Pull arm64 fixes from Will Deacon:
 "The major fix here is for a filesystem corruption issue reported on
  Apple M1 as a result of buggy management of the floating point
  register state introduced in 6.8. I initially reverted one of the
  offending patches, but in the end Ard cooked a proper fix so there's a
  revert+reapply in the series.

  Aside from that, we've got some CPU errata workarounds and misc other
  fixes.

   - Fix broken FP register state tracking which resulted in filesystem
     corruption when dm-crypt is used

   - Workarounds for Arm CPU errata affecting the SSBS Spectre
     mitigation

   - Fix lockdep assertion in DMC620 memory controller PMU driver

   - Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
     disabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/fpsimd: Avoid erroneous elide of user state reload
  Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
  perf/arm-dmc620: Fix lockdep assert in ->event_init()
  Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: errata: Add workaround for Arm errata 3194386 and 3312417
  arm64: cputype: Add Neoverse-V3 definitions
  arm64: cputype: Add Cortex-X4 definitions
  arm64: barrier: Restore spec_bar() macro

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more non-mm updates from Andrew Morton:

 - A series ("kbuild: enable more warnings by default") from Arnd
   Bergmann which enables a number of additional build-time warnings. We
   fixed all the fallout which we could find, there may still be a few
   stragglers.

 - Samuel Holland has developed the series "Unified cross-architecture
   kernel-mode FPU API". This does a lot of consolidation of
   per-architecture kernel-mode FPU usage and enables the use of newer
   AMD GPUs on RISC-V.

 - Tao Su has fixed some selftests build warnings in the series
   "Selftests: Fix compilation warnings due to missing _GNU_SOURCE
   definition".

 - This pull also includes a nilfs2 fixup from Ryusuke Konishi.

* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
  nilfs2: make block erasure safe in nilfs_finish_roll_forward()
  selftests/harness: use 1024 in place of LINE_MAX
  Revert "selftests/harness: remove use of LINE_MAX"
  selftests/fpu: allow building on other architectures
  selftests/fpu: move FP code to a separate translation unit
  drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
  drm/amd/display: only use hard-float, not altivec on powerpc
  riscv: add support for kernel-mode FPU
  x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
  ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
  arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
  x86/fpu: fix asm/fpu/types.h include guard
  kbuild: enable -Wcast-function-type-strict unconditionally
  kbuild: enable -Wformat-truncation on clang
  ...

Pull more mm updates from Andrew Morton:
 "A series from Dave Chinner which cleans up and fixes the handling of
  nested allocations within stackdepot and page-owner"

* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/page-owner: use gfp_nested_mask() instead of open coded masking
  stackdepot: use gfp_nested_mask() instead of open coded masking
  mm: lift gfp_kmemleak_mask() to gfp.h

Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).

Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge trivial x86 code generation annoyances

 - Introduce helper macros for clang asm input problems

 - use said macros to improve trivially stupid code generation issues in
   bitops and array_index_mask_nospec

 - also improve codegen with 32-bit array index comparisons

None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.

* branch 'x86-codegen' of local tree:
  x86: improve bitop code generation with clang
  x86: improve array_index_mask_nospec() code generation
  clang: work around asm input constraint problems

This uses the new ASM_INPUT_RM macro to avoid the bad code generation
issue that clang has with more generic asm inputs.

This ends up avoiding generating code like this:

 	mov    %r10,(%rsp)
 	tzcnt  (%rsp),%rcx

which now becomes just

 	tzcnt  %r10,%rcx

and in the process ends up also removing a few unnecessary stack frames
when the only use was that pointless "asm uses memory location off stack".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't force the inputs to be 'unsigned long', when the comparison can
easily be done in 32-bit if that's more appropriate.

Note that while we can look at the inputs to choose an appropriate size
for the compare instruction, the output is fixed at 'unsigned long'.
That's not technically optimal either, since a 32-bit 'sbbl' would often
be sufficient.

But for the outgoing mask we don't know how the mask ends up being used
(ie we have uses that have an incoming 32-bit array index, but end up
using the mask for other things).  That said, it only costs the extra
REX prefix to always generate the 64-bit mask.

