AC'97 was quite commonly used on at least i.MX designs so enable the
glue code that allows use of AC'97 with ASoC based designs to improve
testing coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.18-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig

- Enable essential PMIC and regulatro drivers for MT8195.
- Enable Arm arch timer for MT7629.

* tag 'v5.18-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: mediatek: select arch timer for mt7629
  arm64: defconfig: enable some mt6360 PMIC drivers
  arm64: defconfig: enable MT6359 regulator driver

Link: https://lore.kernel.org/r/3a6e5606-7b89-2ad8-7b45-21d3a4e9e706@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM defconfig updates for v5.19

This enables the Qualcomm random number generator and hardware crypto
drivers, as well as DebugFS support, in the qcom defconfig.

* tag 'qcom-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: qcom_defconfig: enable debug fs support
  ARM: qcom_defconfig: enable options for Qualcomm random number generator

Link: https://lore.kernel.org/r/20220509182209.317208-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig updates for v5.19

This enables the GPI DMA driver, providing access to I2C and SPI
controllers that are setup for shared ownership. The PCIe Gen2 PHY
provides PCI support on the QCS405 platform, among others. The PMIC
watchdog, concell and ADC5 ThermalMonitor drivers provides housekeeping
services on a range of different platforms.

The Display and Video clock controllers for SM8250 are enabled, as is
the audio RX/TX macros and the WCD9335 audio codec driver.

Lastly the Ath11k driver, used on a variety of modern boards and the
FastRPC driver, which provides an interface for computational offloading
on the Hexagon cores, are enabled.

All drivers, except the SM8250 Display and Video clock controller
drivers are enabled as modules. The two clock controllers provides
power-domains and must be builtin to reduce the risk of probe deferral
happening (and being ignored) after late initcall.

* tag 'qcom-arm64-defconfig-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Enable Qualcomm GPI DMA Driver
  arm64: defconfig: Enable Qualcomm PCIe Gen2 PHY
  arm64: defconfig: Enable SM8250 video clock controller
  arm64: defconfig: Enable PM8916 watchdog driver
  arm64: defconfig: enable ath11k driver
  arm64: defconfig: Enable some Qualcomm drivers
  arm64: defconfig: reenable SM_DISPCC_8250
  arm64: defconfig: enable wcd9335 codec as module
  arm64: defconfig: enable Qualcomm RX and TX macro for SM8250 audio

Link: https://lore.kernel.org/r/20220509170158.311962-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig update for 5.19:

- Enable the WM8524 codec driver as module in arm64 defconfig for audio
  support on imx8mn-evk board.
- Enable the ADC part of the STMPE MFD in imx_v6_v7_defconfig, as the
  SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811.

* tag 'imx-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Enable the WM8524 codec driver
  ARM: imx_v6_v7_defconfig: Enable the ADC part of the STMPE MFD

Link: https://lore.kernel.org/r/20220508033843.2773685-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-config-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig

TI K3 defconfig updates for v5.19

* Enable TIDSS and Display Port related configs
* Enable Cadence Torrent PHY for Display Port

* tag 'ti-k3-config-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable configs for DisplayPort on J721e

Link: https://lore.kernel.org/r/88cd734e-47a7-4307-c119-8f6ec6c40452@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The BeagleBone Black supports audio over HDMI, using a combination of the
DaVinci McASP (used for audio by a very large proportion of DaVinci systems
with audio support) and a TDA998x device driving the HDMI link (this is a
very widely used driver). Build both drivers as modules in multi_v7_defconfig
so they can be more easily included in testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration updates for v5.19-rc1

This enables the driver for the new ASRC audio block that is found on
Tegra186 and later.

* tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Build Tegra ASRC module

Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

ARM: tegra: Default configuration fixes for v5.18

This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.

* tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
  ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option

Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.19 (take two)

  - Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64
    defconfig,

* tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable Renesas RZ/V2M SoC
  arm64: defconfig: Enable ARCH_R9A07G043

Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig #1 for 5.19:

- update to MTD options and use of UBI
- addition of systemd needed options
- sama7: addition of reset, camera and microphone drivers

* tag 'at91-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: at91: Enable AUTOFS_FS required by systemd
  ARM: configs: at91: Enable options required for systemd
  ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
  ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
  ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
  ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
  ARM: configs: at91: sama7: add xisc and csi2dc
  ARM: multi_v7_defconfig: add atmel video pipeline modules
  ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS

Link: https://lore.kernel.org/r/20220506085425.58270-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Align all at91 defconfigs to required options for systemd.
The missing of autofs would cause warnings on boot
when not available.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Even smaller embedded systems are using systemd these days, as
are test automation systems like KernelCI, so it is useful to be
able to use systemd on these boards by default. Enable options
that are missing in the at91_dt_defconfig, cgroups which is
critical and autofs4 which is less critical but causes warnings
on boot when not available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220505171043.553079-1-broonie@kernel.org

Enable CONFIG_RESET_CONTROLLER. It is necessary for resetting individual
in SoC devices.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220408080031.2527232-11-claudiu.beznea@microchip.com

Enable drivers needed for Microchip's PDMC and PDM microphones.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220307122202.2251639-7-codrin.ciubotariu@microchip.com

Address read only block filesystems like SquashFS, and use MTD_UBI_BLOCK
to benefit of UBI's bit-flip handling and wear-levelling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-3-tudor.ambarus@microchip.com

Use fastmap to accelerate the attach procedure.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
[nicolas.ferre@microchip.com: removed unrelated changes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-2-tudor.ambarus@microchip.com

Enable XISC and CSI2DC drivers.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220503095127.48710-5-eugen.hristev@microchip.com

Add drivers for the atmel video capture pipeline: atmel isc, xisc and
microchip csi2dc.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220503095127.48710-6-eugen.hristev@microchip.com

Using mtdblock on raw flashes is generally a bad idea as it lacks
wear-leveling, bad block handling or power-cut management.
What happens when you use mtdblock and you change any sector of your
mtdblockX device, is that it reads the whole corresponding eraseblock into
the memory, erases the eraseblock, changes the sector in RAM, and writes
the whole eraseblock back. If you have a power failure when the eraseblock
is being erased, you lose all the block device sectors in it. The flash
will likely decay soon because the eraseblocks will wear out.

