Pull microblaze update from Michal Simek:
 "Microblaze changes.

  After my discussion with Arnd I have also added there asm-generic io
  patch which is Acked by him and Geert."

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  asm-generic: io: Fix ioread16/32be and iowrite16/32be
  microblaze: Do not use module.h in files which are not modules
  microblaze: Fix coding style issues
  microblaze: Add missing return from debugfs_tlb
  microblaze: Makefile clean
  microblaze: Add .gitignore entries for auto-generated files
  microblaze: Fix strncpy_from_user macro

Pull OpenRISC updates from Jonas Bonn:
 "An equal number of bug fixes and trivial cleanups; no new features.

   - Two patches to fix errors thrown by the updated toolchain.

   - Three other bug fixes.

   - Four trivial cleanups."

* 'for-upstream' of git://openrisc.net/jonas/linux:
  openrisc: add missing header inclusion
  openrisc: really pass correct arg to schedule_tail
  Add bitops include needed for ext2 filesystem
  openrisc: update DTLB-miss handler last
  openrisc: fix up vmalloc page table loading
  openrisc idle: delete pm_idle
  openrisc: remove CONFIG_SYMBOL_PREFIX
  openrisc: avoid using function parameter regs in reset vector
  openrisc: remove unused current_regs

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge
  Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit"
  x86/mm/numa: Don't check if node is NUMA_NO_NODE
  x86, efi: Make "noefi" really disable EFI runtime serivces
  x86/apic: Fix parsing of the 'lapic' cmdline option

Pull timer fixes from Ingo Molnar.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource : Nomadik-mtu : fix missing irq initialization
  posix-timer: Don't call idr_find() with out-of-range ID

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cputime: Use local_clock() for full dynticks cputime accounting
  cputime: Constify timeval_to_cputime(timeval) argument
  sched: Move RR_TIMESLICE from sysctl.h to rt.h
  sched: Fix /proc/sched_debug failure on very very large systems
  sched: Fix /proc/sched_stat failure on very very large systems
  sched/core: Remove the obsolete and unused nr_uninterruptible() function

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Add Intel IvyBridge event scheduling constraints
  ftrace: Call ftrace cleanup module notifier after all other notifiers
  tracing/syscalls: Allow archs to ignore tracing compat syscalls

Pull ext4 updates from Theodore Ts'o:
 "The one new feature added in this patch series is the ability to use
  the "punch hole" functionality for inodes that are not using extent
  maps.

  In the bug fix category, we fixed some races in the AIO and fstrim
  code, and some potential NULL pointer dereferences and memory leaks in
  error handling code paths.

  In the optimization category, we fixed a performance regression in the
  jbd2 layer introduced by commit d9b01934 ("jbd: fix fsync() tid
  wraparound bug", introduced in v3.0) which shows up in the AIM7
  benchmark.  We also further optimized jbd2 by minimize the amount of
  time that transaction handles are held active.

  This patch series also features some additional enhancement of the
  extent status tree, which is now used to cache extent information in a
  more efficient/compact form than what we use on-disk."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (65 commits)
  ext4: fix free clusters calculation in bigalloc filesystem
  ext4: no need to remove extent if len is 0 in ext4_es_remove_extent()
  ext4: fix xattr block allocation/release with bigalloc
  ext4: reclaim extents from extent status tree
  ext4: adjust some functions for reclaiming extents from extent status tree
  ext4: remove single extent cache
  ext4: lookup block mapping in extent status tree
  ext4: track all extent status in extent status tree
  ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
  ext4: rename and improbe ext4_es_find_extent()
  ext4: add physical block and status member into extent status tree
  ext4: refine extent status tree
  ext4: use ERR_PTR() abstraction for ext4_append()
  ext4: refactor code to read directory blocks into ext4_read_dirblock()
  ext4: add debugging context for warning in ext4_da_update_reserve_space()
  ext4: use KERN_WARNING for warning messages
  jbd2: use module parameters instead of debugfs for jbd_debug
  ext4: use module parameters instead of debugfs for mballoc_debug
  ext4: start handle at the last possible moment when creating inodes
  ext4: fix the number of credits needed for acl ops with inline data
  ...

