- 02 Aug, 2018 1 commit
-
-
Johannes Thumshirn authored
KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a LOGO and have FIP debugging enabled. This is because we're first freeing the skb and then printing the frame's DID. But the DID is a member of the FC frame header which in turn is the skb's payload. Exchange the debug print and kfree_skb() calls so we're not touching the freed data. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 31 Jul, 2018 2 commits
-
-
Bart Van Assche authored
Tell snprintf() to store at most 255 characters in the output buffer instead of 256. This patch avoids that smatch reports the following warning: drivers/scsi/qedi/qedi_main.c:891: qedi_get_boot_tgt_info() error: snprintf() is printing too much 256 vs 255 Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: <QLogic-Storage-Upstream@cavium.com> Cc: <stable@vger.kernel.org> Acked-by:
Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by:
-
Quinn Tran authored
In the case of IOCB QFull, Initiator code can leave behind a stale pointer to an SRB structure on the outstanding command array. Fixes: 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") Cc: stable@vger.kernel.org #v4.16+ Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
- 20 Jul, 2018 5 commits
-
-
Anil Gurumurthy authored
Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: <stable@vger.kernel.org> Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
-
Quinn Tran authored
During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Quinn Tran authored
Use chip shutdown at the start of unload to stop all DMA + traffic and bring down the laser. This prevents any link activities from triggering the driver to be re-engaged. Fixes: 4b60c827 ("scsi: qla2xxx: Add fw_started flags to qpair") Cc: <stable@vger.kernel.org> #4.16 Signed-off-by:
-
Quinn Tran authored
Add wait for session deletion to finish before freeing an NPIV scsi host. Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Quinn Tran authored
In case of IOCB Queue full or system where memory is low and driver receives large number of RSCN storm, the stale sp pointer can stay on gpnid_list resulting in page_fault. This patch fixes this issue by initializing the sp->elem list head and removing sp->elem before memory is freed. Following stack trace is seen 9 [ffff987b37d1bc60] page_fault at ffffffffad516768 [exception RIP: qla24xx_async_gpnid+496] 10 [ffff987b37d1bd10] qla24xx_async_gpnid at ffffffffc039866d [qla2xxx] 11 [ffff987b37d1bd80] qla2x00_do_work at ffffffffc036169c [qla2xxx] 12 [ffff987b37d1be38] qla2x00_do_dpc_all_vps at ffffffffc03adfed [qla2xxx] 13 [ffff987b37d1be78] qla2x00_do_dpc at ffffffffc036458a [qla2xxx] 14 [ffff987b37d1bec8] kthread at ffffffffacebae31 Fixes: 2d73ac61 ("scsi: qla2xxx: Serialize GPNID for multiple RSCN") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by:
-
- 13 Jul, 2018 4 commits
-
-
Tony Battersby authored
The calling convention of blk_get_request() has changed in lk 4.18; update the comment in sg.c to match. Fixes: ff005a06 ("block: sanitize blk_get_request calling conventions") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Tony Battersby authored
Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acb ("sg: O_EXCL and other lock handling") Cc: <stable@vger.kernel.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Varun Prakash authored
In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the opcode, it is possible that task->hdr is NULL. There are two cases based on opcode argument: 1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called after iscsi_check_tmf_restrictions() iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu(). Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL pointer dereference. 2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or invalid. This patch fixes this issue by removing task->hdr->opcode from the printk statement. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Varun Prakash authored
- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating max_iso_npdu to get max TCP payload in multiple of mss. - call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set csk->submode, it is used in calculating number of iso pdus. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
- 11 Jul, 2018 8 commits
-
-
Cédric Le Goater authored
commit cd43c221 ("scsi: cxlflash: Isolate external module dependencies") introduced the use of ifdefs to avoid compilation errors when one of the possible backend driver, CXL or OCXL, is not compiled. Unfortunately, the wrong defines are used and the backend ops are never assigned, leading to a kernel crash in any case when the cxlflash module is loaded. Signed-off-by:
Cédric Le Goater <clg@kaod.org> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Manish Rangankar authored
In case of iSCSI offload BFS environment, MFW requires to mark virtual link based upon qedi load status. Signed-off-by:
Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
Need to notify firmware when driver is loaded and unloaded. Signed-off-by:
Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Don Brace authored
The original complaint was the lsscsi -t showed the same SAS address of the two enclosures (SEP devices). In fact the SAS address was being set to the Enclosure Logical Identifier (ELI). Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Damien Le Moal authored
Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@kernel.org Reviewed-by:
-
Chuck Anderson authored
Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036bb ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by:Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
This patch fixes crash for FCoE adapter. Once driver initialization is complete, firmware will start posting Asynchronous Event, However driver has not yet allocated workqueue to process and queue up work. This delay of allocating workqueue results into NULL pointer access. The following stack trace is seen: [ 24.577259] BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 [ 24.623133] PGD 0 P4D 0 [ 24.636760] Oops: 0000 [#1] SMP NOPTI [ 24.656942] Modules linked in: i2c_algo_bit drm_kms_helper sr_mod(+) syscopyarea sysfillrect sysimgblt cdrom fb_sys_fops ata_generic ttm pata_acpi sd_mod ahci pata_atiixp sfc(+) qla2xxx(+) libahci drm qla4xxx(+) nvme_fc hpsa mdio libiscsi qlcnic(+) nvme_fabrics scsi_transport_sas serio_raw mtd crc32c_intel libata nvme_core i2c_core scsi_transport_iscsi tg3 scsi_transport_fc bnx2 iscsi_boot_sysfs dm_multipath dm_mirror dm_region_hash dm_log dm_mod [ 24.887449] CPU: 0 PID: 177 Comm: kworker/0:3 Not tainted 4.17.0-rc6 #1 [ 24.925119] Hardware name: HP ProLiant DL385 G7, BIOS A18 08/15/2012 [ 24.962106] Workqueue: events work_for_cpu_fn [ 24.987098] RIP: 0010:__queue_work+0x1f/0x3a0 [ 25.011672] RSP: 0018:ffff992642ceba10 EFLAGS: 00010082 [ 25.042116] RAX: 0000000000000082 RBX: 0000000000000082 RCX: 0000000000000000 [ 25.083293] RDX: ffff8cf9abc6d7d0 RSI: 0000000000000000 RDI: 0000000000002000 [ 25.123094] RBP: 0000000000000000 R08: 0000000000025a40 R09: ffff8cf9aade2880 [ 25.164087] R10: 0000000000000000 R11: ffff992642ceb6f0 R12: ffff8cf9abc6d7d0 [ 25.202280] R13: 0000000000002000 R14: ffff8cf9abc6d7b8 R15: 0000000000002000 [ 25.242050] FS: 0000000000000000(0000) f9b5c00000(0000) knlGS:0000000000000000 [ 25.977565] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.010457] CR2: 0000000000000102 CR3: 000000030760a000 CR4: 00000000000406f0 [ 26.051048] Call Trace: [ 26.063572] ? __switch_to_asm+0x34/0x70 [ 26.086079] queue_work_on+0x24/0x40 [ 26.107090] qla2x00_post_work+0x81/0xb0 [qla2xxx] [ 26.133356] qla2x00_async_event+0x1ad/0x1a20 [qla2xxx] [ 26.164075] ? lock_timer_base+0x67/0x80 [ 26.186420] ? try_to_del_timer_sync+0x4d/0x80 [ 26.212284] ? del_timer_sync+0x35/0x40 [ 26.234080] ? schedule_timeout+0x165/0x2f0 [ 26.259575] qla82xx_poll+0x13e/0x180 [qla2xxx] [ 26.285740] qla2x00_mailbox_command+0x74b/0xf50 [qla2xxx] [ 26.319040] qla82xx_set_driver_version+0x13b/0x1c0 [qla2xxx] [ 26.352108] ? qla2x00_init_rings+0x206/0x3f0 [qla2xxx] [ 26.381733] qla2x00_initialize_adapter+0x35c/0x7f0 [qla2xxx] [ 26.413240] qla2x00_probe_one+0x1479/0x2390 [qla2xxx] [ 26.442055] local_pci_probe+0x3f/0xa0 [ 26.463108] work_for_cpu_fn+0x10/0x20 [ 26.483295] process_one_work+0x152/0x350 [ 26.505730] worker_thread+0x1cf/0x3e0 [ 26.527090] kthread+0xf5/0x130 [ 26.545085] ? max_active_store+0x80/0x80 [ 26.568085] ? kthread_bind+0x10/0x10 [ 26.589533] ret_from_fork+0x22/0x40 [ 26.610192] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 89 ff 41 56 41 55 41 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 83 ec 0 86 02 01 00 00 01 0f 85 80 02 00 00 49 c7 c6 c0 ec 01 00 41 [ 27.308540] RIP: __queue_work+0x1f/0x3a0 RSP: ffff992642ceba10 [ 27.341591] CR2: 0000000000000102 [ 27.360208] ---[ end trace 01b7b7ae2c005cf3 ]--- Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 9b3e0f4d ("scsi: qla2xxx: Move work element processing out of DPC thread" Reported-by:
Li Wang <liwang@redhat.com> Tested-by:
-
Quinn Tran authored
