- 28 Jun, 2020 1 commit
-
-
Miaohe Lin authored
We can't cast sk_buff to rtable by (struct rtable *)hint. Use skb_rtable(). Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2020 3 commits
-
-
Claudiu Manoil authored
The rings bitmap of an interrupt vector encodes which of the device's rings were assigned to that interrupt vector. Hence the iteration range of the tx rings bitmap (for_each_set_bit()) should be the total number of Tx rings of that netdevice instead of the number of rings assigned to the interrupt vector. Since there are 2 cores, and one interrupt vector for each core, the number of rings asigned to an interrupt vector is half the number of available rings. The impact of this error is that the upper half of the tx rings could still generate interrupts during napi polling. Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Shannon Nelson authored
Let the network stack know the real number of queues that we are using. v2: added error checking Fixes: 49d3b493 ("ionic: disable the queues on link down") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen. 2) The default crypto algorithm selection in Kconfig for IPSEC is out of touch with modern reality, fix this up. From Eric Biggers. 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii Nakryiko. 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from Hangbin Liu. 5) Adjust packet alignment handling in ax88179_178a driver to match what the hardware actually does. From Jeremy Kerr. 6) register_netdevice can leak in the case one of the notifiers fail, from Yang Yingliang. 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo. 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir Oltean. 9) tg3 driver can sleep forever when we get enough EEH errors, fix from David Christensen. 10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet drivers, from Ciara Loftus. 11) Fix scanning loop break condition in of_mdiobus_register(), from Florian Fainelli. 12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon. 13) Endianness fix in mlxsw, from Ido Schimmel. 14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen. 15) Missing bridge mrp configuration validation, from Horatiu Vultur. 16) Fix circular netns references in wireguard, from Jason A. Donenfeld. 17) PTP initialization on recovery is not done properly in qed driver, from Alexander Lobakin. 18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong, from Rahul Lakkireddy. 19) Don't clear bound device TX queue of socket prematurely otherwise we get problems with ktls hw offloading, from Tariq Toukan. 20) ipset can do atomics on unaligned memory, fix from Russell King. 21) Align ethernet addresses properly in bridging code, from Thomas Martitz. 22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set, from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits) rds: transport module should be auto loaded when transport is set sch_cake: fix a few style nits sch_cake: don't call diffserv parsing code when it is not needed sch_cake: don't try to reallocate or unshare skb unconditionally ethtool: fix error handling in linkstate_prepare_data() wil6210: account for napi_gro_receive never returning GRO_DROP hns: do not cast return value of napi_gro_receive to null socionext: account for napi_gro_receive never returning GRO_DROP wireguard: receive: account for napi_gro_receive never returning GRO_DROP vxlan: fix last fdb index during dump of fdb with nhid sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket tc-testing: avoid action cookies with odd length. bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT net: dsa: sja1105: fix tc-gate schedule with single element net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules net: dsa: sja1105: unconditionally free old gating config net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top net: macb: free resources on failure path of at91ether_open() net: macb: call pm_runtime_put_sync on failure path ...
