Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463072816-11788-1-git-send-email-kraxel@redhat.com

Smatch warns that the if statement isn't indented.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160512195457.GA19095@mwanda

Add drm_fb_cma_create_with_funcs() for drivers that need to set the
dirty() callback.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-3-git-send-email-noralf@tronnes.org

drm_framebuffer_init() uses const for the drm_framebuffer_funcs
argument so use that on drm_fb_cma_alloc() and
drm_fbdev_cma_create_with_funcs() as well.

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-2-git-send-email-noralf@tronnes.org

It's unused, and really this helper should only look at the state
structure and nothing else. Note that this conflicts with a patch from
Dave that adds refcounting to drm_connectors. It's not yet clear
whether the check Dave adds for connector != NULL is really needed or
the right check.

v2: Fix commmit message (Laurent).

Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-3-git-send-email-daniel.vetter@ffwll.ch

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Fix commit message (Laurent).

v3: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Rebase on top of rockchip changes

v3: Drop unrelated hunk, spotted by Laurent.

v4: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-1-git-send-email-daniel.vetter@ffwll.ch

drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

I kinda hoped that I could still sneak in Noralf's
drm_simple_display_pipe, since there's intereset by others now (for tilcdc
at least). But it wasn't ready by a hair. Oh well.

Otherwise random stuff plus prep patches from Noralf.

* tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic: Add drm_atomic_helper_best_encoder()
  drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs
  drm/fb-cma-helper: Hook up to DocBook and fix some docs
  drm/fb-helper: Remove mention of CONFIG_FB_DEFERRED_IO in docs
  drm/sti: include linux/seq_file.h where needed
  drm/tegra: Use lockless gem BO free callback
  drm/exynos: Use lockless gem BO free callback
  drm: Make drm_encoder_helper_funcs optional

Merge branch 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next

Please pull this mini-series that allows ARC PGU to use
dedicated memory location as framebuffer backing storage.

* 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  ARC: [axs10x] Specify reserved memory for frame buffer
  drm/arcpgu: use dedicated memory area for frame buffer

drm/panel: Changes for v4.7-rc1

This contains support for a bunch of new panels in the simple panel
driver along with some cleanup and support for a new Analogix HDMI to DP
bridge.

* tag 'drm/panel/for-4.7-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for TPK U.S.A. LLC Fusion 7" and 10.1" panels
  drm/bridge: Add Analogix anx78xx support
  devicetree: Add ANX7814 SlimPort transmitter binding
  of: Add vendor prefix for Analogix Semiconductor
  drm/dp: Add define to set 0.5% down-spread in MAX_DOWNSPREAD register
  drm/panel: simple: Add support for Innolux AT070TN92
  drm/panel: simple: Remove useless drm_mode_set_name()
  drm/panel: simple: Set appropriate mode type
  drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS
  drm/panel: simple: Add the 7" DPI panel from Adafruit
  of: Add vendor prefix for On Tat Industrial Company.

Add support for TPK U.S.A. LLC Fusion 7", 10.1" panels to the DRM simple
panel driver.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Although there are other chips from the same family that can reuse this
driver, at the moment we only tested ANX7814 chip.

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices. This driver adds initial support for HDMI
to DP pass-through mode.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
[treding@nvidia.com: coding style, propagate regulator_get() errors]
Signed-off-by: Thierry Reding <treding@nvidia.com>

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Analogix Semiconductor Inc. develops analog and mixed-signal devices for
digital media and communications interconnect applications.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Support of 0.5% down-spread is required for DisplayPort Specification
Version 1.1 Sink.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[treding@nvidia.com: rename to DP_MAX_DOWNSPREAD_0_5]
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add support for the Innolux AT070TN92 panel.
Signed-off-by: Riccardo Bortolato <bortolato@navaltechitalia.it>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm_display_mode_from_videomode() already calls drm_mode_set_name() on
the provided mode.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[treding@nvidia.com: slightly reword commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>

All modes exposed by simple panels should be tagged as driver defined
modes. Moreover, if a panel supports only one mode, this mode is
obviously the preferred one.

Doing this also fix a problem occurring when a 'video=' parameter is
passed on the kernel command line. In some cases the user provided mode
will be preferred over the simple panel ones, which might result in
unpredictable behavior.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[treding@nvidia.com: reshuffle some code for consistency]
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add support for the Olimex LCD-OLinuXino-4.3TS panel to the DRM simple
panel driver.