GPNFT command allocates 2 buffer for switch query. On completion, the same buffers were freed using different size, instead of using original size at the time of allocation. This patch saves the size of the request and response buffers and uses that to free them. Following stack trace can be seen when using debug kernel dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_fmt+0x5f/0x80 check_unmap+0xfb/0xa20 debug_dma_free_coherent+0x110/0x160 qla24xx_sp_unmap+0x131/0x1e0 [qla2xxx] qla24xx_async_gnnft_done+0xb6/0x550 [qla2xxx] qla2x00_do_work+0x1ec/0x9f0 [qla2xxx] Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 33b28357 ("scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan") Reported-by:
Himanshu Madhani <hmadhani@redhat.com> Signed-off-by:
-
- 26 Jun, 2018 2 commits
-
-
Jann Horn authored
As Al Viro noted in commit 128394ef ("sg_write()/bsg_write() is not fit to be called under KERNEL_DS"), sg improperly accesses userspace memory outside the provided buffer, permitting kernel memory corruption via splice(). But it doesn't just do it on ->write(), also on ->read(). As a band-aid, make sure that the ->read() and ->write() handlers can not be called in weird contexts (kernel context or credentials different from file opener), like for ib_safe_file_access(). If someone needs to use these interfaces from different security contexts, a new interface should be written that goes through the ->ioctl() handler. I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access() because I couldn't find a good common header - please tell me if you know a better way. [mkp: s/_safe_/_check_/] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
-
Raghava Aditya Renukunta authored
The driver fails to set the correct queue depth for native devices, due to failing to set the device type prior to calling aac_set_safw_target_qd(). This results in slave configure setting the queue depth to 1. This causes around 30% performance degradation. Fixed by setting the dev type before trying to set queue depth. Reported-by:
Steve Best <sbest@redhat.com> Fixes: 0bcb45fb ("scsi: aacraid: Add helper function to set queue depth") cc: stable@vger.kernel.org Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
David Carroll <David.Carroll@microsemi.com> Reviewed-by:
-
- 20 Jun, 2018 1 commit
-
-
David Disseldorp authored
SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not altered based on the allocation length, so always calculate and pack the full key list length even if the list itself is truncated. According to Maged: Yes it fixes the "Storage Spaces Persistent Reservation" test in the Windows 2016 Server Failover Cluster validation suites when having many connections that result in more than 8 registrations. I tested your patch on 4.17 with iblock. This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test. Cc: stable@vger.kernel.org Signed-off-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Maged Mokhtar <mmokhtar@petasan.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 19 Jun, 2018 4 commits
-
-
Luis Henriques authored
Since commit 80c49563 ("scsi: scsi_debug: implement IMMED bit") there are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory leak in schedule_resp(), which can be invoked while unloading the scsi_debug module: free_all_queued() had already freed all sd_dp and schedule_resp will alloc a new one, which will never get freed. Here's the kmemleak report while running xfstests generic/350: unreferenced object 0xffff88007d752b00 (size 128): comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s) hex dump (first 32 bytes): 00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............ 00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_... backtrace: [<000000002abd83d0>] 0xffffffffa000705e [<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0 [<000000000c119a00>] scsi_request_fn+0x251/0x550 [<000000009de0c736>] __blk_run_queue+0x3f/0x60 [<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0 [<00000000d17ec79f>] blk_execute_rq+0x3a/0x50 [<00000000a7654b6e>] scsi_execute+0x113/0x250 [<00000000fd78f7cd>] sd_sync_cache+0x95/0x160 [<0000000024dacb14>] sd_shutdown+0x9b/0xd0 [<00000000e9101710>] sd_remove+0x5f/0xb0 [<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0 [<00000000e8ad57b6>] bus_remove_device+0xe9/0x160 [<00000000713a7b8a>] device_del+0x120/0x320 [<00000000e5db670c>] __scsi_remove_device+0x115/0x150 [<00000000eccbef30>] scsi_forget_host+0x20/0x60 [<00000000cd5a0738>] scsi_remove_host+0x6d/0x120 Cc: stable@vger.kernel.org # v4.17+ Signed-off-by:
Luis Henriques <lhenriques@suse.com> Acked-by:
-
Mikhail Malygin authored
