- 14 Mar, 2019 40 commits
-
-
Thomas Hellstrom authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 4cbfa1e6 upstream. Previously we set only the dma mask and not the coherent mask. Fix that. Also, for clarity, make sure both are initially set to 64 bits. Cc: <stable@vger.kernel.org> Fixes: 0d00c488: ("drm/vmwgfx: Fix the driver for large dma addresses") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Tina Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit a2fcd5c8 upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> [danvet: Add additional explanations + cc: stable.] Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.comSigned-off-by:
-
Felix Fietkau authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 9d0f50b8 upstream. Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management frames need to be software encrypted. Since normal data packets are still encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb, which don't have the necessary tailroom for software encryption. Change the code to add tailroom for encrypted management packets, even if crypto_tx_tailroom_needed_cnt is 0. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit db409092 upstream. Booting 4.20 on a TheCUS N2100 results in a kernel oops while probing PCI, due to n2100_pci_map_irq() having been discarded during boot. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: stable@vger.kernel.org # 2.6.18+ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 67fc5dc8 upstream. When generating vdso-o32.lds & vdso-n32.lds for use with programs running as compat ABIs under 64b kernels, we previously haven't included the compiler flags that are supposedly common to all ABIs - ie. those in the ccflags-vdso variable. This is problematic in cases where we need to provide the -m%-float flag in order to ensure that we don't attempt to use a floating point ABI that's incompatible with the target CPU & ABI. For example a toolchain using current gcc trunk configured --with-fp-32=xx fails to build a 64r6el_defconfig kernel with the following error: cc1: error: '-march=mips1' requires '-mfp32' make[2]: *** [arch/mips/vdso/Makefile:135: arch/mips/vdso/vdso-o32.lds] Error 1 Include $(ccflags-vdso) for the compat VDSO .lds builds, just as it is included for the native VDSO .lds & when compiling objects for the compat VDSOs. This ensures we consistently provide the -msoft-float flag amongst others, avoiding the problem by ensuring we're agnostic to the toolchain defaults. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Cc: linux-mips@vger.kernel.org Cc: Kevin Hilman <khilman@baylibre.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Maciej W . Rozycki <macro@linux-mips.org> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Aaro Koskinen authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit dcf300a6 upstream. Don't set octeon_dma_bar_type if PCI is disabled. This avoids creation of the MSI irqchip later on, and saves a bit of memory. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Vladimir Kondratiev authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 05dc6001 upstream. Accordingly to the documentation ---cut--- The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE fields can be cleared by either a reset or by writing the current value of GCR_ERROR_CAUSE.ERR_TYPE to the GCR_ERROR_CAUSE.ERR_TYPE register. ---cut--- Do exactly this. Original value of cm_error may be safely written back; it clears error cause and keeps other bits untouched. Fixes: 3885c2b4 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by:
Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit d88c93f0 upstream. debugfs_rename() needs to check that the dentries passed into it really are valid, as sometimes they are not (i.e. if the return value of another debugfs call is passed into this one.) So fix this up by properly checking if the two parent directories are errors (they are allowed to be NULL), and if the dentry to rename is not NULL or an error. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit f8a70d8b upstream. The > comparison should be >= to prevent reading beyond the end of the func->template[] array. (The func->template array is allocated in vexpress_syscfg_regmap_init() and it has func->num_templates elements.) Fixes: 974cc7b9 ("mfd: vexpress: Define the device as MFD cells") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 7146db33 upstream. Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd ("Prioritize synchronous signals over 'normal' signals") Tested-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 35634ffa upstream. Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by:
-
