- 28 Feb, 2023 22 commits
-
-
Felix Kuehling authored
Use proper amdgpu_gem_prime_import function to handle all kinds of imports. Remember the dmabuf reference to enable proper multi-GPU attachment to multiple VMs without erroneously re-exporting the underlying BO multiple times. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Mustapha Ghaddar authored
[WHY & HOW] Update the declaration to give a better idea of what the function does. Reviewed-by:
Mustapha Ghaddar <mghaddar@amd.com> Tested-by:
-
Aric Cyr authored
This reverts commit 6cfb6df2. [Why & How] Original change causes black screen. Revert until fix is available. Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Alvin Lee authored
[Why & How] - If for any reason PMFW fails to set the expected (or valid) DISPCLK WDIVIDER, then DAL will program DENTIST DISPCLK WDIVIDER to correct for this issue Reviewed-by:
Samson Tam <Samson.Tam@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Sung Joon Kim authored
[why] More branch devices are able to support Freesync over PCon so include them in the list of supporting devices. [how] Add more compatible PCon devices in the whitelist for Freesync over Pcon. Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
Sung Joon Kim <sungjoon.kim@amd.com> Tested-by:
-
Yihan Zhu authored
[WHY] DP 420 formats do not light up because the pixel processing mode of the DP_FORMAT is misprogrammed [HOW] Added appropriate programming for DP pixel format Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Yihan Zhu <yihan.zhu@amd.com> Tested-by:
-
Ayush Gupta authored
[Why] System restart observed while changing the display resolution to 8k with extended mode. Sytem restart was caused by a page fault. [How] When the driver populates subvp info it did it for both the pipes using vblank which caused an outof bounds array access causing the page fault. added checks to allow the top pipe only to fix this issue. Co-authored-by:
Ayush Gupta <ayush.gupta@amd.com> Reviewed-by:
-
Hersen Wu authored
[why] during boot up or resume from s3, hw default value of domain_power_forceon is 1. when program domain_power_gate to 1 to power down hw block, hw will not change to power off due to domain_power_forceon = 1. [how] enable_power_gating_plane(true) should be executed to set domain_power_forceon to 0 before dsc_pg_control. dsc_pg_control is already called by dcn3x_init_hw--> init_pipes--> dsc_pg_control. no need be programmed with dcn3x_init_hw one more time. to trigger dchub, dsc block power state change, need program dc_ip_request_cntl to notify hw block. Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
Hersen Wu <hersenxs.wu@amd.com> Tested-by:
-
Mustapha Ghaddar authored
[WHY & HOW] After we allocate BW at plug, we will de-alloc and allocate only what stream needs at stream_enable() [HOW] Introduce bw allocation check at link_enable() for DPIA links Reviewed-by:
-
Aric Cyr authored
This reverts commit 4f1b5e73. [Why & How] Original change causes a regression. Revert until fix is available. Reviewed-by:
-
Jasdeep Dhillon authored
[WHY] Adding 1920x1080 as fail safe mode for Video Format Fall Back Policy. Reviewed-by:
Jerry Zuo <Jerry.Zuo@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Tested-by:
-
Aric Cyr authored
[WHY] udelay should not be used for long waits since it keeps CPU active, wasting power. [HOW] Use fsleep where acceptable to allow CPU cores to be parked by the scheduler. Reviewed-by:
-
Alex Hung authored
[WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly. Reviewed-by:
Alex Hung <alex.hung@amd.com> Tested-by:
-
Ryan Lin authored
[Why] Needs to set the default value of the LTTPR timeout after resume. [How] Set the default (3.2ms) timeout at resuming if the sink supports LTTPR Reviewed-by:
Ryan Lin <tsung-hua.lin@amd.com> Tested-by:
-
Horatio Zhang authored
The call trace occurs when the amdgpu is removed after the mode1 reset. During mode1 reset, from suspend to resume, there is no need to reinitialize the ta firmware buffer which caused the bo pin_count increase redundantly. [ 489.885525] Call Trace: [ 489.885525] <TASK> [ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm] [ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu] [ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu] [ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu] [ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu] [ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 489.886132] ? __pm_runtime_resume+0x60/0x90 [ 489.886134] pci_device_remove+0x3e/0xb0 [ 489.886135] __device_release_driver+0x1ab/0x2a0 [ 489.886137] driver_detach+0xf3/0x140 [ 489.886138] bus_remove_driver+0x6c/0xf0 [ 489.886140] driver_unregister+0x31/0x60 [ 489.886141] pci_unregister_driver+0x40/0x90 [ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu] Signed-off-by:
Horatio Zhang <Hongkun.Zhang@amd.com> Signed-off-by:
longlyao <Longlong.Yao@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Tom Rix authored
building with gcc and W=1 reports drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable ‘ring’ set but not used [-Werror=unused-but-set-variable] 81 | struct amdgpu_ring *ring; | ^~~~ ring is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
tiancyin authored
[Why] Variable adev->crtc_irq.num_types was initialized as the value of adev->mode_info.num_crtc at early_init stage, later at hw_init stage, the num_crtc changed due to the display pipe harvest on some SKUs, but the num_types was not updated accordingly, that cause below error in gpu recover. *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3 [How] Defer the initialization of num_types to eliminate the error logs. Signed-off-by:
tiancyin <tianci.yin@amd.com> Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Mario Limonciello authored
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1 where some NBIO registers aren't properly setup. Ensure that they're set during initialization. Tested-by:
