- 04 Feb, 2013 14 commits
-
-
Jeff Layton authored
There's no need to keep entries around that we're declaring RC_NOCACHE. Ditto if there's a problem with the entry. With this change too, there's no need to test for RC_UNUSED in the search function. If the entry's in the hash table then it's either INPROG or DONE. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
With the change to dynamically allocate entries, the cache is never disabled on the fly. Remove this flag. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
The existing code keeps a fixed-size cache of 1024 entries. This is much too small for a busy server, and wastes memory on an idle one. This patch changes the code to dynamically allocate and free these cache entries. A cap on the number of entries is retained, but it's much larger than the existing value and now scales with the amount of low memory in the machine. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
...otherwise, we end up with the list ordering wrong. Currently, it's not a problem since we skip RC_INPROG entries, but keeping the ordering strict will be necessary for a later patch that adds a cache cleaner. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
commit 885c91f7 in Bruce's tree was causing oopses for me: general protection fault: 0000 [#1] SMP Modules linked in: nfsd(OF) nfs_acl(OF) auth_rpcgss(OF) lockd(OF) sunrpc(OF) kvm_amd kvm microcode i2c_piix4 virtio_net virtio_balloon cirrus drm_kms_helper ttm drm virtio_blk i2c_core CPU 0 Pid: 564, comm: exportfs Tainted: GF O 3.8.0-0.rc5.git2.1.fc19.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffff811b1509>] [<ffffffff811b1509>] kfree+0x49/0x280 RSP: 0018:ffff88007a3d7c50 EFLAGS: 00010203 RAX: 01adaf8dadadad80 RBX: 6b6b6b6b6b6b6b6b RCX: 0000000000000001 RDX: ffffffff7fffffff RSI: 0000000000000000 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88007a3d7c80 R08: 6b6b6b6b6b6b6b6b R09: 0000000000000000 R10: 0000000000000018 R11: 0000000000000000 R12: ffff88006a117b50 R13: ffffffffa01a589c R14: ffff8800631b0f50 R15: 01ad998dadadad80 FS: 00007fcaa3616740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f5d84b6fdd8 CR3: 0000000064db4000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process exportfs (pid: 564, threadinfo ffff88007a3d6000, task ffff88006af28000) Stack: ffff88007a3d7c80 ffff88006a117b68 ffff88006a117b50 0000000000000000 ffff8800631b0f50 ffff88006a117b50 ffff88007a3d7ca0 ffffffffa01a589c ffff880036be1148 ffff88007a3d7cf8 ffff88007a3d7e28 ffffffffa01a6a98 Call Trace: [<ffffffffa01a589c>] svc_export_put+0x5c/0x70 [nfsd] [<ffffffffa01a6a98>] svc_export_parse+0x328/0x7e0 [nfsd] [<ffffffffa016f1c7>] cache_do_downcall+0x57/0x70 [sunrpc] [<ffffffffa016f25e>] cache_downcall+0x7e/0x100 [sunrpc] [<ffffffffa016f338>] cache_write_procfs+0x58/0x90 [sunrpc] [<ffffffffa016f2e0>] ? cache_downcall+0x100/0x100 [sunrpc] [<ffffffff8123b0e5>] proc_reg_write+0x75/0xb0 [<ffffffff811ccecf>] vfs_write+0x9f/0x170 [<ffffffff811cd089>] sys_write+0x49/0xa0 [<ffffffff816e0919>] system_call_fastpath+0x16/0x1b Code: 66 66 66 90 48 83 fb 10 0f 86 c3 00 00 00 48 89 df 49 bf 00 00 00 00 00 ea ff ff e8 f2 12 ea ff 48 c1 e8 0c 48 c1 e0 06 49 01 c7 <49> 8b 07 f6 c4 80 0f 85 1d 02 00 00 49 8b 07 a8 80 0f 84 ee 01 RIP [<ffffffff811b1509>] kfree+0x49/0x280 RSP <ffff88007a3d7c50> I think Majianpeng's patch is correct, but incomplete. In order for it to be safe to free the ex_uuid unconditionally in svc_export_put, we need to make sure it's initialized to NULL in the init routine. Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Later, we'll need more than one call site for this, so break it out into a new function. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Add a preprocessor constant for the expiry time of cache entries, and move the test for an expired entry into a function. Note that the current code does not test for RC_INPROG. It just assumes that it won't take more than 2 minutes to fill out an in-progress entry. I'm not sure how valid that assumption is though, so let's just ensure that we never consider an RC_INPROG entry to be expired. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Entries can only get a c_type of RC_REPLBUFF iff they are RC_DONE. Therefore the test for RC_DONE isn't necessary here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Currently we use kmalloc() which wastes a little bit of memory on each allocation since it's a power of 2 allocator. Since we're allocating a 1024 of these now, and may need even more later, let's create a new slabcache for them. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
The reply cache code never returns this status. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
The locking rules for cache entries say that locking the cache_lock isn't needed if you're just touching the current entry. Earlier in this function we set rp->c_state to RC_UNUSED without any locking, so I believe it's ok to do the same here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Jeff Layton authored
Currently, it only stores the first 16 bytes of any address. struct sockaddr_in6 is 28 bytes however, so we're currently ignoring the last 12 bytes of the address. Expand the c_addr field to a sockaddr_in6, and cast it to a sockaddr_in as necessary. Also fix the comparitor to use the existing RPC helpers for this. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
- 29 Jan, 2013 1 commit
-
-
majianpeng authored
In func svc_export_parse, the uuid which used kmemdup to alloc will be changed in func export_update.So the later kfree don't free this memory. And it can't be free in func svc_export_parse because other place still used.So put this operation in func svc_export_put. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
- 23 Jan, 2013 8 commits
-
-
J. Bruce Fields authored