-
- 25 Jun, 2020 36 commits
-
-
Rao Shoaib authored
This enhancement auto loads transport module when the transport is set via SO_RDS_TRANSPORT socket option. Reviewed-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by:
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Signed-off-by:
-
David S. Miller authored
Toke Høiland-Jørgensen says: ==================== sched: A couple of fixes for sch_cake This series contains a couple of fixes for diffserv handling in sch_cake that provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end). Not quite sure about whether this should go to stable; it does provide a nice speedup, but it's not strictly a fix in the "correctness" sense. I lean towards including this in stable as well, since our most important consumer of that (OpenWrt) is likely to backport the series anyway. ==================== Signed-off-by: -
Toke Høiland-Jørgensen authored
I spotted a few nits when comparing the in-tree version of sch_cake with the out-of-tree one: A redundant error variable declaration shadowing an outer declaration, and an indentation alignment issue. Fix both of these. Fixes: 046f6fd5 ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
As a further optimisation of the diffserv parsing codepath, we can skip it entirely if CAKE is configured to neither use diffserv-based classification, nor to zero out the diffserv bits. Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by:
-
Ilya Ponetayev authored
cake_handle_diffserv() tries to linearize mac and network header parts of skb and to make it writable unconditionally. In some cases it leads to full skb reallocation, which reduces throughput and increases CPU load. Some measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable() reallocates skb, if skb was allocated in ethernet driver via so-called 'build skb' method from page cache (it was discovered by strange increase of kmalloc-2048 slab at first). Obtain DSCP value via read-only skb_header_pointer() call, and leave linearization only for DSCP bleaching or ECN CE setting. And, as an additional optimisation, skip diffserv parsing entirely if it is not needed by the current configuration. Fixes: c87b4ecd ("sch_cake: Make sure we can write the IP header before changing DSCP bits") Signed-off-by:
Ilya Ponetayev <i.ponetaev@ndmsystems.com> [ fix a few style issues, reflow commit message ] Signed-off-by:
-
Michal Kubecek authored
When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we must not return without calling ethnl_ops_complete(dev) as that could result in imbalance between ethtool_ops ->begin() and ->complete() calls. Fixes: 80660219 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Four small fixes: - Fix a ringbuffer bug for nested events having time go backwards - Fix a config dependency for boot time tracing to depend on synthetic events instead of histograms. - Fix trigger format parsing to handle multiple spaces - Fix bootconfig to handle failures in multiple events" * tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/boottime: Fix kprobe multiple events tracing: Fix event trigger to accept redundant spaces tracing/boot: Fix config dependency for synthedic event ring-buffer: Zero out time extend if it is nested and not absolute -
David S. Miller authored
Jason A. Donenfeld says: ==================== napi_gro_receive caller return value cleanups In 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()"), the GRO_NORMAL case stopped calling netif_receive_skb_internal, checking its return value, and returning GRO_DROP in case it failed. Instead, it calls into netif_receive_skb_list_internal (after a bit of indirection), which doesn't return any error. Therefore, napi_gro_receive will never return GRO_DROP, making handling GRO_DROP dead code. I emailed the author of 6570bc79 on netdev [1] to see if this change was intentional, but the dlink.ru email address has been disconnected, and looking a bit further myself, it seems somewhat infeasible to start propagating return values backwards from the internal machinations of netif_receive_skb_list_internal. Taking a look at all the callers of napi_gro_receive, it appears that three are checking the return value for the purpose of comparing it to the now never-happening GRO_DROP, and one just casts it to (void), a likely historical leftover. Every other of the 120 callers does not bother checking the return value. And it seems like these remaining 116 callers are doing the right thing: after calling napi_gro_receive, the packet is now in the hands of the upper layers of the newtworking, and the device driver itself has no business now making decisions based on what the upper layers choose to do. Incrementing stats counters on GRO_DROP seems like a mistake, made by these three drivers, but not by the remaining 117. It would seem, therefore, that after rectifying these four callers of napi_gro_receive, that I should go ahead and just remove returning the value from napi_gro_receive all together. However, napi_gro_receive has a function event tracer, and being able to introspect into the networking stack to see how often napi_gro_receive is returning whatever interesting GRO status (aside from _DROP) remains an interesting data point worth keeping for debugging. So, this series simply gets rid of the return value checking for the four useless places where that check never evaluates to anything meaningful. [1] https://lore.kernel.org/netdev/20200624210606.GA1362687@zx2c4.com/ ==================== Acked-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Jason A. Donenfeld authored