Remove this archaic tool as its use case should rather be only for debug
purposes. This means that write-capable block file systems like ext2,
ext3, FAT, etc. will no longer be addressed with at91 defconfigs. For
read only block filesystems like SquashFS, use MTD_UBI_BLOCK instead and
benefit of UBI's bit-flip handling and wear-levelling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-1-tudor.ambarus@microchip.com

This pull request contains Broadcom ARM-based SoC changes to the
multi_v7_defconfig file, please pull the following:

- William enables the Broadcom BCA SoC Kconfig option to get build
  coverage for this newly added SoC

* tag 'arm-soc/for-5.19/defconfig' of https://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig

Link: https://lore.kernel.org/r/20220504210942.1838248-1-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

imx8mn-evk has a WM8524 codec.

Enable the WM8524 codec driver so that audio can be functional
on this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'omap-for-v5.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig

Defconfig changes for omaps

Changes to add tlv320aic3x and is176x drivers as loadable modules
to omap2plus_defconfig.

* tag 'omap-for-v5.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable ISP176x USB driver
  ARM: omap2plus_defconfig: enable TLV320AIC3X

Link: https://lore.kernel.org/r/pull-1651061256-836848@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.19

  - Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
    Quad GMSL2 Deserializer in the arm64 defconfig,
  - Refresh shmobile_defconfig for v5.18-rc1.

* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: defconfig: Refresh for v5.18-rc1
  arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
  arm64: defconfig: Enable ARCH_R9A07G054

Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Key devices that support displays on SoCs like the Komeda DRM driver, the
older HDLCD were not enabled by default and should be so displays can work
out of the box on defconfig. Also Candence I2C support should be enabled so
the PHY and thus displays can work too.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Link: https://lore.kernel.org/r/20220427114200.111904-1-carsten.haitzler@foss.arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Commit 85b6fcad ("clocksource/drivers/ux500: Drop Ux500 custom
SCHED_CLOCK") removes a sched_clock workaround and its corresponding
config CLKSRC_NOMADIK_MTU_SCHED_CLOCK. Since then, selecting
CLKSRC_NOMADIK_MTU_SCHED_CLOCK in ./arch/arm/mach-nomadik/Kconfig has no
effect and ./scripts/checkkconfigsymbols.py warns:

CLKSRC_NOMADIK_MTU_SCHED_CLOCK
Referencing files: arch/arm/mach-nomadik/Kconfig

Simply drop selecting the obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220410145623.2620380-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the Renesas RZ/V2M SoC and the uart it uses.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220330154024.112270-12-phil.edworthy@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable support for the Renesas RZ/G2UL SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220423130206.114032-1-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable DRM and PHY configs required for supporting
DisplayPort on J721e
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20220426152926.20953-1-r-ravikumar@ti.com

Asynchronous Sample Rate Converter (ASRC) module is a client of AHUB on
Tegra186 and later SoCs. To use this module enable the driver build.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be
used to build a basic kernel for BCM47622 booting to console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This chip has an armv7 arch timer according to the dts. Select it in
Kconfig to enforce the support for it.
Otherwise the system time is just completely wrong if user forget to
enable ARM_ARCH_TIMER in kernel config.

Fixes: a43379dd ("arm: mediatek: add MT7629 smp bring up code")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20220409091347.2473449-1-gch981213@gmail.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Enable the charger and regulator driver for the
MT6360 PMIC. These drivers are essential for
some MediaTek MT8195 based boards to boot properly.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-5-fparent@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The PMIC regulators are essentials to be able to
boot MediaTek MT8195 based boards to userspace.
Like the other MediaTek PMIC regulator driver,
let's enable as well the one for the MT6359 PMIC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220415150003.1793063-4-fparent@baylibre.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The Logic PD Torpedo baseboard has an ISP1763 USB controller attached
to the GPMC bus.  Enable the driver as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>

Message-Id: <20220221184107.2321951-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit a96d2ba2 ("ASoC: codecs: tlv320aic3x: move I2C to separated
file") split the driver into SPI and I2C code and also provided a
separate configuration option for it.

The RX51 audio fails to probe since this commit, so let's add this
non-obvious configuration option to the defconfig.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Message-Id: <20211216150506.31163-1-merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Refresh the defconfig for Renesas ARM systems:
  - Move CONFIG_V4L_MEM2MEM_DRIVERS (moved in commit 256bf685
    ("media: platform: move platform menu dependencies to drivers")),
  - Move CONFIG_DEBUG_FS (moved in commit f9b3cd24
    ("Kconfig.debug: make DEBUG_INFO selectable from a choice")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/922ba60d81a71acfae5d88c1991d8c96bb2b3527.1649947421.git.geert+renesas@glider.be

Increase build and test coverage by enabling modular support for the
Maxim MAX96712 Quad GMSL2 Deserializer, as used on the Renesas Falcon
board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7b5ea7eaabc1da79fd974f9d9845a5a527f2fb14.1649947458.git.geert+renesas@glider.be

The SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811. Enable
its driver.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>