- 22 May, 2013 3 commits
-
-
Peter Hüwe authored
Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peter Hüwe authored
Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to e1000e, igb and ixgbe. Bruce Allan provide 2 minor cleanups for e1000e to resolve whitespace issues and build warnings about unused parameters. Carolyn provides a couple of fixes for igb, one being a fix for a possible panic when the interface is down and receive traffic arrives. The second fix resolves an issue on newer parts which have multiple checksum fields and set_ethtool was only checking to update the first checksum of the NVM image. Akeem provides majority of the changes in this patch set. Akeem provides a fix for e1000e on an issue reported from the community to resolve the issue of unlocking swflag_mutex for 82574 and 82583 devices even if the hardware semaphore was successfully acquired. The other patches from Akeem are against igb, where he adds support SFP module discovery, LED blink mechanism for devices using cathodes, LED support for i210/i211 parts and cleanup of a i2c function which was not being used. Matthew provides an update for igb to support a more accurate check for a PTP RX hang. Amir provides a patch for ixgbe to set the software prio_tc values at initialization to the hardware setting to remove the need to reset the device at the first time we call ixgbe_dcbnl_ieee_setets. ==================== Signed-off-by:
-
- 21 May, 2013 12 commits
-
-
Amir Hanania authored
Set the SW prio_tc values at initialization to the HW setting. Setting the SW prio_tc default values to be the HW setting by reading the rtrup2tc register. For any TC change we need to reset the device. This will remove the need to reset the device at the first time we call ixgbe_dcbnl_ieee_setets. Signed-off-by:
Amir Hanania <amir.hanania@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G. Abodunrin authored
This patch removes unused i2c function definition. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Akeem G. Abodunrin authored
This patch fixes LED issues with i210 and i211 devices, due to changes in the device registers. Signed-off-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Carolyn Wyborny authored
This patch reorders disabling napi and irqs during igb_down. This is done to avoid possible panic's found in other Intel drivers when Rx traffic arrives while interface is going down. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
-
Carolyn Wyborny authored
This patch fixes a problem where we were only checking to update checksum on first part of nvm image. Newer parts have multiple checksum fields and checksum function will accommodate that as long as we call it in the first place for any changes made. Signed-off-by:
-
Akeem G. Abodunrin authored
This path allows users to get appropriate flow control setting on SerDes devices, based on original implementation for Copper devices. Also, since 100baseFX does not support setting flow control, so exclude it from the setting mechanism. Signed-off-by:
-
Akeem G. Abodunrin authored
This patch adds support for SFP modules media type discovery for SGMII, which will enable driver to detect supported external PHYs, including 100baseFXSFP module. Signed-off-by:
-
Matthew Vick authored
In order to support a more accurate check for a PTP Rx hang where the device can no longer timestamp received packets, we need to update, per ring, when the last Rx timestamp was. Because of how the PTP Rx hang logic works, the current logic is valid, but properly updating the ring variable increases the accuracy of the check. Signed-off-by:
Matthew Vick <matthew.vick@intel.com> Tested-by:
-
Akeem G. Abodunrin authored
This patch addresses the changes needed to make LEDs work properly with negative logic. This implementation uses LED Invert bit to reverse the logic issue that occurred when LEDs are driven by cathode. Keep LEDs blinking for SerDes devices. Also made changes to magic number and the for loop to reduce number of shifts. Signed-off-by:
-
Akeem G. Abodunrin authored
This patch fixes the issue of unlocking swflag_mutex for 82574 and 82583 devices regardless of if the hw semaphore has been successfully acquired via e1000_get_hw_semaphore_82574(). With this patch, unlocking mutex now depends on if the hw semaphore was successfully acquired before. And 82574/82583 devices are reset regardless of whether e1000_get_hw_semaphore_82574() returns success or failure. Reported-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Bruce Allan authored
Signed-off-by:
-
- 20 May, 2013 25 commits
-
-
Florian Fainelli authored
There is currently no way for an Ethernet MAC driver servicing PHY link interrupts to notify this to the PHY state machine without defining its own state machine. Since most drivers are not so special, introduce a helper: phy_mac_interrupt() which can be called from a link up/down interrupt routine to update the PHY state machine. To avoid code duplication some refactoring has been done to expose the workqueue and its corresponding callback internally. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
When a PHY device is registered with the special IRQ value PHY_IGNORE_INTERRUPT (-2) it will not properly be handled by the PHY library: - it continues to poll its register, while we do not want this because such PHY link events or register changes are serviced by an Ethernet MAC - it will still try to configure PHY interrupts at the PHY level, such interrupts do not exist at the PHY but at the MAC level - the state machine only handles PHY_POLL, but should also handle PHY_IGNORE_INTERRUPT similarly This patch updates the PHY state machine and initialization paths to account for the specific PHY_IGNORE_INTERRUPT. Based on an earlier patch by Thomas Petazzoni, and reworked to add the missing bits. Add a helper phy_interrupt_is_valid() which specifically tests for a PHY interrupt not to be PHY_POLL or PHY_IGNORE_INTERRUPT and use it throughout the code. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Rasesh Mody authored
Driver and Firmware versions updated to 3.2.21.1. Signed-off-by:
Rasesh Mody <rmody@brocade.com> Signed-off-by:
-
Rasesh Mody authored
User should not be allowed to delete base function of eth port. Add a new field to the bfa ioc attributes structure to indicate if the given ioc is default function on the port or not. Signed-off-by:
-
