1. 16 Oct, 2019 18 commits
    • Eric Dumazet's avatar
      rxrpc: use rcu protection while reading sk->sk_user_data · 2ca4f6ca
      Eric Dumazet authored
      We need to extend the rcu_read_lock() section in rxrpc_error_report()
      and use rcu_dereference_sk_user_data() instead of plain access
      to sk->sk_user_data to make sure all rules are respected.
      
      The compiler wont reload sk->sk_user_data at will, and RCU rules
      prevent memory beeing freed too soon.
      
      Fixes: f0308fb0 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
      Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: David Howells <dhowells@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2ca4f6ca
    • Mahesh Bandewar's avatar
      Revert "blackhole_netdev: fix syzkaller reported issue" · bd74708c
      Mahesh Bandewar authored
      This reverts commit b0818f80.
      
      Started seeing weird behavior after this patch especially in
      the IPv6 code path. Haven't root caused it, but since this was
      applied to net branch, taking a precautionary measure to revert
      it and look / analyze those failures
      
      Revert this now and I'll send a better fix after analysing / fixing
      the weirdness observed.
      
      CC: Eric Dumazet <edumazet@google.com>
      CC: Wei Wang <weiwan@google.com>
      CC: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd74708c
    • Valentin Vidic's avatar
      net: usb: sr9800: fix uninitialized local variable · 77b6d09f
      Valentin Vidic authored
      Make sure res does not contain random value if the call to
      sr_read_cmd fails for some reason.
      
      Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com
      Signed-off-by: default avatarValentin Vidic <vvidic@valentin-vidic.from.hr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      77b6d09f
    • Florian Fainelli's avatar
      net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3 · efb86fed
      Florian Fainelli authored
      The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
      became 6 for GENET v4 and above, account for that difference.
      
      Fixes: aa09677c ("net: bcmgenet: add MDIO routines")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Acked-by: default avatarDoug Berger <opendmb@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      efb86fed
    • Ben Dooks (Codethink)'s avatar
      net: stmmac: make tc_flow_parsers static · bad28d88
      Ben Dooks (Codethink) authored
      The tc_flow_parsers is not used outside of the driver, so
      make it static to avoid the following sparse warning:
      
      drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static?
      Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bad28d88
    • Ben Dooks (Codethink)'s avatar
      davinci_cpdma: make cpdma_chan_split_pool static · 539825a5
      Ben Dooks (Codethink) authored
      The cpdma_chan_split_pool() function is not used outside of
      the driver, so make it static to avoid the following sparse
      warning:
      
      drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static?
      Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      539825a5
    • Thomas Bogendoerfer's avatar
      net: i82596: fix dma_alloc_attr for sni_82596 · 61c1d33d
      Thomas Bogendoerfer authored
      Commit 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs")
      switched dma allocation over to dma_alloc_attr, but didn't convert
      the SNI part to request consistent DMA memory. This broke sni_82596
      since driver doesn't do dma_cache_sync for performance reasons.
      Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.
      
      Fixes: 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs")
      Signed-off-by: default avatarThomas Bogendoerfer <tbogendoerfer@suse.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61c1d33d
    • Xin Long's avatar
      sctp: change sctp_prot .no_autobind with true · 63dfb793
      Xin Long authored
      syzbot reported a memory leak:
      
        BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
        backtrace:
      
          [...] slab_alloc mm/slab.c:3319 [inline]
          [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
          [...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
          [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
          [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
          [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
          [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
          [...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
          [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
          [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
          [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
          [...] __do_sys_setsockopt net/socket.c:2100 [inline]
      
      It was caused by when sending msgs without binding a port, in the path:
      inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
      .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
      not. Later when binding another port by sctp_setsockopt_bindx(), a new
      bucket will be created as bp->port is not set.
      
      sctp's autobind is supposed to call sctp_autobind() where it does all
      things including setting bp->port. Since sctp_autobind() is called in
      sctp_sendmsg() if the sk is not yet bound, it should have skipped the
      auto bind.
      
      THis patch is to avoid calling inet_autobind() in inet_send_prepare()
      by changing sctp_prot .no_autobind with true, also remove the unused
      .get_port.
      
      Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      63dfb793
    • Vinicius Costa Gomes's avatar
      sched: etf: Fix ordering of packets with same txtime · 28aa7c86
      Vinicius Costa Gomes authored
      When a application sends many packets with the same txtime, they may
      be transmitted out of order (different from the order in which they
      were enqueued).
      
      This happens because when inserting elements into the tree, when the
      txtime of two packets are the same, the new packet is inserted at the
      left side of the tree, causing the reordering. The only effect of this
      change should be that packets with the same txtime will be transmitted
      in the order they are enqueued.
      
      The application in question (the AVTP GStreamer plugin, still in
      development) is sending video traffic, in which each video frame have
      a single presentation time, the problem is that when packetizing,
      multiple packets end up with the same txtime.
      
      The receiving side was rejecting packets because they were being
      received out of order.
      
      Fixes: 25db26a9 ("net/sched: Introduce the ETF Qdisc")
      Reported-by: default avatarEderson de Souza <ederson.desouza@intel.com>
      Signed-off-by: default avatarVinicius Costa Gomes <vinicius.gomes@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      28aa7c86
    • Eric Dumazet's avatar
      net: avoid potential infinite loop in tc_ctl_action() · 39f13ea2
      Eric Dumazet authored
      tc_ctl_action() has the ability to loop forever if tcf_action_add()
      returns -EAGAIN.
      
      This special case has been done in case a module needed to be loaded,
      but it turns out that tcf_add_notify() could also return -EAGAIN
      if the socket sk_rcvbuf limit is hit.
      
      We need to separate the two cases, and only loop for the module
      loading case.
      
      While we are at it, add a limit of 10 attempts since unbounded
      loops are always scary.
      
      syzbot repro was something like :
      
      socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
      write(3, ..., 38) = 38
      setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
      sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)
      
      NMI backtrace for cpu 0
      CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
       nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
       arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
       trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
       check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
       watchdog+0x9d0/0xef0 kernel/hung_task.c:289
       kthread+0x361/0x430 kernel/kthread.c:255
       ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
      Sending NMI from CPU 0 to CPUs 1:
      NMI backtrace for cpu 1
      CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
      RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
      Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
      RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
      RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
      RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
      RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
      R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
      R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
      FS:  00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
       _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
       __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
       __wake_up+0xe/0x10 kernel/sched/wait.c:142
       netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
       netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
       netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
       netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
       rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
       tcf_add_notify net/sched/act_api.c:1343 [inline]
       tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
       tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
       rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
       netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
       rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
       netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
       netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
       netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
       sock_sendmsg_nosec net/socket.c:637 [inline]
       sock_sendmsg+0xd7/0x130 net/socket.c:657
       ___sys_sendmsg+0x803/0x920 net/socket.c:2311
       __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
       __do_sys_sendmsg net/socket.c:2365 [inline]
       __se_sys_sendmsg net/socket.c:2363 [inline]
       __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
       do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x440939
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      39f13ea2
    • Nishad Kamdar's avatar
      net: dsa: sja1105: Use the correct style for SPDX License Identifier · b790b554
      Nishad Kamdar authored
      This patch corrects the SPDX License Identifier style
      in header files related to Distributed Switch Architecture
      drivers for NXP SJA1105 series Ethernet switch support.
      It uses an expilict block comment for the SPDX License
      Identifier.
      
      Changes made by using a script provided by Joe Perches here:
      https://lkml.org/lkml/2019/2/7/46.
      Suggested-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarNishad Kamdar <nishadkamdar@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b790b554
    • Eric Dumazet's avatar
      tcp: fix a possible lockdep splat in tcp_done() · cab209e5
      Eric Dumazet authored
      syzbot found that if __inet_inherit_port() returns an error,
      we call tcp_done() after inet_csk_prepare_forced_close(),
      meaning the socket lock is no longer held.
      
      We might fix this in a different way in net-next, but
      for 5.4 it seems safer to relax the lockdep check.
      
