- 07 Jun, 2016 15 commits
-
-
Noa Osherovich authored
BlueFlame support is reported only for PFs when the HCA capability is on. Fixes: 938fe83c ('net/mlx5_core: New device capabilities...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Noa Osherovich authored
Some variables were not initialized properly: max_recv_wr, max_recv_sge, max_send_wr, qp_context and max_inline_data. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Noa Osherovich authored
When PAGE_SIZE is larger than 4K, the user shouldn't be able to query the HCA core clock. This counter is within 4KB boundary and the user-space shall not read information that's after this boundary. Fixes: b368d7cb ('IB/mlx5: Add hca_core_clock_offset to...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Eran Ben Elisha authored
Add a 4-digit padding to show FW version in proper format. Fixes: 9603b61d ('mlx5: Move pci device handling from...') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Noa Osherovich authored
FW port-change events are fired on Active <-> non Active port state transitions only. When the port state changes from Active to Initializing (Active -> Down -> Initializing), a single event is fired. The HCA transitions from Down to Initializing unless prevented from doing so, hence the driver should also propagate events when the port state is Initializing to consumers so they'll be aware that the port is no longer Active and act accordingly. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Maor Gottlieb authored
Flow steering is supported by mlx5 device when the following features are supported by firmware: 1. NIC RX flow table. 2. Device has enough flow steering levels. 3. Atomic modification of flow table entry. 4. Flow tables chaining. To check if flow steering is supported it's enough to check if the driver opened the mlx5 bypass namespace. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Max Gurtovoy authored
Replace the few u64 casts with ULL to match the rest of the casts. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Max Gurtovoy authored
ib_device_cap_flags 64-bit expansion caused caps overlapping and made consumers read wrong device capabilities. For example IB_DEVICE_SG_GAPS_REG was falsely read by the iser driver causing it to use a non-existing capability. This happened because signed int becomes sign extended when converted it to u64. Fix this by casting IB_DEVICE_ON_DEMAND_PAGING enumeration to ULL. Fixes: f5aa9159 ('IB/core: Add arbitrary sg_list support') Reported-by: Robert LeBlanc <robert@leblancnet.us> Cc: Stable <stable@vger.kernel.org> #[v4.6+] Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Mark Bloch authored
For dynamically allocated sysfs attributes there is a need to call sysfs_attr_init in order to comply with lockdep, not calling it will result in error complaining key is not in .data section. Fixes: b40f4757 ("IB/core: Make device counter infrastructure dynamic") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Mark Bloch authored
Align locking usage when touching device address with rest of the kernel. Lock the bottom half when doing so using netif_addr_lock_bh. This also solves the following case as reported by lockdep: CPU0 CPU1 ---- ---- lock(_xmit_INFINIBAND); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(_xmit_INFINIBAND); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: 492a7e67 ("IB/IPoIB: Allow setting the device address") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Aviv Heller authored
When deleting a default GID from the cache, its gid_type field is set to 0. This could set the gid_type to RoCE v1 for a RoCE v2 default GID, essentially making it inaccessible to future modifications, since it is no longer found by find_gid(). This fix preserves the gid_type value for default gids during cache operations. Fixes: b39ffa1d ('IB/core: Add gid_type to gid attribute') Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Erez Shitrit authored
In ipoib_remove_one the driver holds the rtnl_lock and tries to do some operation like dev_change_flags or unregister_netdev, while sysfs callback like ipoib_vlan_delete holds sysfs mutex and tries to hold the rtnl_lock via rtnl_trylock() and restart_syscall() if the lock is not free, meanwhile ipoib_remove_one tries to get the sysfs lock in order to free its sysfs directory, and we will get a->b, b->a deadlock. Trace like the following: schedule+0x37/0x80 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0xb5/0x120 mutex_lock+0x23/0x40 rtnl_lock+0x15/0x20 netdev_run_todo+0x17c/0x320 rtnl_unlock+0xe/0x10 ipoib_vlan_delete+0x11b/0x1b0 [ib_ipoib] delete_child+0x54/0x80 [ib_ipoib] dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 mutex_lock+0x16/0x40 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x16/0x75 And schedule+0x37/0x80 __kernfs_remove+0x1a8/0x260 ? wake_atomic_t_function+0x60/0x60 kernfs_remove+0x25/0x40 sysfs_remove_dir+0x50/0x80 kobject_del+0x18/0x50 device_del+0x19f/0x260 netdev_unregister_kobject+0x6a/0x80 rollback_registered_many+0x1fd/0x340 rollback_registered+0x3c/0x70 unregister_netdevice_queue+0x55/0xc0 unregister_netdev+0x20/0x30 ipoib_remove_one+0x114/0x1b0 [ib_ipoib] ib_unregister_client+0x4a/0x170 [ib_core] ? find_module_all+0x71/0xa0 ipoib_cleanup_module+0x10/0x94 [ib_ipoib] SyS_delete_module+0x1b5/0x210 entry_SYSCALL_64_fastpath+0x16/0x75 The fix is by checking the flag IPOIB_FLAG_INTF_ON_DESTROY in order to get out from the sysfs function. Fixes: 862096a8 ("IB/ipoib: Add more rtnl_link_ops callbacks") Fixes: 9baa0b03 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Eli Cohen authored
