- 20 Nov, 2021 10 commits
-
-
Jakub Kicinski authored
Add a KUnit test for the dev_addr API. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Since all netdev->dev_addr modifications go via dev_addr_mod() we can put it on the list. When address is change remove it and add it back. Signed-off-by:
-
Jakub Kicinski authored
netdev->dev_addr should only be modified via helpers, but someone may be casting off the const. Add a runtime check to catch abuses. Signed-off-by:
-
Jakub Kicinski authored
There are no module callers in-tree and it's hard to justify why anyone would init or flush addresses of a netdev (note the flush is more of a destructor, it frees netdev->dev_addr). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. We converted all users to make modifications via appropriate helpers, make netdev->dev_addr const. The update helpers need to upcast from the buffer to struct netdev_hw_addr. Signed-off-by:
-
Jakub Kicinski authored
bnx2x_vfpf_config_mac() was constified by not its stub. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Hari Nagalla authored
Add support for the TI DP83561-SP Gigabit ethernet phy device. The dp83561-sp is a radiation hardened space grade gigabit ethernet PHY. It has been tested for single event latch upto 121 MeV, the critical reliability parameter for space designs. It interfaces directly to twisted pair media through an external transformer. And the device also interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII. DP83867, DP83869 and DP83561-SP, all these parts support 1000Base-T/ 100Base-TX/ and 10Base-Te standards and have similar register map for the core functionality. The data sheet for this part is at https://www.ti.com/product/DP83561-SPSigned-off-by:
Hari Nagalla <hnagalla@ti.com> Signed-off-by:
Geet Modi <geet.modi@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211118102532.9835-1-hnagalla@ti.comSigned-off-by:
-
Yang Li authored
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Eliminate the following coccicheck warning: ./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Eric Dumazet authored
Use const attribute where we can, and cache skb_dst() Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211119022355.2985984-1-eric.dumazet@gmail.comSigned-off-by:
-
- 19 Nov, 2021 30 commits
-
-
Bernard Zhao authored
simple_strtoull is obsolete, use kstrtol instead. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Yu Xiao authored
Removing reduplicated error handling when running into error path of `nfp_compile_flow_metadata`. Signed-off-by:
Yu Xiao <yu.xiao@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Add struct_group() to mark region of struct stats_reply_data that should be initialized, which can now be done in a single memset() call. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Add struct_group() to mark the region of struct iucv_sock that gets initialized to zero. Avoid the future warning: In function 'fortify_memset_chk', inlined from 'iucv_sock_alloc' at net/iucv/af_iucv.c:476:2: ./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 199 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Acked-by:Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/lkml/19ff61a0-0cda-6000-ce56-dc6b367c00d6@linux.ibm.com/Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_after() to clear everything after the dst_entry member of struct rt6_info. Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() so memset() doesn't get confused about writing beyond the destination member that is intended to be the starting point of zeroing through the end of the struct. Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() so memset() doesn't get confused about writing beyond the destination member that is intended to be the starting point of zeroing through the end of the struct. Signed-off-by:
-
Heiner Kallweit authored
Recently pci_read/write_vpd_any() have been added to the PCI VPD API. These functions allow to access VPD address space outside the auto-detected VPD, and they can be used to significantly simplify the eeprom ethtool ops. Tested with a 88E8070 card with 1KB EEPROM. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Christophe JAILLET authored
Use 'for_each_clear_bit()' instead of hand writing it. It is much less version. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct nig_stats around members egress_mac_pkt0_lo, egress_mac_pkt0_hi, egress_mac_pkt1_lo, and egress_mac_pkt1_hi (and the respective members in struct bnx2x_eth_stats), so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of struct bnx2x_eth_stats's rx_stat_ifhcinbadoctets_hi. "pahole" shows no size nor member offset changes to either struct. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Additionally adds BUILD_BUG_ON() to compare the separate struct group sizes. Reviewed-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Link: https://lore.kernel.org/lkml/DM5PR18MB2229B0413C372CC6E49D59A3B2C59@DM5PR18MB2229.namprd18.prod.outlook.comSigned-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct fw_eth_tx_pkt_vm_wr around members ethmacdst, ethmacsrc, ethtype, and vlantci, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of ethmacdst. "pahole" shows no size nor member offset changes to struct fw_eth_tx_pkt_vm_wr. "objdump -d" shows no object code changes. Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct rss_hdr around members imm_data and intr_gen, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of imm_data. "pahole" shows no size nor member offset changes to struct rss_hdr. "objdump -d" shows no object code changes. Signed-off-by:
-
Russell King (Oracle) authored
1000base-KX was missed in phylink_caps_to_linkmodes(), add it. This will be necessary to convert stmmac with xpcs to ensure we don't drop any supported linkmodes. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Karsten Graul says: ==================== s390/net: updates 2021-11-18 Please apply the following patches to netdev's net-next tree. Heiko provided fixes for kernel doc comments and solved some other compiler warnings. Julians qeth patch simplifies the rx queue handling in the code. ==================== Signed-off-by: -
Heiko Carstens authored
Fix allmodconfig + W=1 compile breakage: drivers/s390/net/lcs.c: In function ‘lcs_get_frames_cb’: drivers/s390/net/lcs.c:1823:25: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body] 1823 | ; // FIXME: error message ? | ^ Acked-by:Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Allow the compiler to recognize and check format strings and parameters. As reported with allmodconfig and W=1: drivers/s390/net/ctcm_dbug.c: In function ‘ctcm_dbf_longtext’: drivers/s390/net/ctcm_dbug.c:73:9: error: function ‘ctcm_dbf_longtext’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] 73 | vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args); | ^~~~~~~~~ Acked-by: -
Heiko Carstens authored
The second parameter as specified by the format string is actually a string not an integer. Acked-by:
-
Heiko Carstens authored
Fix kernel doc comments where appropriate, or remove incorrect kernel doc indicators. Acked-by:
-
Heiko Carstens authored
Fix kernel doc comments where appropriate or remove incorrect kernel doc indicators. Also move kernel doc comments directly before functions. Signed-off-by:
-
Julian Wiedmann authored
We always need an RX queue, and there's no reconfig situation either where we would need to free & rebuild the queue. So allocate the RX queue right from the start, and avoid freeing it during unrelated qeth_free_qdio_queues() calls. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: use eth_hw_addr_set() in arch-specific drivers Fixups for more arch-specific drivers. With these (and another patch which didn't fit) the build is more or less clean with all cross-compilers available on kernel.org. I say more or less because around half of the arches fail to build for unrelated reasons right now. Most of the changes here are for m68k, 32bit x86 and alpha. ==================== Signed-off-by: -
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
Byte by byte assignments. Fixes build on m68k. Signed-off-by:
-
Jakub Kicinski authored
dev_addr is set from IO reads, passed to an arch-specific helper. Note that the helper never reads it so uninitialized temp is fine. Fixes build on parisc. Signed-off-by:
-
Jakub Kicinski authored
dev_addr is set from IO reads, and broken from a u16 value. Fixes build on Alpha. Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by:
-
Jakub Kicinski authored
Use temp to pass to the reading function, the function is generic so can't fix there. Fixes m68k build. Signed-off-by:
-
Jakub Kicinski authored
Loop with offsetting to every second byte, so use a temp buffer. Fixes m68k build. Signed-off-by:
-
Jakub Kicinski authored
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on Alpha. Signed-off-by:
-
