- 22 Aug, 2016 16 commits
-
-
Dan O'Donovan authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 0bd50d71 upstream. Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor series, a common lock must be used to prevent concurrent accesses across the 4 GPIO controllers managed by this driver. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information. Signed-off-by:
Dan O'Donovan <dan@emutex.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Loic Poulain authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 32b9ccbc upstream. gpiod_get_optional can return either ERR_PTR or NULL pointer. NULL case is not tested and then dereferenced later in desc_to_gpio. Fix this by using non optional version which returns ERR_PTR in any error case (this is not an optional gpio). Use the same non optional version for the host-wake gpio. Fixes: 765ea3ab ("Bluetooth: hci_intel: Retrieve host-wake IRQ") Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Andy Shevchenko authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 3dbd3212 upstream. The commit d56d6b3d ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d ("gpio: langwell: add Intel Merrifield support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Vignesh R authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit a246b819 upstream. NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 0058f087 upstream. When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit e51e4d8a upstream. When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe finishes with success but uses invalid (ERR_PTR) values. This leads to dereferencing of ERR_PTR stored under ourport->clk: 12c30000.serial: Controller clock not found (...) 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 Unable to handle kernel paging request at virtual address fffffdfb (clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128) (s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40) (uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c) (uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418) (s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0) (platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0) (driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c) (bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100) (__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c) (bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c) (deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328) (process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac) (worker_thread) from [<c0135320>] (kthread+0xd8/0xf4) (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to exit with failure but the s3c24xx_uart_port is left half-configured (e.g. port->mapbase is set, clk contains ERR_PTR). On next re-probe, the function s3c24xx_serial_init_port() will exit early with success because of configured port->mapbase and driver will use old values, including the ERR_PTR as clock. Fix this by cleaning the port->mapbase on error path so each re-probe will initialize all of the port settings. Fixes: 60e93575 ("serial: samsung: enable clock before clearing pending interrupts during init") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Bjorn Andersson authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 30acf549 upstream. For dm uarts in pio mode tx data is transferred to the fifo register 4 bytes at a time, but care is not taken when these 4 bytes spans the end of the xmit buffer so the loop might read up to 3 bytes past the buffer and then skip the actual data at the beginning of the buffer. Fix this by, analogous to the DMA case, make sure the chunk doesn't wrap the xmit buffer. Fixes: 3a878c43 ("tty: serial: msm: Add TX DMA support") Cc: Ivan Ivanov <iivanov.xz@gmail.com> Reported-by:
Frank Rowand <frowand.list@gmail.com> Reported-by:
Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
Andy Gross <andy.gross@linaro.org> Tested-by:
Frank Rowand <frank.rowand@am.sony.com> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 9113c2aa upstream. In smp_prepare_boot_cpu(), we invoke cpuinfo_store_boot_cpu to store the cpuinfo in a per-cpu ptr, before initialising the per-cpu offset for the boot CPU. This patch reorders the sequence to make sure we initialise the per-cpu offset before accessing the per-cpu area. Commit 4b998ff1 ("arm64: Delay cpuinfo_store_boot_cpu") fixed the issue where we modified the per-cpu area even before the kernel initialises the per-cpu areas, but failed to wait until the boot cpu updated it's offset. Fixes: 4b998ff1 ("arm64: Delay cpuinfo_store_boot_cpu") Cc: <stable@vger.kernel.org> # 4.4+ Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 2ce39ad1 upstream. Clearing PSTATE.D is one of the requirements for generating a debug exception. The arm64 booting protocol requires that PSTATE.D is set, since many of the debug registers (for example, the hw_breakpoint registers) are UNKNOWN out of reset and could potentially generate spurious, fatal debug exceptions in early boot code if PSTATE.D was clear. Once the debug registers have been safely initialised, PSTATE.D is cleared, however this is currently broken for two reasons: (1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall runs after SMP (and the scheduler) have been initialised, there is no guarantee that it is actually running on the boot CPU. In this case, the boot CPU is left with PSTATE.D