Pull ext2, ext3, udf updates from Jan Kara:
 "Several UDF fixes, a support for UDF extent cache, and couple of ext2
  and ext3 cleanups and minor fixes"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  Ext2: remove the static function release_blocks to optimize the kernel
  Ext2: mark inode dirty after the function dquot_free_block_nodirty is called
  Ext2: remove the overhead check about sb in the function ext2_new_blocks
  udf: Remove unused s_extLength from udf_bitmap
  udf: Make s_block_bitmap standard array
  udf: Fix bitmap overflow on large filesystems with small block size
  udf: add extent cache support in case of file reading
  udf: Write LVID to disk after opening / closing
  Ext3: return ENOMEM rather than EIO if sb_getblk fails
  Ext2: return ENOMEM rather than EIO if sb_getblk fails
  Ext3: use unlikely to improve the efficiency of the kernel
  Ext2: use unlikely to improve the efficiency of the kernel
  Ext3: add necessary check in case IO error happens
  Ext2: free memory allocated and forget buffer head when io error happens
  ext3: Fix memory leak when quota options are specified multiple times
  ext3, ext4, ocfs2: remove unused macro NAMEI_RA_INDEX

Pull ubifs updates from Artem Bityutskiy:
 "It's been quite silent and we have only a couple of bug-fixes for the
  orphans handling code plus one cosmetic change."

* tag 'upstream-3.9-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: fix double free of ubifs_orphan objects
  UBIFS: fix use of freed ubifs_orphan objects
  UBIFS: rename random32() to prandom_u32()

Pull f2fs update from Jaegeuk Kim:
 "[Major bug fixes]
   o Store device file information correctly
   o Fix -EIO handling with respect to power-off-recovery
   o Allocate blocks with global locks
   o Fix wrong calculation of the SSR cost

  [Cleanups]
   o Get rid of fake on-stack dentries

  [Enhancement]
   o Support (un)freeze_fs
   o Enhance the f2fs_gc flow
   o Support 32-bit binary execution on 64-bit kernel"

* tag 'f2fs-for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: avoid build warning
  f2fs: add compat_ioctl to provide backward compatability
  f2fs: fix calculation of max. gc cost in the SSR case
  f2fs: clarify and enhance the f2fs_gc flow
  f2fs: optimize the return condition for has_not_enough_free_secs
  f2fs: make an accessor to get sections for particular block type
  f2fs: mark gc_thread as NULL when thread creation is failed
  f2fs: name gc task as per the block device
  f2fs: remove unnecessary gc option check and balance_fs
  f2fs: remove repeated F2FS_SET_SB_DIRT call
  f2fs: when check superblock failed, try to check another superblock
  f2fs: use F2FS_BLKSIZE to judge bloksize and page_cache_size
  f2fs: add device name in debugfs
  f2fs: stop repeated checking if cp is needed
  f2fs: avoid balanc_fs during evict_inode
  f2fs: remove the use of page_cache_release
  f2fs: fix typo mistake for data_version description
  f2fs: reorganize code for ra_node_page
  f2fs: avoid redundant call to has_not_enough_free_secs in f2fs_gc
  f2fs: add un/freeze_fs into super_operations
  ...

Pull virtio updates from Rusty Russell:
 "All trivial, thanks to the stuff which didn't quite make it time"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Initialize guest_connected=true for rproc_serial
  virtio: use module_virtio_driver.
  virtio: Add module driver macro for virtio drivers.
  virtio_console: Use virtio device index to generate port name
  virtio: make pci_device_id const
  virtio: make config_ops const
  virtio-mmio: fix wrong comment about register offset
  virtio_console: Let unconnected rproc device receive data.

