- 10 Sep, 2022 11 commits
-
-
Takashi Iwai authored
udl_alloc_urb_list() retires the allocation if there is no enough room left, and it reinitializes the stuff unnecessarily such as the linked list head and the waitqueue, which could be harmful. Those should be outside the retry loop. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
In the current design, udl_get_urb() may be called asynchronously during the driver freeing its URL list via udl_free_urb_list(). The problem is that the sync is determined by comparing the urbs.count and urbs.available fields, while we clear urbs.count field only once after udl_free_urb_list() finishes, i.e. during udl_free_urb_list(), the state becomes inconsistent. For fixing this inconsistency and also for hardening the locking scheme, this patch does a slight refactoring of the code around udl_get_urb() and udl_free_urb_list(). Now urbs.count is updated in the same spinlock at extracting a URB from the list in udl_free_url_list(). Acked-by:
-
Takashi Iwai authored
A couple of error handlings forgot to process the URB completion. Those are both with WARN_ON() so should be visible, but we must fix them in anyway. Fixes: 7350b2a3 ("drm/udl: Replace BUG_ON() with WARN_ON()") Acked-by:
-
Takashi Iwai authored
Just for some code simplification. Suggested-by:
-
Takashi Iwai authored
The alignment of damaged area was needed for the original udlfb driver that tried to trim the superfluous copies between front and backend buffers and handle data in long int. It's not the case for udl DRM driver, hence we can omit the whole unneeded alignment, as well as the dead code. Acked-by:
-
Takashi Iwai authored
It seems that the current size (4) for the URB list is too small on some devices, and it resulted in the occasional stalls. Increase the default URB list size to 20 for working around it. Acked-by:
-
Takashi Iwai authored
The driver may receive -EPROTO at the URB completion when the device gets disconnected, and it's a normal situation. Suppress the error print for that, too. Signed-off-by:
-
Takashi Iwai authored
This reverts the recent fix commit e25d5954 ("drm/udl: Kill pending URBs at suspend and disconnect") as it turned out to lead to potential hangup at a disconnection, and it doesn't help much for suspend/resume problem, either. Acked-by:
-
Thomas Zimmermann authored
Call drm_plane_enable_fb_damage_clips() and give userspace a chance of minimizing the updated display area. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-4-tiwai@suse.de
-
Thomas Zimmermann authored
Implement the reset_resume callback of struct usb_driver. Set the standard channel when called. Signed-off-by:
-
Takashi Iwai authored
Restore the display mode whne resuming from suspend. Currently, the display remains dark. On resume, the CRTC's mode does not change, but the 'active' flag changes to 'true'. Taking this into account when considering a mode switch restores the display mode. The bug is reproducable by using Gnome with udl and observing the adapter's suspend/resume behavior. Actually, the whole check added in udl_simple_display_pipe_enable() about the crtc_state->mode_changed was bogus. We should drop the whole check and always apply the mode change in this function. [ tiwai -- Drop the mode_changed check entirely instead, per Daniel's suggestion ] Fixes: 997d33c3 ("drm/udl: Inline DPMS code into CRTC enable and disable functions") Cc: <stable@vger.kernel.org> Suggested-by:
-
- 09 Sep, 2022 10 commits
-
-
Michał Winiarski authored
While we have multiple test cases, most of them check multiple conditions, calling the function that is tested multiple times with different arguments (with comments that indicate test case boundary). This usually means that it can be easily converted into multiple test cases. Passing output: ============================================================ ================= drm_format (18 subtests) ================= [PASSED] drm_format_block_width_invalid [PASSED] drm_format_block_width_one_plane [PASSED] drm_format_block_width_two_plane [PASSED] drm_format_block_width_three_plane [PASSED] drm_format_block_width_tiled [PASSED] drm_format_block_height_invalid [PASSED] drm_format_block_height_one_plane [PASSED] drm_format_block_height_two_plane [PASSED] drm_format_block_height_three_plane [PASSED] drm_format_block_height_tiled [PASSED] drm_format_min_pitch_invalid [PASSED] drm_format_min_pitch_one_plane_8bpp [PASSED] drm_format_min_pitch_one_plane_16bpp [PASSED] drm_format_min_pitch_one_plane_24bpp [PASSED] drm_format_min_pitch_one_plane_32bpp [PASSED] drm_format_min_pitch_two_plane [PASSED] drm_format_min_pitch_three_plane_8bpp [PASSED] drm_format_min_pitch_tiled =================== [PASSED] drm_format ==================== ============================================================ Testing complete. Ran 18 tests: passed: 18 Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Signed-off-by:
-
Michał Winiarski authored
drm_format_info_* functions don't return bool, and the info variable is a pointer. Expecting non-NULL info will cause the test to crash if it is NULL in checks that follow (which dereference it). Use appropriate KUNIT_EXPECT/KUNIT_ASSERT variants. Signed-off-by:
-
Chris Morgan authored
Add the compatible and GRF definitions for the RK3568 soc. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220906174823.28561-4-macroalpha82@gmail.com
-
Chris Morgan authored
The rk3568 uses the same dw-mipi-dsi controller as previous Rockchip SOCs, so add a compatible string for it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
wangjianli authored
Delete the redundant word 'in'. Signed-off-by:
wangjianli <wangjianli@cdjrlc.com> Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'to'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220824130450.41703-1-yuanjilin@cdjrlc.com
-
ye xingchen authored
From the coccinelle check: ./drivers/gpu/drm/omapdrm/omap_dmm_tiler.c Error:line 817 is redundant because platform_get_irq() already prints an error So,remove the unnecessary print function dev_err() Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Liang He authored
In dss_init_ports() and __dss_uninit_ports(), we should call of_node_put() for the reference returned by of_graph_get_port_by_id() in fail path or when it is not used anymore. Fixes: 09bffa6e ("drm: omap: use common OF graph helpers") Signed-off-by:
Liang He <windhl@126.com> Signed-off-by:
-
Guo Zhengkui authored
Fix the following coccicheck warning: drivers/gpu/drm/omapdrm/dss/dispc.c:2454:21-22: WARNING opportunity for max() Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
-
Maxime Ripard authored
Commit ec491291 ("drm/sun4i: tv: Merge mode_set into atomic_enable") has introduced a call to drm_atomic_get_new_crtc_state(), but didn't include drm_atomic.h. On CONFIG_OF systems, this is fine because drm_atomic.h is included by drm_of.h through drm_bridge.h. However, whenever CONFIG_OF isn't set, we end up with a compilation error. Fixes: ec491291 ("drm/sun4i: tv: Merge mode_set into atomic_enable") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220909093116.4141982-1-maxime@cerno.tech
-
- 08 Sep, 2022 4 commits
-
-
Imre Deak authored
When an MST connector stays enabled during a commit the connector's MST state needs to be added to the atomic state, but the corresponding MST payload allocation shouldn't be set for deletion; fix such modesets by ensuring the above even if the connector was already enabled before the modeset. The issue led to the following: [ 761.992923] i915 0000:00:02.0: drm_WARN_ON(payload->delete) [ 761.992949] WARNING: CPU: 6 PID: 1401 at drivers/gpu/drm/display/drm_dp_mst_topology.c:4221 drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992955] Modules linked in: snd_hda_intel i915 drm_buddy drm_display_helper drm_kms_helper ttm drm snd_hda_codec_hdmi snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm prime_numbers i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal cdc_ether coretemp crct10dif_pclmul usbnet crc32_pclmul mii ghash_clmulni_intel e1000e mei_me ptp i2c_i801 pps_core mei i2c_smbus intel_lpss_pci fuse [last unloaded: drm] [ 761.992986] CPU: 6 PID: 1401 Comm: testdisplay Tainted: G U 6.0.0-rc4-imre+ #565 [ 761.992989] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022 [ 761.992990] RIP: 0010:drm_dp_atomic_find_time_slots+0x236/0x280 [drm_display_helper] [ 761.992994] Code: 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 03 28 4e e1 48 c7 c1 8b 26 2c a0 4c 89 e2 48 c7 c7 a8 26 2c a0 48 89 c6 e8 31 d5 88 e1 <0f> 0b 49 8b 85 d0 00 00 00 4c 89 fa 48 c7 c6 a0 41 2c a0 48 8b 78 [ 761.992995] RSP: 0018:ffffc9000177ba60 EFLAGS: 00010286 [ 761.992998] RAX: 0000000000000000 RBX: ffff88810d2f1540 RCX: 0000000000000000 [ 761.992999] RDX: 0000000000000001 RSI: ffffffff82368a25 RDI: 00000000ffffffff [ 761.993000] RBP: ffff888142299d80 R08: ffff8884adbfdfe8 