[ A 'sbbl' also always technically generates a 64-bit mask, but with the
  upper 32 bits clear: that's fine for when the incoming index that will
  be masked is already 32-bit, but not if you use the mask to mask a
  pointer afterwards, like the file table lookup does ]

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Work around clang problems with asm constraints that have multiple
possibilities, particularly "g" and "rm".

Clang seems to turn inputs like that into the most generic form, which
is the memory input - but to make matters worse, clang won't even use a
possible original memory location, but will spill the value to stack,
and use the stack for the asm input.

See

  https://github.com/llvm/llvm-project/issues/20571#issuecomment-980933442

for some explanation of why clang has this strange behavior, but the end
result is that "g" and "rm" really end up generating horrid code.

Link: https://github.com/llvm/llvm-project/issues/20571
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...

Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the small set of driver core and kernfs changes for 6.10-rc1.

  Nothing major here at all, just a small set of changes for some driver
  core apis, and minor fixups. Included in here are:

   - sysfs_bin_attr_simple_read() helper added and used

   - device_show_string() helper added and used

  All usages of these were acked by the various maintainers. Also in
  here are:

   - kernfs minor cleanup

   - removed unused functions

   - typo fix in documentation

   - pay attention to sysfs_create_link() failures in module.c finally

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  device property: Fix a typo in the description of device_get_child_node_count()
  kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
  scsi: Use device_show_string() helper for sysfs attributes
  platform/x86: Use device_show_string() helper for sysfs attributes
  perf: Use device_show_string() helper for sysfs attributes
  IB/qib: Use device_show_string() helper for sysfs attributes
  hwmon: Use device_show_string() helper for sysfs attributes
  driver core: Add device_show_string() helper for sysfs attributes
  treewide: Use sysfs_bin_attr_simple_read() helper
  sysfs: Add sysfs_bin_attr_simple_read() helper
  module: don't ignore sysfs_create_link() failures
  driver core: Remove unused platform_notify, platform_notify_remove

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver changes for 6.10-rc1. Not a lot
  of cleanups happening this kernel release, intern applications must be
  out of sync at the moment. But we did delete two drivers, wlan-ng and
  pi433, as they are no longer in use and the developers involved wanted
  them just gone entirely, allowing us to drop 19k lines from the tree.

  Other than the normal coding style cleanups here, there has been a lot
  of work on the vc04_services code, with the intent to finally get that
  out of staging hopefully soon. It's getting closer, which is nice to
  see.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (98 commits)
  staging: pi433: Remove unused driver
  staging: vchiq_core: Add missing blank lines
  staging: vchiq_core: Drop unnecessary blank lines
  staging: vchiq_core: Add parentheses to VCHIQ_MSG_SRCPORT
  staging: vchiq_core: Use printk messages for devices
  staging: vchiq_arm: Drop unnecessary NULL check
  staging: vc04_services: Delete unnecessary NULL check
  staging: vc04_services: vchiq_arm: Fix NULL ptr dereferences
  Staging: rtl8192e: Rename variable DssCCk
  Staging: rtl8192e: Rename variable ExtHTCapInfo
  Staging: rtl8192e: Rename variable MPDUDensity
  Staging: rtl8192e: Rename variable MaxRxAMPDUFactor
  Staging: rtl8192e: Rename variable MaxAMSDUSize
  Staging: rtl8192e: Rename variable DelayBA
  Staging: rtl8192e: Rename variable RxSTBC
  Staging: rtl8192e: Rename variable TxSTBC
  Staging: rtl8192e: Rename variable GreenField
  Staging: rtl8192e: Rename variable ShortGI20Mhz
  Staging: rtl8192e: Rename variable ShortGI40Mhz
  Staging: rtl8192e: Rename variable MimoPwrSave
  ...

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.10-rc1.
  Included in here are:

   - Usual good set of api cleanups and evolution by Jiri Slaby to make
     the serial interfaces move out of the 1990's by using kfifos
     instead of hand-rolling their own logic.