      Fixes: d983ea6f ("tcp: add rcu protection around tp->fastopen_rsk")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cab209e5
    • David S. Miller's avatar
      Merge branch 'Update-MT7629-to-support-PHYLINK-API' · c9b96eb6
      David S. Miller authored
      MarkLee says:
      
      ====================
      Update MT7629 to support PHYLINK API
      
      This patch set has two goals :
      	1. Fix mt7629 GMII mode issue after apply mediatek
      	   PHYLINK support patch.
      	2. Update mt7629 dts to reflect the latest dt-binding
      	   with PHYLINK support.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9b96eb6
    • MarkLee's avatar
      arm: dts: mediatek: Update mt7629 dts to reflect the latest dt-binding · 2618500d
      MarkLee authored
      * Removes mediatek,physpeed property from dtsi that is useless in PHYLINK
      * Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
      * Set gmac1 to gmii mode that connect to a internal gphy
      Signed-off-by: default avatarMarkLee <Mark-MC.Lee@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2618500d
    • MarkLee's avatar
      net: ethernet: mediatek: Fix MT7629 missing GMII mode support · 4e3eff5b
      MarkLee authored
      In the original design, mtk_phy_connect function will set ge_mode=1
      if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct
      ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply
      mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will
      not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting
      will be incorrect for mt7629 GMII mode. This patch add the missing logic
      back to fix it.
      
      Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support")
      Signed-off-by: default avatarMarkLee <Mark-MC.Lee@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e3eff5b
    • David S. Miller's avatar
      Merge branch 'mpls-push-pop-fix' · 8d045995
      David S. Miller authored
      Davide Caratti says:
      
      ====================
      net/sched: fix wrong behavior of MPLS push/pop action
      
      this series contains two fixes for TC 'act_mpls', that try to address
      two problems that can be observed configuring simple 'push' / 'pop'
      operations:
      - patch 1/2 avoids dropping non-MPLS packets that pass through the MPLS
        'pop' action.
      - patch 2/2 fixes corruption of the L2 header that occurs when 'push'
        or 'pop' actions are configured in TC egress path.
      
      v2: - change commit message in patch 1/2 to better describe that the
            patch impacts only TC, thanks to Simon Horman
          - fix missing documentation of 'mac_len' in patch 2/2
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d045995
    • Davide Caratti's avatar
      net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions · fa4e0f88
      Davide Caratti authored
      the following script:
      
       # tc qdisc add dev eth0 clsact
       # tc filter add dev eth0 egress protocol ip matchall \
       > action mpls push protocol mpls_uc label 0x355aa bos 1
      
      causes corruption of all IP packets transmitted by eth0. On TC egress, we
      can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push'
      operation will result in an overwrite of the first 4 octets in the packet
      L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same
      error pattern is present also in the MPLS 'pop' operation. Fix this error
      in act_mpls data plane, computing 'mac_len' as the difference between the
      network header and the mac header (when not at TC ingress), and use it in
      MPLS 'push'/'pop' core functions.
      
      v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
          in skb_mpls_pop(), reported by kbuild test robot
      
      CC: Lorenzo Bianconi <lorenzo@kernel.org>
      Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC")
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fa4e0f88
    • Davide Caratti's avatar
      net: avoid errors when trying to pop MLPS header on non-MPLS packets · dedc5a08
      Davide Caratti authored
      the following script:
      
       # tc qdisc add dev eth0 clsact
       # tc filter add dev eth0 egress matchall action mpls pop
      
      implicitly makes the kernel drop all packets transmitted by eth0, if they
      don't have a MPLS header. This behavior is uncommon: other encapsulations
      (like VLAN) just let the packet pass unmodified. Since the result of MPLS
      'pop' operation would be the same regardless of the presence / absence of
      MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0
      when dealing with non-MPLS packets.
      
      For the OVS use-case, this is acceptable because __ovs_nla_copy_actions()
      already ensures that MPLS 'pop' operation only occurs with packets having
      an MPLS Ethernet type (and there are no other callers in current code, so
      the semantic change should be ok).
      
      v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon
          Horman
      
      Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC")
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dedc5a08
  2. 15 Oct, 2019 12 commits
  3. 14 Oct, 2019 1 commit
    • Miaoqing Pan's avatar
      ath10k: fix latency issue for QCA988x · d79749f7
      Miaoqing Pan authored
      (kvalo: cherry picked from commit 1340cc63 in
      wireless-drivers-next to wireless-drivers as this a frequently reported
      regression)
      
      Bad latency is found on QCA988x, the issue was introduced by
      commit 4504f0e5 ("ath10k: sdio: workaround firmware UART
      pin configuration bug"). If uart_pin_workaround is false, this
      change will set uart pin even if uart_print is false.
      