Pull VFIO updates from Alex Williamson:
 - Fixes PCIe v1 extended capability support

 - Cleans up read/write access functions

 - Fix Removal test to properly wait until devices are unused

 - Enable pcieport driver usage for non-accessible devices w/in groups

 - Extensions for PCI VGA support

* tag 'vfio-v3.9-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: remove depends on CONFIG_EXPERIMENTAL
  vfio-pci: Add support for VGA region access
  vfio-pci: Manage user power state transitions
  vfio: whitelist pcieport
  vfio: Protect vfio_dev_present against device_del
  vfio-pci: Cleanup BAR access
  vfio-pci: Cleanup read/write functions
  vfio-pci: Enable PCIe extended capabilities on v1

Pull networking fixes from David Miller:

 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li
    Wei.

 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet.

 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from
    Alexander Duyck.

 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix
    from Eric Dumazet.

 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the
    amount of TCP option space was not taken into account properly in
    this code path.  Fix from yuchung Cheng.

 6) MLX4 driver allocates device queues with the wrong size, from Kleber
    Sacilotto.

 7) sock_diag can access past the end of the sock_diag_handlers[] array,
    from Mathias Krause.

 8) vlan_set_encap_proto() makes incorrect assumptions about where
    skb->data points, rework the logic so that it works regardless of
    where skb->data happens to be.  From Jesse Gross.

 9) Fix gianfar build failure with NET_POLL enabled, from Paul
    Gortmaker.

10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from
   Pravin B Shelar.

11) bgmac driver does:

        int i;

        for (i = 0; ...; ...) {
                ...
                for (i = 0; ...; ...) {

    effectively corrupting the outer loop index, use a seperate
    variable for the inner loops.  From Rafał Miłecki.

12) Fix suspend bugs in smsc95xx driver, from Ming Lei.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND
  usbnet: smsc95xx: fix broken runtime suspend
  usbnet: smsc95xx: fix suspend failure
  bgmac: fix indexing of 2nd level loops
  b43: Fix lockdep splat on module unload
  Revert "ip_gre: propogate target device GSO capability to the tunnel device"
  IP_GRE: Fix GRE_CSUM case.
  VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.
  IP_GRE: Fix IP-Identification.
  net/pasemi: Fix missing coding style
  vmxnet3: fix ethtool ring buffer size setting
  vmxnet3: make local function static
  bnx2x: remove dead code and make local funcs static
  gianfar: fix compile fail for NET_POLL=y due to struct packing
  vlan: adjust vlan_set_encap_proto() for its callers
  sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg
  sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
  vxlan: remove depends on CONFIG_EXPERIMENTAL
  mlx4_en: fix allocation of CPU affinity reverse-map
  mlx4_en: fix allocation of device tx_cq
  ...

Pull scsi target updates from Nicholas Bellinger:
 "The highlights in this series include:

   - Improve sg_table lookup scalability in RAMDISK_MCP (martin)

   - Add device attribute to expose config name for INQUIRY model (tregaron)

   - Convert tcm_vhost to use lock-less list for cmd completion (asias)

   - Add tcm_vhost support for multiple target's per endpoint (asias)

   - Add tcm_vhost support for multiple queues per vhost (asias)

   - Add missing mapped_lun bounds checking during make_mappedlun setup
     in generic fabric configfs code (jan engelhardt + nab)

   - Enforce individual iscsi-target network portal export once per
     TargetName endpoint (grover + nab)

   - Add WRITE_SAME w/ UNMAP=0 emulation to FILEIO backend (nab)

  Things have been mostly quiet this round, with majority of the work
  being done on the iser-target WIP driver + associated iscsi-target
  refactoring patches currently in flight for v3.10 code.

  At this point there is one patch series left outstanding from Asias to
  add support for UNMAP + WRITE_SAME w/ UNMAP=1 to FILEIO awaiting
  feedback from hch & Co, that will likely be included in a post
  v3.9-rc1 PULL request if there are no objections.