   - 8250_exar driver updates

   - max3100 driver updates

   - sc16is7xx driver updates

   - exar driver updates

   - sh-sci driver updates

   - tty ldisc api addition to help refuse bindings

   - other smaller serial driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
  serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  serial: imx: Raise TX trigger level to 8
  serial: 8250_pnp: Simplify "line" related code
  serial: sh-sci: simplify locking when re-issuing RXDMA fails
  serial: sh-sci: let timeout timer only run when DMA is scheduled
  serial: sh-sci: describe locking requirements for invalidating RXDMA
  serial: sh-sci: protect invalidating RXDMA on shutdown
  tty: add the option to have a tty reject a new ldisc
  serial: core: Call device_set_awake_path() for console port
  dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
  tty: serial: uartps: Add support for uartps controller reset
  arm64: zynqmp: Add resets property for UART nodes
  dt-bindings: serial: cdns,uart: Add optional reset property
  serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
  serial: 8250_exar: Keep the includes sorted
  serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
  serial: 8250_exar: Use BIT() in exar_ee_read()
  serial: 8250_exar: Switch to use dev_err_probe()
  serial: 8250_exar: Return directly from switch-cases
  serial: 8250_exar: Decrease indentation level
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
  Nothing hugely earth-shattering, just constant forward progress for
  hardware support of new devices and cleanups over the drivers.

  Included in here are:

   - Thunderbolt / USB 4 driver updates

   - typec driver updates

   - dwc3 driver updates

   - gadget driver updates

   - uss720 driver id additions and fixes (people use USB->arallel port
     devices still!)

   - onboard-hub driver rename and additions for new hardware

   - xhci driver updates

   - other small USB driver updates and additions for quirks and api
     changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
  usb: fotg210: Add missing kernel doc description
  usb: dwc3: core: Fix unused variable warning in core driver
  usb: typec: tipd: rely on i2c_get_match_data()
  usb: typec: tipd: fix event checking for tps6598x
  usb: typec: tipd: fix event checking for tps25750
  dt-bindings: usb: qcom,dwc3: fix interrupt max items
  usb: fotg210: Use *-y instead of *-objs in Makefile
  usb: phy: tegra: Replace of_gpio.h by proper one
  usb: typec: ucsi: displayport: Fix potential deadlock
  usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
  usb: musc: Remove unused list 'buffers'
  usb: dwc3: Wait unconditionally after issuing EndXfer command
  usb: gadget: u_audio: Clear uac pointer when freed.
  usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
  dt-bindings: usb: dwc3: Add QDU1000 compatible
  usb: core: Remove the useless struct usb_devmap which is just a bitmap
  MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
  USB: usb_parse_endpoint: ignore reserved bits
  usb: xhci: compact 'trb_in_td()' arguments
  ...

Pull LED updates from Lee Jones:
 "Core Frameworks:
   - Ensure seldom updated triggers have a brightness value before first
     update

  New Device Support:
   - Add support for Simatic IPC Device BX_59A to IPC LEDs Core
   - Add support for Qualcomm PMI8950 PWM to LPG Core

  New Functionality:
   - Add a bunch of new LED function identifiers
   - Add support for High Resolution Timers in LED Trigger Patten

  Fix-ups:
   - Shift out Audio Trigger to the Sound subsystem
   - Convert suitable calls to devm_* managed resources
   - Device Tree binding adaptions/conversions/creation
   - Remove superfluous code/variables/attributes and simplify overall
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations

  Bug Fixes:
   - Repair enabling Torch Mode from V4L2 on the second LED
   - Ensure PWM is disabled when suspending"

* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
  leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
  leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
  leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
  leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
  leds: sun50i-a100: Use match_string() helper to simplify the code
  leds: pwm: Disable PWM when going to suspend
  leds: trigger: pattern: Add support for hrtimer
  leds: mt6360: Fix the second LED can not enable torch mode by V4L2
  dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  leds: qcom-lpg: Add support for PMI8950 PWM
  leds: apu: Remove duplicate DMI lookup data
  leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
  dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
  dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
  leds: simatic-ipc-leds-gpio: Add support for module BX-59A
  dt-bindings: leds: qcom-lpg: Document PM6150L compatible
  dt-bindings: leds: pca963x: Convert text bindings to YAML
  leds: an30259a: Use devm_mutex_init() for mutex initialization
  leds: mlxreg: Use devm_mutex_init() for mutex initialization
  leds: nic78bx: Use devm API to cleanup module's resources
  ...