      Tested HW: QCA9880
      Tested FW: 10.2.4-1.0-00037
      
      Fixes: 4504f0e5 ("ath10k: sdio: workaround firmware UART pin configuration bug")
      Signed-off-by: default avatarMiaoqing Pan <miaoqing@codeaurora.org>
      Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
      d79749f7
  4. 13 Oct, 2019 9 commits
    • YueHaibing's avatar
      netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exit · 33902b4a
      YueHaibing authored
      In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops
      should be unregistered before return.
      
      In nsim_fib_exit(), unregister_fib_notifier should be called before
      nsim_fib_net_ops be unregistered, otherwise may cause use-after-free:
      
      BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim]
      Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499
      
      CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
      Workqueue: ipv6_addrconf addrconf_dad_work [ipv6]
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0xa9/0x10e lib/dump_stack.c:113
       print_address_description+0x65/0x380 mm/kasan/report.c:351
       __kasan_report+0x149/0x18d mm/kasan/report.c:482
       kasan_report+0xe/0x20 mm/kasan/common.c:618
       nsim_fib_event_nb+0x342/0x570 [netdevsim]
       notifier_call_chain+0x52/0xf0 kernel/notifier.c:95
       __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185
       call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30
       call_fib6_entry_notifiers+0xc1/0x100 [ipv6]
       fib6_add+0x92e/0x1b10 [ipv6]
       __ip6_ins_rt+0x40/0x60 [ipv6]
       ip6_ins_rt+0x84/0xb0 [ipv6]
       __ipv6_ifa_notify+0x4b6/0x550 [ipv6]
       ipv6_ifa_notify+0xa5/0x180 [ipv6]
       addrconf_dad_completed+0xca/0x640 [ipv6]
       addrconf_dad_work+0x296/0x960 [ipv6]
       process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269
       worker_thread+0x5c/0x670 kernel/workqueue.c:2415
       kthread+0x1d7/0x200 kernel/kthread.c:255
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
      
      Allocated by task 3388:
       save_stack+0x19/0x80 mm/kasan/common.c:69
       set_track mm/kasan/common.c:77 [inline]
       __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493
       kmalloc include/linux/slab.h:557 [inline]
       kzalloc include/linux/slab.h:748 [inline]
       ops_init+0xa9/0x220 net/core/net_namespace.c:127
       __register_pernet_operations net/core/net_namespace.c:1135 [inline]
       register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212
       register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253
       nsim_fib_init+0x12/0x70 [netdevsim]
       veth_get_link_ksettings+0x2b/0x50 [veth]
       do_one_initcall+0xd4/0x454 init/main.c:939
       do_init_module+0xe0/0x330 kernel/module.c:3490
       load_module+0x3c2f/0x4620 kernel/module.c:3841
       __do_sys_finit_module+0x163/0x190 kernel/module.c:3931
       do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 3534:
       save_stack+0x19/0x80 mm/kasan/common.c:69
       set_track mm/kasan/common.c:77 [inline]
       __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455
       slab_free_hook mm/slub.c:1423 [inline]
       slab_free_freelist_hook mm/slub.c:1474 [inline]
       slab_free mm/slub.c:3016 [inline]
       kfree+0xe9/0x2d0 mm/slub.c:3957
       ops_free net/core/net_namespace.c:151 [inline]
       ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184
       ops_free_list net/core/net_namespace.c:182 [inline]
       __unregister_pernet_operations net/core/net_namespace.c:1165 [inline]
       unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224
       unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271
       nsim_fib_exit+0x11/0x20 [netdevsim]
       nsim_module_exit+0x16/0x21 [netdevsim]
       __do_sys_delete_module kernel/module.c:1015 [inline]
       __se_sys_delete_module kernel/module.c:958 [inline]
       __x64_sys_delete_module+0x244/0x330 kernel/module.c:958
       do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Fixes: 59c84b9f ("netdevsim: Restore per-network namespace accounting for fib entries")
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33902b4a
    • Cédric Le Goater's avatar
      net/ibmvnic: Fix EOI when running in XIVE mode. · 11d49ce9
      Cédric Le Goater authored
      pSeries machines on POWER9 processors can run with the XICS (legacy)
      interrupt mode or with the XIVE exploitation interrupt mode. These
      interrupt contollers have different interfaces for interrupt
      management : XICS uses hcalls and XIVE loads and stores on a page.
      H_EOI being a XICS interface the enable_scrq_irq() routine can fail
      when the machine runs in XIVE mode.
      