  Also, there is a regression bug recently reported off-list that seems
  to be effecting v3.5 and v3.6 kernels with MSFT iSCSI initiators that
  is still being tracked down.  No word if this effects >= v3.7 just
  yet, but if so there will likely another PULL request coming your
  way.."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors
  target/file: Add WRITE_SAME w/ UNMAP=0 emulation support
  iscsi-target: Enforce individual network portal export once per TargetName
  iscsi-target: Refactor iscsit_get_np sockaddr matching into iscsit_check_np_match
  target: Add missing mapped_lun bounds checking during make_mappedlun setup
  target: Fix lookup of dynamic NodeACLs during cached demo-mode operation
  target: Fix parameter list length checking in MODE SELECT
  target: Fix error checking for UNMAP commands
  target: Fix sense data for out-of-bounds IO operations
  target_core_rd: break out unterminated loop during copy
  tcm_vhost: Multi-queue support
  tcm_vhost: Multi-target support
  target: Add device attribute to expose config_item_name for INQUIRY model
  target: don't truncate the fail intr address
  target: don't always say "ipv6" as address type
  target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
  iscsi-target: make some temporary buffers larger
  tcm_vhost: Optimize gup in vhost_scsi_map_to_sgl
  tcm_vhost: Use iov_num_pages to calculate sgl_count
  tcm_vhost: Introduce iov_num_pages
  ...

Pull infiniband update from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.9:

   - SRP error handling fixes from Bart Van Assche

   - Implementation of memory windows for mlx4 from Shani Michaeli

   - Lots of cxgb4 HW driver fixes from Vipul Pandya

   - Make iSER work for virtual functions, other fixes from Or Gerlitz

   - Fix for bug in qib HW driver from Mike Marciniszyn

   - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman

   - Various cleanups and warning fixes from Julia Lawall, Paul Bolle,
     Wei Yongjun"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits)
  IB/mlx4: Advertise MW support
  IB/mlx4: Support memory window binding
  mlx4: Implement memory windows allocation and deallocation
  mlx4_core: Enable memory windows in {INIT, QUERY}_HCA
  mlx4_core: Disable memory windows for virtual functions
  IPoIB: Free ipoib neigh on path record failure so path rec queries are retried
  IB/srp: Fail I/O requests if the transport is offline
  IB/srp: Avoid endless SCSI error handling loop
  IB/srp: Avoid sending a task management function needlessly
  IB/srp: Track connection state properly
  IB/mlx4: Remove redundant NULL check before kfree
  IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable
  IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool
  IB/iser: Enable iser when FMRs are not supported
  IB/iser: Avoid error prints on EAGAIN registration failures
  IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML
  IB/uverbs: Implement memory windows support in uverbs
  IB/core: Add "type 2" memory windows support
  mlx4_core: Propagate MR deregistration failures to caller
  mlx4_core: Rename MPT-related functions to have mpt_ prefix
  ...

Pull IOMMU Updates from Joerg Roedel:
 "Besides some fixes and cleanups in the code there are three more
  important changes to point out this time:

	* New IOMMU driver for the ARM SHMOBILE platform
	* An IOMMU-API extension for non-paging IOMMUs (required for
	  upcoming PAMU driver)
	* Rework of the way the Tegra IOMMU driver accesses its
	  registetrs - register windows are easier to extend now.

  There are also a few changes to non-iommu code, but that is acked by
  the respective maintainers."

* tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits)
  iommu/tegra: assume CONFIG_OF in SMMU driver
  iommu/tegra: assume CONFIG_OF in gart driver
  iommu/amd: Remove redundant NULL check before dma_ops_domain_free().
  iommu/amd: Initialize device table after dma_ops
  iommu/vt-d: Zero out allocated memory in dmar_enable_qi
  iommu/tegra: smmu: Fix incorrect mask for regbase
  iommu/exynos: Make exynos_sysmmu_disable static
  ARM: mach-shmobile: r8a7740: Add IPMMU device
  ARM: mach-shmobile: sh73a0: Add IPMMU device
  ARM: mach-shmobile: sh7372: Add IPMMU device
  iommu/shmobile: Add iommu driver for Renesas IPMMU modules
  iommu: Add DOMAIN_ATTR_WINDOWS domain attribute
  iommu: Add domain window handling functions
  iommu: Implement DOMAIN_ATTR_PAGING attribute
  iommu: Check for valid pgsize_bitmap in iommu_map/unmap
  iommu: Make sure DOMAIN_ATTR_MAX is really the maximum
  iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA
  iommu/tegra: smmu: Use helper function to check for valid register offset
  iommu/tegra: smmu: Support variable MMIO ranges/blocks
  iommu/tegra: Add missing spinlock initialization
  ...

