- 14 May, 2020 40 commits
-
-
Jiri Slaby authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit e78c38f6 upstream. In commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op should be considered as shift and the shift is out of range (< 0 or > 31). But strace's test suite does this madness: futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff); When I pick the first 0xa0caffee, it decodes as: 0x80000000 & 0xa0caffee: oparg is shift 0x70000000 & 0xa0caffee: op is FUTEX_OP_OR 0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ 0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849 0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18 That means the op tries to do this: (futex |= (1 << (-849))) == -18 which is completely bogus. The new check of op in the code is: if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { if (oparg < 0 || oparg > 31) return -EINVAL; oparg = 1 << oparg; } which results obviously in the "Invalid argument" errno: FAIL: futex =========== futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument futex.test: failed test: ../futex failed with code 1 So let us soften the failure to print only a (ratelimited) message, crop the value and continue as if it were right. When userspace keeps up, we can switch this to return -EINVAL again. [v2] Do not return 0 immediatelly, proceed with the cropped value. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Rosioru Dragos authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit fa03481b upstream. The incorrect traversal of the scatterlist, during the linearization phase lead to computing the hash value of the wrong input buffer. New implementation uses scatterwalk_map_and_copy() to address this issue. Cc: <stable@vger.kernel.org> Fixes: 15b59e7c ("crypto: mxs - Add Freescale MXS DCP driver") Signed-off-by:
Rosioru Dragos <dragos.rosioru@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit edd4fa37 upstream. Reallocate a rmap array and recalcuate large page compatibility when moving an existing memslot to correctly handle the alignment properties of the new memslot. The number of rmap entries required at each level is dependent on the alignment of the memslot's base gfn with respect to that level, e.g. moving a large-page aligned memslot so that it becomes unaligned will increase the number of rmap entries needed at the now unaligned level. Not updating the rmap array is the most obvious bug, as KVM accesses garbage data beyond the end of the rmap. KVM interprets the bad data as pointers, leading to non-canonical #GPs, unexpected #PFs, etc... general protection fault: 0000 [#1] SMP CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:rmap_get_first+0x37/0x50 [kvm] Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3 RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246 RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012 RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570 RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8 R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000 R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8 FS: 00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0 Call Trace: kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm] __kvm_set_memory_region.part.64+0x559/0x960 [kvm] kvm_set_memory_region+0x45/0x60 [kvm] kvm_vm_ioctl+0x30f/0x920 [kvm] do_vfs_ioctl+0xa1/0x620 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x170 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f7ed9911f47 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47 RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004 RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700 R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000 R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000 Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0c5f570b3358ca89 ]--- The disallow_lpage tracking is more subtle. Failure to update results in KVM creating large pages when it shouldn't, either due to stale data or again due to indexing beyond the end of the metadata arrays, which can lead to memory corruption and/or leaking data to guest/userspace. Note, the arrays for the old memslot are freed by the unconditional call to kvm_free_memslot() in __kvm_set_memory_region(). Fixes: 05da4558 ("KVM: MMU: large page support") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3d51507f upstream. All exception entry points must have ASM_CLAC right at the beginning. The general_protection entry is missing one. Fixes: e59d1b0a ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Frederic Weisbecker <frederic@kernel.org> Reviewed-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.deSigned-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit d1e7fd64 upstream. Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Remi Pommarel authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 968ae2ca upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd119 ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 792a402c upstream. There is a potential NULL pointer dereference in case kzalloc() fails and returns NULL. Fix this by adding a NULL check on *cd* This bug was detected with the help of Coccinelle. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Sungbo Eo authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 6a214a28 upstream. Clear its own IRQs before the parent IRQ get enabled, so that the remaining IRQs do not accidentally interrupt the parent IRQ controller. This patch also fixes a reboot bug on OX820 SoC, where the remaining rps-timer IRQ raises a GIC interrupt that is left pending. After that, the rps-timer IRQ is cleared during driver initialization, and there's no IRQ left in rps-irq when local_irq_enable() is called, which evokes an error message "unexpected IRQ trap". Fixes: bdd272cb ("irqchip: versatile FPGA: support cascaded interrupts from DT") Signed-off-by:
Sungbo Eo <mans0n@gorani.run> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.runSigned-off-by:
-
Martin Blumenstingl authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3f5b9959 upstream. When CONFIG_DEVFREQ_THERMAL is disabled all functions except of_devfreq_cooling_register_power() were already inlined. Also inline the last function to avoid compile errors when multiple drivers call of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not set. Compilation failed with the following message: multiple definition of `of_devfreq_cooling_register_power' (which then lists all usages of of_devfreq_cooling_register_power()) Thomas Zimmermann reported this problem [0] on a kernel config with CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers gained devfreq cooling support. [0] https://www.spinics.net/lists/dri-devel/msg252825.html Fixes: a76caf55 ("thermal: Add devfreq cooling") Cc: stable@vger.kernel.org Reported-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Jan Engelhardt authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit ecb9c790 upstream. The value in "new" is constructed from "old" such that all bits defined as reserved by the ACPI spec[1] are left untouched. But if those bits do not happen to be all zero, "new < 3" will not evaluate to true. The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with garbage inside the "FACS" ACPI table. The starting value is old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off the reserved bits. [1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit ae769d35 upstream. The recent fix for the OOB access in PCM OSS plugins (commit f2ecf903: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a regression on OSS applications. The patch introduced the size check in client and slave size calculations to limit to each plugin's buffer size, but I overlooked that some code paths call those without allocating the buffer but just for estimation. This patch fixes the bug by skipping the size check for those code paths while keeping checking in the actual transfer calls. Fixes: f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow") Tested-and-reported-by:
Jari Ruusu <jari.ruusu@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit c47914c0 upstream. The access to Analog Capture Source control value implemented in prodigy_hifi.c is wrong, as caught by the recently introduced sanity check; it should be accessing value.enumerated.item[] instead of value.integer.value[]. This patch corrects the wrong access pattern. Fixes: 6b8d6e55 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 0ad3f0b3 upstream. The beep control helper function blindly stores the values in two stereo channels no matter whether the actual control is mono or stereo. This is practically harmless, but it annoys the recently introduced sanity check, resulting in an error when the checker is enabled. This patch corrects the behavior to store only on the defined array member. Fixes: 0401e854 ("ALSA: hda - Move beep helper functions to hda_beep.c") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139Reviewed-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3c6fd1f0 upstream. The recent AMD platform exposes an HD-audio bus but without any actual codecs, which is internally tied with a USB-audio device, supposedly. It results in "no codecs" error of HD-audio bus driver, and it's nothing but a waste of resources. This patch introduces a static blacklist table for skipping such a known bogus PCI SSID entry. As of writing this patch, the known SSIDs are: * 1043:874f - ASUS ROG Zenith II / Strix * 1462:cb59 - MSI TRX40 Creator * 1462:cb60 - MSI TRX40 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 2a48218f upstream. Some recent boards (supposedly with a new AMD platform) contain the USB audio class 2 device that is often tied with HD-audio. The device exposes an Input Gain Pad control (id=19, control=12) but this node doesn't behave correctly, returning an error for each inquiry of GET_MIN and GET_MAX that should have been mandatory. As a workaround, simply ignore this node by adding a usbmix_name_map table entry. The currently known devices are: * 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi * 0b05:1916 - ASUS ROG Zenith II * 0b05:1917 - ASUS ROG Strix * 0db0:0d64 - MSI TRX40 Creator * 0db0:543d - MSI TRX40 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.deSigned-off-by:
-