Rasesh Mody authored
Failure of the UCAST set for base mac address fails when user configures a duplicate mac address that matches that of another vNIC on the same port. The bna does not handle the ucast failure and keeps this address in cache. On disable of the vNIC, bna tries to delete the failed base mac address and the fw asserts. On failure of ucast address, mark ucast address set to false. Signed-off-by:
-
Rasesh Mody authored
Driver configuration flags are retained across open/stop operations preventing configurations to be set in next open/stop. Setting MTU on a 1020 causes network to fail until a reboot is performed on the host. Clear the flags when configuration resets in hardware. Signed-off-by:
-
Tomasz Figa authored
This patch adds Device Tree support to dm9000 driver. Signed-off-by:
Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Daniel Borkmann authored
Follow-up on module_free()/vfree() that takes care of the rest, so no longer this workaround with work_struct needed. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Followup patch on module_free()/vfree() that takes care of the rest, so no longer this workaround with work_struct is needed. Signed-off-by:
-
Eric Dumazet authored
TCP md5 code uses per cpu variables but protects access to them with a shared spinlock, which is a contention point. [ tcp_md5sig_pool_lock is locked twice per incoming packet ] Makes things much simpler, by allocating crypto structures once, first time a socket needs md5 keys, and not deallocating them as they are really small. Next step would be to allow crypto allocations being done in a NUMA aware way. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Borkmann authored
The next pointer within the inet6_dev structure seems not to be used anywhere. So just remove it. Tested with allmodconfig on x86_64. Signed-off-by:
-
Willem de Bruijn authored
A cpu executing the network receive path sheds packets when its input queue grows to netdev_max_backlog. A single high rate flow (such as a spoofed source DoS) can exceed a single cpu processing rate and will degrade throughput of other flows hashed onto the same cpu. This patch adds a more fine grained hashtable. If the netdev backlog is above a threshold, IRQ cpus track the ratio of total traffic of each flow (using 4096 buckets, configurable). The ratio is measured by counting the number of packets per flow over the last 256 packets from the source cpu. Any flow that occupies a large fraction of this (set at 50%) will see packet drop while above the threshold. Tested: Setup is a muli-threaded UDP echo server with network rx IRQ on cpu0, kernel receive (RPS) on cpu0 and application threads on cpus 2--7 each handling 20k req/s. Throughput halves when hit with a 400 kpps antagonist storm. With this patch applied, antagonist overload is dropped and the server processes its complete load. The patch is effective when kernel receive processing is the bottleneck. The above RPS scenario is a extreme, but the same is reached with RFS and sufficient kernel processing (iptables, packet socket tap, ..). Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Fabio Estevam authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Wei Liu authored
We should correctly free related resources (grant ref, memory page, evtchn) when setup_netfront fails. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Tony Prisk authored
Add support for the VIA Velocity network driver to be bound to a OF created platform device. Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Tony Prisk authored
Remove the pci_* dma functions and replace with the more generic versions. In preparation of adding platform support, a new struct device *dev is added to struct velocity_info which can be used by both the pci and platform code. Signed-off-by:
-
Tony Prisk authored
Improve the clarity of the code in preparation for converting the dma functions to generic versions, which require a struct device *. This makes it possible to store a 'struct device *dev' in the velocity_info structure. Signed-off-by:
-
Sergei Shtylyov authored
It's suboptimal to invoke quite complex VORTEX_PCI() macro every time we want to get a 'struct pci_dev *' when we already have it in a variable... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Rolf Eike Beer authored
These 2 places are the only matches for is_eisa in the whole tree. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Eric Dumazet authored
bnx2x_set_features() forces a driver reload if GRO setting is changed. A reload makes the ethernet port unresponsive for about 5 seconds. This is not needed in the common case LRO is enabled, as LRO (TPA_ENABLE_FLAG) has precedence over GRO (GRO_ENABLE_FLAG) Tested: Verified that "ethtool -K eth0 gro {on|off}" doesn't blackout the NIC anymore Google-Bug-Id: 8440442 Signed-off-by:Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
David S. Miller authored
Nithin Nayak Sujir says: ==================== This series adds support for modifying EEE settings via ethtool. Since this can impact Link Flap Avoidance, the driver pulls the current hardware settings if LFA is enabled. This is similar to how we do the link settings to avoid a flap. v2: Fixes pointed out by Ben Hutchings. - Use MDIO_AN_EEE_LPABLE to set the lp_advertised field. - Check that tx_lpi_timer is within valid range. ==================== Signed-off-by: -
Nithin Sujir authored
Reviewed-by:
Ben Li <benli@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
Nithin Sujir authored
eee_config_ok() was checking only for mismatch in advertised settings. This patch expands the scope of eee_config_ok() to check for mismatch in the other eee settings. On mismatch we will require a call to tg3_setup_eee() to push the configured settings to the hardware. Reviewed-by:
-
Nithin Sujir authored
Add tg3_eee_pull_config() to pull the settings from the hardware and populate the eee structure. If Link Flap Avoidance is enabled, we pull the eee settings from the hw so as not to cause a phy reset on eee config mismatch later. This requires moving down tg3_setup_eee() below the tg3_pull_config() to not trample existing settings. Reviewed-by:
-
Nithin Sujir authored
Add an eee structure and update it with eee settings. This will be used for set/get_eee operations. Add common function tg3_setup_eee() that will be used in the subsequent patches. Reviewed-by:
-
