Array BIST is the second test supported by IFS. Modify IFS doc
entry to be more general.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-9-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Array BIST test (for a particular core) is triggered by writing
to MSR_ARRAY_BIST from one sibling of the core.

This will initiate a test for all supported arrays on that
CPU. Array BIST test may be aborted before completing all the
arrays in the event of an interrupt or other reasons.
In this case, kernel will restart the test from that point
onwards. Array test will also be aborted when the test fails,
in which case the test is stopped immediately without further
retry.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-8-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The interface to trigger Array BIST test and obtain its result
is similar to the existing scan test. The only notable
difference is that, Array BIST doesn't require any test content
to be loaded. So binary load related options are not needed for
this test.

Add sysfs interface for array BIST test, the testing support will
be added by subsequent patch.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-7-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Array BIST is a new type of core test introduced under the Intel Infield
Scan (IFS) suite of tests.

Emerald Rapids (EMR) is the first CPU to support Array BIST.
Array BIST performs tests on some portions of the core logic such as
caches and register files. These are different portions of the silicon
compared to the parts tested by the first test type
i.e Scan at Field (SAF).

Make changes in the device driver init flow to register this new test
type with the device driver framework. Each test will have its own
sysfs directory (intel_ifs_0 , intel_ifs_1) under misc hierarchy to
accommodate for the differences in test type and how they are initiated.

Upcoming patches will add actual support.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-6-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Define MSR bitfields for enumerating support for Array BIST test.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322003359.213046-5-jithu.joseph@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Cleanup incorporating misc review comments

 - Remove the subdirectory intel_ifs/0 for devicenode [1]
 - Make plat_ifs_groups non static and use it directly without using a
    function [2]

Link: https://lore.kernel.org/lkml/Y+4kQOtrHt5pdsSO@kroah.com/ [1]
Link: https://lore.kernel.org/lkml/Y9nyxNesVHCUXAcH@kroah.com/  [2]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322003359.213046-4-jithu.joseph@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The struct holding device driver data contained both read only(ro)
and read write(rw) fields.

Separating ro fields from rw fields was recommended as
a preferable design pattern during review[1].

Group ro fields into a separate const struct. Associate it to
the miscdevice being registered by keeping its pointer in the
same container struct as the miscdevice.

Link: https://lore.kernel.org/lkml/Y+9H9otxLYPqMkUh@kroah.com/ [1]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-3-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

In preparation to supporting additional tests, remove ifs_pkg_auth
from per-test scope, as it is only applicable for one test type.

This will simplify ifs_init() flow when multiple tests are added.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-2-jithu.joseph@intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add a new driver to allow various MSI laptops' functionalities to be
controlled from userspace. This includes such features as power
profiles (aka shift modes), fan speed, charge thresholds, LEDs, etc.

This driver contains EC memory configurations for different firmware
versions and exports battery charge thresholds to userspace (note,
that start and end thresholds control the same EC parameter
and are always 10% apart).

Link: https://github.com/BeardOverflow/msi-ec/
Link: https://github.com/BeardOverflow/msi-ec/pull/13
Cc: Aakash Singh <mail@singhaakash.dev>
Cc: Jose Angel Pastrana <japp0005@red.ujaen.es>
Signed-off-by: Nikita Kravets <teackot@gmail.com>
Link: https://lore.kernel.org/r/20230320225509.3559-1-teackot@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Summary of changes:

Till the commit:
"tools/power/x86/intel-speed-select: Get punit core mapping
information"

All patches just lays foundation for adding new hardware interface
in addition to existing MSR/MMIO interface.

All patches prefixed with "Abstract" just adds individual hardware
callback for functions called from the core processing.

The mailbox processing is abstracted to a new file with callbacks.

In addition some changes to reduce duplicated code for display
of TRL level.

Patch "Introduce Punit ID concept and add related API" add further
abstraction in addition to existing package and die scope.

-----------
tools/power/x86/intel-speed-select: Get punit core mapping information
-Adds a new way to get package/die/punit information for each CPU.
-----------

Introduce TPMI interface support
- Implement all abstracted callbacks above to use TPMI IOCTL interface.
-----------

tools/power/x86/intel-speed-select: Display punit info
- With TPMI the granularity is per punit, which can be multiple in a
package/die.
----------

tools/power/x86/intel-speed-select: Remove cpu mask display for non-cpu
power domain
tools/power/x86/intel-speed-select: Display fact info for non-cpu power
domain
-There are some power domains with no CPUs, the above patches adds CPU
as invalid for these domains
----------

tools/power/x86/intel-speed-select: Use cgroup v2 isolation
- Adds new option to use Cgroup CPU isolation instead of offline of CPUs
----------

tools/power/x86/intel-speed-select: Change TRL display for Emerald Rapids
- Emerald Rapid has multiple TRL levels and moves away from TRL level
based on instruction type

Update tool and supported API version. This is the first version which
supports newer Xeon platforms with TPMI support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Emerald Rapids doesn't specify TRL (Turbo Ratio Limits) based instruction
types. Instead it specifies 5 TRL levels, which can be anyone of the
instruction types.