Pull DMA-mapping updates from Marek Szyprowski:
 "This time all patches are related only to ARM DMA-mapping subsystem.
  The main extension provided by this pull request is highmem support.
  Besides that it contains a bunch of small bugfixes and cleanups."

* 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation
  ARM: dma-mapping: Add maximum alignment order for dma iommu buffers
  ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices
  ARM: dma-mapping: add support for CMA regions placed in highmem zone
  arm: dma mapping: export arm iommu functions
  ARM: dma-mapping: Add arm_iommu_detach_device()
  ARM: dma-mapping: Add macro to_dma_iommu_mapping()
  ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()
  ARM: iommu: Include linux/kref.h in asm/dma-iommu.h

Pull i2c updates from Wolfram Sang:
 "Highlights:

   - new drivers for Intel ismt & Broadcom bcm2835
   - a number of drivers got support for more variants and mostly got
     cleaned up on the way (sis630, i801, at91, tegra, designware)
   - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure
   - removed the i2c_smbus_process_call from the core since there are no
     users
   - mxs can now switch between PIO and DMA depending on the message
     size and the bus speed can now be arbitrary

  In addition, there is the usual bunch of fixes, cleanups, devm_*
  conversions, etc"

Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits)
  i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls
  i2c: pxa: remove incorrect __exit annotations
  i2c: ocores: Fix pointer to integer cast warning
  i2c: tegra: remove warning dump if timeout happen in transfer
  i2c: fix i2c-ismt.c printk format warning
  i2c: i801: Add Device IDs for Intel Wellsburg PCH
  i2c: add bcm2835 driver
  i2c: ismt: Add Seth and Myself as maintainers
  i2c: sis630: checkpatch cleanup
  i2c: sis630: display unsigned hex
  i2c: sis630: use hex to constants for SMBus commands
  i2c: sis630: fix behavior after collision
  i2c: sis630: clear sticky bits
  i2c: sis630: Add SIS964 support
  i2c: isch: Add module parameter for backbone clock rate if divider is unset
  i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  i2c: sh_mobile: don't send a stop condition by default inside transfers
  i2c: sh_mobile: eliminate an open-coded "goto" loop
  i2c: sh_mobile: fix timeout error handling
  ...

Pull GPIO changes from Grant Likely:
 "This branch contains the usual set of individual driver improvements
  and bug fixes, as well as updates to the core code.  The more notable
  changes include:

   - Internally add new API for referencing GPIOs by gpio_desc instead
     of number.  Eventually this will become a public API

   - ACPI GPIO binding support"

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
  arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
  gpio: em: Use irq_domain_add_simple() to fix runtime error
  gpio: using common order: let 'static const' instead of 'const static'
  gpio/vt8500: memory cleanup missing
  gpiolib: Fix locking on gpio debugfs files
  gpiolib: let gpio_chip reference its descriptors
  gpiolib: use descriptors internally
  gpiolib: use gpio_chips list in gpiochip_find_base
  gpiolib: use gpio_chips list in sysfs ops
  gpiolib: use gpio_chips list in gpiochip_find
  gpiolib: use gpio_chips list in gpiolib_sysfs_init
  gpiolib: link all gpio_chips using a list
  gpio/langwell: cleanup driver
  gpio/langwell: Add Cloverview ids to pci device table
  gpio/lynxpoint: add chipset gpio driver.
  gpiolib: add missing braces in gpio_direction_show
  gpiolib-acpi: Fix error checks in interrupt requesting
  gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
  gpiolib: remove gpiochip_reserve()
  arm: pxa: tosa: do not use gpiochip_reserve()
  ...

