- 21 Apr, 2018 1 commit
-
-
Hernán Gonzalez authored
Also remove unnecessary parenthesis Signed-off-by:
Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 15 Apr, 2018 19 commits
-
-
Christophe JAILLET authored
'sca3000_configure_ring()' can fail, so test its return value and propagate it if needed. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order to simplify code and avoid a memory leak in an error path in 'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing. Sent via the next merge window as unimportant bug and there are other patches dependent on it. Signed-off-by:
-
Stefan Popa authored
The AD5694/AD5694R/AD5695R/AD5696/AD5696R are a family of 4 channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices have either no built-in reference, or built-in 2.5V reference. The AD5671R/AD5675R are similar, except that they have 8 instead of 4 channels. These devices are similar to AD5672R/AD5676/AD5676R and AD5684/AD5684R/AD5684/AD5685R/AD5686/AD5686R, except that they use i2c instead of spi. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5671R_5675R.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5696R_5695R_5694R.pdfSigned-off-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
-
Stefan Popa authored
In this patch restructures the existing ad5686 driver by adding a module for SPI and a header file, while the baseline module deals with the chip-logic. This is a necessary step, as this driver should support in the future similar devices which differ only in the type of interface used (I2C instead of SPI). Signed-off-by:
-
Stefan Popa authored
The AD5684R/AD5686R are a family of 4 channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices come either with a built-in reference or no built-in reference. The AD5672R/AD5676/AD5676R are similar, except that they have 8 channels instead of 4. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5672R_5676R.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686R_5685R_5684R.pdfSigned-off-by:
-
Stefan Popa authored
This driver acctually supports the AD5685R device and NOT the AD5685, which does not exist. Maintain old id entry in case we have devicetrees out there which are using the wrong name. More information can be found in the datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdfSigned-off-by:
-
Stefan Popa authored
This patch adds a new num_channels attribute as part of the ad5686_chip_info struct which replaces the AD5686_DAC_CHANNELS define. This is a necessary step, since this driver should support similar devices which differ only in the number of channels. Signed-off-by:
-
Stefan Popa authored
Add GPLv2+ SPDX identifier and remove license notice to keep the whole purpose of using an SPDx id. Signed-off-by:
-
Stefan Popa authored
This patch fixes some indentation issues and does not modify the functionality of the driver. Signed-off-by:
-
Douglas Fischer authored
Added support for the mpu9255 IMU to the mpu6050 driver. The register map is the same as the other chips; the only driver difference is the compatible string and the WHOAMI register value. Signed-off-by:
Douglas Fischer <fischerdouglasc@gmail.com> Signed-off-by:
-
Matt Ranostay authored
usleep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Cc: Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.org/lkml/2017/1/11/377Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Peter Rosin authored
Use the new probe style for i2c drivers. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
Use the new probe style for i2c drivers. Signed-off-by:
-
Jean-Baptiste Maneyrol authored
There is no need to flush fifo and loose all data when the iio buffer is full. Just drop the data by ignoring the error as commonly done in other drivers. Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Reviewed-by:
Martin Kelly <martin@martingkelly.com> Signed-off-by:
-
Hernán Gonzalez authored
Reorder some variable declarations in an inverse-pyramid scheme. Signed-off-by:
-
Hernán Gonzalez authored
Signed-off-by:
-
Hernán Gonzalez authored
Clear checkpatch.pl WARNING about multiple line derefence but creates a new one of line over 80 characters. In my opinion, it improves readability. Signed-off-by:
-
Hernán Gonzalez authored
Clear a couple more checkpatch.pl CHECKS. Signed-off-by:
-
Hernán Gonzalez authored
Data to read or write was being handled with the swab16() macro instead of using i2c_smbus_{read,write}_swapped. Signed-off-by:
-
- 08 Apr, 2018 3 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM ISM330DLC 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/ism330dlc.pdfSigned-off-by:
-
Lorenzo Bianconi authored
According to the latest datasheet, LSM6DSM and LSM6DSL imu sensors export GENMASK(10, 0) for FIFO threshold mask definition. Despite that is not an actual issue since write on fifo_th register is protected by max_fifo_size value, fix fifo_th and fifo_diff register definitions Fixes: 290a6ce1 ("iio: imu: add support to lsm6dsx driver") Signed-off-by:
-
- 30 Mar, 2018 10 commits
-
-
Shreeya Patel authored
Move the adis16209 driver out of staging directory and merge to the mainline IIO subsystem. Signed-off-by:
Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by:
-
Shreeya Patel authored
Use GENMASK to improve readability and remove the local variables used to store intermediate data. Signed-off-by:
-
Shreeya Patel authored
Remove few unused header files since the adis core handles the sysfs and buffer support. Signed-off-by:
-
Shreeya Patel authored
Add a blank line after return statements to improve the code readability. Signed-off-by:
-
Shreeya Patel authored
Prefer reverse christmas tree ordering of declarations to improve readability. Signed-off-by:
-
Shreeya Patel authored
Have indentation in field definitions to make them clearly different from the register addresses. Signed-off-by:
-
Jean-Baptiste Maneyrol authored
Signed-off-by:
-
Xingyu Chen authored
Add the SAR ADC driver for the Amlogic Meson-AXG SoC. Signed-off-by:
Xingyu Chen <xingyu.chen@amlogic.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Xingyu Chen authored
Update the documentation to expicitly support the Meson-AXG SoC. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Yixun Lan authored
Extract and promote common adc platform data into a new structure, to make it better share the info between several SoCs, this will avoid duplicating the code all over the place, Save a few memory and make the code more maintainable. Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Acked-by:
-
- 25 Mar, 2018 2 commits
-
-
Brian Masney authored
The events IIO_EV_INFO_VALUE and IIO_EV_INFO_ENABLE currently have a falling and rising direction configured. There does not need to be a separate distinction so this patch changes these to use the either direction. Directory listing of event sysfs attributes for a TSL2772 with this patch applied: in_intensity0_thresh_either_en in_intensity0_thresh_either_period in_intensity0_thresh_falling_value in_intensity0_thresh_rising_value in_proximity0_thresh_either_en in_proximity0_thresh_either_period in_proximity0_thresh_falling_value in_proximity0_thresh_rising_value Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Brian Masney authored
The hardware supports 16-bit ALS and proximity readings, however the datasheet recommends using the I2C auto increment protocol so that the correct high and low bytes are read even if the integration cycle ends between reading the lower and upper registers. Signed-off-by:
-
- 24 Mar, 2018 5 commits
-
-
Himanshu Jha authored
Move adis16201 driver out of staging and merge into mainline IIO subsystem. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Split the line over 80 characters limit to fix checkpatch warning. Signed-off-by:
-
Himanshu Jha authored
Use GENMASK to improve readability and remove the local variables used to store intermediate data. Signed-off-by:
-
Himanshu Jha authored
Remove few unused headers files since the adis core handles the buffer and sysfs support. Signed-off-by:
-
Brian Masney authored
Add Brian Masney's copyright and to the list of module authors for all of the staging cleanups. This patch also update's Jon Brenner's current work email address since AMS now owns TAOS. Signed-off-by:
-