Currently ib_query_port always attempts to to read the subnet prefix by calling ib_query_gid(). For RoCE/iWARP there is no subnet manager and no subnet prefix. Fix this by querying GID[0] only for IB networks. Fixes: fad61ad4 ('IB/core: Add subnet prefix to port info') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
Between the initial and final versions of the function setup_hw_stats, the order of variable initialization was changed. However, the unwind flow on error did not properly keep up with the flow changes. Make the unwind flow match a proper unwind of the allocation flow, then remove no longer needed variable initializations. Fixes: b40f4757 (IB/core: Make device counter infrastructure dynamic) Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
The new sysfs hw_counters code had an off by one in its array allocation length. Fix that and the comment along with it. Reported-by: Mark Bloch <markb@mellanox.com> Fixes: b40f4757 (IB/core: Make device counter infrastructure dynamic) Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 06 Jun, 2016 15 commits
-
-
Bart Van Assche authored
Avoid that sparse reports the following warnings for the hfi1 driver: trace.c:217:13: warning: no previous prototype for ‘print_u64_array’ [-Wmissing-prototypes] user_sdma.c:1361:17: warning: dubious: !x & y Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
The first argument of test_bit() and clear_bit() is a bit number and not a bitmask. Hence change that first argument from (1 << 0) into 0. This patch avoids that smatch reports the following warnings: user_sdma.c:1059: sdma_cache_evict() warn: test_bit() takes a bit number user_sdma.c:1590: sdma_rb_remove() warn: test_bit() takes a bit number Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Make the indentation of the source code consistent. Detected by smatch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
This patch avoids that sparse reports the following warning: rdmavt/qp.c:507:17: warning: context imbalance in 'rvt_reset_qp' - unexpected unlock Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Make indentation consistent. Detected by smatch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hal Rosenstock <hal@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Reviewed-By: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Make indentation consistent. Detected by smatch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Cc: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@gimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Because patch "IB/srp: Move common code into the caller" was applied partially srp_map_sg_dma() doesn't work properly. Fix this by applying the remainder of that patch. See also http://thread.gmane.org/gmane.linux.drivers.rdma/35803/focus=35811. Fixes: 3849e44d ("IB/srp: Move common code into the caller") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sai@grimberg.me> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Avoid that mapping fails due to use_fast_reg != 0 or use_fmr != 0 if both member variables should be zero (if never_register == 1 or if neither FMR nor FR is supported). Remove an initialization that became superfluous due to changing a kmalloc() into a kzalloc() call. Fixes: 509c5f33 ("IB/srp: Prevent mapping failures") Cc: Sagi Grimberg <sai@grimberg.m> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Perform the test for device managed flow steering support even if memory windows are not supported. I noticed this because smatch reported inconsistent indentation for the device managed flow steering support test. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Krzysztof Kozlowski authored
The DMA attributes are set but never used. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Colin Ian King authored
The current error handling in setup_hw_stats has a couple of issues. It is possible to generate a null pointer deference on the kfree of hsag->attrs[i] because two of the early error exit paths jump to the kfree when hsags NULL and not allocated. Fix this by moving the kfree on stats and jumping to that, avoiding the hsag freeing. Secondly, there is a memory leak of stats if the hsag allocation fails; instead of returning, jump to the kfree on stats. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