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
  leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
  leds: 88pm860x: Add missing of_node_put()
  leds: tca6507: Use of_get_child_count()
  leds: leds-pwm: make it depend on PWM and not HAVE_PWM
  Documentation: leds: update LP55xx family devices
  leds-lp55xx: fix problem on removing LED attributes
  leds-lp5521/5523: add author and copyright description
  leds-lp5521/5523: use new lp55xx common header
  leds-lp55xx: clean up headers
  leds-lp55xx: clean up definitions
  leds-lp55xx: clean up unused data and functions
  leds-lp55xx: clean up _remove()
  leds-lp55xx: add new function for removing device attribtues
  leds-lp55xx: code refactoring on selftest function
  leds-lp55xx: use common device attribute driver function
  leds-lp55xx: support device specific attributes
  leds-lp5523: use generic firmware interface
  leds-lp5521: use generic firmware interface
  leds-lp55xx: support firmware interface
  leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
  ...

Pull slave-dmaengine updates from Vinod Koul:
 "This is fairly big pull by my standards as I had missed last merge
  window.  So we have the support for device tree for slave-dmaengine,
  large updates to dw_dmac driver from Andy for reusing on different
  architectures.  Along with this we have fixes on bunch of the drivers"

Fix up trivial conflicts, usually due to #include line movement next to
each other.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits)
  Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
  ARM: dts: pl330: Add #dma-cells for generic dma binding support
  DMA: PL330: Register the DMA controller with the generic DMA helpers
  DMA: PL330: Add xlate function
  DMA: PL330: Add new pl330 filter for DT case.
  dma: tegra20-apb-dma: remove unnecessary assignment
  edma: do not waste memory for dma_mask
  dma: coh901318: set residue only if dma is in progress
  dma: coh901318: avoid unbalanced locking
  dmaengine.h: remove redundant else keyword
  dma: of-dma: protect list write operation by spin_lock
  dmaengine: ste_dma40: do not remove descriptors for cyclic transfers
  dma: of-dma.c: fix memory leakage
  dw_dmac: apply default dma_mask if needed
  dmaengine: ioat - fix spare sparse complain
  dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c
  ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING
  dw_dmac: add support for Lynxpoint DMA controllers
  dw_dmac: return proper residue value
  dw_dmac: fill individual length of descriptor
  ...

Prevents build issue with updated toolchain
Reported-by: Jack Thomasson <jkt@moonlitsw.com>
Tested-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>

Pull ACPI and power management fixes from Rafael Wysocki:

 - Fixes for blackfin and microblaze build problems introduced by the
   removal of global pm_idle.  From Lars-Peter Clausen.

 - OPP core build fix from Shawn Guo.

 - Error condition check fix for the new imx6q-cpufreq driver from Wei
   Yongjun.

 - Fix for an AER driver crash related to the lack of APEI
   initialization for acpi=off.  From Rafael J Wysocki.

 - Fix for a USB breakage on Thinkpad T430 related to ACPI power
   resources and PCI wakeup from Rafael J.  Wysocki.

* tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Take unusual configurations of power resources into account
  imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe()
  PM / OPP: fix condition for empty of_init_opp_table()
  ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off
  microblaze idle: Fix compile error
  blackfin idle: Fix compile error

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...

Pull drm merge from Dave Airlie:
 "Highlights:

   - TI LCD controller KMS driver

   - TI OMAP KMS driver merged from staging

   - drop gma500 stub driver

   - the fbcon locking fixes

   - the vgacon dirty like zebra fix.

   - open firmware videomode and hdmi common code helpers

   - major locking rework for kms object handling - pageflip/cursor
     won't block on polling anymore!

   - fbcon helper and prime helper cleanups

   - i915: all over the map, haswell power well enhancements, valleyview
     macro horrors cleaned up, killing lots of legacy GTT code,

   - radeon: CS ioctl unification, deprecated UMS support, gpu reset
     rework, VM fixes

   - nouveau: reworked thermal code, external dp/tmds encoder support
     (anx9805), fences sleep instead of polling,

   - exynos: all over the driver fixes."