      Fix that by calling the EOI handler of the interrupt chip.
      
      Fixes: f23e0643 ("ibmvnic: Clear pending interrupt after device reset")
      Signed-off-by: default avatarCédric Le Goater <clg@kaod.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      11d49ce9
    • Alexandre Belloni's avatar
      net: lpc_eth: avoid resetting twice · c23936fa
      Alexandre Belloni authored
      __lpc_eth_shutdown is called after __lpc_eth_reset but it is already
      calling __lpc_eth_reset. Avoid resetting the IP twice.
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c23936fa
    • David S. Miller's avatar
      Merge branch 'tcp-address-KCSAN-reports-in-tcp_poll-part-I' · 3f233809
      David S. Miller authored
      Eric Dumazet says:
      
      ====================
      tcp: address KCSAN reports in tcp_poll() (part I)
      
      This all started with a KCSAN report (included
      in "tcp: annotate tp->rcv_nxt lockless reads" changelog)
      
      tcp_poll() runs in a lockless way. This means that about
      all accesses of tcp socket fields done in tcp_poll() context
      need annotations otherwise KCSAN will complain about data-races.
      
      While doing this detective work, I found a more serious bug,
      addressed by the first patch ("tcp: add rcu protection around
      tp->fastopen_rsk").
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f233809
    • Eric Dumazet's avatar
      tcp: annotate sk->sk_wmem_queued lockless reads · ab4e846a
      Eric Dumazet authored
      For the sake of tcp_poll(), there are few places where we fetch
      sk->sk_wmem_queued while this field can change from IRQ or other cpu.
      
      We need to add READ_ONCE() annotations, and also make sure write
      sides use corresponding WRITE_ONCE() to avoid store-tearing.
      
      sk_wmem_queued_add() helper is added so that we can in
      the future convert to ADD_ONCE() or equivalent if/when
      available.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab4e846a
    • Eric Dumazet's avatar
      tcp: annotate sk->sk_sndbuf lockless reads · e292f05e
      Eric Dumazet authored
      For the sake of tcp_poll(), there are few places where we fetch
      sk->sk_sndbuf while this field can change from IRQ or other cpu.
      
      We need to add READ_ONCE() annotations, and also make sure write
      sides use corresponding WRITE_ONCE() to avoid store-tearing.
      
      Note that other transports probably need similar fixes.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e292f05e
    • Eric Dumazet's avatar
      tcp: annotate sk->sk_rcvbuf lockless reads · ebb3b78d
      Eric Dumazet authored
      For the sake of tcp_poll(), there are few places where we fetch
      sk->sk_rcvbuf while this field can change from IRQ or other cpu.
      
      We need to add READ_ONCE() annotations, and also make sure write
      sides use corresponding WRITE_ONCE() to avoid store-tearing.
      
      Note that other transports probably need similar fixes.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ebb3b78d
    • Eric Dumazet's avatar
      tcp: annotate tp->urg_seq lockless reads · d9b55bf7
      Eric Dumazet authored
      There two places where we fetch tp->urg_seq while
      this field can change from IRQ or other cpu.
      
      We need to add READ_ONCE() annotations, and also make
      sure write side use corresponding WRITE_ONCE() to avoid
      store-tearing.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9b55bf7
    • Eric Dumazet's avatar
      tcp: annotate tp->snd_nxt lockless reads · e0d694d6
      Eric Dumazet authored
      There are few places where we fetch tp->snd_nxt while
      this field can change from IRQ or other cpu.
      
      We need to add READ_ONCE() annotations, and also make
      sure write sides use corresponding WRITE_ONCE() to avoid
      store-tearing.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0d694d6