Martin Kepplinger authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit d5d27fd9 upstream. Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft reset may cause bus master lock up") for MX28 too. It has the same problem. Observed problem: once per 100,000+ MX28 reboots NAND read failed on DMA timeout errors: [ 1.770823] UBI: attaching mtd3 to ubi0 [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 [ 4.156033] gpmi_nand: Error in ECC-based read: -110 [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 bytes from PEB 0:0, read only 0 bytes, retry [ 4.171283] step 1 error [ 4.173846] gpmi_nand: Chip: 0, Error -1 Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. I have a quote from NXP regarding this problem, from July 18th 2016: "As the i.MX23 and i.MX28 are of the same generation, they share many characteristics. Unfortunately, also the erratas may be shared. In case of the documented erratas and the workarounds, you can also apply the workaround solution of one device on the other one. This have been reported, but I’m afraid that there are not an estimated date for updating the Errata documents. Please accept our apologies for any inconveniences this may cause." Fixes: 6f2a6a52 ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems") Cc: stable@vger.kernel.org Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Han Xu <han.xu@nxp.com> Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 489338a7 upstream. Notice that the use of the bitwise OR operator '|' always leads to true in this particular case, which seems a bit suspicious due to the context in which this expression is being used. Fix this by using bitwise AND operator '&' instead. This bug was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Fixes: 6a6cd11d ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190122233439.GA5868@embeddedorSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Mark Rutland authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 9dff0aa9 upstream. The perf tool uses /proc/sys/kernel/perf_event_mlock_kb to determine how large its ringbuffer mmap should be. This can be configured to arbitrary values, which can be larger than the maximum possible allocation from kmalloc. When this is configured to a suitably large value (e.g. thanks to the perf fuzzer), attempting to use perf record triggers a WARN_ON_ONCE() in __alloc_pages_nodemask(): WARNING: CPU: 2 PID: 5666 at mm/page_alloc.c:4511 __alloc_pages_nodemask+0x3f8/0xbc8 Let's avoid this by checking that the requested allocation is possible before calling kzalloc. Reported-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tony Luck authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit d28af26f upstream. Internal injection testing crashed with a console log that said: mce: [Hardware Error]: CPU 7: Machine Check Exception: f Bank 0: bd80000000100134 This caused a lot of head scratching because the MCACOD (bits 15:0) of that status is a signature from an L1 data cache error. But Linux says that it found it in "Bank 0", which on this model CPU only reports L1 instruction cache errors. The answer was that Linux doesn't initialize "m->bank" in the case that it finds a fatal error in the mce_no_way_out() pre-scan of banks. If this was a local machine check, then this partially initialized struct mce is being passed to mce_panic(). Fix is simple: just initialize m->bank in the case of a fatal error. Fixes: 40c36e27 ("x86/mce: Fix incorrect "Machine check from unknown source" message") Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: x86-ml <x86@kernel.org> Cc: stable@vger.kernel.org # v4.18 Note pre-v5.0 arch/x86/kernel/cpu/mce/core.c was called arch/x86/kernel/cpu/mcheck/mce.c Link: https://lkml.kernel.org/r/20190201003341.10638-1-tony.luck@intel.comSigned-off-by:
-
Kan Liang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 9e63a789 upstream. Some PCI uncore PMUs cannot be registered on an 8-socket system (HPE Superdome Flex). To understand which Socket the PCI uncore PMUs belongs to, perf retrieves the local Node ID of the uncore device from CPUNODEID(0xC0) of the PCI configuration space, and the mapping between Socket ID and Node ID from GIDNIDMAP(0xD4). The Socket ID can be calculated accordingly. The local Node ID is only available at bit 2:0, but current code doesn't mask it. If a BIOS doesn't clear the rest of the bits, an incorrect Node ID will be fetched. Filter the Node ID by adding a mask. Reported-by:
Song Liu <songliubraving@fb.com> Tested-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 07c69f11 upstream. (!x & y) strikes again. Fix bitwise and boolean operations by enclosing the expression: intcsr & (1 << NET2272_PCI_IRQ) in parentheses, before applying the boolean operator '!'. Notice that this code has been there since 2011. So, it would be helpful if someone can double-check this. This issue was detected with the help of Coccinelle. Fixes: ceb80363 ("USB: net2272: driver for PLX NET2272 USB device controller") Cc: stable@vger.kernel.org Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Bin Liu authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit a53469a6 upstream. power off the phy should be done before populate the phy. Otherwise, am335x_init() could be called by the phy owner to power on the phy first, then am335x_phy_probe() turns off the phy again without the caller knowing it. Fixes: 2fc711d7 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Leonid Iziumtsev authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 341198ed upstream. Once the "ld_queue" list is not empty, next descriptor will migrate into "ld_active" list. The "desc" variable will be overwritten during that transition. And later the dmaengine_desc_get_callback_invoke() will use it as an argument. As result we invoke wrong callback. That behaviour was in place since: commit fcaaba6c ("dmaengine: imx-dma: fix callback path in tasklet"). But after commit 4cd13c21 ("softirq: Let ksoftirqd do its job") things got worse, since possible delay between tasklet_schedule() from DMA irq handler and actual tasklet function execution got bigger. And that gave more time for new DMA request to be submitted and to be put into "ld_queue" list. It has been noticed that DMA issue is causing problems for "mxc-mmc" driver. While stressing the system with heavy network traffic and writing/reading to/from sd card simultaneously the timeout may happen: 10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900) That often lead to file system corruption. Signed-off-by:
Leonid Iziumtsev <leonid.iziumtsev@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 97e1532e upstream. Dereferencing req->page_descs[0] will Oops if req->max_pages is zero. Reported-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com Tested-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com Fixes: b2430d75 ("fuse: add per-page descriptor <offset, length> to fuse_req") Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit a2ebba82 upstream. NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not the page cache page. Fixes: 8b284dc4 ("fuse: writepages: handle same page rewrites") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 9509941e upstream. Some of the pipe_buf_release() handlers seem to assume that the pipe is locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page without taking any extra locks. From a glance through the callers of pipe_buf_release(), it looks like FUSE is the only one that calls pipe_buf_release() without having the pipe locked. This bug should only lead to a memory leak, nothing terrible. Fixes: dd3bb14f ("fuse: support splice() writing to fuse device") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 305a0ade upstream. In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 4f2ab5e1 upstream. It is normal user behaviour to start, stop, then start a stream again without closing it. Currently this works for compressed playback streams but not capture ones. The states on a compressed capture stream go directly from OPEN to PREPARED, unlike a playback stream which moves to SETUP and waits for a write of data before moving to PREPARED. Currently however, when a stop is sent the state is set to SETUP for both types of streams. This leaves a capture stream in the situation where a new start can't be sent as that requires the state to be PREPARED and a new set_params can't be sent as that requires the state to be OPEN. The only option being to close the stream, and then reopen. Correct this issues by allowing snd_compr_drain_notify to set the state depending on the stream direction, as we already do in set_params. Fixes: 49bb6402 ("ALSA: compress_core: Add support for capture streams") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rundong Ge authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 17ab4f61 ] The unbalance of master's promiscuity or allmulti will happen after ifdown and ifup a slave interface which is in a bridge. When we ifdown a slave interface , both the 'dsa_slave_close' and 'dsa_slave_change_rx_flags' will clear the master's flags. The flags of master will be decrease twice. In the other hand, if we ifup the slave interface again, since the slave's flags were cleared the 'dsa_slave_open' won't set the master's flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if' will set the master's flags. The flags of master is increase once. Only propagating flag changes when a slave interface is up makes sure this does not happen. The 'vlan_dev_change_rx_flags' had the same problem and was fixed, and changes here follows that fix. Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by:
Rundong Ge <rdong.ge@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 8dfb8d2c ] Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 294c149a ] The "p" buffer is 0x4000 bytes long. B3_RI_WTO_R1 is 0x190. The value of "regs->len" is in the 1-0x4000 range. The bug here is that "regs->len - B3_RI_WTO_R1" can be a negative value which would lead to memory corruption and an abrupt crash. Fixes: c3f8be96 ("[PATCH] skge: expand ethtool debug register dump") Signed-off-by:
-
Sebastian Andrzej Siewior authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 53bc8d2a ] During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 7596175e ] In case of IPv6 pkts, ipv4_csum_ok is 0. Because of this, driver does not set skb->ip_summed. So IPv6 rx checksum is not offloaded. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 9b1f19d8 ] Similarly to commit 276bdb82 ("dccp: check ccid before dereferencing") it is wise to test for a NULL ccid. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b kobject: 'loop5' (0000000080f78fc1): kobject_uevent_env RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 000000008db5e000 CR4: 00000000001406e0 kobject: 'loop5' (0000000080f78fc1): fill_kobj_path: path = '/devices/virtual/block/loop5' DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_rcv_state_process+0x2b6/0x1af6 net/dccp/input.c:654 dccp_v4_do_rcv+0x100/0x190 net/dccp/ipv4.c:688 sk_backlog_rcv include/net/sock.h:936 [inline] __sk_receive_skb+0x3a9/0xea0 net/core/sock.c:473 dccp_v4_rcv+0x10cb/0x1f80 net/dccp/ipv4.c:880 ip_protocol_deliver_rcu+0xb6/0xa20 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1f0/0x740 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1f4/0x2f0 net/ipv4/ip_input.c:414 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xed/0x620 