Increase TRL levels to 5 for Emerald Rapids. Also change display to show
by level number. Show only non zero level values.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

There are some differences compared to Sapphire Rapids. So, add a separate
API.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

AMX frequency is present in non TPMI platforms also. When platform
supports, the value is non zero. So, display AMX base frequency when
non zero, irrespective of platform API version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

On supported systems, it is possiible to isolate CPUs instead of
CPU online/offline. This is optional and can be specified using
-g option when running as daemon or in combination with -o option
for SST-PP level change.

CPU isolation doesn't isolate IRQs. So IRQs needs to be moved away
from isoolated CPUs. This can be done via IRQ sysfs or irqbalance daemon.

The IRQ balance daemon is also capable to parse thermal HFI messages to
move IRQs away from CPUS, which are supposed be isolated. But this
requires version released after July 2022.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

During perf level change cpuset is allocated but not freed.
Add free_cpu_set() in success and failure path.

Although this is not an issue, as the program will exit after
processing of online/offline, but for completeness add the
free_cpu_set().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Comparing clos_config->clos_max with 255 is broken with TPMI I/F because
of different isst_get_disp_freq_multiplier() used.

Checking for clos_config->clos_max * isst_get_disp_freq_multiplier()
instead.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Some operations applies to cpu-power-domain only. Add check for cpu id
for these functions.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

If the new TDP level requetsted is same as the current TDP level, don't
call into driver to change level.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Non CPU power domains will not have any CPUs. So don't display any CPU
count or enable mask.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

TRL levels with Zero ratio values is meaningless.
Prevent these TRL levels from being displayed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow displaying SST-TF info for non-cpu power domain.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

level 0 name is not shown in some case for backward compatibility reason.
No need to keep this quirk for new api_version.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Non-cpu power domain does not support cpu clos config.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Some power domain may not have CPUs associated, allow displaying
information for these non-cpu power domains.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

amx_p1 and cooling_type are newly introduced for TPMI interface.

Display amx_p1 and cooling_type info for platforms that support them.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Display punit info for platforms with new api_version.
For platforms with old api_version, don't display the punit info to be
backward compatible.

For example:

Intel(R) Speed Select Technology
Executing on CPU model:173[0xad]
 package-0
  die-0
    powerdomain-0
      cpu-0
        get-config-current_level:0
 package-0
  die-0
    powerdomain-3
      cpu--1
        get-config-current_level:0
 package-0
  die-0
    powerdomain-4
      cpu--1
        get-config-current_level:0
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

TPMI (Topology Aware Register and PM Capsule Interface) creates a
flexible, extendable and software-PCIe-driver-enumerable MMIO interface
for PM features.

SST feature is exposed via the TPMI interface on newer Xeon platforms.

Kernel TPMI based SST driver provides a series of new IOCTLs for userspace
to use.

Introduce support for the platforms that do SST control via TPMI interface.

Compared with previous platforms, Newer Xeons also supports multi-punit in a
package/die, including cpu punit and non-cpu punit. These have already
been handled in the generic code.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Get punit core mapping information using format of MSR 0x54. Based
on the API version, decode is done using new format. The new format
also include a power domain ID. TPMI SST information is for each
power domain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

In some cases, the output format may be different with different
api_version because of different capabilities or for backward
capabilities reason.

Introduce api_version() to get the api_version of the platform running.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

clos_min/max in TPMI interface is frequency in MHz, thus clos_min/max
needs to support larger values.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Platform specific code also needs to give debug output.
Introduce is_debug_enabled() for this purpose.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Different api_version suggests different kernel driver used and
different interface is used to communication with the hardware.

Allow setting platform specific callbacks based on api_version.

Currently, all platforms with api_version 1 uses Mbox/MMIO interfaces.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

After the previous cleanup, there is no user of send_mbox_cmd outside of
isst-core-mbox.c.
Thus move send_mbox_cmd to isst-core-mbox.c as internal functions.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to adjust the uncore frequency.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to get SST-CP capability and
current state.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to set per core CLOS setting.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to get per core CLOS setting.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to set CLOS priority setting.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Allow platform specific implementation to get CLOS priority setting.

No functional changes are expected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>