- 03 Sep, 2014 40 commits
-
-
Ville Syrjälä authored
init_clock_gating() is too late to read out the mem_freq. We already want to print out the GPU MHz numbers before it's called. Move the mem_freq setup to init_gt_powersave(). v2: Also kill the CHV_CZ_CLOCK_FREQ_MODE_* defines Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Deepak S <deepak.s@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Use the pixel_size we got from drm_format_plane_cpp() instead of fb->bits_per_pixel/8 when computing the primary plane page/linear offsets. Avoids a few divs and makes the code more future proof against funky pixel formats where bits_per_pixel isn't well defined. This is what we already did in the sprite code. Note that the relevant sprite patch was commit ca320ac4 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Dec 19 12:14:22 2012 +0000 drm/i915: Use pixel size for computing linear offsets into a sprite This change was required on sprites because they support yuv formats which have fb->bits_per_pixel undefined. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add Chris' software archeology as a note to the commit message.] Signed-off-by:
-
Ville Syrjälä authored
During driver init we may not have a valid framebuffer for the primary plane even though the plane is enabled due to failed BIOS fb takeover. This means we have to avoid dereferencing the fb in .update_primary_plane() when disabling the plane. The introduction of the primary plane rotation in commit d91a2cb8e5104233c02bbde539bd4ee455ec12ac Author: Sonika Jindal <sonika.jindal@intel.com> Date: Fri Aug 22 14:06:04 2014 +0530 drm/i915: Add 180 degree primary plane rotation support caused a regression by trying to look up the pixel format before we can be sure there's a valid fb available. This isn't entirely unsurprising since the rotation patches originally predate the change to the primary plane code that calls .update_primary_plane() also when disabling the plane: commit fdd508a6 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Aug 8 21:51:11 2014 +0300 drm/i915: Call .update_primary_plane in intel_{enable, disable}_primary_hw_plane() v2: Warn but don't blow up when trying to enable a plane w/o an fb (Chris) Cc: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: -
Arun Siluvery authored
The workarounds that are applied are exported to a debugfs file; this is used to verify their state after the test case (reset or suspend/resume etc). This patch is only required to support i-g-t. Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
-
Arun Siluvery authored
For BDW workarounds are currently initialized in init_clock_gating() but they are lost during reset, suspend/resume etc; this patch moves the WAs that are part of register state context to render ring init fn otherwise default context ends up with incorrect values as they don't get initialized until init_clock_gating fn. v2: Add workarounds to golden render state This method has its own issues, first of all this is different for each gen and it is generated using a tool so adding new workaround and mainitaining them across gens is not a straightforward process. v3: Use LRIs to emit these workarounds (Ville) Instead of modifying the golden render state the same LRIs are emitted from within the driver. v4: Use abstract name when exporting gen specific routines (Chris) For: VIZ-4092 Signed-off-by:
-
Rodrigo Vivi authored
According to spec FBC on BDW and HSW are identical without any gaps. So let's copy the nuke and let FBC really start compressing stuff. Without this patch we can verify with false color that nothing is being compressed. With the nuke in place and false color it is possible to see false color debugs. Unfortunatelly on some rings like BCS on BDW we have to avoid Bits 22:18 on LRIs due to a high risk of hung. So, when using Blt ring for frontbuffer rend cache would never been cleaned and FBC would stop compressing buffer. One alternative is to cache clean on software frontbuffer tracking. v2: Fix rebase conflict. v3: Do not clean cache on BCS ring. Instead use sw frontbuffer tracking. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
Try to avoid confusion with ARRAY_SIZE()/2 and hdmi_level*2. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [danvet: Resolve silent patch conflict (didn't even fail to build) with with Sonika's preceding patch to use the hsw_ddi_translations_fdi table to driver the fdi link training iteration loop. Also drop the double-write loop Damien spotted.] Signed-off-by:
-
Sonika Jindal authored
Renaming the HSW-specific macros for ddi buffer translation slot to denote the slot and not the vswing/pre-emph values as they are platform-dependent. This patch is based on top of the patch series for renaming the DP training vswing/pre-emph defines: http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html v2: Creating single macro with argument for slot number (Damien) v3: Adding macro for num of translation entries (Damien) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