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core+0x160/0x210 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 process_backlog+0x206/0x750 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x76d/0x1930 net/core/dev.c:6412 __do_softirq+0x30b/0xb11 kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace 58a0ba03bea2c376 ]--- RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 0000000009871000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Tejun Heo authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 08a77676 upstream. e7fd37ba ("cgroup: avoid copying strings longer than the buffers") converted possibly unsafe strncpy() usages in cgroup to strscpy(). However, although the callsites are completely fine with truncated copied, because strscpy() is marked __must_check, it led to the following warnings. kernel/cgroup/cgroup.c: In function ‘cgroup_file_name’: kernel/cgroup/cgroup.c:1400:10: warning: ignoring return value of ‘strscpy’, declared with attribute warn_unused_result [-Wunused-result] strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX); ^ To avoid the warnings, 50034ed4 ("cgroup: use strlcpy() instead of strscpy() to avoid spurious warning") switched them to strlcpy(). strlcpy() is worse than strlcpy() because it unconditionally runs strlen() on the source string, and the only reason we switched to strlcpy() here was because it was lacking __must_check, which doesn't reflect any material differences between the two function. It's just that someone added __must_check to strscpy() and not to strlcpy(). These basic string copy operations are used in variety of ways, and one of not-so-uncommon use cases is safely handling truncated copies, where the caller naturally doesn't care about the return value. The __must_check doesn't match the actual use cases and forces users to opt for inferior variants which lack __must_check by happenstance or spread ugly (void) casts. Remove __must_check from strscpy() and restore strscpy() usages in cgroup. Signed-off-by:
Tejun Heo <tj@kernel.org> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> [backport only the string.h portion to remove build warnings starting to show up - gregkh] Signed-off-by:
-
Guoqing Jiang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 29e270fc upstream. Got below warning with gcc 8.2 compiler. net/tipc/topsrv.c: In function ‘tipc_topsrv_start’: net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(srv->name, name, strlen(name) + 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/topsrv.c:660:27: note: length computed here strncpy(srv->name, name, strlen(name) + 1); ^~~~~~~~~~~~ So change it to correct length and use strscpy. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit b1286ed7 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Eduardo Valentin authored
BugLink: https://bugs.launchpad.net/bugs/1818813 commit 03334ba8 upstream. Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793 ("thermal: hwmon: move hwmon support to single file") Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Oleg Nesterov authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 8099b047 ] load_script() simply truncates bprm->buf and this is very wrong if the length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently truncate i_arg or (worse) we can execute the wrong binary if buf[2:126] happens to be the valid executable path. Change load_script() to return ENOEXEC if it can't find '\n' or zero in bprm->buf. Note that '\0' can come from either prepare_binprm()->memset() or from kernel_read(), we do not care. Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.comSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Ben Woodard <woodard@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 76699a67 ] The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Reviewed-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 304ae427 ] check_hung_uninterruptible_tasks() is currently calling rcu_lock_break() for every 1024 threads. But check_hung_task() is very slow if printk() was called, and is very fast otherwise. If many threads within some 1024 threads called printk(), the RCU grace period might be extended enough to trigger RCU stall warnings. Therefore, calling rcu_lock_break() for every some fixed jiffies will be safer. Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 6ae16dfb ] In lenovo_probe_tpkbd(), the function of_led_classdev_register() could return an error value that is unchecked. The fix adds these checks. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 296dcc40 ] When the block device is opened with FMODE_EXCL, ref_count is set to -1. This value doesn't get reset when the device is closed which means the device cannot be opened again. Fix this by checking for refcount <= 0 in the release method. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1818813 [ Upstream commit 093c4821 ] In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through kzalloc() and is used to hold the information of the gdrom device. To register and unregister the device, the pointer 'gd.cd_info' is passed to the functions register_cdrom() and unregister_cdrom(), respectively. However, this buffer is not freed after it is used, which can cause a memory leak bug. This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the above issue. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
