The following KIQ ring test could guarantee the previous unmap
has been done.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SMU requires to interact with RLC when disable all features,
so RLC shouldn't be disabled ahead of SMU.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MP1 cannot access clock IP during MP1 FW reload, disable PLL
shutdown as a workaround.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
The uclk dpm feature is not supported by some certain navi10
board like 18202, while supported by some board like 18201.
It causes modprobe failure on 18202 board.

[how]
Disabled this feature by default, it can be enabled by module parameter
uclk_dpm_support=1.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No UVDW tile any more from VCN2.0, so mark out related fields.

It fixes error:
"[drm] Register(0) [mmUVD_PGFSM_STATUS] failed to reach value 0x002aaaaa != 0x00aaaaaa"
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable uclk dpm on navi10 as the result of
removing fast switch setting.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PPSMC_MSG_SetUclkFastSwitch message can be applied on vega20,
but can't on navi10. This is the prerequisite of uclk dpm on
navi10.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfx_v10_0_kiq_enable_kgq() is called only when async_gfx_ring is
enabled, so should gfx_v10_0_kiq_disable_kgq().
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

we already selected se/sh at the beginning of the for loop
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It enables MES FW backdoor loading in ip block functions.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After MES firmware gets loaded, it enables MES engine starting execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It implements MES firmware backdoor loading.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Free ucode GPU buffers.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate GPU buffer and upload mes data ucode to the buffer.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate GPU buffer and upload ucode firmware to the buffer.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It implements the CPU buffer destruction of ucode.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It requests MES firmware binary and uploads to CPU buffer.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The newly added fields is to store mes firmware related information.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The newly added firmware struct is for mes firmware file.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES requires two seperate firmwares: ucode and ucode data.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Incorrect programming with 64bit gpu address assignment for
32bit variable.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
When page fault happens, it could lead to sdma hang is RESP_MODE =
0 for non-PRT case.

[how]
Setting  SDMAx_UTCL1_CNTL.RESP_MODE to 0b011 to avoid SDMA halt.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's not needed for navi.

v2: remove unused variable (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable VCN power gating by default.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On navi1x, vcn dpm scheme was merged into powergating scheme.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It will cause bus hang to access register UVD_STATUS
when VCN is in the state of power gated.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add new interface for vcn powrergating and vcn dpm as well.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable vcn powergating in driver for navi10

v2: set vcn pg bit according to AMD_PG_SUPPORT_VCN flag
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For sw control power gating, it needs notify SMU to power up/down VCN
when enter/exit working state.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1). use PREEMPT_QUEUE instead of RESET_QUEUE for gfx ring disablement.
2). Need wait for unmapping queue done before continue execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch sets dpm_enabled flag but don't enable vcn dpm, because vcn dpm
doesn't work so far and we needs to enable the sysfs interfaces.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.15.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'adev->in_suspend' code path is missing in gfx_v10_0_gfx_init_queue()
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

temporarily disable to avoid s3 test failure.

s3 test failure log:
"[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout,
signaled seq=8278, emitted seq=8281"
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add new registers: mmCGTT_SPI_CLK_CTRL, mmDB_DEBUG3 and
mmGL2C_CGTT_SCLK_CTRL.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This dpm_enabled flag will be recognized as the VCN DPM enabled as well. In fact
VCN/DCN DPM on Navi10 is not good so far, so we cannot enable it for now.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to fix the incorrect type of pptable, otherwise, the data will be
totally wrong in parsing phase.
Signed-off-by: Kenneth Feng <Kenneth.Feng@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This header is actually for each asic, so we should not include in smu_v11_0.c.
And rename the one for navi10.

v2: add hack for XGMI (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Getting MAX_FAN_RPM value needs to be read by pptable, so it should be moved to
asic level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces new smu power source type, it's to handle the different
AC/DC source defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>