Skip to content

L
linux
Switch branch/tag
  1. 22 May, 2019 35 commits
  3. 16 May, 2019 5 commits
    • Greg Kroah-Hartman's avatar
      Linux 5.1.3 · 7cb9c5d3
      Greg Kroah-Hartman authored
      7cb9c5d3
    • Damien Le Moal's avatar
      f2fs: Fix use of number of devices · dabb99e0
      Damien Le Moal authored 
      commit 0916878d upstream.

For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.

However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.

Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.

Fixes: 7bb3a371 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: default avatarChao Yu <yuchao0@huawei.com>
Signed-off-by: default avatarJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dabb99e0
    • Dexuan Cui's avatar
      PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary · d82e3d5b
      Dexuan Cui authored 
      commit 340d4556 upstream.

When we hot-remove a device, usually the host sends us a PCI_EJECT message,
and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

When we execute the quick hot-add/hot-remove test, the host may not send
us the PCI_EJECT message if the guest has not fully finished the
initialization by sending the PCI_RESOURCES_ASSIGNED* message to the
host, so it's potentially unsafe to only depend on the
pci_destroy_slot() in hv_eject_device_work() because the code path

create_root_hv_pci_bus()
 -> hv_pci_assign_slots()

is not called in this case. Note: in this case, the host still sends the
guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

In the quick hot-add/hot-remove test, we can have such a race before
the code path

pci_devices_present_work()
 -> new_pcichild_device()

adds the new device into the hbus->children list, we may have already
received the PCI_EJECT message, and since the tasklet handler

hv_pci_onchannelcallback()

may fail to find the "hpdev" by calling

get_pcichild_wslot(hbus, dev_message->wslot.slot)

hv_pci_eject_device() is not called; Later, by continuing execution

create_root_hv_pci_bus()
 -> hv_pci_assign_slots()

creates the slot and the PCI_BUS_RELATIONS message with
bus_rel->device_count == 0 removes the device from hbus->children, and
we end up being unable to remove the slot in

hv_pci_remove()
 -> hv_pci_remove_slots()

Remove the slot in pci_devices_present_work() when the device
is removed to address this race.

pci_devices_present_work() and hv_eject_device_work() run in the
singled-threaded hbus->wq, so there is not a double-remove issue for the
slot.

We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback()
to the workqueue, because we need the hv_pci_onchannelcallback()
synchronously call hv_pci_eject_device() to poll the channel
ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue
fixed in commit de0aa7b2 ("PCI: hv: Fix 2 hang issues in
hv_compose_msi_msg()")

Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: rewritten commit log]
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: default avatarStephen Hemminger <stephen@networkplumber.org>
Reviewed-by: default avatarMichael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d82e3d5b
    • Dexuan Cui's avatar
      PCI: hv: Add hv_pci_remove_slots() when we unload the driver · 5c36f434
      Dexuan Cui authored 
      commit 15becc2b upstream.

When we unload the pci-hyperv host controller driver, the host does not
send us a PCI_EJECT message.

In this case we also need to make sure the sysfs PCI slot directory is
removed, otherwise a command on a slot file eg:

"cat /sys/bus/pci/slots/2/address"

will trigger a

"BUG: unable to handle kernel paging request"

and, if we unload/reload the driver several times we would end up with
stale slot entries in PCI slot directories in /sys/bus/pci/slots/

root@localhost:~# ls -rtl  /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb  7 10:49 2
drwxr-xr-x 2 root root 0 Feb  7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb  7 10:51 2-2

Add the missing code to remove the PCI slot and fix the current
behaviour.

Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: reformatted the log]
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: default avatarStephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: default avatarMichael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5c36f434
    • Dexuan Cui's avatar
      PCI: hv: Fix a memory leak in hv_eject_device_work() · 91425cbe
      Dexuan Cui authored 
      commit 05f151a7 upstream.

When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().

Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: default avatarStephen Hemminger <stephen@networkplumber.org>
Reviewed-by: default avatarMichael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      91425cbe
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7