The current code will allow silly things like: echo "+2 +3 +4 +7.1">/proc/fs/nfsd/versions Reported-by: Fan Chaoting <fanchaoting@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Stanislav Kinsbursky authored
If CONFIG_LOCKDEP is disabled, then there would be a warning like this: CC [M] fs/nfsd/nfs4state.o fs/nfsd/nfs4state.c: In function ‘free_client’: fs/nfsd/nfs4state.c:1051:19: warning: unused variable ‘nn’ [-Wunused-variable] So, let's add "maybe_unused" tag to this variable. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Andriy Skulysh authored
There is a race in enqueueing thread to a pool and waking up a thread. lockd doesn't wake up on reception of lock granted callback if svc_wake_up() is called before lockd's thread is added to a pool. Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
J. Bruce Fields authored
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Yanchuan Nian authored
The write function doesn't be implemented in file content, and it's meaningless to write data into this file directly. Remove write permission from it. Signed-off-by: Yanchuan Nian <ycnian@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Yanchuan Nian authored
In the procedure of CREATE_SESSION, the state is locked after alloc_conn_from_crses(). If the allocation fails, the function goes to "out_free_session", and then "out" where there is an unlock function. Signed-off-by: Yanchuan Nian <ycnian@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
Yanchuan Nian authored
In alloc_session(), numslots is the correct slot number used by the session. But the slot number passed to nfsd4_put_drc_mem() is the one from nfs client. Signed-off-by: Yanchuan Nian <ycnian@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
J. Bruce Fields authored
It seems slightly simpler to make nfsd4_encode_fattr rather than its callers responsible for advancing the write pointer on success. (Also: the count == 0 check in the verify case looks superfluous. Running out of buffer space is really the only reason fattr encoding should fail with eresource.) Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-
- 03 Jan, 2013 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-ledsLinus Torvalds authored
Pull LED fix from Bryan Wu. * 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-gpio: set devm_gpio_request_one() flags param correctly
-
Javier Martinez Canillas authored
commit a99d76f9 leds: leds-gpio: use gpio_request_one changed the leds-gpio driver to use gpio_request_one() instead of gpio_request() + gpio_direction_output() Unfortunately, it also made a semantic change that breaks the leds-gpio driver. The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | (led_dat->active_low ^ state) Since GPIOF_DIR_OUT is 0, the final flags value will just be the XOR'ed value of led_dat->active_low and state. This value were used to distinguish between HIGH/LOW output initial level and call gpio_direction_output() accordingly. With this new semantic gpio_request_one() will take the flags value of 1 as a configuration of input direction (GPIOF_DIR_IN) and will call gpio_direction_input() instead of gpio_direction_output(). int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { .. if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else err = gpio_direction_output(gpio, (flags & GPIOF_INIT_HIGH) ? 1 : 0); .. } The right semantic is to evaluate led_dat->active_low ^ state and set the output initial level explicitly. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reported-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: "This fixes some small errors in the new da9055 driver, eliminates a compiler warning and adds DT support for the twl4030_wdt driver (so that we can have multiple watchdogs with DT on the omap platforms)." * git://www.linux-watchdog.org/linux-watchdog: watchdog: twl4030_wdt: add DT support watchdog: omap_wdt: eliminate unused variable and a compiler warning watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path watchdog: da9055: Fix invalid free of devm_ allocated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Some fixes for v3.8. They include a fix for the new SR-IOV sysfs management support, an expanded quirk for Ricoh SD card readers, a Stratus DMI quirk fix, and a PME polling fix." * tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz PCI/PM: Do not suspend port if any subordinate device needs PME polling PCI: Add PCIe Link Capability link speed and width names PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) PCI: Remove spurious error for sriov_numvfs store and simplify flow
-
David Howells authored
Commit 56c176c9 ("UAPI: strip the _UAPI prefix from header guards during header installation") strips the _UAPI prefix from header guards, but only if there's a single space between the cpp directive and the label. Make it more flexible and able to handle tabs and multiple white space characters. Signed-off-by: David Howells <dhowell@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Empty files can get deleted by the patch program, so remove empty Kbuild files and their links from the parent Kbuilds. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two self-explanatory fixes and a third patch which improves performance: when overwriting a full page in the eCryptfs page cache, skip reading in and decrypting the corresponding lower page." * tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: fs/ecryptfs/crypto.c: make ecryptfs_encode_for_filename() static eCryptfs: fix to use list_for_each_entry_safe() when delete items eCryptfs: Avoid unnecessary disk read and data decryption during writing
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "Two of Alex's patches deal with a race when reseting server connections for open RBD images, one demotes some non-fatal BUGs to WARNs, and my patch fixes a protocol feature bit failure path." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix protocol feature mismatch failure path libceph: WARN, don't BUG on unexpected connection states libceph: always reset osds when kicking libceph: move linger requests sooner in kick_requests()
