Use the standard array allocation variant of devm memory allocation
APIs.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20240125125401.597617-1-suma.hegde@amd.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Remove unnecessary parenthesis around hsmp_get_tbl_dram_base().
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-11-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

AMD supports connecting up to 8 AMD EPYCs in a system.
Hence, verify the num_sockets returned from amd_nb_num().
Also remove the WARN_ON() since the num_sockets is already verified.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-9-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

AMD EPYC family 0x1A and Model 0x0-0xF are having different
mailbox message ID offset compared to previous
platforms. In case of ACPI based BIOS, this information will be read
from ACPI table, for non-ACPI BIOS, this needs to be #defined.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-8-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

ACPI table provides mailbox base address and register offset
information. The base address is provided as part of CRS method
and mailbox offsets are provided through DSD table.
Sockets are differentiated by UIDs.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-7-suma.hegde@amd.com
[ij: Removed extra parenthesis.]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Split the creation of array of attribute groups and array of attributes
into different functions. This will ease the ACPI support.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-6-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

On an ACPI enabled platforms the probe is called for each socket
and the struct dev is different for each socket. This change
will help in handling both ACPI and non-ACPI platforms.

Also change pr_err() to dev_err() API.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-5-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Define struct hsmp_mbaddr_info with register offsets and populate
them during probe, which avoids the usage of macros in core functions.

During ACPI probe, the same fields can be populated from ACPI table.

Also move plat dev init to a static function.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-4-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Create a static function and call platform device alloc and add device,
which will simplify handling acpi and plat device probing.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-3-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Cache pci_dev obj during probe as part of struct hsmp_socket
and use in amd_hsmp_rdwr(). This change will make it easier to
support both non-ACPI and ACPI devices.

Also add a check for sock_index agsint number of sockets
in the hsmp_send_message().
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-2-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

This is in advance to supporting ACPI based probe.

In case of non-ACPI driver, hsmp_test() can be
performed either in plat init() or in probe().

however, in case of ACPI probing, hsmp_test() cannot
be called in init(), as the mailbox reg offsets and
base addresses are read from ACPI table in the probe().

Hence, move hsmp_test() to probe as preparation for
ACPI support.

Also use hsmp_send_message() directly in hsmp_test()
as the semaphore is already initialized in probe.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240106022532.1746932-1-suma.hegde@amd.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The device name inside the ACPI netlink event is limited to
15 characters, so the WMI device name will get truncated.

This can be observed with kacpimon when receiving an event
from WMI device "9DBB5994-A997-11DA-B012-B622A1EF5492":

	netlink:  9DBB5994-A997- 000000d0 00000000

Fix this by using the shorter device name from the ACPI
bus device instead. This still allows users to uniquely
identify the WMI device by using the notify id (0xd0).
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240121200824.2778-1-W_Armin@gmx.deReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.

coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().

> ./drivers/platform/mellanox/mlxbf-bootctl.c:466:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:584:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:635:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:686:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:737:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:788:8-16: WARNING: please use sysfs_emit
> ./drivers/platform/mellanox/mlxbf-bootctl.c:839:8-16: WARNING: please use sysfs_emit

No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240116045151.3940401-12-lizhijian@fujitsu.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

New Thinkpads have added a 'Mode' Function key that on Windows allows
you to choose the active profile (low-power, balanced, performance)

Added suppoort for this hotkey (F8), and have it cycle through the
options available.

Tested on X1 Carbon G12.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240120232949.317337-1-mpearson-lenovo@squebb.caReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Since 64f67b52 ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.

Positive side effect: There's no code dependency to ledtrig-audio any
longer, what allows to remove some Kconfig dependencies.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/daef7331-dcb4-4b3a-802e-656629486b4c@gmail.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The error message in this code can't be reached because value is either
zero or non-zero.  There isn't a third option.  Really, it's nicer to
write this as a one liner.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/a58bffb7-0a8b-4195-b273-f65a188ace7b@moroto.mountainSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The variable i is being initialized with the value 0 that is never
read, it is being re-assigned 0 again in a for-loop statement later
on. The initialization is redundant and can be removed.

The initialization of variable n can also be deferred after the
sanity check on pointer n and the declaration of all the int variables
can be combined as a final code clear-up.

Cleans up clang scan build warning:
warning: Value stored to 'i' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240106154740.55202-1-colin.i.king@gmail.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>