The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. In this case, too, the non-gro path didn't bother checking the return value. Plus, this had some clunky debugging functions that duplicated code from elsewhere and was generally pretty messy. So, this commit cleans that all up too. Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
Basically no drivers care about the return value here, and there's no __must_check that would make casting to void sensible, so remove it. Signed-off-by:
-
Jason A. Donenfeld authored
The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by:
-
Jason A. Donenfeld authored
The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by:
-
Roopa Prabhu authored
This patch fixes last saved fdb index in fdb dump handler when handling fdb's with nhid. Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by:
-
Briana Oursler authored
Update odd length cookie hexstrings in csum.json, tunnel_key.json and bpf.json to be even length to comply with check enforced in commit 0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2. Signed-off-by:Briana Oursler <briana.oursler@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
David S. Miller authored
Neal Cardwell says: ==================== tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease This series fixes a long-standing bug in the TCP CUBIC HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The code can cause a spurious exit of slow start in some particular cases: upon an RTT decrease that happens on the 9th or later ACK in a round trip. This series fixes the original Hystart code and also the recent BPF implementation. ==================== Signed-off-by: -
Neal Cardwell authored
Apply the fix from: "tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT" to the BPF implementation of TCP CUBIC congestion control. Repeating the commit description here for completeness: Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: 6de4a9c4 ("bpf: tcp: Add bpf_cubic example") Reported-by:
Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Neal Cardwell authored
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an ACK when the minimum rtt of a connection goes down. From inspection it is clear from the existing code that this could happen in an example like the following: o The first 8 RTT samples in a round trip are 150ms, resulting in a curr_rtt of 150ms and a delay_min of 150ms. o The 9th RTT sample is 100ms. The curr_rtt does not change after the first 8 samples, so curr_rtt remains 150ms. But delay_min can be lowered at any time, so delay_min falls to 100ms. The code executes the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min of 100ms, and the curr_rtt is declared far enough above delay_min to force a (spurious) exit of Slow start. The fix here is simple: allow every RTT sample in a round trip to lower the curr_rtt. Fixes: ae27e98a ("[TCP] CUBIC v2.3") Reported-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA tc-gate action This small series fixes 2 bugs in the tc-gate implementation: 1. The TAS state machine keeps getting rescheduled even after removing tc-gate actions on all ports. 2. tc-gate actions with only one gate control list entry are installed to hardware with an incorrect interval of zero, which makes the switch erroneously drop those packets (since the configuration is invalid). To keep the code palatable, a forward-declaration was avoided by moving some code around in patch 1/4. I hope that isn't too much of an issue. ==================== Signed-off-by: -
Vladimir Oltean authored
The sja1105_gating_cfg_time_to_interval function does this, as per the comments: /* The gate entries contain absolute times in their e->interval field. Convert * that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5"). */ To perform that task, it iterates over gating_cfg->entries, at each step updating the interval of the _previous_ entry. So one interval remains to be updated at the end of the loop: the last one (since it isn't "prev" for anyone else). But there was an erroneous check, that the last element's interval should not be updated if it's also the only element. I'm not quite sure why that check was there, but it's clearly incorrect, as a tc-gate schedule with a single element would get an e->interval of zero, regardless of the duration requested by the user. The switch wouldn't even consider this configuration as valid: it will just drop all traffic that matches the rule. Fixes: 834f8933 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Reported-by:
Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Currently, tas_data->enabled would remain true even after deleting all tc-gate rules from the switch ports, which would cause the sja1105_tas_state_machine to get unnecessarily scheduled. Also, if there were any errors which would prevent the hardware from enabling the gating schedule, the sja1105_tas_state_machine would continuously detect and print that, spamming the kernel log, even if the rules were subsequently deleted. The rules themselves are _not_ active, because sja1105_init_scheduling does enough of a job to not install the gating schedule in the static config. But the virtual link rules themselves are still present. So call the functions that remove the tc-gate configuration from priv->tas_data.gating_cfg, so that tas_data->enabled can be set to false, and sja1105_tas_state_machine will stop from being scheduled. Fixes: 834f8933 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by:
-
Vladimir Oltean authored