The patch reverts changes done in qlt_schedule_sess_for_deletion() to avoid spinlock recursion sess->vha->work_lock should be used instead of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or qlt_handle_login() [mkp: roll in build warning reported by sfr] Fixes: 1c6cacf4 ("scsi: qla2xxx: Fixup locking for session deletion") Cc: <stable@vger.kernel.org> #v4.17 Signed-off-by:
Mikhail Malygin <m.malygin@yadro.com> Reported-by:
-
Arnd Bergmann authored
Driver does both wmb() and writel(). The latter already has a barrier on some architectures like arm64. This ends up with CPU observing two barriers back to back before executing the register write. Drivers should generally assume that the barrier implied by writel() is sufficient for ordering DMA. Remove the extraneous wmb() before it. [mkp: Squashed Arnd's and Sinan's patches] Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Sinan Kaya <okaya@codeaurora.org> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
bstroesser@ts.fujitsu.com authored
Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
- 16 Jun, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period -
git://linuxtv.org/mchehab/experimentalLinus Torvalds authored
Pull documentation fixes from Mauro Carvalho Chehab: "This solves a series of broken links for files under Documentation, and improves a script meant to detect such broken links (see scripts/documentation-file-ref-check). The changes on this series are: - can.rst: fix a footnote reference; - crypto_engine.rst: Fix two parsing warnings; - Fix a lot of broken references to Documentation/*; - improve the scripts/documentation-file-ref-check script, in order to help detecting/fixing broken references, preventing false-positives. After this patch series, only 33 broken references to doc files are detected by scripts/documentation-file-ref-check" * tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits) fix a series of Documentation/ broken file name references Documentation: rstFlatTable.py: fix a broken reference ABI: sysfs-devices-system-cpu: remove a broken reference devicetree: fix a series of wrong file references devicetree: fix name of pinctrl-bindings.txt devicetree: fix some bindings file names MAINTAINERS: fix location of DT npcm files MAINTAINERS: fix location of some display DT bindings kernel-parameters.txt: fix pointers to sound parameters bindings: nvmem/zii: Fix location of nvmem.txt docs: Fix more broken references scripts/documentation-file-ref-check: check tools/*/Documentation scripts/documentation-file-ref-check: get rid of false-positives scripts/documentation-file-ref-check: hint: dash or underline scripts/documentation-file-ref-check: add a fix logic for DT scripts/documentation-file-ref-check: accept more wildcards at filenames scripts/documentation-file-ref-check: fix help message media: max2175: fix location of driver's companion documentation media: v4l: fix broken video4linux docs locations media: dvb: point to the location of the old README.dvb-usb file ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify updates from Jan Kara: "fsnotify cleanups unifying handling of different watch types. This is the shortened fsnotify series from Amir with the last five patches pulled out. Amir has modified those patches to not change struct inode but obviously it's too late for those to go into this merge window" * tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: add fsnotify_add_inode_mark() wrappers fanotify: generalize fanotify_should_send_event() fsnotify: generalize send_to_group() fsnotify: generalize iteration of marks by object type fsnotify: introduce marks iteration helpers fsnotify: remove redundant arguments to handle_event() fsnotify: use type id to identify connector object type
-
git://github.com/bzolnier/linuxLinus Torvalds authored
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, few small fixes, some cleanups and dead drivers removal: - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen) - add missing module license tags to omap/omapfb driver (Arnd Bergmann) - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd Bergmann) - convert savagefb, aty128fb & radeonfb drivers to use msleep & co. (Jia-Ju Bai) - allow COMPILE_TEST build for viafb driver (media part was reviewed by media subsystem Maintainer) - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm drivers (drm parts were acked by shmob-drm driver Maintainer) - remove unused auo_k190xfb drivers - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy Shevchenko, Colin Ian