set and is not capable of generating debug exceptions. (2) In a preemptible kernel, we may explicitly schedule on the IRQ return path to EL1. If an IRQ occurs with PSTATE.D set in the idle thread, then we may schedule the kthread_init thread, run the postcore_initcall to clear PSTATE.D and then context switch back to the idle thread before returning from the IRQ. The exception return path will then restore PSTATE.D from the stack, and set it again. This patch fixes the problem by moving the clearing of PSTATE.D earlier to proc.S. This has the desirable effect of clearing it in one place for all CPUs, long before we have to worry about the scheduler or any exception handling. We ensure that the previous reset of MDSCR_EL1 has completed before unmasking the exception, so that any spurious exceptions resulting from UNKNOWN debug registers are not generated. Without this patch applied, the kprobes selftests have been seen to fail under KVM, where we end up attempting to step the OOL instruction buffer with PSTATE.D set and therefore fail to complete the step. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
-
James Morse authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit e19a6ee2 upstream. If we take an exception while at EL1, the exception handler inherits the original context's addr_limit and PSTATE.UAO values. To be consistent always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This prevents accidental re-use of the original context's addr_limit. Based on a similar patch for arm from Russell King. Cc: <stable@vger.kernel.org> # 4.6- Acked-by:
James Morse <james.morse@arm.com> Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 4fdef698 upstream. This patch fixes an issue that the xfer_work() is possible to cause NULL pointer dereference if the usb cable is disconnected while data transfer is running. In such case, a gadget driver may call usb_ep_disable()) before xfer_work() is actually called. In this case, the usbhs_pkt_pop() will call usbhsf_fifo_unselect(), and then usbhs_pipe_to_fifo() in xfer_work() will return NULL. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Daniele Palmas authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 3c0415fa upstream. This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Konrad Leszczynski authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 9cad39fe upstream. commit f3af3651 ("usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers") ended up regressing Isochronous endpoints by clearing DWC3_EP_BUSY flag too early, which resulted in choppy audio playback over USB. Fix that by partially reverting original commit and making sure that we check for isochronous endpoints. Fixes: f3af3651 ("usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers") Signed-off-by:
Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by:
Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 15e4292a upstream. This patch fixes an issue that the CFIFOSEL register value is possible to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer using CFIFO may not work correctly. For example: # modprobe g_multi file=usb-storage.bin # ifconfig usb0 192.168.1.1 up (During the USB host is sending file to the mass storage) # ifconfig usb0 down In this case, since the u_ether.c may call usb_ep_enable() in eth_stop(), if the renesas_usbhs driver is also using CFIFO for mass storage, the mass storage may not work correctly. So, this patch adds usbhs_lock() and usbhs_unlock() calling in usbhsg_ep_enable() to protect CFIFOSEL register. This is because: - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock() Fixes: 97664a20 ("usb: renesas_usbhs: shrink spin lock area") Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit 0015f915 upstream. This loop is supposed to set all the .num[] values to -1 but it's off by one so it skips the first element and sets one element past the end of the array. I've cleaned up the loop a little as well. Fixes: ddf8abd2 ('USB: f_fs: the FunctionFS driver') Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Heinrich Schuchardt authored
BugLink: http://bugs.launchpad.net/bugs/1615620 commit ffeee83a upstream. Function in_rq_cur copies random bytes from the stack. Zero the memory instead. Fixes: 132fcb46 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
- 19 Aug, 2016 1 commit
-
-
Tobias Brunner authored
BugLink: http://bugs.launchpad.net/bugs/1613787 Whenever thresholds are changed the hash tables are rebuilt. This is done by enumerating all policies and hashing and inserting them into the right table according to the thresholds and direction. Because socket policies are also contained in net->xfrm.policy_all but no hash tables are defined for their direction (dir + XFRM_POLICY_MAX) this causes a NULL or invalid pointer dereference after returning from policy_hash_bysel() if the rebuild is done while any socket policies are installed. Since the rebuild after changing thresholds is scheduled this crash could even occur if the userland sets thresholds seemingly before installing any socket policies. Fixes: 53c2e285 ("xfrm: Do not hash socket policies") Signed-off-by:
Tobias Brunner <tobias@strongswan.org> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> (cherry picked from linux-next commit 6916fb3b) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
- 18 Aug, 2016 23 commits
-