It is a 480x272 panel connected through a 24-bits RGB interface.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This is a basic TFT panel with a 40-pin FPC connector on it.  The
specification doesn't define timings, but the Adafruit instructions
were setting up 800x480 CVT.

v2: Add .bus_format and vsync/hsync flags.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
[treding@nvidia.com: keep entries properly sorted]
Signed-off-by: Thierry Reding <treding@nvidia.com>

This is the vendor for a 7" DPI panel sold by Adafruit which I'd like
to describe in DT.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

More amdgpu fixes for 4.7.  Highlights:
- enable async pageflips
- UVD fixes for polaris
- lots of GPUVM fixes
- whitespace and code cleanups
- misc bug fixes

* 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux: (32 commits)
  drm/amd/powerplay: rewrite pp_sw_init to make code readable
  drm/amdgpu/dce11: fix audio offset for asics with >7 audio pins
  drm/amdgpu: fix and cleanup user fence handling v2
  drm/amdgpu: move VM fields into job
  drm/amdgpu: move the context from the IBs into the job
  drm/amdgpu: move context switch handling into common code v2
  drm/amdgpu: move preamble IB handling into common code
  drm/amdgpu/gfx7: fix pipeline sync
  amdgpu/uvd: separate context buffer from DPB
  drm/amdgpu: use fence_context to judge ctx switch v2
  drm/amd/amdgpu:  Added more named DRM info messages for debugging
  drm/amd/amdgpu: Add name field to amd_ip_funcs (v2)
  drm/amdgpu: Support DRM_MODE_PAGE_FLIP_ASYNC (v2)
  drm/amdgpu/dce11: don't share PLLs on Polaris
  drm/amdgpu: Drop unused parameter for *get_sleep_divider_id_from_clock
  drm/amdgpu: Simplify calculation in *get_sleep_divider_id_from_clock
  drm/amdgpu: Use max macro in *get_sleep_divider_id_from_clock
  drm/amd/powerplay: Use defined constants for minium engine clock
  drm/amdgpu: add missing licenses on a couple of files
  drm/amdgpu: fetch cu_info once at init
  ...

drm/tegra: Changes for v4.7-rc1

Two small changes, one getting rid of the bogus gamma table size and
another removing Terje from the MAINTAINERS file since he no longer does
any work on host1x or display.

* tag 'drm/tegra/for-4.7-rc1' of git://anongit.freedesktop.org/tegra/linux:
  MAINTAINERS: Remove Terje Bergström as Tegra DRM maintainer
  drm/tegra: Don't set a gamma table size

misc hisilicon cleanups.

* 'drm-hisilicon-next' of github.com:xin3liang/linux:
  drm/hisilicon: Fix DRM_INFO printed issue
  drm/hisilicon: Make kirin_drm_unbind sufficient
  drm/hisilicon: Use drm_connector_register_all

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

 Summary:
   - expose HDMI-PHY clock to other drivers.
     . this patch was included in below patch series but I missed.
             http://www.spinics.net/lists/dri-devel/msg103097.html
   - some fixups about DECON5433 driver
     . this patch corrects vblank handling and fixes up trigger
       configuration.
   - use generic functions - gem_prime_mmap and dma_buf_mmap.
   - use DMA-Mapping API instead of specific one.
   - some code cleanups and fixeups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos/decon5433: fix trigger configuration
  drm/exynos/dsi: use of_graph_get_endpoint_by_regs helper
  drm/exynos/dpi: use of_graph_get_endpoint_by_regs helper
  drm/exynos: Nuke dummy fb->dirty callback
  drm/exynos: use directly DMA mapping APIs on g2d
  drm/exynos/hdmi: Don't print error on deferral due to regulators
  drm/exynos: fix imported dma-buf to be mapped
  drm/exynos: support gem_prime_mmap
  drm/exynos: fimd: harden fimd_calc_clkdiv()
  drm/exynos: fix cancel page flip code
  drm/exynos/decon5433: do not use unnecessary software trigger
  drm/exynos/decon5433: handle vblank in vblank interrupt
  drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clock

Actually, pp_sw_init executes pptable_init and backend_init orderly if
they are initialized successfully. So rewrite it to make code more
readable.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Missing offset in the audio offset array.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We leaked the BO in the error pass, additional to that we only have
one user fence for all IBs in a job.

v2: remove white space changes
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

They are the same for all IBs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We only have one context for all IBs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It was a source of bugs to repeat that in each IP version.

v2: rename parameter
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes the handling which was completely broken when you
ad more than one preamble IB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to wait on the fence as well.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Updated to handle latest UVD ucode.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add (struct drm_connector_helper_funcs *)->best_encoder callback helper
for connectors that support exactly 1 encoder, statically determined at
driver init time.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-6-git-send-email-noralf@tronnes.org

Don't skip drm_bridge_*() calls if encoder->helper_private is NULL.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-5-git-send-email-noralf@tronnes.org

Hook up fb_cma_helper to DocBook. Remove mention of
CONFIG_FB_DEFERRED_IO in the docs, which was forgotten in the latest
version of the deferred_io patch.
Use & when referencing drm_mode_config_funcs in docs.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-3-git-send-email-noralf@tronnes.org

This was forgotten to fixup in the latest version of the deferred_io
patch which made FB_DEFERRED_IO mandatory.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-2-git-send-email-noralf@tronnes.org

Use of the ctx pointer is not safe, because they are likely already
be assigned to another ctx when doing comparing.

v2: recreate from scratch, avoid all unnecessary changes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>