Pull backlight updates from Lee Jones:
 "Fix-ups:
   - FB Backlight interaction overhaul
   - Remove superfluous code and simplify overall
   - Constify various structs and struct attributes

  Bug Fixes:
   - Repair LED flickering
   - Fix signedness bugs"

* tag 'backlight-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (42 commits)
  backlight: sky81452-backlight: Remove unnecessary call to of_node_get()
  backlight: mp3309c: Fix LEDs flickering in PWM mode
  backlight: otm3225a: Drop driver owner assignment
  backlight: lp8788: Drop support for platform data
  backlight: lcd: Make lcd_class constant
  backlight: Make backlight_class constant
  backlight: mp3309c: Fix signedness bug in mp3309c_parse_fwnode()
  const_structs.checkpatch: add lcd_ops
  fbdev: omap: lcd_ams_delta: Constify lcd_ops
  fbdev: imx: Constify lcd_ops
  fbdev: clps711x: Constify lcd_ops
  HID: picoLCD: Constify lcd_ops
  backlight: tdo24m: Constify lcd_ops
  backlight: platform_lcd: Constify lcd_ops
  backlight: otm3225a: Constify lcd_ops
  backlight: ltv350qv: Constify lcd_ops
  backlight: lms501kf03: Constify lcd_ops
  backlight: lms283gf05: Constify lcd_ops
  backlight: l4f00242t03: Constify lcd_ops
  backlight: jornada720_lcd: Constify lcd_ops
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for X-Powers AXP717 PMIC to AXP22X
   - Add support for Rockchip RK816 PMIC to RK8XX
   - Add support for TI TPS65224 PMIC to TPS6594

  New Functionality:
   - Add Power Off functionality to Rohm BD71828
   - Allow I2C SMBus access in Renesas RSMU

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Shift Intel support over to MSI interrupts
   - Generify adding platform data away from being ACPI specific
   - Use device core supplied attribute to register sysfs entries
   - Replace hand-rolled functionality with generic APIs
   - Utilise centrally provided helpers and macros
   - Clean-up error handling
   - Remove superfluous/duplicated/unused sections
   - Trivial; spelling, whitespace, coding-style adaptions
   - More Maple Tree conversions"

* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  dt-bindings: mfd: Use full path to other schemas
  mfd: rsmu: support I2C SMBus access
  dt-bindings: mfd: Convert lp873x.txt to json-schema
  dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
  dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
  mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
  mfd: kempld: Remove custom DMI matching code
  mfd: cs42l43: Update patching revision check
  dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
  mfd: timberdale: Remove redundant assignment to variable err
  dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
  mfd: axp20x: Convert to use Maple Tree register cache
  mfd: bd71828: Remove commented code lines
  mfd: intel-m10-bmc: Change staging size to a variable
  dt-bindings: mfd: Add ROHM BD71879
  mfd: Tidy Kconfig dependency's parentheses
  mfd: ocelot-spi: Use spi_sync_transfer()
  dt-bindings: mfd: syscon: Add missing simple syscon compatibles
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Add byte/half-word compare-and-exchange, emulated via LR/SC loops

 - Support for Rust

 - Support for Zihintpause in hwprobe

 - Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()

 - Support lockless lockrefs

* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
  riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
  riscv: select ARCH_HAS_FAST_MULTIPLIER
  riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
  riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
  riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
  riscv: mm: Always use an ASID to flush mm contexts
  riscv: mm: Preserve global TLB entries when switching contexts
  riscv: mm: Make asid_bits a local variable
  riscv: mm: Use a fixed layout for the MM context ID
  riscv: mm: Introduce cntx2asid/cntx2version helper macros
  riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
  riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
  riscv: mm: Combine the SMP and UP TLB flush code
  riscv: Only send remote fences when some other CPU is online
  riscv: mm: Broadcast kernel TLB flushes only when needed
  riscv: Use IPIs for remote cache/TLB flushes by default
  riscv: Factor out page table TLB synchronization
  riscv: Flush the instruction cache during SMP bringup
  riscv: hwprobe: export Zihintpause ISA extension
  riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
  ...

