- 05 Dec, 2011 14 commits
-
-
Konrad Rzeszutek Wilk authored
Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [<c01abc54>] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[<c01abc54>] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [<c01ac222>] ? __swap_duplicate+0xc2/0x160 [<c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0 [<c01ac2e4>] ? swap_duplicate+0x14/0x40 [<c01a0a6b>] ? copy_pte_range+0x45b/0x500 [<c01a0ca5>] ? copy_page_range+0x195/0x200 [<c01328c6>] ? dup_mmap+0x1c6/0x2c0 [<c0132cf8>] ? dup_mm+0xa8/0x130 [<c013376a>] ? copy_process+0x98a/0xb30 [<c013395f>] ? do_fork+0x4f/0x280 [<c01573b3>] ? getnstimeofday+0x43/0x100 [<c010f770>] ? sys_clone+0x30/0x40 [<c06c048d>] ? ptregs_clone+0x15/0x48 [<c06bfb71>] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe99 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
-
Peter Chubb authored
Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: Uroš Vampl <mobile.leecher@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Ajaykumar Hotchandani authored
Following is from Notes of section 11.5.3 of Intel processor manual available at: http://www.intel.com/Assets/PDF/manual/325384.pdf For the Pentium 4 and Intel Xeon processors, after the sequence of steps given above has been executed, the cache lines containing the code between the end of the WBINVD instruction and before the MTRRS have actually been disabled may be retained in the cache hierarchy. Here, to remove code from the cache completely, a second WBINVD instruction must be executed after the MTRRs have been disabled. This patch provides resolution for that. Ideally, I will like to make changes only for Pentium 4 and Xeon processors. But, I am not finding easier way to do it. And, extra wbinvd() instruction does not hurt much for other processors. Signed-off-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Borislav Petkov authored
Recently, I got bitten by using rdmsr_safe too early in the boot process. Document its shortcomings for future reference. Link: http://lkml.kernel.org/r/4ED5B70F.606@lwfinger.netSigned-off-by: Borislav Petkov <borislav.petkov@amd.com>
-
Srivatsa S. Bhat authored
The microcode update driver's initialization code does not handle failures correctly. This patch fixes this issue. Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20111107123530.12164.31227.stgit@srivatsabhat.in.ibm.com Link: http://lkml.kernel.org/r/4ED8E2270200007800065120@nat28.tlf.novell.comSigned-off-by: Borislav Petkov <borislav.petkov@amd.com>
-
Prarit Bhargava authored
TAINT_FIRMWARE_WORKAROUND should be set when an MTRR fixup is done. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1318958650-12447-1-git-send-email-prarit@redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Bjorn Helgaas authored
In commit f8924e77 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494Reported-bisected-and-tested-by: Dan McGrath <troubledaemon@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # 2.6.26+ Cc: Dan McGrath <troubledaemon@gmail.com> Cc: Alexey Starikovskiy <aystarik@gmail.com> [jrnieder@gmail.com: clarified commit message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.netSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Feng Tang authored
In latest firmware's SFI tables, pmic_gpio has been set to IPC type of device, so we need handle it too. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Jekyll Lai authored
Add SFI glue for the following devices: tca6416: a gpio expander compatible with max7315 mpu3050: gyro sensor Both of these actual drivers are already upstream Signed-off-by: Jekyll Lai <jekyll_lai@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Jacob Pan authored
On the Intel MID devices SCU commands are issued to manage power off and the like. We need to issue different ones for non-Lincroft based devices. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Rafael J. Wysocki authored
Dell OptiPlex 990 is known to require PCI reboot, so add it to the reboot blacklist in pci_reboot_dmi_table[]. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/201111160019.51303.rjw@sisk.plSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Jack Steiner authored
There was a mixup when the SGI UV2 hub chip was sent to be fabricated, and it ended up with the wrong part number in the HRP_NODE_ID mmr. Future versions of the chip will (may) have the correct part number. Change the UV infrastructure to recognize both part numbers as valid IDs of a UV2 hub chip. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Mitsuo Hayasaka authored
The kernel stack overflow is checked in stack_overflow_check(), which may wrongly detect the overflow if the stack pointer in user space points to the kernel stack intentionally or accidentally. So, the actual overflow is never detected after this misdetection because WARN_ONCE() is used on the detection of it. This patch adds user-mode-vm checking before it to avoid this problem and bails out early if the user stack is used. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Randy Dunlap <rdunlap@xenotime.net> Link: http://lkml.kernel.org/r/20111129060821.11076.55315.stgit@ltc219.sdl.hitachi.co.jpSigned-off-by: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