Damien Lespiau authored
Previously, it was possible for the GPU memory accesses to be swizzled to try to optimize the fetches for tiled buffers. This swizzling was on top of what the memory controller in the uncore already does. With broadwell, we drop that GPU side swizzling, and the corresponding initialization in 3 units (GAM, GT, DE). All those bits are reserved, as specs put it: Before Gen8, there was a historical configuration control field to swizzle address bit[6] for in X/Y tiling modes. This was set in three different places: TILECTL[1:0], ARB_MODE[5:4], and DISP_ARB_CTL[14:13]" For Gen8 the swizzle fields are all reserved, and the CPU's memory controller performs all address swizzling modifications. This also means that user space doesn't have to manually swizzle when accessing tiled buffers from the CPU, and so we always return I915_BIT_6_SWIZZLE_NONE from i915_gem_detect_bit_6_swizzle(), which short-circuits the initialization of the registers mentionned above in i915_gem_init_swizzling(). v2: Refine the explanation a bit more (Daniel) v3: Make it BDW+ specific (Steve) Cc: Steve Aarnio <steve.j.aarnio@linux.intel.com> Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Instead of going through hoops, just put the driver author directly as DRM_AUTHOR() argument. This will also make it consistent when we add Intel to the list. Signed-off-by:
-
Jani Nikula authored
Fix assert_panel_unlocked for vlv/chv, and improve it a bit for non-LVDS. Also don't pretend it works for DDI. There's still work to do to get this right for eDP on PCH platforms, but this is a start. v2: WARN_ON(HAS_DDI) Reviewed-by:
-
Vedang Patel authored
The patch introduces fixes for the debugfs attributes emitted by the i915 driver for GEN8. Currently, it is not emitting the correct attributes which include the status of RC6 states. Change-Id: Ib2068a0cac9a5wq3f228e547fa1a097ad369d242df Signed-off-by:
Vedang Patel <vedang.patel@intel.com> Signed-off-by:
-
Chris Wilson authored
Rather than describing an object as either "snooped or LLC", we can do better as we should know what machine we are running on! Signed-off-by:
-
Paulo Zanoni authored
On BDW we're seeing a problem that after we runtime resume, the outputs connected to DDI C are not detected: they don't appear in the SDEISR register and GMBUS transactions don't work. They stop working at the moment we call intel_opregion_notify_adapter() during runtime suspend, but they don't go back to work when we call the same function during runtime resume. They only work after we do a modeset and call intel_opregion_notify_encoder(), but this point is already too late. While debugging, I tried to pass PCI_D3hot which is the value that matches the spec, and it seems to have solved the problem. I couldn't find any explanation of why this solves the problem, but there's also no documented explanation - besides our code and git log - of why Haswell should use PCI_D1, so keep this for now in order to keep BDW runtime PM working. Also add a comment to point the fact that there's no spec documenting all the weirdness involved here. Cc: kristen.c.accardi@intel.com Testcase: igt/pm_rpm/drm-resources-equal Testcase: igt/pm_rpm/i2c Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
Because CHV uses cherryview_init_clock_gating instead of gen8_init_clock_gating. Signed-off-by:
-
Paulo Zanoni authored
Because BDW has WPT, which is equivalent to LPT. This is just like the CPT/PPT case. Signed-off-by:
-
Jani Nikula authored
Use the correct mask for the unlock bits. In theory this could have lead to incorrect asserts but this is unlikely in practise. Signed-off-by:
-
Thomas Daniel authored
These two functions make no sense in an Logical Ring Context & Execlists world. v2: We got rid of lrc_enabled and centralized everything in the sanitized i915.enable_execlists instead. Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> v3: Rebased. Corrected a typo in comment for i915_switch_context and added a comment that it should not be called in execlist mode. Added WARN_ON if i915_switch_context is called in execlist mode. Moved check for execlist mode out of i915_switch_context and into callers. Added comment in context_reset explaining why nothing is done in execlist mode. Signed-off-by:
Thomas Daniel <thomas.daniel@intel.com> [danvet: Simplify the patch subject so I can understand it.] Signed-off-by:
-
Deepak S authored
Programing GT IER interrupts was fumbled while enabling Interrupts for gen8 We forgot to program PM IER interrupt in gen8_gt_irq_postinstall based on the new re-worked interrupt routines. v2: Kill the loop and init GT interrupts individually (Ville) Signed-off-by:
-
Thomas Daniel authored
A pending commit removes synchronous mode from switch_mm. This breaks execlists because switch_mm will always try to write to the legacy ring buffer. Return immediately from i915_ppgtt_init_gw in execlists mode. No longer check for execlists mode in gen8_ppgtt_enable() because this will no longer be called in execlists mode. Signed-off-by:
-
Chris Wilson authored
Be sure to always flush a stuck pageflip even if we couldn't possibly expect one to be there. References: https://bugs.freedesktop.org/show_bug.cgi?id=82612Signed-off-by:
-
Michel Thierry authored
Unfortunately, the gem_obj/vma relationship is not symmetrical; a gem_obj can look up for the same vma more than once (where the ppgtt refcount is incremented), but will free the vma only once (i915_gem_free_object). This difference in refcount get/put means that the ppgtt is not removed after the context and vma are destroyed, because sometimes the refcount will never go back to zero. v2: Just move the ppgtt refcount into vma_create. OTC-Jira: VIZ-3719 Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Less pointless indentation is always nice. There will be a bit more code in this function once the power sequencer locking is fixed. Signed-off-by:
-
Ville Syrjälä authored
If we force vdd off warn if someone is still using it. With this change the delayed vdd off work needs to check want_panel_vdd itself to make sure it doesn't try to turn vdd off when someone is using it. Signed-off-by:
-
Ville Syrjälä authored
Looks nicer. Not functional change. Signed-off-by:
-
Ville Syrjälä authored
Add a comment to explain why we care about the current want_panel_vdd state in intel_dp_aux_ch(). Signed-off-by:
-
Ville Syrjälä authored
edp_* are now the lower level functions and intel_edp_* the higher level ones. One should use them in pairs. v2: Don't return void (Jani) Reviewed-by:
-
Ville Syrjälä authored
We want to use the higher level vdd on func here. Not a big deal yet (we'd just get the warn when things go awry) but when the locking gets fixed this becomes more important. Signed-off-by:
-
Ville Syrjälä authored
Passing the port as a parameter to PANEL_PORT_SELECT_VLV results in neater code. Sadly the PCH port select bits aren't suitable for the same treatment and the resulting macro would be much uglier, so leave those defines as is. Signed-off-by:
-
Thomas Daniel authored
A previous commit broke aliasing PPGTT for lrc, resulting in a kernel oops on boot. Add a check so that is full PPGTT is not in use the context is populated with the aliasing PPGTT. Issue: VIZ-4278 Signed-off-by:
-
Chris Wilson authored
In the move over to use BIOS connector configs, we lost the ability to force a specific set of connectors on or off. Try to remedy that by dropping back to the old behavior if we detect a hard coded connector config that tries to enable a connector (disabling is easy!). Based on earlier patches by Jesse Barnes. v2: Remove Jesse's patch Reported-by:
-
Ben Widawsky authored
v2: fix conflict on rebase. Cc: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Deepak S authored
We need do forcewake before Disabling RC6, This is what the BIOS expects while going into suspend. v2: updated commit message. (Daniel) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Deepak S <deepak.s@intel.com> Signed-off-by:
-
Damien Lespiau authored
Improve the debug message that tells us we've been waiting for a vblank that never arrived. Printing the pipe could lead a "doh!" moment where we've been waiting for a vblank on a pipe that was off for instance. Signed-off-by:
Thomas Wood <thomas.wood@intel.com> [danvet: Polish commit message a bit.] Signed-off-by:
-
Damien Lespiau authored
Chris has decided that enough is enough. It's time to fixup dev Vs dev_priv. This is a modest contribution to the crusade. v2: Still use INTEL_INFO(), for the (mythical!) case we want to hardcode the info struct with defines (Chris) Rename the macro argument from 'dev' to 'dev_priv' (Jani) v3: Use names unlikely to be used as macro arguments (Chris) Suggested-by: -
Jani Nikula authored
Signed-off-by:
-
Oscar Mateo authored
Since the ringbuffer does not belong per engine anymore, we have to make sure that we are always recording the correct ringbuffer. TODO: This is only a small fix to keep basic error capture working, but we need to add more information for it to be useful (e.g. dump the context being executed). v2: Reorder how the ringbuffer is chosen to clarify the change and rename the variable, both changes suggested by Chris Wilson. Also, add the TODO comment to the code, as suggested by Daniel. Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