Merge tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Select some options in Kconfig

 - Give a chance to build with !CONFIG_SMP

 - Switch to use built-in rustc target

 - Add new supported device nodes to dts

 - Some bug fixes and other small changes

 - Update the default config file

* tag 'loongarch-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Update Loongson-3 default config file
  LoongArch: dts: Add new supported device nodes to Loongson-2K2000
  LoongArch: dts: Add new supported device nodes to Loongson-2K0500
  LoongArch: dts: Remove "disabled" state of clock controller node
  LoongArch: rust: Switch to use built-in rustc target
  LoongArch: Fix callchain parse error with kernel tracepoint events again
  LoongArch: Give a chance to build with !CONFIG_SMP
  LoongArch: Select THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
  LoongArch: Select ARCH_WANT_DEFAULT_BPF_JIT
  LoongArch: Select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
  LoongArch: Select ARCH_HAS_FAST_MULTIPLIER

Pull microblaze updates from Michal Simek:

 - Cleanup code around removed early_printk

* tag 'microblaze-v6.10' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove early printk call from cpuinfo-static.c
  microblaze: Remove gcc flag for non existing early_printk.c file

Pull overlayfs updates from Miklos Szeredi:

 - Add tmpfile support

 - Clean up include

* tag 'ovl-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: remove duplicate included header
  ovl: remove upper umask handling from ovl_create_upper()
  ovl: implement tmpfile

Pull fuse updates from Miklos Szeredi:

 - Add fs-verity support (Richard Fung)

 - Add multi-queue support to virtio-fs (Peter-Jan Gootzen)

 - Fix a bug in NOTIFY_RESEND handling (Hou Tao)

 - page -> folio cleanup (Matthew Wilcox)

* tag 'fuse-update-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  virtio-fs: add multi-queue support
  virtio-fs: limit number of request queues
  fuse: clear FR_SENT when re-adding requests into pending list
  fuse: set FR_PENDING atomically in fuse_resend()
  fuse: Add initial support for fs-verity
  fuse: Convert fuse_readpages_end() to use folio_end_read()

Our applications, built on Elasticsearch[0], frequently create and
delete files.  These applications operate within containers, some with a
memory limit exceeding 100GB.  Over prolonged periods, the accumulation
of negative dentries within these containers can amount to tens of
gigabytes.

Upon container exit, directories are deleted.  However, due to the
numerous associated dentries, this process can be time-consuming.  Our
users have expressed frustration with this prolonged exit duration,
which constitutes our first issue.

Simultaneously, other processes may attempt to access the parent
directory of the Elasticsearch directories.  Since the task responsible
for deleting the dentries holds the inode lock, processes attempting
directory lookup experience significant delays.  This issue, our second
problem, is easily demonstrated:

  - Task 1 generates negative dentries:
  $ pwd
  ~/test
  $ mkdir es && cd es/ && ./create_and_delete_files.sh

  [ After generating tens of GB dentries ]

  $ cd ~/test && rm -rf es

  [ It will take a long duration to finish ]

  - Task 2 attempts to lookup the 'test/' directory
  $ pwd
  ~/test
  $ ls

  The 'ls' command in Task 2 experiences prolonged execution as Task 1
  is deleting the dentries.

We've devised a solution to address both issues by deleting associated
dentry when removing a file.  Interestingly, we've noted that a similar
patch was proposed years ago[1], although it was rejected citing the
absence of tangible issues caused by negative dentries.  Given our
current challenges, we're resubmitting the proposal.  All relevant
stakeholders from previous discussions have been included for reference.

Some alternative solutions are also under discussion[2][3], such as
shrinking child dentries outside of the parent inode lock or even
asynchronously shrinking child dentries.  However, given the
straightforward nature of the current solution, I believe this approach
is still necessary.

[ NOTE! This is a pretty fundamental change in how we deal with
  unlinking dentries, and it doesn't change the fact that you can have
  lots of negative dentries from just doing negative lookups.