Richard Gong <richard.gong@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
-
Harry Wentland authored
Format the input and output CSC matrix so they look like 3x4 matrixes. This will make parsing them much easier and allows us to quickly spot potential mistakes. Signed-off-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Harry Wentland authored
This will let us pass the kms_hdr.bpc_switch IGT test. The reason the bpc restriction was required is historical. At one point in time we were not falling back to a lower bpc when we didn't have enough bandwidth for the maximum bpc reported by a display. This meant that we couldn't enable some high refresh modes unless we limitted the bpc. Starting with this patch the issue is fixed: commit cbd14ae7 ("drm/amd/display: Fix incorrectly pruned modes with deep color") This patch implemented a fallback mechanism if mode validation failed at the max bpc. This means users now automatically get all modes that can be supported by at least 6 bpc. The driver will enable the mode with the highest possible bpc that is supported by the display. v2: - explain why this is no longer needed (Michel) - refer to commit that fixed bpc fallback (Michel) Signed-off-by:
Joshua Ashton <joshua@froggi.es> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Candice Li authored
Fixes following warnings: warning: no previous prototype for 'umc_v8_10_convert_error_address' warning: variable 'channel_index' set but not used Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
- 23 Feb, 2023 18 commits
-
-
Kun Liu authored
implement apu_thermal_cap r/w callback for vangogh Signed-off-by:
Kun Liu <Kun.Liu2@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Kun Liu authored
added a sysfs interface for thermal throttling, then userspace can get/update thermal limit Signed-off-by:
-
Arthur Grillo authored
Remove a couple of local variables that are only set but never used, also remove an static utility function that is never used in consequence of the variable removal. This decrease the number of -Wunused-but-set-variable warnings. Acked-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
-
Arthur Grillo authored
Remove local variables that were just set but were never used. This decrease the number of -Wunused-but-set-variable warnings. Acked-by:
-
Mark Hawrylak authored
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on driver load. This patch treats iMac11,2 the same as iMac10,1, so the eDP panel stays active. Additional steps: Kernel boot parameter radeon.nomodeset=0 required to keep the eDP panel active. This patch is an extension of commit 564d8a2c ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)") Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/Signed-off-by:
Mark Hawrylak <mark.hawrylak@gmail.com> Signed-off-by:
-
Thomas Weißschuh authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Thomas Weißschuh authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Reviewed-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:1199: warning: expecting prototype for dc_link_detect_connection_type(). Prototype was for link_detect_connection_type() instead. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4103Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Hans de Goede authored
The parent for the backlight device should be the drm-connector object, not the PCI device. Userspace relies on this to be able to detect which backlight class device to use on hybrid gfx devices where there may be multiple native (raw) backlight devices registered. Specifically gnome-settings-daemon expects the parent device to have an "enabled" sysfs attribute (as drm_connector devices do) and tests that this returns "enabled" when read. This aligns the parent of the backlight device with i915, nouveau, radeon. Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already uses the drm_connector as parent, only amdgpu_dm.c used the PCI device as parent before this change. Note this is marked as a RFC because I don't have hw to test, so this has only been compile tested! If someone can test this on actual hw which hits the changed code path that would be great. Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Guchun Chen authored
SMU IF version mismatch as a warning message exists widely after asic production, however, due to this log level setting, such mismatch warning will be caught by automation test like IGT and reported as a fake error after checking. As such mismatch does not break anything, to reduce confusion, downgrade it from dev_warn to dev_info. Signed-off-by:
-
Candice Li authored
Support ecc info query for umc v8_10. v2: Simplied by convert_error_address. v3: Remove unused variable and invalid checking. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by:
-
Candice Li authored
Add convert_error_address for umc v8_10. Signed-off-by:
-
Tao Zhou authored
bad_page_threshold controls page retirement behavior and it should be also checked. v2: simplify the condition of bad page handling path. Signed-off-by:
-
Tao Zhou authored
Ignore ras umc bad page threshold by default, GPU initialization won't be stopped in this mode. v2: refine the description of bad_page_threshold. Signed-off-by:
-
Tao Zhou authored
If a UMC bad page is reserved but not freed by an application, the application may trigger uncorrectable error repeatly by accessing the page. v2: add specific function to do the check. v3: remove duplicate pages, calculate new added bad page number. v4: reuse save_bad_pages to calculate new added bad page number. Signed-off-by:
-
Tao Zhou authored
It records how many bad pages are retired in one uncorrectable error. Signed-off-by:
-
Evan Quan authored
It is assumed the pptable used before runpm is same as the one used afterwards. Thus, we can reuse the stored copy and do not need to resetup the pptable again. Signed-off-by:
Feifei Xu <feifei.xu@amd.com> Signed-off-by:
-
Evan Quan authored
The check for baco support relies on the correct baco state. Signed-off-by:
-