- 04 Dec, 2011 1 commit
-
-
Linus Torvalds authored
People with old AMD chips are getting hung boots, because commit bcb80e53 ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") moved the microcode detection too early into "early_init_amd()". At that point we are *so* early in the booth that the exception tables haven't even been set up yet, so the whole rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); doesn't actually work: if the rdmsr does a GP fault (due to non-existant MSR register on older CPU's), we can't fix it up yet, and the boot fails. Fix it by simply moving the code to a slightly later point in the boot (init_amd() instead of early_init_amd()), since the kernel itself doesn't even really care about the microcode patchlevel at this point (or really ever: it's made available to user space in /proc/cpuinfo, and updated if you do a microcode load). Reported-tested-and-bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Bob Tracy <rct@gherkin.frus.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 03 Dec, 2011 1 commit
-
-
Konrad Rzeszutek Wilk authored
The idea behind commit d91ee586 ("cpuidle: replace xen access to x86 pm_idle and default_idle") was to have one call - disable_cpuidle() which would make pm_idle not be molested by other code. It disallows cpuidle_idle_call to be set to pm_idle (which is excellent). But in the select_idle_routine() and idle_setup(), the pm_idle can still be set to either: amd_e400_idle, mwait_idle or default_idle. This depends on some CPU flags (MWAIT) and in AMD case on the type of CPU. In case of mwait_idle we can hit some instances where the hypervisor (Amazon EC2 specifically) sets the MWAIT and we get: Brought up 2 CPUs invalid opcode: 0000 [#1] SMP Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1 RIP: e030:[<ffffffff81015d1d>] [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4 ... Call Trace: [<ffffffff8100e2ed>] cpu_idle+0xae/0xe8 [<ffffffff8149ee78>] cpu_bringup_and_idle+0xe/0x10 RIP [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4 RSP <ffff8801d28ddf10> In the case of amd_e400_idle we don't get so spectacular crashes, but we do end up making an MSR which is trapped in the hypervisor, and then follow it up with a yield hypercall. Meaning we end up going to hypervisor twice instead of just once. The previous behavior before v3.0 was that pm_idle was set to default_idle regardless of select_idle_routine/idle_setup. We want to do that, but only for one specific case: Xen. This patch does that. Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Dec, 2011 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) usb: ftdi_sio: add PID for Propox ISPcable III Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring() usb: gadget: fsl_udc: fix dequeuing a request in progress usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type usb: fsl_mxc_udc.c: Fix build issue by including missing header file USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER usb: udc: Fix gadget driver's speed check in various UDC drivers usb: gadget: fix g_serial regression usb: renesas_usbhs: fixup driver speed usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop. usb: renesas_usbhs: fixup signal the driver that cable was disconnected usb: renesas_usbhs: fixup device_register timing usb: musb: PM: fix context save/restore in suspend/resume path USB: linux-cdc-acm.inf: add support for the acm_ms gadget EHCI : Fix a regression in the ISO scheduler xHCI: reset-on-resume quirk for NEC uPD720200 USB: whci-hcd: fix endian conversion in qset_clear() USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 usb: option: add SIMCom SIM5218 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: comedi: fix integer overflow in do_insnlist_ioctl() Revert "Staging: comedi: integer overflow in do_insnlist_ioctl()" Staging: comedi: integer overflow in do_insnlist_ioctl() Staging: comedi: fix signal handling in read and write Staging: comedi: fix mmap_count staging: comedi: fix oops for USB DAQ devices. staging: comedi: usbduxsigma: Fixed wrong range for the analogue channel. staging:rts_pstor:Complete scanning_done variable staging: usbip: bugfix for deadlock
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix attr2 vs large data fork assert xfs: force buffer writeback before blocking on the ilock in inode reclaim xfs: validate acl count
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Correct General touch PID