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1614565 Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and queue_io() so that inodes which have only dirty timestamps are properly written on fsync(2) and sync(2). However there are other call sites - most notably going through write_inode_now() - which expect inode to be clean after WB_SYNC_ALL writeback. This is not currently true as we do not clear I_DIRTY_TIME in __writeback_single_inode() even for WB_SYNC_ALL writeback in all the cases. This then resulted in the following oops because bdev_write_inode() did not clean the inode and writeback code later stumbled over a dirty inode with detached wb. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ #349 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-11:0) task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000 RIP: 0010:[<ffffffff818884d2>] [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750 RSP: 0018:ffff88006cdaf7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050 RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286 RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000 R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0 R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40 FS: 0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0 DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948 ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948 ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e Call Trace: [< inline >] inode_to_wb_and_lock_list fs/fs-writeback.c:309 [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554 [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600 [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709 [< inline >] wb_do_writeback fs/fs-writeback.c:1844 [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884 [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094 [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228 [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303 [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392 Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e 00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3 RIP [< inline >] wb_get include/linux/backing-dev-defs.h:212 RIP [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750 fs/fs-writeback.c:281 RSP <ffff88006cdaf7d0> ---[ end trace 986a4d314dcb2694 ]--- Fix the problem by making sure __writeback_single_inode() writes inode only with dirty times in WB_SYNC_ALL mode. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> (cherry picked from commit dc5ff2b1) Signed-off-by:
Christopher Arges <chris.j.arges@canonical.com> Signed-off-by:
-
Tim Gardner authored
BugLink: http://bugs.launchpad.net/bugs/1612725Signed-off-by:
-
Frederic Barrat authored
BugLink: http://bugs.launchpad.net/bugs/1612431 Switch the setting of psl_fir_cntl from debug to production environment recommended value. It mostly affects the PSL behavior when an error is raised in psl_fir1/2. Tested with cxlflash. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> (back ported from linux-next commit c6d2ee09) Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1614560Signed-off-by:
-
Vladimir Davydov authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 615d66c3 upstream. Since commit 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") swap entries do not pin memcg->css.refcnt directly. Instead, they pin memcg->id.ref. So we should adjust the reference counters accordingly when moving swap charges between cgroups. Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.comSigned-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vladimir Davydov authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 1f47b61f upstream. An offline memory cgroup might have anonymous memory or shmem left charged to it and no swap. Since only swap entries pin the id of an offline cgroup, such a cgroup will have no id and so an attempt to swapout its anon/shmem will not store memory cgroup info in the swap cgroup map. As a result, memcg->swap or memcg->memsw will never get uncharged from it and any of its ascendants. Fix this by always charging swapout to the first ancestor cgroup that hasn't released its id yet. [hannes@cmpxchg.org: add comment to mem_cgroup_swapout] [vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()] Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.comSigned-off-by:
-
Johannes Weiner authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 73f576c0 upstream. The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564 ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.orgSigned-off-by:
John Garcia <john.garcia@mesosphere.io> Reviewed-by:
Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 554a5ccc upstream. If we hit this error when mounted with errors=continue or errors=remount-ro: EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to continue. However, ext4_mb_release_context() is the wrong thing to call here since we are still actually using the allocation context. Instead, just error out. We could retry the allocation, but there is a possibility of getting stuck in an infinite loop instead, so this seems safer. [ Fixed up so we don't return EAGAIN to userspace. --tytso ] Fixes: 8556e8f3 ("ext4: Don't allow new groups to be added during block allocation") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit c65d5c6c upstream. If we encounter a filesystem error during orphan cleanup, we should stop. Otherwise, we may end up in an infinite loop where the same inode is processed again and again. EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters Aborting journal on device loop0-8. EXT4-fs (loop0): Remounting filesystem read-only EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed! [...] EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed! [...] See-also: c9eb13a9 ("ext4: fix hang when processing corrupted orphaned inode list") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 5b9554dc upstream. If s_reserved_gdt_blocks is extremely large, it's possible for ext4_init_block_bitmap(), which is called when ext4 sets up an uninitialized block bitmap, to corrupt random kernel memory. Add the same checks which e2fsck has --- it must never be larger than blocksize / sizeof(__u32) --- and then add a backup check in ext4_init_block_bitmap() in case the superblock gets modified after the file system is mounted. Reported-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 6a7fd522 upstream. If ext4_fill_super() fails early, it's possible for ext4_evict_inode() to call ext4_should_journal_data() before superblock options and flags are fully set up. In that case, the iput() on the journal inode can end up causing a BUG(). Work around this problem by reordering the tests so we only call ext4_should_journal_data() after we know it's not the journal inode. Fixes: 2d859db3 ("ext4: fix data corruption in inodes with journalled data") Fixes: 2b405bfa ("ext4: fix data=journal fast mount/umount hang") Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 646caa9c upstream. Commit 06bd3c36 (ext4: fix data exposure after a crash) uncovered a deadlock in ext4_writepages() which was previously much harder to hit. After this commit xfstest generic/130 reproduces the deadlock on small filesystems. The problem happens when ext4_do_update_inode() sets LARGE_FILE feature and marks current inode handle as synchronous. That subsequently results in ext4_journal_stop() called from ext4_writepages() to block waiting for transaction commit while still holding page locks, reference to io_end, and some prepared bio in mpd structure each of which can possibly block transaction commit from completing and thus results in deadlock. Fix the problem by releasing page locks, io_end reference, and submitting prepared bio before calling ext4_journal_stop(). [ Changed to defer the call to ext4_journal_stop() only if the handle is synchronous. --tytso ] Reported-and-tested-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit f70749ca upstream. An extent with lblock = 4294967295 and len = 1 will pass the ext4_valid_extent() test: ext4_lblk_t last = lblock + len - 1; if (len == 0 || lblock > last) return 0; since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end(). We can simplify it by removing the - 1 altogether and changing the test to use lblock + len <= lblock, since now if len = 0, then lblock + 0 == lblock and it fails, and if len > 0 then lblock + len > lblock in order to pass (i.e. it doesn't overflow). Fixes: 5946d089 ("ext4: check for overlapping extents in ext4_valid_extent_entries()") Fixes: 2f974865 ("ext4: check for zero length extent explicitly") Cc: Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Herbert Xu authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 5f070e81 upstream. When there is more data to be processed, the current test in scatterwalk_done may prevent us from calling pagedone even when we should. In particular, if we're on an SG entry spanning multiple pages where the last page is not a full page, we will incorrectly skip calling pagedone on the second last page. This patch fixes this by adding a separate test for whether we've reached the end of a page. Signed-off-by:
-
Herbert Xu authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit b30bdfa8 upstream. As it is if you ask for a sync gcm you may actually end up with an async one because it does not filter out async implementations of ghash. This patch fixes this by adding the necessary filter when looking for ghash. Signed-off-by:
-
Wei Fang authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 47be6184 upstream. We triggered soft-lockup under stress test which open/access/write/close one file concurrently on more than five different CPUs: WARN: soft lockup - CPU#0 stuck for 11s! [who:30631] ... [<ffffffc0003986f8>] dput+0x100/0x298 [<ffffffc00038c2dc>] terminate_walk+0x4c/0x60 [<ffffffc00038f56c>] path_lookupat+0x5cc/0x7a8 [<ffffffc00038f780>] filename_lookup+0x38/0xf0 [<ffffffc000391180>] user_path_at_empty+0x78/0xd0 [<ffffffc0003911f4>] user_path_at+0x1c/0x28 [<ffffffc00037d4fc>] SyS_faccessat+0xb4/0x230 ->d_lock trylock may failed many times because of concurrently operations, and dput() may execute a long time. Fix this by replacing cpu_relax() with cond_resched(). dput() used to be sleepable, so make it sleepable again should be safe. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wei Fang authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 9446385f upstream. FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 69fe05c9 ("fuse: add missing INIT flags") Signed-off-by:
-
Maxim Patlasov authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 9ebce595 upstream. fuse_flush() calls write_inode_now() that triggers writeback, but actual writeback will happen later, on fuse_sync_writes(). If an error happens, fuse_writepage_end() will set error bit in mapping->flags. So, we have to check mapping->flags after fuse_sync_writes(). Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