We should return the error code if ib_add_ibnl_clients() fails. The current code returns success. Fixes: 735c631a ('IB/core: Register SA ibnl client during ib_core initialization') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
When CONFIG_FRAME_WARN is set to 1024 bytes, which is useful to find stack consumers, we get a warning in hfi1 driver. drivers/infiniband/hw/hfi1/affinity.c: In function ‘hfi1_get_proc_affinity’: drivers/infiniband/hw/hfi1/affinity.c:415:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] This change removes unneeded buf[1024] declaration and usage. Fixes: f48ad614 ("IB/hfi1: Move driver out of staging") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dan Carpenter authored
That extra tabs are misleading. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
ib_cm_notify() can be called from interrupt context. Hence do not reenable interrupts unconditionally in cm_establish(). This patch avoids that lockdep reports the following warning: WARNING: CPU: 0 PID: 23317 at kernel/locking/lockdep.c:2624 trace _hardirqs_on_caller+0x112/0x1b0 DEBUG_LOCKS_WARN_ON(current->hardirq_context) Call Trace: <IRQ> [<ffffffff812bd0e5>] dump_stack+0x67/0x92 [<ffffffff81056f21>] __warn+0xc1/0xe0 [<ffffffff81056f8a>] warn_slowpath_fmt+0x4a/0x50 [<ffffffff810a5932>] trace_hardirqs_on_caller+0x112/0x1b0 [<ffffffff810a59dd>] trace_hardirqs_on+0xd/0x10 [<ffffffff815992c7>] _raw_spin_unlock_irq+0x27/0x40 [<ffffffffa0382e9c>] ib_cm_notify+0x25c/0x290 [ib_cm] [<ffffffffa068fbc1>] srpt_qp_event+0xa1/0xf0 [ib_srpt] [<ffffffffa04efb97>] mlx4_ib_qp_event+0x67/0xd0 [mlx4_ib] [<ffffffffa034ec0a>] mlx4_qp_event+0x5a/0xc0 [mlx4_core] [<ffffffffa03365f8>] mlx4_eq_int+0x3d8/0xcf0 [mlx4_core] [<ffffffffa0336f9c>] mlx4_msi_x_interrupt+0xc/0x20 [mlx4_core] [<ffffffff810b0914>] handle_irq_event_percpu+0x64/0x100 [<ffffffff810b09e4>] handle_irq_event+0x34/0x60 [<ffffffff810b3a6a>] handle_edge_irq+0x6a/0x150 [<ffffffff8101ad05>] handle_irq+0x15/0x20 [<ffffffff8101a66c>] do_IRQ+0x5c/0x110 [<ffffffff8159a2c9>] common_interrupt+0x89/0x89 [<ffffffff81297a17>] blk_run_queue_async+0x37/0x40 [<ffffffffa0163e53>] rq_completed+0x43/0x70 [dm_mod] [<ffffffffa0164896>] dm_softirq_done+0x176/0x280 [dm_mod] [<ffffffff812a26c2>] blk_done_softirq+0x52/0x90 [<ffffffff8105bc1f>] __do_softirq+0x10f/0x230 [<ffffffff8105bec8>] irq_exit+0xa8/0xb0 [<ffffffff8103653e>] smp_trace_call_function_single_interrupt+0x2e/0x30 [<ffffffff81036549>] smp_call_function_single_interrupt+0x9/0x10 [<ffffffff8159a959>] call_function_single_interrupt+0x89/0x90 <EOI> Fixes: commit be4b4993 (IB/cm: Do not queue work to a device that's going away) Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Nikolay Borisov <kernel@kyup.com> Cc: stable <stable@vger.kernel.org> # v4.2+ Acked-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 05 Jun, 2016 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Fix printk time stamps on SMP systems which got wrong due to a patch which was added during the merge window - Fix two bugs in the stack backtrace code: Races in module unloading and possible invalid accesses to memory due to wrong instruction decoding (Mikulas Patocka) - Fix userspace crash when syscalls access invalid unaligned userspace addresses. Those syscalls will now return EFAULT as expected. (tagged for stable kernel series) * 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Move die_if_kernel() prototype into traps.h header parisc: Fix pagefault crash in unaligned __get_user() call parisc: Fix printk time during boot parisc: Fix backtrace on PA-RISC
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key handling update from James Morris: "This alters a new keyctl function added in the current merge window to allow for a future extension planned for the next merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Add placeholder for KDF usage with DH
-
Eric W. Biederman authored
The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Helge Deller authored
Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
One of the debian buildd servers had this crash in the syslog without any other information: Unaligned handler failed, ret = -2 clock_adjtime (pid 22578): Unaligned data reference (code 28) CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111100000001111 Tainted: G E r00-03 000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0 r04-07 00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff r08-11 0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4 r12-15 000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b r16-19 0000000000028800 0000000000000001 0000000000000070 00000001bde7c218 r20-23 0000000000000000 00000001bde7c210 0000000000000002 0000000000000000 r24-27 0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0 r28-31 0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218 sr00-03 0000000001200000 0000000001200000 0000000000000000 0000000001200000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88 IIR: 0ca0d089 ISR: 