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: integer overflow in vmw_kms_update_layout_ioctl() drm/radeon/kms: fix 2D tiling CS support on EG/CM drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CM drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL) drm/radeon/kms: add some new pci ids drm/radeon/kms: Skip ACPI call to ATIF when possible drm/radeon/kms: Hide debugging message drm/radeon/kms: add some loop timeouts in pageflip code drm/nv50/disp: silence compiler warning drm/nouveau: fix oopses caused by clear being called on unpopulated ttms drm/nouveau: Keep RAMIN heap within the channel. drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations drm/nvc0/gr: fix TP init for transform feedback offset queries drm/nouveau: add dumb ioctl support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED ALSA: hda_intel - revert a quirk that affect VIA chipsets ALSA: hda - Avoid touching mute-VREF pin for IDT codecs firmware: Sigma: Fix endianess issues firmware: Sigma: Skip header during CRC generation firmware: Sigma: Prevent out of bounds memory access ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer ASoC: Supply dcs_codes for newer WM1811 revisions ASoC: Error out if we can't generate a LRCLK at all for WM8994 ASoC: Correct name of Speyside Main Speaker widget ASoC: skip resume of soc-audio devices without codecs ASoC: cs42l51: Fix off-by-one for reg_cache_size ASoC: drop support for PlayPaq with WM8510 ASoC: mpc8610: tell the CS4270 codec that it's the master ASoC: cs4720: use snd_soc_cache_sync() ASoC: SAMSUNG: Fix build error ASoC: max9877: Update register if either val or val2 is changed ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET
-
Xi Wang authored
There are two issues in vmw_kms_update_layout_ioctl(). First, the for loop forgets to index rects and only checks the first element. Second, there is a potential integer overflow if userspace passes in a large arg->num_outputs. The call to kzalloc() would allocate a small buffer, leading to out-of-bounds read. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
Disabling the CRTC by setting its framebuffer to NULL, as used by drm_framebuffer_cleanup(), was failing to pass the current framebuffer to the crtc_func->disable callback. This is because of the dance within drm_crtc_helper_set_config to pass the new_fb (NULL in this case) to the drm_crtc_helper_set_mode with the currently attached fb as a parameter. drm_crtc_helper_set_mode treats this as a no-op and the encoder is still enabled. And so the current fb is forgotten before the call to drm_helper_disable_unused_functions. This patch treats disabling the CRTC as a simple special case rather than adding further complexity into the configuration logic. This fixes a pin-leak of the fb bo on Xserver close. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS ipv4: flush route cache after change accept_local sch_red: fix red_change Revert "udp: remove redundant variable" bridge: master device stuck in no-carrier state forever when in user-stp mode ipv4: Perform peer validation on cached route lookup. net/core: fix rollback handler in register_netdevice_notifier sch_red: fix red_calc_qavg_from_idle_time bonding: only use primary address for ARP ipv4: fix lockdep splat in rt_cache_seq_show sch_teql: fix lockdep splat net: fec: Select the FEC driver by default for i.MX SoCs isdn: avoid copying too long drvid isdn: make sure strings are null terminated netlabel: Fix build problems when IPv6 is not enabled sctp: better integer overflow check in sctp_auth_create_key() sctp: integer overflow in sctp_auth_create_key() ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. net: Fix corruption in /proc/*/net/dev_mcast mac80211: fix race between the AGG SM and the Tx data path ...
-
David S. Miller authored
firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Dec, 2011 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits) ocfs2: avoid unaligned access to dqc_bitmap ocfs2: Use filemap_write_and_wait() instead of write_inode_now() ocfs2: honor O_(D)SYNC flag in fallocate ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 ocfs2: send correct UUID to cleancache initialization ocfs2: Commit transactions in error cases -v2 ocfs2: make direntry invalid when deleting it fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free ocfs2: Avoid livelock in ocfs2_readpage() ocfs2: serialize unaligned aio ocfs2: Implement llseek() ocfs2: Fix ocfs2_page_mkwrite() ocfs2: Add comment about orphan scanning ocfs2: Clean up messages in the fs ocfs2/cluster: Cluster up now includes network connections too ocfs2/cluster: Add new function o2net_fill_node_map() ocfs2/cluster: Fix output in file elapsed_time_in_ms ocfs2/dlm: dlmlock_remote() needs to account for remastery ocfs2/dlm: Take inflight reference count for remotely mastered resources too ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() ...
-
Akinobu Mita authored
The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Joel Becker <jlbec@evilplan.org>
-
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-armLinus Torvalds authored
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
-
David S. Miller authored
This reverts commit 81d54ec8. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: paul bilke <fsmail@conspiracy.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Kroah-Hartman authored
Merge branch 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: Revert "xHCI: reset-on-resume quirk for NEC uPD720200" xHCI: fix bug in xhci_clear_command_ring()
-
Vitalii Demianets authored
When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcin Kościelnicki authored
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
This reverts commit df711fc9. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9 was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com>
-
David S. Miller authored
Otherwise we won't notice the peer GENID change. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-