R09: 00000000ffefffff [ 761.993001] R10: ffff8884a6bfe000 R11: ffff8884ac443c30 R12: ffff888102972f90 [ 761.993002] R13: ffff8881163e2cf0 R14: 00000000000003ac R15: ffff88810c501000 [ 761.993003] FS: 00007f81e4c459c0(0000) GS:ffff888496500000(0000) knlGS:0000000000000000 [ 761.993004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 761.993005] CR2: 0000555dac962a98 CR3: 0000000123a34006 CR4: 0000000000770ee0 [ 761.993006] PKRU: 55555554 [ 761.993007] Call Trace: [ 761.993009] <TASK> [ 761.993012] intel_dp_mst_compute_config+0x19a/0x350 [i915] [ 761.993090] intel_atomic_check+0xf37/0x3180 [i915] [ 761.993168] drm_atomic_check_only+0x5d3/0xa60 [drm] [ 761.993182] drm_atomic_commit+0x56/0xc0 [drm] [ 761.993192] ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm] [ 761.993204] drm_atomic_helper_set_config+0x78/0xc0 [drm_kms_helper] [ 761.993214] drm_mode_setcrtc+0x1ed/0x750 [drm] [ 761.993232] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993241] drm_ioctl_kernel+0xb5/0x150 [drm] [ 761.993252] drm_ioctl+0x203/0x3d0 [drm] [ 761.993261] ? drm_mode_getcrtc+0x180/0x180 [drm] [ 761.993276] __x64_sys_ioctl+0x8a/0xb0 [ 761.993281] do_syscall_64+0x38/0x90 [ 761.993285] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 761.993287] RIP: 0033:0x7f81e551aaff [ 761.993288] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 761.993290] RSP: 002b:00007fff4304af10 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 761.993292] RAX: ffffffffffffffda RBX: 00007fff4304afa0 RCX: 00007f81e551aaff [ 761.993293] RDX: 00007fff4304afa0 RSI: 00000000c06864a2 RDI: 0000000000000004 [ 761.993294] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 0000555dac8a9c68 [ 761.993294] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000008c4 [ 761.993295] R13: 0000000000000004 R14: 0000555dac8a9c68 R15: 00007fff4304b098 [ 761.993301] </TASK> Fixes: 083351e9 ("drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()") Testcase: igt@testdisplay Cc: Lyude Paul <lyude@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907142542.1681994-1-imre.deak@intel.com
-
Chen-Yu Tsai authored
This panel has the same delay timing as N116BCA-EA1 from the same company, which is also the same as delay_200_500_e80_d50. Add an entry for it. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Maxime Ripard authored
Our mode_set implementation can be merged into our atomic_enable implementation to simplify things, so let's do this. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
The simple display pipeline is a set of helpers that can be used by DRM drivers to avoid dealing with all the needed components and just define a few functions to operate a simple display device with one full-screen scanout buffer feeding a single output. But it is arguable that this provides the correct level of abstraction for simple drivers, and recently some have been ported from using these simple display helpers to use the regular atomic helpers instead. The rationale for this is that the simple display pipeline helpers don't hide that much of the DRM complexity, while adding an indirection layer that conflates the concepts of CRTCs and planes. This makes the helpers less flexible and harder to be reused among different graphics drivers. Also, for simple drivers, using the full atomic helpers doesn't require a lot of additional code. So adding a simple display pipeline layer may not be worth it. For these reasons, let's follow that trend and make ssd130x a plain DRM driver that creates its own primary plane, CRTC, enconder and connector. Suggested-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
- 07 Sep, 2022 15 commits
-
-
Jilin Yuan authored
Delete the redundant word 'for'. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907113927.35305-1-yuanjilin@cdjrlc.com
-
Zongmin Zhou authored