Thinh Nguyen authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 5e5caf4f upstream. Different configuration/condition may draw different power. Inform the controller driver of the change so it can respond properly (e.g. GET_STATUS request). This fixes an issue with setting MaxPower from configfs. The composite driver doesn't check this value when setting self-powered. Cc: stable@vger.kernel.org Fixes: 88af8bbe ("usb: gadget: the start of the configfs interface") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sriharsha Allenki authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit f63ec55f upstream. In AIO case, the request is freed up if ep_queue fails. However, io_data->req still has the reference to this freed request. In the case of this failure if there is aio_cancel call on this io_data it will lead to an invalid dequeue operation and a potential use after free issue. Fix this by setting the io_data->req to NULL when the request is freed as part of queue failure. Fixes: 2e4c7553 ("usb: gadget: f_fs: add aio support") Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> CC: stable <stable@vger.kernel.org> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.orgSigned-off-by:
-
이경택 authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit abca9e4a upstream. Current topology doesn't add prefix of component to new kcontrol. Signed-off-by:
Gyeongtaek Lee <gt82.lee@samsung.com> Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
이경택 authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 21fca8bd upstream. soc_compr_trigger_fe() allows start or stop after pause_push. In dpcm_be_dai_trigger(), however, only pause_release is allowed command after pause_push. So, start or stop after pause in compress offload is always returned as error if the compress offload is used with dpcm. To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed for start or stop command. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.comSigned-off-by:
-
이경택 authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3bbbb772 upstream. Since a virtual mixer has no backing registers to decide which path to connect, it will try to match with initial state. This is to ensure that the default mixer choice will be correctly powered up during initialization. Invert flag is used to select initial state of the virtual switch. Since actual hardware can't be disconnected by virtual switch, connected is better choice as initial state in many cases. Signed-off-by:
-
이경택 authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 0ab07091 upstream. If regwshift is 32 and the selected architecture compiles '<<' operator for signed int literal into rotating shift, '1<<regwshift' became 1 and it makes regwmask to 0x0. The literal is set to unsigned long to get intended regwmask. Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 10cea23b ] rts522a should use rts522a_pcr_ops, which is diffrent with rts5227 in phy/hw init setting. Fixes: ce6a5acc ("mfd: rtsx: Add support for rts522A") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit ea287ab1 ] We always search the commit root of the extent tree for looking up back references, however we track the reloc roots based on their current bytenr. This is wrong, if we commit the transaction between relocating tree blocks we could end up in this code in build_backref_tree if (key.objectid == key.offset) { /* * Only root blocks of reloc trees use backref * pointing to itself. */ root = find_reloc_root(rc, cur->bytenr); ASSERT(root); cur->root = root; break; } find_reloc_root() is looking based on the bytenr we had in the commit root, but if we've COWed this reloc root we will not find that bytenr, and we will trip over the ASSERT(root). Fix this by using the commit_root->start bytenr for indexing the commit root. Then we change the __update_reloc_root() caller to be used when we switch the commit root for the reloc root during commit. This fixes the panic I was seeing when we started throttling relocation for delayed refs. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 7b7b7431 ] This was pretty subtle, we default to reloc roots having 0 root refs, so if we crash in the middle of the relocation they can just be deleted. If we successfully complete the relocation operations we'll set our root refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots(). At prepare_to_merge() time if any of the reloc roots have a 0 reference still, we will remove that reloc root from our reloc root rb tree, and then clean it up later. However this only happens if we successfully start a transaction. If we've aborted previously we will skip this step completely, and only have reloc roots with a reference count of 0, but were never properly removed from the reloc control's rb tree. This isn't a problem per-se, our references are held by the list the reloc roots are on, and by the original root the reloc root belongs to. If we end up in this situation all the reloc roots will be added to the dirty_reloc_list, and then properly dropped at that point. The reloc control will be free'd and the rb tree is no longer used. There were two options when fixing this, one was to remove the BUG_ON(), the other was to make prepare_to_merge() handle the case where we couldn't start a trans handle. IMO this is the cleaner solution. I started with handling the error in prepare_to_merge(), but it turned out super ugly. And in the end this BUG_ON() simply doesn't matter, the cleanup was happening properly, we were just panicing because this BUG_ON() only matters in the success case. So I've opted to just remove it and add a comment where it was. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Boqun Feng authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 25016bd7 ] Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep triggered a warning: [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) ... [ ] Call Trace: [ ] lock_is_held_type+0x5d/0x150 [ ] ? rcu_lockdep_current_cpu_online+0x64/0x80 [ ] rcu_read_lock_any_held+0xac/0x100 [ ] ? rcu_read_lock_held+0xc0/0xc0 [ ] ? __slab_free+0x421/0x540 [ ] ? kasan_kmalloc+0x9/0x10 [ ] ? __kmalloc_node+0x1d7/0x320 [ ] ? kvmalloc_node+0x6f/0x80 [ ] __bfs+0x28a/0x3c0 [ ] ? class_equal+0x30/0x30 [ ] lockdep_count_forward_deps+0x11a/0x1a0 The warning got triggered because lockdep_count_forward_deps() call __bfs() without current->lockdep_recursion being set, as a result a lockdep internal function (__bfs()) is checked by lockdep, which is unexpected, and the inconsistency between the irq-off state and the state traced by lockdep caused the warning. Apart from this warning, lockdep internal functions like __bfs() should always be protected by current->lockdep_recursion to avoid potential deadlocks and data inconsistency, therefore add the current->lockdep_recursion on-and-off section to protect __bfs() in both lockdep_count_forward_deps() and lockdep_count_backward_deps() Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.comSigned-off-by:
-
Arvind Sankar authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 81a34892 ] The load address is compared with LOAD_PHYSICAL_ADDR using a signed comparison currently (using jge instruction). When loading a 64-bit kernel using the new efi32_pe_entry() point added by: 97aa2765 ("efi/x86: Add true mixed mode entry point into .compat section") using Qemu with -m 3072, the firmware actually loads us above 2Gb, resulting in a very early crash. Use the JAE instruction to perform a unsigned comparison instead, as physical addresses should be considered unsigned. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.orgSigned-off-by:
-
Bob Peterson authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit df5db5f9 ] Before this patch, run_queue would demote glocks based on whether there are any more holders. But if the glock has pending revokes that haven't been written to the media, giving up the glock might end in file system corruption if the revokes never get written due to io errors, node crashes and fences, etc. In that case, another node will replay the metadata blocks associated with the glock, but because the revoke was never written, it could replay that block even though the glock had since been granted to another node who might have made changes. This patch changes the logic in run_queue so that it never demotes a glock until its count of pending revokes reaches zero. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Reviewed-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
John Garry authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 1d72f7ae ] If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails, then we may get use-after-free KASAN warns: ================================================================== BUG: KASAN: use-after-free in kobject_put+0x24/0x180 Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc3-00004-g5a71b206ea82-dirty #1765 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020 Call trace: dump_backtrace+0x0/0x298 show_stack+0x14/0x20 dump_stack+0x118/0x190 print_address_description.isra.9+0x6c/0x3b8 __kasan_report+0x134/0x23c kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 kobject_put+0x24/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_devres_release+0x74/0xb0 release_nodes+0x2d0/0x470 devres_release_all+0x50/0x78 really_probe+0x2d4/0x560 driver_probe_device+0x7c/0x148 device_driver_attach+0x94/0xa0 __driver_attach+0xa8/0x110 bus_for_each_dev+0xe8/0x158 driver_attach+0x30/0x40 bus_add_driver+0x220/0x2e0 driver_register+0xbc/0x1d0 __pci_register_driver+0xbc/0xd0 ahci_pci_driver_init+0x20/0x28 do_one_initcall+0xf0/0x608 kernel_init_freeable+0x31c/0x384 kernel_init+0x10/0x118 ret_from_fork+0x10/0x18 Allocated by task 5: save_stack+0x28/0xc8 __kasan_kmalloc.isra.8+0xbc/0xd8 kasan_kmalloc+0xc/0x18 __kmalloc+0x1a8/0x280 scsi_host_alloc+0x44/0x678 ata_scsi_add_hosts+0x74/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 Freed by task 5: save_stack+0x28/0xc8 __kasan_slab_free+0x118/0x180 kasan_slab_free+0x10/0x18 slab_free_freelist_hook+0xa4/0x1a0 kfree+0xd4/0x3a0 scsi_host_dev_release+0x100/0x148 device_release+0x7c/0xe0 kobject_put+0xb0/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_scsi_add_hosts+0x210/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 There is also refcount issue, as well: WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170 The issue is that we make an erroneous extra call to scsi_host_put() for that host: So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup a device release method - ata_devres_release() - which intends to release the SCSI hosts: static void ata_devres_release(struct device *gendev, void *res) { ... for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; if (!ap) continue; if (ap->scsi_host) scsi_host_put(ap->scsi_host); } ... } However in the ata_scsi_add_hosts() error path, we also call scsi_host_put() for the SCSI hosts. Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and leave this to ata_devres_release(). Fixes: f3187195 ("libata: separate out ata_host_alloc() and ata_host_register()") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 630b99ab ] If AT_SYSINFO is not present, don't try to call a NULL pointer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.orgSigned-off-by:
-
Sungbo Eo authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 486562da ] Enclose the chained handler with chained_irq_{enter,exit}(), so that the muxed interrupts get properly acked. This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer interrupt is never acked. The kernel waits a clock tick forever in calibrate_delay_converge(), which leads to a boot hang. Fixes: c41b16f8 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code") Signed-off-by:
-
Alain Volmat authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit f491c668 ] Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by:
Alain Volmat <avolmat@me.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Xu Wang authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit bcaeb886 ] In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Zheng Wei authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit b317538c ] printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix, it causes a build error when there is no variable arguments(e.g. only fmt is specified.). Signed-off-by:
Zheng Wei <wei.zheng@vivo.com> Signed-off-by:
-
Ondrej Jirman authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit a43ab30d ] When doing a 16-bit read that returns data in the MSB byte, the RSB_DATA register will keep the MSB byte unchanged when doing the following 8-bit read. sunxi_rsb_read() will then return a result that contains high byte from 16-bit read mixed with the 8-bit result. The consequence is that after this happens the PMIC's regmap will look like this: (0x33 is the high byte from the 16-bit read) % cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers 00: 33 01: 33 02: 33 03: 33 04: 33 05: 33 06: 33 07: 33 08: 33 09: 33 0a: 33 0b: 33 0c: 33 0d: 33 0e: 33 [snip] Fix this by masking the result of the read with the correct mask based on the size of the read. There are no 16-bit users in the mainline kernel, so this doesn't need to get into the stable tree. Signed-off-by:
Ondrej Jirman <megous@megous.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Po-Hsu Lin authored
BugLink: https://bugs.launchpad.net/bugs/1812176 The psock_tpacket test will need to access /proc/kallsyms, this would require the kernel config CONFIG_KALLSYMS to be enabled first. Apart from adding CONFIG_KALLSYMS to the net/config file here, check the file existence to determine if we can run this test will be helpful to avoid a false-positive test result when testing it directly with the following commad against a kernel that have CONFIG_KALLSYMS disabled: make -C tools/testing/selftests TARGETS=net run_tests Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1876982 ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
Sultan Alsawaf <sultan.alsawaf@canonical.com> Acked-by:
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1876982 This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by:
-
Eugenia Emantayev authored
BugLink: https://bugs.launchpad.net/bugs/1874444 Add a sanity check to ensure that all requested ring parameters are within bounds, which should reduce errors in driver implementation. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Daniel Vacek authored
BugLink: https://bugs.launchpad.net/bugs/1877858 The threshold in tsc_read_refs() is constant which may favor slower CPUs but may not be optimal for simple reading of reference on faster ones. Hence make it proportional to tsc_khz when available to compensate for this. The threshold guards against any disturbance like IRQs, NMIs, SMIs or CPU stealing by host on guest systems so rename it accordingly and fix comments as well. Also on some systems there is noticeable DMI bus contention at some point during boot keeping the readout failing (observed with about one in ~300 boots when testing). In that case retry also the second readout instead of simply bailing out unrefined. Usually the next second the readout returns fast just fine without any issues. Signed-off-by:
Daniel Vacek <neelx@redhat.com> Signed-off-by:
-
Alan Maguire authored
BugLink: https://bugs.launchpad.net/bugs/1877958 Currently, ftracetest will return 1 (failure) if any unresolved cases are encountered. The unresolved status results from modules and programs not being available, and as such does not indicate any issues with ftrace itself. As such, change the behaviour of ftracetest in line with unsupported cases; if unsupported cases happen, ftracetest still returns 0 unless --fail-unsupported. Here --fail-unresolved is added and the default is to return 0 if unresolved results occur. Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