  But the kernel test robot is at least initially happy with this from a
  performance angle, so I'm applying this ASAP just to get more testing
  and as a "known fix for an issue people hit in real life".

  Put another way: we should still look at the alternatives, and this
  patch may get reverted if somebody finds a performance regression on
  some other load.       - Linus ]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://github.com/elastic/elasticsearch [0]
Link: https://patchwork.kernel.org/project/linux-fsdevel/patch/1502099673-31620-1-git-send-email-wangkai86@huawei.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20240511200240.6354-2-torvalds@linux-foundation.org/ [2]
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wjEMf8Du4UFzxuToGDnF3yLaMcrYeyNAaH1NJWa6fwcNQ@mail.gmail.com/ [3]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Wangkai <wangkai86@huawei.com>
Cc: Colin Walters <walters@verbum.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/202405221518.ecea2810-oliver.sang@intel.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[bug]
In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved
to determine whether it is admin virtqueue, but this function vp_dev->is_avq
 may be empty. For installations, virtio_pci_legacy does not assign a value
 to vp_dev->is_avq.

[fix]
Check whether it is vp_dev->is_avq before use.

[test]
Test with virsh Attach device
Before this patch, the following command would crash the guest system

After applying the patch, everything seems to be working fine.
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Message-Id: <1710566754-3532-1-git-send-email-zhanglikernel@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This adds support for virtio-net to vduse.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When request_irq() fails, error path calls vp_del_vqs(). There, as vq is
present in the list, free_irq() is called for the same vector. That
causes following splat:

[    0.414355] Trying to free already-free IRQ 27
[    0.414403] WARNING: CPU: 1 PID: 1 at kernel/irq/manage.c:1899 free_irq+0x1a1/0x2d0
[    0.414510] Modules linked in:
[    0.414540] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc4+ #27
[    0.414540] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
[    0.414540] RIP: 0010:free_irq+0x1a1/0x2d0
[    0.414540] Code: 1e 00 48 83 c4 08 48 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 90 8b 74 24 04 48 c7 c7 98 80 6c b1 e8 00 c9 f7 ff 90 <0f> 0b 90 90 48 89 ee 4c 89 ef e8 e0 20 b8 00 49 8b 47 40 48 8b 40
[    0.414540] RSP: 0000:ffffb71480013ae0 EFLAGS: 00010086
[    0.414540] RAX: 0000000000000000 RBX: ffffa099c2722000 RCX: 0000000000000000
[    0.414540] RDX: 0000000000000000 RSI: ffffb71480013998 RDI: 0000000000000001
[    0.414540] RBP: 0000000000000246 R08: 00000000ffffdfff R09: 0000000000000001
[    0.414540] R10: 00000000ffffdfff R11: ffffffffb18729c0 R12: ffffa099c1c91760
[    0.414540] R13: ffffa099c1c916a4 R14: ffffa099c1d2f200 R15: ffffa099c1c91600
[    0.414540] FS:  0000000000000000(0000) GS:ffffa099fec40000(0000) knlGS:0000000000000000
[    0.414540] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.414540] CR2: 0000000000000000 CR3: 0000000008e3e001 CR4: 0000000000370ef0
[    0.414540] Call Trace:
[    0.414540]  <TASK>
[    0.414540]  ? __warn+0x80/0x120
[    0.414540]  ? free_irq+0x1a1/0x2d0
[    0.414540]  ? report_bug+0x164/0x190
[    0.414540]  ? handle_bug+0x3b/0x70
[    0.414540]  ? exc_invalid_op+0x17/0x70
[    0.414540]  ? asm_exc_invalid_op+0x1a/0x20
[    0.414540]  ? free_irq+0x1a1/0x2d0
[    0.414540]  vp_del_vqs+0xc1/0x220
[    0.414540]  vp_find_vqs_msix+0x305/0x470
[    0.414540]  vp_find_vqs+0x3e/0x1a0
[    0.414540]  vp_modern_find_vqs+0x1b/0x70
[    0.414540]  init_vqs+0x387/0x600
[    0.414540]  virtnet_probe+0x50a/0xc80
[    0.414540]  virtio_dev_probe+0x1e0/0x2b0
[    0.414540]  really_probe+0xc0/0x2c0
[    0.414540]  ? __pfx___driver_attach+0x10/0x10
[    0.414540]  __driver_probe_device+0x73/0x120
[    0.414540]  driver_probe_device+0x1f/0xe0
[    0.414540]  __driver_attach+0x88/0x180
[    0.414540]  bus_for_each_dev+0x85/0xd0
[    0.414540]  bus_add_driver+0xec/0x1f0
[    0.414540]  driver_register+0x59/0x100
[    0.414540]  ? __pfx_virtio_net_driver_init+0x10/0x10
[    0.414540]  virtio_net_driver_init+0x90/0xb0
[    0.414540]  do_one_initcall+0x58/0x230
[    0.414540]  kernel_init_freeable+0x1a3/0x2d0
[    0.414540]  ? __pfx_kernel_init+0x10/0x10
[    0.414540]  kernel_init+0x1a/0x1c0
[    0.414540]  ret_from_fork+0x31/0x50
[    0.414540]  ? __pfx_kernel_init+0x10/0x10
[    0.414540]  ret_from_fork_asm+0x1a/0x30
[    0.414540]  </TASK>