Lovely conflict in radeon/evergreen_cs.c between commit de0babd6
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
  drm/tilcdc: only build on arm
  drm/i915: Revert hdmi HDP pin checks
  drm/tegra: Add list of framebuffers to debugfs
  drm/tegra: Fix color expansion
  drm/tegra: Split DC_CMD_STATE_CONTROL register write
  drm/tegra: Implement page-flipping support
  drm/tegra: Implement VBLANK support
  drm/tegra: Implement .mode_set_base()
  drm/tegra: Add plane support
  drm/tegra: Remove bogus tegra_framebuffer structure
  drm: Add consistency check for page-flipping
  drm/radeon: Use generic HDMI infoframe helpers
  drm/tegra: Use generic HDMI infoframe helpers
  drm: Add EDID helper documentation
  drm: Add HDMI infoframe helpers
  video: Add generic HDMI infoframe helpers
  drm: Add some missing forward declarations
  drm: Move mode tables to drm_edid.c
  drm: Remove duplicate drm_mode_cea_vic()
  gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
  ...

Pull vfs fix from Al Viro:
 "Fix for 3.8 breakage introduced by "vfs: Allow unprivileged
  manipulation of the mount namespace" - accessing mnt->mnt_ns is done
  there without needed locking *and* without any real need.

  Definite -stable fodder, fortunately not going too far back.

  This is *not* all - there will be much bigger vfs pull request
  tomorrow."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  get rid of unprotected dereferencing of mnt->mnt_ns

Pull user namespace and namespace infrastructure changes from Eric W Biederman:
 "This set of changes starts with a few small enhnacements to the user
  namespace.  reboot support, allowing more arbitrary mappings, and
  support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
  user namespace root.

  I do my best to document that if you care about limiting your
  unprivileged users that when you have the user namespace support
  enabled you will need to enable memory control groups.

  There is a minor bug fix to prevent overflowing the stack if someone
  creates way too many user namespaces.

  The bulk of the changes are a continuation of the kuid/kgid push down
  work through the filesystems.  These changes make using uids and gids
  typesafe which ensures that these filesystems are safe to use when
  multiple user namespaces are in use.  The filesystems converted for
  3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs.  The
  changes for these filesystems were a little more involved so I split
  the changes into smaller hopefully obviously correct changes.

  XFS is the only filesystem that remains.  I was hoping I could get
  that in this release so that user namespace support would be enabled
  with an allyesconfig or an allmodconfig but it looks like the xfs
  changes need another couple of days before it they are ready."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
  cifs: Enable building with user namespaces enabled.
  cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
  cifs: Convert struct cifs_sb_info to use kuids and kgids
  cifs: Modify struct smb_vol to use kuids and kgids
  cifs: Convert struct cifsFileInfo to use a kuid
  cifs: Convert struct cifs_fattr to use kuid and kgids
  cifs: Convert struct tcon_link to use a kuid.
  cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
  cifs: Convert from a kuid before printing current_fsuid
  cifs: Use kuids and kgids SID to uid/gid mapping
  cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
  cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
  cifs: Override unmappable incoming uids and gids
  nfsd: Enable building with user namespaces enabled.
  nfsd: Properly compare and initialize kuids and kgids
  nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
  nfsd: Modify nfsd4_cb_sec to use kuids and kgids
  nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
  nfsd: Convert nfsxdr to use kuids and kgids
  nfsd: Convert nfs3xdr to use kuids and kgids
  ...

Pull KVM ARM compile fixes from Gleb Natapov:
 "Fix ARM KVM compilation breakage due to changes from kvm.git"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  ARM: KVM: fix compilation after removal of user_alloc from struct kvm_memory_slot
  ARM: KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS
  ARM: KVM: fix kvm_arch_{prepare,commit}_memory_region

Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.9:

   - Added accelerated implementation of crc32 using pclmulqdq.

   - Added test vector for fcrypt.

   - Added support for OMAP4/AM33XX cipher and hash.

   - Fixed loose crypto_user input checks.