Details: Currently, when trying to suspend and resume with qxl device， there are some error messages after resuming, eventually caused to black screen and can't be recovered. The first error message: [ 64.668577][ C3] [drm] driver is in bug mode This error is due to guest qxl driver will call qxl_reinit_memslots(qdev) during system resume, but didn't call qxl_io_reset(qdev) before this, Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU, qxl->guest_bug flag will be set，As a result, the QXL device can't communicate with guest qxl driver through the IO port. after fix the first error,can success to resume and login to desktop, but shortly after that will observe the second error message : [ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001) [ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12) [ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12 [ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001) [ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring) in qxl_drm_resume() function. When do QXL_IO_RESET,QEMU will call init_qxl_ram(), so params like prod,cons,notify_on_cons and notify_on_prod will be set to default value. Ring push/pop actions for release_ring can be performed normally. But call qxl_ring_init_hdr(qdev->release_ring) will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE, affect the value of notify in qxl_push_free_res() function always be false, QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the guest qxl driver，so qxl_ring_pop() will never been called anymore， and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx) always return EBUSY,fail to call qxl_bo_create(). Test scenario: 1) start virtual machine with qemu command "-device qxl-vga" 2) click suspend botton to enter suspend mode 3) resume and observe the error message in kernel logs,screen will be black Let's fix this by reset io and remove the qxl_ring_init_hdr calling. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Suggested-by: Ming Xie<xieming@kylinos.cn> Link: http://patchwork.freedesktop.org/patch/msgid/20220907094423.93581-1-min_halo@163.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the vga device is actually in color mode and set the corresponding bit in the misc register. Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2 fix is on the way too). Doesn't happen in BIOS mode because in that case the vgabios already flips the bit. Fixes: 250e7439 ("drm/bochs: Add screen blanking support") Signed-off-by:
-
Chia-I Wu authored
Without this, the drm core advertises LINEAR modifier which is incorrect. Also userspace virgl does not support modifiers. For example, it causes chrome on ozone/drm to fail with "Failed to create scanout buffer". Fixes: 2af10429 ("drm: introduce fb_modifiers_not_supported flag in mode_config") Suggested-by:
Shao-Chuan Lee <shaochuan@chromium.org> Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.comSigned-off-by:
-
Maxime Ripard authored
The reset line is deasserted at bind, and asserted if we ever encounter an error there. However, it's never asserted in unbind which will lead to a resource unbalance. Reviewed-by:
-
Maxime Ripard authored
The other error labels in sun4i_tv_bind() are named after the task they perform (err_disable_clk to call clk_disable_unprepare for example). However, the err_cleanup_connector is named after the calling site (drm_connector_init failing) and will actually cleanup the encoder. Let's rename it to err_cleanup_encoder to be consistent. Reviewed-by:
-
Maxime Ripard authored
Our destroy implementation is just calling the generic helper, so let's just remove our function and directly use the helper. Reviewed-by:
-
Maxime Ripard authored
The drm_connector_to_sun4i_tv() function isn't used anywhere in the driver, so let's remove it. Acked-by:
-
Maxime Ripard authored
The sun4i TV driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Acked-by:
-
Maxime Ripard authored
The mode_valid implementation is pretty much a nop, let's remove it. Reviewed-by:
-
Mateusz Kwiatkowski authored
This commit fixes vertical timings of the VEC (composite output) modes to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R standards. Previous timings were actually defined as 502 and 601 lines, resulting in non-standard 62.69 Hz and 52 Hz signals being generated, respectively. Signed-off-by:Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Mateusz Kwiatkowski authored
Let's remove the superfluous tv_mode field, which was redundant with the mode field in struct drm_tv_connector_state. Signed-off-by:
-
Mateusz Kwiatkowski authored
Change the mode_set function pointer logic to declarative config0, config1 and custom_freq fields, to make TV mode setting logic more concise and uniform. Signed-off-by:
-
Maxime Ripard authored
The VC4 VEC driver still uses legacy enable and disable hook implementation. Let's convert to the atomic variants. Reviewed-by:
-
Maxime Ripard authored
The mode_fixup hooks are deprecated, and the behaviour we implement is the default one anyway. Let's remove it. Reviewed-by:
-