-
Alexey Kuznetsov authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit ac7f052b upstream. Due to implementation of fuse writeback filemap_write_and_wait_range() does not catch errors. We have to do this directly after fuse_sync_writes() Signed-off-by:
Alexey Kuznetsov <kuznet@virtuozzo.com> Signed-off-by:
-
Fabian Frederick authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 9b24fef9 upstream. Commit 53dad6d3 ("ipc: fix race with LSMs") updated ipc_rcu_putref() to receive rcu freeing function but used generic ipc_rcu_free() instead of msg_rcu_free() which does security cleaning. Running LTP msgsnd06 with kmemleak gives the following: cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88003c0a11f8 (size 8): comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s) hex dump (first 8 bytes): 1b 00 00 00 01 00 00 00 ........ backtrace: kmemleak_alloc+0x23/0x40 kmem_cache_alloc_trace+0xe1/0x180 selinux_msg_queue_alloc_security+0x3f/0xd0 security_msg_queue_alloc+0x2e/0x40 newque+0x4e/0x150 ipcget+0x159/0x1b0 SyS_msgget+0x39/0x40 entry_SYSCALL_64_fastpath+0x13/0x8f Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to only use ipc_rcu_free in case of security allocation failure in newary() Fixes: 53dad6d3 ("ipc: fix race with LSMs") Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.beSigned-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit 77da1605 upstream. I got a KASAN report of use-after-free: ================================================================== BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508 Read of size 8 by task trinity-c1/315 ============================================================================= BUG kmalloc-32 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315 ___slab_alloc+0x4f1/0x520 __slab_alloc.isra.58+0x56/0x80 kmem_cache_alloc_trace+0x260/0x2a0 disk_seqf_start+0x66/0x110 traverse+0x176/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315 __slab_free+0x17a/0x2c0 kfree+0x20a/0x220 disk_seqf_stop+0x42/0x50 traverse+0x3b5/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G B 4.7.0+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480 ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480 ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970 Call Trace: [<ffffffff81d6ce81>] dump_stack+0x65/0x84 [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0 [<ffffffff814704ff>] object_err+0x2f/0x40 [<ffffffff814754d1>] kasan_report_error+0x221/0x520 [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff83888161>] klist_iter_exit+0x61/0x70 [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10 [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50 [<ffffffff8151f812>] seq_read+0x4b2/0x11a0 [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180 [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210 [<ffffffff814b4c45>] do_readv_writev+0x565/0x660 [<ffffffff814b8a17>] vfs_readv+0x67/0xa0 [<ffffffff814b8de6>] do_preadv+0x126/0x170 [<ffffffff814b92ec>] SyS_preadv+0xc/0x10 This problem can occur in the following situation: open() - pread() - .seq_start() - iter = kmalloc() // succeeds - seqf->private = iter - .seq_stop() - kfree(seqf->private) - pread() - .seq_start() - iter = kmalloc() // fails - .seq_stop() - class_dev_iter_exit(seqf->private) // boom! old pointer As the comment in disk_seqf_stop() says, stop is called even if start failed, so we need to reinitialise the private pointer to NULL when seq iteration stops. An alternative would be to set the private pointer to NULL when the kmalloc() in disk_seqf_start() fails. Signed-off-by:
-
David Howells authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit f7d66562 upstream. x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl(). The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
Stephan Mueller <smueller@chronox.de> Tested-by:
David Howells <dhowells@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matt Roper authored
BugLink: http://bugs.launchpad.net/bugs/1614560 commit e2e407dc upstream. Due to our lack of two-step watermark programming, our driver has historically pretended that the cursor plane is always on for the purpose of watermark calculations; this helps avoid serious flickering when the cursor turns off/on (e.g., when the user moves the mouse pointer to a different screen). That workaround was accidentally dropped as we started working toward atomic watermark updates. Since we still aren't quite there yet with two-stage updates, we need to resurrect the workaround and treat the cursor as always active. v2: Tweak cursor width calculations slightly to more closely match the logic we used before the atomic overhaul began. (Ville) Cc: simdev11@outlook.com Cc: manfred.kitzbichler@gmail.com Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: simdev11@outlook.com Reported-by: manfred.kitzbichler@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93892 Fixes: 43d59eda ("drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454479611-6804-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit b2435692) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454958328-30129-1-git-send-email-matthew.d.roper@intel.comTested-by:
Jay <mymailclone@t-online.de> Signed-off-by:
-