King)" * tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits) fb_omap2: add gpiolib dependency video/omap: add module license tags MAINTAINERS: make omapfb orphan video: fbdev: pxafb: match_string() conversion fixup video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling" video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer" video: fbdev: pxafb: Convert to use match_string() helper video: fbdev: via: allow COMPILE_TEST build video: fbdev: remove unused sh_mobile_meram driver drm: shmobile: remove unused MERAM support video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support video: fbdev: remove unused auo_k190xfb drivers video: omap: Improve a size determination in omapfb_do_probe() video: sm501fb: Improve a size determination in sm501fb_probe() video: fbdev-MMP: Improve a size determination in path_init() video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe() video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe() video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull compat updates from Al Viro: "Some biarch patches - getting rid of assorted (mis)uses of compat_alloc_user_space(). Not much in that area this cycle..." * 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: simplify compat ioctl handling signalfd: lift sigmask copyin and size checks to callers of do_signalfd4() vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull aio fixes from Al Viro: "Assorted AIO followups and fixes" * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: eventpoll: switch to ->poll_mask aio: only return events requested in poll_mask() for IOCB_CMD_POLL eventfd: only return events requested in poll_mask() aio: mark __aio_sigset::sigmask const
-
- 15 Jun, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull module updates from Jessica Yu: "Minor code cleanup and also allow sig_enforce param to be shown in sysfs with CONFIG_MODULE_SIG_FORCE" * tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Allow to always show the status of modsign module: Do not access sig_enforce directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull uml updates from Richard Weinberger: "Minor updates for UML: - fixes for our new vector network driver by Anton - initcall cleanup by Alexander - We have a new mailinglist, sourceforge.net sucks" * 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix raw interface options um: Fix initialization of vector queues um: remove uml initcalls um: Update mailing list address
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some small RISC-V updates I'd like to target for 4.18. They are all fairly small this time. Here's a short summary, there's more info in the commits/merges: - a fix to __clear_user to respect the passed arguments. - enough support for the perf subsystem to work with RISC-V's ISA defined performance counters. - support for sparse and cleanups suggested by it. - support for R_RISCV_32 (a relocation, not the 32-bit ISA). - some MAINTAINERS cleanups. - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's always present. I've given these a simple build+boot test" * tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig RISC-V: Handle R_RISCV_32 in modules riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set riscv: add riscv-specific predefines to CHECKFLAGS riscv: split the declaration of __copy_user riscv: no __user for probe_kernel_address() riscv: use NULL instead of a plain 0 perf: riscv: Add Document for Future Porting Guide perf: riscv: preliminary RISC-V support MAINTAINERS: Update Albert's email, he's back at Berkeley MAINTAINERS: Add myself as a maintainer for SiFive's drivers riscv: Fix the bug in memory access fixup code
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm updates from Paolo Bonzini: "Mostly the PPC part of the release, but also switching to Arnd's fix for the hyperv config issue and a typo fix. Main PPC changes: - reimplement the MMIO instruction emulation - transactional memory support for PR KVM - improve radix page table handling" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits) KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV KVM: x86: fix typo at kvm_arch_hardware_setup comment KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts KVM: PPC: Book3S PR: Handle additional interrupt types KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state KVM: PPC: Book3S PR: Add emulation for trechkpt. KVM: PPC: Book3S PR: Add emulation for treclaim. KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs KVM: PPC: Book3S PR: Always fail transactions in guest privileged state ...
-
