For IDP variant, GPIO 20/21 is used by camera use case and camera
driver is not able acquire these GPIOs as it is acquired by UART5
driver as RTS/CTS pin.

UART5 is designed for debug UART for all the board variants of the
sc7280 chipset and RTS/CTS configuration is not required for debug
uart usecase.

Remove CTS/RTS configuration for UART5 instance and change compatible
string to debug UART.

Remove overwriting compatible property from individual target specific
file as it is not required.

Fixes: 38cd93f4 ("arm64: dts: qcom: sc7280: Update QUPv3 UART5 DT node")
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20240424075853.11445-1-quic_vdadhani@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
buses usecase on RB3gen2.
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424054602.5731-1-quic_vdadhani@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The SM8650-HDK is an embedded development platforms for the
Snapdragon 8 Gen 3 SoC aka SM8650, with the following features:
- Qualcomm SM8650 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
  - For Camera, Sensors and external Display cards
  - Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

Product Page: [3]

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard
[3] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-topic-sm8650-upstream-hdk-v4-2-b33993eaa2e8@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the Qualcomm SM8650 based HDK (Hardware Development Kit)
embedded development platform designed by Qualcomm and sold by Lantronix [1].

[1] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-topic-sm8650-upstream-hdk-v4-1-b33993eaa2e8@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Qcom SoCs doesn't support legacy PCI, but only PCIe. So use the correct
node name for the controller instances.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-21-1eb790c53e43@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8650 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-3-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8550 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-2-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8450 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Now the pcie1_phy exposes 2 clocks, properly add the pcie1_phy provided
clocks to the Global Clock Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-1-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The usb-role-switch property doesn't make sense for the USB hosts which
are fixed to the host USB data mode. Delete usb-role-switch property
from these hosts.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-12-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The usb-role-switch property doesn't make sense for the USB hosts which
are fixed to either host or peripheral USB data mode. Delete
usb-role-switch property being present in SoC dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-11-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The lanes from the USB-C SS port are connected to the combo USB+DP QMP
PHY rather than the SS port of the USB controller. Move the connection
endpoint to the QMP PHY out port.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-10-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-9-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-8-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-7-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-6-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-5-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-4-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-3-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-2-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-1-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add reset for display subsystem, make sure it gets
properly reset.
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-mdss-reset-v1-1-c0489e8be0d0@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The interconnects property was clearly copy-pasted between the 4 PCIe
controllers, giving all four the cpu-pcie path destination of SLAVE_0.

The four ports are all associated with CN0, but update the property for
correctness sake.

Fixes: d20b6c84 ("arm64: dts: qcom: sc8180x: Add PCIe instances")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-pcie-interconnect-port-fix-v1-1-f86affa02392@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The #power-domains property is no longer accepted according to the AOSS
QMP binding, drop it from the node.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-aop-validation-fix-v1-1-66cfa3c9ccf6@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The IPA BCM is already exposed by clk-rpmh, remove the interconnect
node for the same.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-drop-ipa-icc-v1-1-84ac4cf08fe3@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable PMK8350 RTC module that is found on qcs6490-rb3gen2.
Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Link: https://lore.kernel.org/r/20240523131528.3454431-1-quic_uchheda@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Pull irq fixes from Ingo Molnar:

 - Fix x86 IRQ vector leak caused by a CPU offlining race

 - Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

 - Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Pull x86 fixes from Ingo Molnar:

 - Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

 - Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

 - Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Pull ipmi updates from Corey Minyard:
 "Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Pull ceph updates from Ilya Dryomov:
 "A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened

Pull ntfs3 updates from Konstantin Komarov:
 "Fixes:
   - reusing of the file index (could cause the file to be trimmed)
   - infinite dir enumeration
   - taking DOS names into account during link counting
   - le32_to_cpu conversion, 32 bit overflow, NULL check
   - some code was refactored

  Changes:
   - removed max link count info display during driver init

  Remove:
   - atomic_open has been removed for lack of use"

* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Break dir enumeration if directory contents error
  fs/ntfs3: Fix case when index is reused during tree transformation
  fs/ntfs3: Mark volume as dirty if xattr is broken
  fs/ntfs3: Always make file nonresident on fallocate call
  fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
  fs/ntfs3: Use variable length array instead of fixed size
  fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
  fs/ntfs3: Check 'folio' pointer for NULL
  fs/ntfs3: Missed le32_to_cpu conversion
  fs/ntfs3: Remove max link count info display during driver init
  fs/ntfs3: Taking DOS names into account during link counting
  fs/ntfs3: remove atomic_open
  fs/ntfs3: use kcalloc() instead of kzalloc()

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes, both for stable"

* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: ignore trailing slashes in share paths
  ksmbd: avoid to send duplicate oplock break notifications

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Pull i3c updates from Alexandre Belloni:
 "Runtime PM (power management) is improved and hot-join support has
  been added to the dw controller driver.

  Core:
   - Allow device driver to trigger controller runtime PM

  Drivers:
   - dw: hot-join support
   - svc: better IBI handling"

* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: dw: Add hot-join support.
  i3c: master: Enable runtime PM for master controller
  i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
  i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
  i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()

Pull jffs2 updates from Richard Weinberger:

 - Fix illegal memory access in jffs2_free_inode()

 - Kernel-doc fixes

 - print symbolic error names

* tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: Fix potential illegal address access in jffs2_free_inode
  jffs2: Simplify the allocation of slab caches
  jffs2: nodemgmt: fix kernel-doc comments
  jffs2: print symbolic error name instead of error code