   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (43 commits)
  crypto: user - ensure user supplied strings are nul-terminated
  crypto: user - fix empty string test in report API
  crypto: user - fix info leaks in report API
  crypto: caam - Added property fsl,sec-era in SEC4.0 device tree binding.
  crypto: use ERR_CAST
  crypto: atmel-aes - adjust duplicate test
  crypto: crc32-pclmul - Kill warning on x86-32
  crypto: x86/twofish - assembler clean-ups: use ENTRY/ENDPROC, localize jump labels
  crypto: x86/sha1 - assembler clean-ups: use ENTRY/ENDPROC
  crypto: x86/serpent - use ENTRY/ENDPROC for assember functions and localize jump targets
  crypto: x86/salsa20 - assembler cleanup, use ENTRY/ENDPROC for assember functions and rename ECRYPT_* to salsa20_*
  crypto: x86/ghash - assembler clean-up: use ENDPROC at end of assember functions
  crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC
  crypto: cast6-avx: use ENTRY()/ENDPROC() for assembler functions
  crypto: cast5-avx: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: camellia-x86_64/aes-ni: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: blowfish-x86_64: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: aesni-intel - add ENDPROC statements for assembler functions
  crypto: x86/aes - assembler clean-ups: use ENTRY/ENDPROC, localize jump targets
  crypto: testmgr - add test vector for fcrypt
  ...

[airlied: hack for now until we fix cma helpers on other OF platforms]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Pull ia64 update from Tony Luck:
 "ia64 vm patch series that was cooking in -mm tree"

* tag 'please-pull-vm_unwrapped' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  mm: use vm_unmapped_area() in hugetlbfs on ia64 architecture
  mm: use vm_unmapped_area() on ia64 architecture

Pull security subsystem fixes from James Morris:
 "From Mimi:

    Both of these patches are bug fixes for patches, which were
    upstreamed in this open window.  The first patch addresses a merge
    issue.  The second patch addresses a CONFIG_BLOCK dependency."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  block: fix part_pack_uuid() build error
  ima: "remove enforce checking duplication" merge fix

Pull ktest update from Steven Rostedt:
 "Added ability to have all builds test warnings.

  Fixed failing reboot when the reboot produces a non fatal error.

  Config reading fixes and other cleanups"

* tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Remove indexes from warnings check
  ktest: Ignore warnings during reboot
  ktest: Search for linux banner for successful reboot
  ktest: Add make_warnings_file and process full warnings
  ktest: Allow a test option to use its default option
  ktest: Strip off '\n' when reading which files were modified
  ktest: Do not require CONSOLE for build or install bisects

Pull module update from Rusty Russell:
 "The sweeping change is to make add_taint() explicitly indicate whether
  to disable lockdep, but it's a mechanical change."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Add option to not sign modules during modules_install
  MODSIGN: Add -s <signature> option to sign-file
  MODSIGN: Specify the hash algorithm on sign-file command line
  MODSIGN: Simplify Makefile with a Kconfig helper
  module: clean up load_module a little more.
  modpost: Ignore ARC specific non-alloc sections
  module: constify within_module_*
  taint: add explicit flag to show whether lock dep is still OK.
  module: printk message when module signature fail taints kernel.

The name of FEATURE_AUTOSUSPEND is very misleading and the actual
meaning is remote wakeup, but a device incapable of remote wakeup
still can support USB autosuspend under some situations, so rename
it to avoid misunderstanding.

Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b2d4b150(smsc95xx: enable dynamic autosuspend) implements
autosuspend, but breaks current runtime suspend, such as:
when the interface becomes down, the usb device can't be put into
runtime suspend any more.

This patch fixes the broken runtime suspend.

Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The three below functions:

	smsc95xx_enter_suspend0()
	smsc95xx_enter_suspend1()
	smsc95xx_enter_suspend2()

return > 0 in case of success, so they will cause smsc95xx_suspend()
to return > 0 and cause suspend failure.

The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling
in suspend failure case).

Cc: <stable@vger.kernel.org>		[3.8]
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>