- 02 Nov, 2022 14 commits
-
-
Christoph Hellwig authored
apple_nvme_reset_work schedules apple_nvme_remove, to be called, which will call apple_nvme_disable and unquiesce the I/O queues. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20221101150050.3510-10-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
nvme_remove_dead_ctrl schedules nvme_remove to be called, which will call nvme_dev_disable and unquiesce the I/O queues. Signed-off-by:
-
Christoph Hellwig authored
nvme_kill_queues does two things: 1) mark the gendisk of all namespaces dead 2) unquiesce all I/O queues These used to be be intertwined due to block layer issues, but aren't any more. So move the unquiscing of the I/O queues into the callers, and rename the rest of the function to the now more descriptive nvme_mark_namespaces_dead. Signed-off-by:
-
Christoph Hellwig authored
None of the callers of nvme_kill_queues needs it to unquiesce the admin queues, as all of them already do it themselves: 1) nvme_reset_work explicit call nvme_start_admin_queue toward the beginning of the function. The extra call to nvme_start_admin_queue in nvme_reset_work this won't do anything as NVME_CTRL_ADMIN_Q_STOPPED will already be cleared. 2) nvme_remove calls nvme_dev_disable with shutdown flag set to true at the very beginning of the function if the PCIe device was not present, which is the precondition for the call to nvme_kill_queues. nvme_dev_disable already calls nvme_start_admin_queue toward the end of the function when the shutdown flag is set to true, so the admin queue is already enabled at this point. 3) nvme_remove_dead_ctrl schedules a workqueue to unbind the driver, which will end up in nvme_remove, which calls nvme_dev_disable with the shutdown flag. This case will call nvme_start_admin_queue a bit later than before. 4) apple_nvme_remove uses the same sequence as nvme_remove_dead_ctrl above. 5) nvme_remove_namespaces only calls nvme_kill_queues when the controller is in the DEAD state. That can only happen in the PCIe driver, and only from nvme_remove. See item 2) above for the conditions there. So it is safe to just remove the call to nvme_start_admin_queue in nvme_kill_queues without replacement. Signed-off-by: -
Christoph Hellwig authored
At the point where namespaces are marked dead, the controller is in a non-live state and we won't get pass the identify commands. Signed-off-by:
-
Christoph Hellwig authored
The NVME_NS_DEAD check only made sense when we revalidated namespaces in nvme_passthrough_end for commands that affected the namespace inventory. These days NVME_NS_DEAD is only set during reset or when tearing down namespaces, and we always remove all namespaces right after that. Signed-off-by:
-
Christoph Hellwig authored
The call to nvme_remove_invalid_namespaces made sense when nvme_passthru_end revalidated all namespaces and had to remove those that didn't exist any more. Since we don't revalidate from nvme_passthru_end now, this call is entirely spurious. Signed-off-by:
-
Christoph Hellwig authored
The code to create, update or delete a tagset and namespaces in nvme_reset_work is a bit convoluted. Refactor it with a two high-level conditionals for first probe vs reset and I/O queues vs no I/O queues to make the code flow more clear. Signed-off-by:
-
Christoph Hellwig authored
nvme and xen-blkfront are already doing this to stop buffered writes from creating dirty pages that can't be written out later. Move it to the common code. This also removes the comment about the ordering from nvme, as bd_mutex not only is gone entirely, but also hasn't been used for locking updates to the disk size long before that, and thus the ordering requirement documented there doesn't apply any more. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Chao Leng <lengchao@huawei.com> Reviewed-by:
-
Yu Kuai authored
Prevent unnecessary format conversion for bfqg->bfqd in multiple places. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Paolo Valente <paolo.valente@unimore.it> Link: https://lore.kernel.org/r/20221102022542.3621219-6-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
Such code are not even compiled since they are inside marco "#if 0". Signed-off-by:
-
Yu Kuai authored
Just make the code a litter cleaner by removing the unnecessary variable 'sd'. Signed-off-by:
-
Yu Kuai authored
Current code is a bit ugly and hard to read. Signed-off-by:
-
Yu Kuai authored
After the patch "block, bfq: cleanup bfq_weights_tree add/remove apis"), the local variable 'bfqd' is not used anymore, thus remove it. Signed-off-by:
-
- 01 Nov, 2022 15 commits
-
-
Kemeng Shi authored
We only need a max queue depth for every iolatency to limit the inflight io number. Replace struct rq_depth with unsigned int to simplfy "struct iolatency_grp" and save memory. Signed-off-by:
Kemeng Shi <shikemeng@huawei.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20221018111240.22612-4-shikemeng@huawei.comSigned-off-by:
-
Kemeng Shi authored
Default queue depth of iolatency_grp is unlimited, so we scale down quickly(once by half) in scale_cookie_change. Remove the "subtract 1/16th" part which is not the truth and add the actual way we scale down. Signed-off-by:
-
Kemeng Shi authored
Function blkcg_iolatency_throttle will make sure blkg->parent is not NULL before calls check_scale_change. And function check_scale_change is only called in blkcg_iolatency_throttle. Signed-off-by:
-
Christoph Hellwig authored
Split an elevator_disable helper from elevator_switch for the case where we want to switch to no scheduler at all. This includes removing the pointless elevator_switch_mq helper and removing the switch to no schedule logic from blk_mq_init_sched. Signed-off-by:
-
Christoph Hellwig authored
Checking for the required features in the callers simplifies the code quite a bit, so do that. Signed-off-by:
-
Christoph Hellwig authored
Just compare the pointers instead of using the string based elevator_match. Signed-off-by:
-
Christoph Hellwig authored
Use eq for the elevator_queue as done elsewhere. This frees e to be used for the loop iterator instead of the odd __ prefix. In addition rename elv to cur to make it more clear it is the currently selected elevator. Signed-off-by:
-
Christoph Hellwig authored
If the tag_set has BLK_MQ_F_NO_SCHED flag set we will never show any scheduler, so exit early. Signed-off-by:
-
Christoph Hellwig authored
Do the request_module and repeated lookup in the only caller that cares, pick a saner name that explains where are actually doing a lookup and use a sane calling conventions that passes the queue first. Signed-off-by:
-
Yu Kuai authored
It's the same with bfq_weights_tree_remove() now. Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220916071942.214222-7-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
The 'bfq_data' and 'rb_root_cached' can both be accessed through 'bfq_queue', thus only pass 'bfq_queue' as parameter. Signed-off-by:
-
Yu Kuai authored
Now that root group is counted into 'num_groups_with_pending_reqs', 'num_groups_with_pending_reqs > 0' is always true in bfq_asymmetric_scenario(). Thus change the condition to '> 1'. On the other hand, this change can enable concurrent sync io if only one group is activated. Signed-off-by:
-
Yu Kuai authored
Currently, bfq can't handle sync io concurrently as long as they are not issued from root group. This is because 'bfqd->num_groups_with_pending_reqs > 0' is always true in bfq_asymmetric_scenario(). The way that bfqg is counted into 'num_groups_with_pending_reqs': Before this patch: 1) root group will never be counted. 2) Count if bfqg or it's child bfqgs have pending requests. 3) Don't count if bfqg and it's child bfqgs complete all the requests. After this patch: 1) root group is counted. 2) Count if bfqg have pending requests. 3) Don't count if bfqg complete all the requests. With this change, the occasion that only one group is activated can be detected, and next patch will support concurrent sync io in the occasion. Signed-off-by:
-
Yu Kuai authored
Prepare to refactor the counting of 'num_groups_with_pending_reqs'. Add a counter in bfq_group, update it while tracking if bfqq have pending requests and when bfq_bfqq_move() is called. Signed-off-by:
-
Yu Kuai authored
If entity belongs to bfqq, then entity->in_groups_with_pending_reqs is not used currently. This patch use it to track if bfqq has pending requests through callers of weights_tree insertion and removal. Signed-off-by:
-
- 31 Oct, 2022 4 commits
-
-
Jinlong Chen authored
The calling relationship in blk_mq_destroy_queue() is as follows: blk_mq_destroy_queue() ... -> blk_queue_start_drain() -> blk_freeze_queue_start() <- called ... -> blk_freeze_queue() -> blk_freeze_queue_start() <- called again -> blk_mq_freeze_queue_wait() ... So there is a redundant call to blk_freeze_queue_start(). Replace blk_freeze_queue() with blk_mq_freeze_queue_wait() to avoid the redundant call. Signed-off-by:Jinlong Chen <nickyc975@zju.edu.cn> Reviewed-by:
-
Jinlong Chen authored
The only caller that needs queue_is_mq check is del_gendisk, so move the check into it. Signed-off-by:
-
Dawei Li authored
Convert current looping-based implementation into bit operation, which can bring improvement for: 1) bitops is more efficient for its arch-level optimization. 2) Given that blksize_bits() is inline, _if_ @size is compile-time constant, it's possible that order_base_2() _may_ make output compile-time evaluated, depending on code context and compiler behavior. Signed-off-by:
Dawei Li <set_pte_at@outlook.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
David Jeffery authored
David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic. So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge. But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: virtualization@lists.linux-foundation.org Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
-
- 25 Oct, 2022 7 commits
-
-
Bart Van Assche authored
This patch removes a conditional jump from get_max_segment_size(). The x86-64 assembler code for this function without this patch is as follows: 206 return min_not_zero(mask - offset + 1, 0x0000000000000118 <+72>: not %rax 0x000000000000011b <+75>: and 0x8(%r10),%rax 0x000000000000011f <+79>: add $0x1,%rax 0x0000000000000123 <+83>: je 0x138 <bvec_split_segs+104> 0x0000000000000125 <+85>: cmp %rdx,%rax 0x0000000000000128 <+88>: mov %rdx,%r12 0x000000000000012b <+91>: cmovbe %rax,%r12 0x000000000000012f <+95>: test %rdx,%rdx 0x0000000000000132 <+98>: mov %eax,%edx 0x0000000000000134 <+100>: cmovne %r12d,%edx With this patch applied: 206 return min(mask - offset, (unsigned long)lim->max_segment_size - 1) + 1; 0x000000000000003f <+63>: mov 0x28(%rdi),%ebp 0x0000000000000042 <+66>: not %rax 0x0000000000000045 <+69>: and 0x8(%rdi),%rax 0x0000000000000049 <+73>: sub $0x1,%rbp 0x000000000000004d <+77>: cmp %rbp,%rax 0x0000000000000050 <+80>: cmova %rbp,%rax 0x0000000000000054 <+84>: add $0x1,%eax Reviewed-by:
-
Bart Van Assche authored
Document which functions do not modify the queue limits. Reviewed-by:
-
Bart Van Assche authored
Commit c75e707f ("block: remove the per-bio/request write hint") removed all code that uses the struct request write_hint member. Hence also remove 'write_hint' itself. Reviewed-by:
-
Christoph Hellwig authored
bio_start_io_acct_time is not actually used anywhere, so remove it. Signed-off-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second admin queue reference to be held by the apple_nvme structure. Signed-off-by:
Sven Peter <sven@svenpeter.dev> Reviewed-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second admin queue reference to be held by the nvme_dev. Signed-off-by:
-
Christoph Hellwig authored
Now that blk_mq_destroy_queue does not release the queue reference, there is no need for a second queue reference to be held by the scsi_device. Signed-off-by:
-