Fix this by calling deleting the current vq when request_irq() fails.

Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues"")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240426150845.3999481-1-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Add myself as a reviewer of some VirtIO areas I'm interested.

Until this point I've been scanning manually the list looking for
series that touches this area.  Adding myself to make this task easier.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240213182450.106796-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-Id: <67c2edf49788c27d5f7a49fc701520b9fcf739b5.1713088999.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

When there is a ctlq and it doesn't require interrupt
callbacks,the original method of calculating vectors
wastes hardware msi or msix resources as well as system
IRQ resources.

When conducting performance testing using testpmd in the
guest os, it was found that the performance was lower compared
to directly using vfio-pci to passthrough the device

In scenarios where the virtio device in the guest os does
not utilize interrupts, the vdpa driver still configures
the hardware's msix vector. Therefore, the hardware still
sends interrupts to the host os. Because of this unnecessary
action by the hardware, hardware performance decreases, and
it also affects the performance of the host os.

Before modification:(interrupt mode)
 32:  0   0  0  0 PCI-MSI 32768-edge    vp-vdpa[0000:00:02.0]-0
 33:  0   0  0  0 PCI-MSI 32769-edge    vp-vdpa[0000:00:02.0]-1
 34:  0   0  0  0 PCI-MSI 32770-edge    vp-vdpa[0000:00:02.0]-2
 35:  0   0  0  0 PCI-MSI 32771-edge    vp-vdpa[0000:00:02.0]-config

After modification:(interrupt mode)
 32:  0  0  1  7   PCI-MSI 32768-edge  vp-vdpa[0000:00:02.0]-0
 33: 36  0  3  0   PCI-MSI 32769-edge  vp-vdpa[0000:00:02.0]-1
 34:  0  0  0  0   PCI-MSI 32770-edge  vp-vdpa[0000:00:02.0]-config

Before modification:(virtio pmd mode for guest os)
 32:  0   0  0  0 PCI-MSI 32768-edge    vp-vdpa[0000:00:02.0]-0
 33:  0   0  0  0 PCI-MSI 32769-edge    vp-vdpa[0000:00:02.0]-1
 34:  0   0  0  0 PCI-MSI 32770-edge    vp-vdpa[0000:00:02.0]-2
 35:  0   0  0  0 PCI-MSI 32771-edge    vp-vdpa[0000:00:02.0]-config

After modification:(virtio pmd mode for guest os)
 32: 0  0  0   0   PCI-MSI 32768-edge   vp-vdpa[0000:00:02.0]-config

To verify the use of the virtio PMD mode in the guest operating
system, the following patch needs to be applied to QEMU:
https://lore.kernel.org/all/20240408073311.2049-1-yuxue.liu@jaguarmicro.comSigned-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Message-Id: <20240410033020.1310-1-yuxue.liu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-25-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-24-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-23-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

virtio core already sets the .owner, so driver does not need to.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-22-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-21-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-20-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-19-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-18-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-17-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-16-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>