1. The CSPL firmware uses them for the speaker calibration and monitoring. Signed-off-by:
-
Vlad Karpovich authored
Adds "Analog PCM Volume" control with supported values 0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB. The amplifier can operate either in Speaker Mode or Receiver Mode as configured by the user. Speaker Mode has four gain options to support maximum amplifier output amplitude for loud speaker application. Receiver Mode has further optimized noise performance while maintaining sufficient output to support phone receiver application. While configured in Receiver Mode, the analog PCM Volume control is disabled and the analog gain is fixed to 1dB. Signed-off-by:
-
Ricardo Rivera-Matos authored
Checks the index computed by the virq offset before printing the error condition in cs35l45_spk_safe_err() handler. Signed-off-by:
-
Biju Das authored
Simplify probe() by replacing of_match_device->i2c_get_match_data() and extend matching support for ID table. Also replace dev_err()->dev_err_probe() to simplify the code. Signed-off-by:
-
Biju Das authored
Simplify probe() by replacing of_match_device->i2c_get_match_data() and extend matching support for ID table. While at it, remove comma in the terminator entry and simplify probe() by replacing dev_err->dev_err_probe(). Signed-off-by:
-
Jerome Brunet authored
The TDM HW on the axg SoC families and derivatives actually supports 384kHz sampling rate. Update the fifo and tdm interface constraints accordingly. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230907090910.13546-1-jbrunet@baylibre.comSigned-off-by:
-
Andy Shevchenko authored
Replace custom implementation of the macros from args.h. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20230904111524.1740930-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