Currently sja1105_compose_gating_subschedule is not prepared to be called for the case where we want to recompute the global tc-gate configuration after we've deleted those actions on a port. After deleting the tc-gate actions on the last port, max_cycle_time would become zero, and that would incorrectly prevent sja1105_free_gating_config from getting called. So move the freeing function above the check for the need to apply a new configuration. Fixes: 834f8933 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by:
-
Vladimir Oltean authored
It turns out that sja1105_compose_gating_subschedule must also be called from sja1105_vl_delete, to recalculate the overall tc-gate configuration. Currently this is not possible without introducing a forward declaration. So move the function at the top of the file, along with its dependencies. Signed-off-by:
-
Claudiu Beznea authored
DMA buffers were not freed on failure path of at91ether_open(). Along with changes for freeing the DMA buffers the enable/disable interrupt instructions were moved to at91ether_start()/at91ether_stop() functions and the operations on at91ether_stop() were done in their reverse order (compared with how is done in at91ether_start()): before this patch the operation order on interface open path was as follows: 1/ alloc DMA buffers 2/ enable tx, rx 3/ enable interrupts and the order on interface close path was as follows: 1/ disable tx, rx 2/ disable interrupts 3/ free dma buffers. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Claudiu Beznea authored
Call pm_runtime_put_sync() on failure path of at91ether_open. Fixes: e6a41c23 ("net: macb: ensure interface is not suspended on at91rm9200") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify fixlet from Jan Kara: "A performance improvement to reduce impact of fsnotify for inodes where it isn't used" * tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fs: Do not check if there is a fsnotify watcher on pseudo inodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net, they are: 1) Unaligned atomic access in ipset, from Russell King. 2) Missing module description, from Rob Gill. 3) Patches to fix a module unload causing NULL pointer dereference in xtables, from David Wilder. For the record, I posting here his cover letter explaining the problem: A crash happened on ppc64le when running ltp network tests triggered by "rmmod iptable_mangle". See previous discussion in this thread: https://lists.openwall.net/netdev/2020/06/03/161 . In the crash I found in iptable_mangle_hook() that state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference. net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and called when ip_mangle modules is unloaded. A rmmod task was found running in the crash dump. A 2nd crash showed the same problem when running "rmmod iptable_filter" (net->ipv4.iptable_filter=NULL). To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will un-register the underlying hook and exit would do the table freeing. The netns core does an unconditional +synchronize_rcu after the pre_exit hooks insuring no packets are in flight that have picked up the pointer before completing the un-register. These patches include changes for both iptables and ip6tables. We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a loop for 72 hours. 4) Add a selftest for conntrack helper assignment, from Florian Westphal. ==================== Signed-off-by: -
Thomas Martitz authored
The eth_addr member is passed to ether_addr functions that require 2-byte alignment, therefore the member must be properly aligned to avoid unaligned accesses. The problem is in place since the initial merge of multicast to unicast: commit 6db6f0ea bridge: multicast to unicast Fixes: 6db6f0ea ("bridge: multicast to unicast") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by:
Thomas Martitz <t.martitz@avm.de> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Several regression fixes from work that landed in the merge window, particularly in the mlx5 driver: - Various static checker and warning fixes - General bug fixes in rvt, qedr, hns, mlx5 and hfi1 - Several regression fixes related to the ECE and QP changes in last cycle - Fixes for a few long standing crashers in CMA, uverbs ioctl, and xrc" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits) IB/hfi1: Add atomic triggered sleep/wakeup IB/hfi1: Correct -EBUSY handling in tx code IB/hfi1: Fix module use count flaw due to leftover module put calls IB/hfi1: Restore kfree in dummy_netdev cleanup IB/mad: Fix use after free when destroying MAD agent RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata RDMA/counter: Query a counter before release RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() RDMA/mlx5: Fix integrity enabled QP creation RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs RDMA/mlx5: Fix remote gid value in query QP RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path RDMA/core: Check that type_attrs is not NULL prior access RDMA/hns: Fix an cmd queue issue when resetting RDMA/hns: Fix a calltrace when registering MR from userspace RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake RDMA/cma: Protect bind_list and listen_list while finding matching cm id RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532 RDMA/efa: Set maximum pkeys device attribute RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq ... -
Denis Kirjanov authored