-
Mel Gorman authored
Sasha was fuzzing with trinity and reported the following problem: BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 1, irqs_disabled(): 0, pid: 6361, name: trinity-main 2 locks held by trinity-main/6361: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff810aa314>] __do_page_fault+0x1e4/0x4f0 #1: (&(&mm->page_table_lock)->rlock){+.+...}, at: [<ffffffff8122f017>] handle_pte_fault+0x3f7/0x6a0 Pid: 6361, comm: trinity-main Tainted: G W 3.7.0-rc2-next-20121024-sasha-00001-gd95ef01-dirty #74 Call Trace: __might_sleep+0x1c3/0x1e0 mutex_lock_nested+0x29/0x50 mpol_shared_policy_lookup+0x2e/0x90 shmem_get_policy+0x2e/0x30 get_vma_policy+0x5a/0xa0 mpol_misplaced+0x41/0x1d0 handle_pte_fault+0x465/0x6a0 This was triggered by a different version of automatic NUMA balancing but in theory the current version is vunerable to the same problem. do_numa_page -> numa_migrate_prep -> mpol_misplaced -> get_vma_policy -> shmem_get_policy It's very unlikely this will happen as shared pages are not marked pte_numa -- see the page_mapcount() check in change_pte_range() -- but it is possible. To address this, this patch restores sp->lock as originally implemented by Kosaki Motohiro. In the path where get_vma_policy() is called, it should not be calling sp_alloc() so it is not necessary to treat the PTL specially. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Jan, 2013 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Various bug fixes for ext4. Perhaps the most serious bug fixed is one which could cause file system corruptions when performing file punch operations." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid hang when mounting non-journal filesystems with orphan list ext4: lock i_mutex when truncating orphan inodes ext4: do not try to write superblock on ro remount w/o journal ext4: include journal blocks in df overhead calcs ext4: remove unaligned AIO warning printk ext4: fix an incorrect comment about i_mutex ext4: fix deadlock in journal_unmap_buffer() ext4: split off ext4_journalled_invalidatepage() jbd2: fix assertion failure in jbd2_journal_flush() ext4: check dioread_nolock on remount ext4: fix extent tree corruption caused by hole punch
-
Hugh Dickins authored
Remove the unused argument (formerly no_context) from mpol_parse_str() and from mpol_to_str(). Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA mempolicy testing. Very nasty. Reading /proc/mounts, /proc/pid/mounts or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often in a page table (causing "Bad swap" or "Bad page map" warning or "Bad pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere worse. "mpol=prefer" and "mpol=prefer:Node" are equally toxic. Recent NUMA enhancements are not to blame: this dates back to 2.6.35, when commit e17f74af "mempolicy: don't call mpol_set_nodemask() when no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(), which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags. With slab poisoning, you can then rely on mpol_to_str() to set the bit for node 0x6b6b, probably in the next page above the caller's stack. mpol_parse_str() is only called from shmem_parse_options(): no_context is always true, so call it unused for now, and remove !no_context code. Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might expect. Then mpol_to_str() can ignore its no_context argument also, the mpol being appropriately initialized whether contextualized or not. Rename its no_context unused too, and let subsequent patch remove them (that's not needed for stable backporting, which would involve rejects). I don't understand why MPOL_LOCAL is described as a pseudo-policy: it's a reasonable policy which suffers from a confusing implementation in terms of MPOL_PREFERRED with MPOL_F_LOCAL. I believe this would be much more robust if MPOL_LOCAL were recognized in switch statements throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly empty) nodes mask like everyone else, instead of its preferred_node variant (I presume an optimization from the days before MPOL_LOCAL). But that would take me too long to get right and fully tested. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Wong authored
EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to ensure events are not missed. Since the modifications to the interest mask are not protected by the same lock as ep_poll_callback, we need to ensure the change is visible to other CPUs calling ep_poll_callback. We also need to ensure f_op->poll() has an up-to-date view of past events which occured before we modified the interest mask. So this barrier also pairs with the barrier in wq_has_sleeper(). This should guarantee either ep_poll_callback or f_op->poll() (or both) will notice the readiness of a recently-ready/modified item. This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in: http://thread.gmane.org/gmane.linux.kernel/1408782/Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Voellmy <andreas.voellmy@yale.edu> Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu> Cc: netdev@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aaro Koskinen authored
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Aaro Koskinen authored
We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt: convert to devm_ functions), and as a result the following compilation warning was introduced: drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove': drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Axel Lin authored
Otherwise, WDIOC_GETTIMEOUT returns wrong value if set_timeout fails. This patch also removes unnecessary ret variable in da9055_wdt_ping function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-