0000000001200000 IOR: 00000000fa6f7fff CPU: 1 CR30: 00000001bde7c000 CR31: ffffffffffffffff ORIG_R28: 00000002369fe628 IAOQ[0]: compat_get_timex+0x2dc/0x3c0 IAOQ[1]: compat_get_timex+0x2e0/0x3c0 RP(r2): compat_get_timex+0x40/0x3c0 Backtrace: [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0 [<0000000040205024>] syscall_exit+0x0/0x14 This means the userspace program clock_adjtime called the clock_adjtime() syscall and then crashed inside the compat_get_timex() function. Syscalls should never crash programs, but instead return EFAULT. The IIR register contains the executed instruction, which disassebles into "ldw 0(sr3,r5),r9". This load-word instruction is part of __get_user() which tried to read the word at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The unaligned handler is able to emulate all ldw instructions, but it fails if it fails to read the source e.g. because of page fault. The following program reproduces the problem: #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/mman.h> int main(void) { /* allocate 8k */ char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); /* free second half (upper 4k) and make it invalid. */ munmap(ptr+4096, 4096); /* syscall where first int is unaligned and clobbers into invalid memory region */ /* syscall should return EFAULT */ return syscall(__NR_clock_adjtime, 0, ptr+4095); } To fix this issue we simply need to check if the faulting instruction address is in the exception fixup table when the unaligned handler failed. If it is, call the fixup routine instead of crashing. While looking at the unaligned handler I found another issue as well: The target register should not be modified if the handler was unsuccessful. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
-
Helge Deller authored
Avoid showing invalid printk time stamps during boot. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-
- 04 Jun, 2016 3 commits
-
-
Mikulas Patocka authored
This patch fixes backtrace on PA-RISC There were several problems: 1) The code that decodes instructions handles instructions that subtract from the stack pointer incorrectly. If the instruction subtracts the number X from the stack pointer the code increases the frame size by (0x100000000-X). This results in invalid accesses to memory and recursive page faults. 2) Because gcc reorders blocks, handling instructions that subtract from the frame pointer is incorrect. For example, this function int f(int a) { if (__builtin_expect(a, 1)) return a; g(); return a; } is compiled in such a way, that the code that decreases the stack pointer for the first "return a" is placed before the code for "g" call. If we recognize this decrement, we mistakenly believe that the frame size for the "g" call is zero. To fix problems 1) and 2), the patch doesn't recognize instructions that decrease the stack pointer at all. To further safeguard the unwind code against nonsense values, we don't allow frame size larger than Total_frame_size. 3) The backtrace is not locked. If stack dump races with module unload, invalid table can be accessed. This patch adds a spinlock when processing module tables. Note, that for correct backtrace, you need recent binutils. Binutils 2.18 from Debian 5 produce garbage unwind tables. Binutils 2.21 work better (it sometimes forgets function frames, but at least it doesn't generate garbage). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of ARM drivers got into the fixes vibe this time around, so this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only so many combos of hlcd), mediatek and omap drm. Other than that there is one mgag200 fix and a few core drm regression fixes" * tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/omap: fix unused variable warning. drm: hdlcd: Add information about the underlying framebuffers in debugfs drm: hdlcd: Cleanup the atomic plane operations drm/hdlcd: Fix up crtc_state->event handling drm: hdlcd: Revamp runtime power management drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister drm/mediatek: mtk_dpi: remove invalid error message drm: atmel-hlcdc: fix a NULL check drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation drm/mgag200: Black screen fix for G200e rev 4 drm: Wrap direct calls to driver->gem_free_object from CMA drm: fix fb refcount issue with atomic modesetting drm: make drm_atomic_set_mode_prop_for_crtc() more reliable drm/sti: remove extra mode fixup drm: add missing drm_mode_set_crtcinfo call drm/omap: include gpio/consumer.h where needed drm/omap: include linux/seq_file.h where needed Revert "drm/omap: no need to select OMAP2_DSS" drm/omap: Remove regulator API abuse OMAPDSS: HDMI5: Change DDC timings ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: "Fix irqfd shutdown ordering, build warning, and VPD short read" * tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio: vfio/pci: Allow VPD short read vfio/type1: Fix build warning vfio/pci: Fix ordering of eventfd vs virqfd shutdown
-