there is a problem with the CWR flag set in an incoming ACK segment and it leads to the situation when the ECE flag is latched forever the following packetdrill script shows what happens: // Stack receives incoming segments with CE set +0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535 +0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535 +0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535 // Stack repsonds with ECN ECHO +0.0 >[noecn] . 1001:1001(0) ack 12001 +0.0 >[noecn] E. 1001:1001(0) ack 13001 +0.0 >[noecn] E. 1001:1001(0) ack 14001 // Write a packet +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] PE. 1001:2001(1000) ack 14001 // Pure ACK received +0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535 // Since CWR was sent, this packet should NOT have ECE set +0.1 write(3, ..., 1000) = 1000 +0.0 >[ect0] P. 2001:3001(1000) ack 14001 // but Linux will still keep ECE latched here, with packetdrill // flagging a missing ECE flag, expecting // >[ect0] PE. 2001:3001(1000) ack 14001 // in the script In the situation above we will continue to send ECN ECHO packets and trigger the peer to reduce the congestion window. To avoid that we can check CWR on pure ACKs received. v3: - Add a sequence check to avoid sending an ACK to an ACK v2: - Adjusted the comment - move CWR check before checking for unacknowledged packets Signed-off-by:
Denis Kirjanov <denis.kirjanov@suse.com> Acked-by:
-
Ard Biesheuvel authored
The skcipher API dynamically instantiates the transformation object on request that implements the requested algorithm optimally on the given platform. This notion of optimality only matters for cases like bulk network or disk encryption, where performance can be a bottleneck, or in cases where the algorithm itself is not known at compile time. In the mscc case, we are dealing with AES encryption of a single block, and so neither concern applies, and we are better off using the AES library interface, which is lightweight and safe for this kind of use. Note that the scatterlist API does not permit references to buffers that are located on the stack, so the existing code is incorrect in any case, but avoiding the skcipher and scatterlist APIs entirely is the most straight-forward approach to fixing this. Cc: Antoine Tenart <antoine.tenart@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 28c5107a ("net: phy: mscc: macsec support") Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Fix kernel crash on system call single stepping. - Make sure early program check handler is executed with DAT on to avoid an endless program check loop. - Add __GFP_NOWARN flag to debug feature to avoid user triggerable allocation failure messages. * tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/debug: avoid kernel warning on too large number of pages s390/kasan: fix early pgm check handler execution s390: fix system call single stepping
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes gathered in the last two weeks. The major changes here are fixes for the recent DPCM regressions found on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC DAI registrations. Other than those are mostly device-specific fixes including the usual USB- and HD-audio quirks, and a fix for syzkaller case and ID updates for new Intel platforms" * tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits) ALSA: usb-audio: Fix OOB access of mixer element list ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG) ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S ASoC: rockchip: Fix a reference count leak. ASoC: amd: closing specific instance. ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL ASoC: hdac_hda: fix memleak with regmap not freed on remove ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H ASoC: SOF: Intel: add PCI ID for CometLake-S ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems ALSA: usb-audio: Fix potential use-after-free of streams ALSA: hda/realtek - Add quirk for MSI GE63 laptop ASoC: fsl_ssi: Fix bclk calculation for mono channel ASoC: SOF: Intel: hda: Clear RIRB status before reading WP ASoC: rt1015: Update rt1015 default register value according to spec modification. ASoC: qcom: common: set correct directions for dailinks ASoc: q6afe: add support to get port direction ASoC: soc-pcm: fix checks for multi-cpu FE dailinks ASoC: rt5682: Let dai clks be registered whether mclk exists or not ...
-
David S. Miller authored
Doug Berger says: ==================== net: bcmgenet: use hardware padding of runt frames Now that scatter-gather and tx-checksumming are enabled by default it revealed a packet corruption issue that can occur for very short fragmented packets. When padding these frames to the minimum length it is possible for the non-linear (fragment) data to be added to the end of the linear header in an SKB. Since the number of fragments is read before the padding and used afterward without reloading, the fragment that should have been consumed can be tacked on in place of part of the padding. The third commit in this set corrects this by removing the software padding and allowing the hardware to add the pad bytes if necessary. The first two commits resolve warnings observed by the kbuild test robot and are included here for simplicity of application. ==================== Signed-off-by: -
Doug Berger authored
When commit 474ea9ca ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd39913 ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9ca ("net: bcmgenet: correctly pad short packets") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
The 16-bit value that holds a short in network byte order should be declared as a restricted big endian type to allow type checks to succeed during assignment. Fixes: 3e370952 ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
