Pull xen fix from Juergen Gross:
 "A single fix for an issue introduced this development cycle: when
  running as a Xen guest on Arm systems the kernel will hang during
  boot"

* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Don't probe xenbus as part of an early initcall

Pull RISC-V fix from Palmer Dabbelt:
 "A single fix this week: the removal of the GPIO reset method for the
  Ethernet phy on the HiFive Unleashed.

  This returns to relying on the bootloader's phy reset sequence, which
  we'll have to continue doing until we can sort out how to get the
  Linux phy driver to perform the special reset dance required for this
  phy"

* tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "dts: phy: add GPIO number and active state used for phy reset"

Pull arm64 fix from Catalin Marinas:
 "Fix PTRACE_PEEKMTETAGS access to an mmapped region before the first
  write"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page

The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user
page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged
page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns
-EIO.

A newly created (PROT_MTE) mapping points to the zero page which had its
tags zeroed during cpu_enable_mte(). If there were no prior writes to
this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero
page does not have the PG_mte_tagged flag set.

Set PG_mte_tagged on the zero page when its tags are cleared during
boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on
!PROT_MTE mappings pointing to the zero page, change the
__access_remote_tags() check to (vm_flags & VM_MTE) instead of
PG_mte_tagged.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.com

Pull powerpc fix from Michael Ellerman:
 "One fix for a regression seen in io_uring, introduced by our support
  for KUAP (Kernel User Access Prevention) with the Hash MMU.

  Thanks to Aneesh Kumar K.V, and Zorro Lang"

* tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kuap: Allow kernel thread to access userspace after kthread_use_mm

Pull gpio fixes from Bartosz Golaszewski:
 "This is hopefully the last batch of fixes for this release cycle. We
  have a minor fix for a Kconfig regression as well as fixes for older
  bugs in gpio-ep93xx:

   - don't build gpio-mxs unconditionally with COMPILE_TEST enabled

   - fix two problems with interrupt handling in gpio-ep93xx"

* tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ep93xx: Fix single irqchip with multi gpiochips
  gpio: ep93xx: fix BUG_ON port F usage
  gpio: mxs: GPIO_MXS should not default to y unconditionally

After Commit 3499ba81 ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.

If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).

We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.

After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.

Cc: stable@vger.kernel.org
Fixes: 3499ba81 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.orgSigned-off-by: Juergen Gross <jgross@suse.com>

VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support.  As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly.  We've been relying on
bootloaders to reset the device for years, with this revert we'll go
back to doing so until we can sort out how to get the reset sequence
into the kernel.

This reverts commit a0fa9d72.

Fixes: a0fa9d72 ("dts: phy: add GPIO number and active state used for phy reset")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull power management fixes from Rafael Wysocki:
 "Address a performance regression related to scale-invariance on x86
  that may prevent turbo CPU frequencies from being used in certain
  workloads on systems using acpi-cpufreq as the CPU performance scaling
  driver and schedutil as the scaling governor"

* tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there
  cpufreq: ACPI: Extend frequency tables to cover boost frequencies

Pull ACPI fix from Rafael Wysocki:
 "Revert a problematic ACPICA commit that changed the code to attempt to
  update memory regions which may be read-only on some systems (Ard
  Biesheuvel)"

* tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"

Pull dmaengine fixes from Vinod Koul:
 "Some late fixes for dmaengine:

  Core:
   - fix channel device_node deletion

  Driver fixes:
   - dw: revert of runtime pm enabling
   - idxd: device state fix, interrupt completion and list corruption
   - ti: resource leak

* tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine dw: Revert "dmaengine: dw: Enable runtime PM"
  dmaengine: idxd: check device state before issue command
  dmaengine: ti: k3-udma: Fix a resource leak in an error handling path
  dmaengine: move channel device_node deletion to driver
  dmaengine: idxd: fix misc interrupt completion
  dmaengine: idxd: Fix list corruption in description completion

Pull networking fixes from David Miller:
 "Another pile of networing fixes:

   1) ath9k build error fix from Arnd Bergmann

   2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.

   3) bpf int3 kprobe fix from Alexei Starovoitov.

   4) bpf stackmap integer overflow fix from Bui Quang Minh.

   5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
      Christoph Schemmel.

   6) Don't update deleted entry in xt_recent netfilter module, from
      Jazsef Kadlecsik.

   7) Use after free in nftables, fix from Pablo Neira Ayuso.

   8) Header checksum fix in flowtable from Sven Auhagen.

   9) Validate user controlled length in qrtr code, from Sabyrzhan
      Tasbolatov.

  10) Fix race in xen/netback, from Juergen Gross,

  11) New device ID in cxgb4, from Raju Rangoju.

  12) Fix ring locking in rxrpc release call, from David Howells.

  13) Don't return LAPB error codes from x25_open(), from Xie He.

  14) Missing error returns in gsi_channel_setup() from Alex Elder.

  15) Get skb_copy_and_csum_datagram working properly with odd segment
      sizes, from Willem de Bruijn.

  16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.

  17) Do teardown on probe failure in DSA, from Vladimir Oltean.

  18) Fix compilation failures of txtimestamp selftest, from Vadim
      Fedorenko.

  19) Limit rx per-napi gro queue size to fix latency regression, from
      Eric Dumazet.

  20) dpaa_eth xdp fixes from Camelia Groza.

  21) Missing txq mode update when switching CBS off, in stmmac driver,
      from Mohammad Athari Bin Ismail.

  22) Failover pending logic fix in ibmvnic driver, from Sukadev
      Bhattiprolu.

  23) Null deref fix in vmw_vsock, from Norbert Slusarek.

  24) Missing verdict update in xdp paths of ena driver, from Shay
      Agroskin.

  25) seq_file iteration fix in sctp from Neil Brown.

  26) bpf 32-bit src register truncation fix on div/mod, from Daniel
      Borkmann.

  27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.

  28) Fix locking in vsock_shutdown(), from Stefano Garzarella.

  29) Various missing index bound checks in hns3 driver, from Yufeng Mo.

  30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
      Vladimir Oltean.

  31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
      Vultur.

  32) Fix locking during netif_tx_disable(), from Edwin Peer"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  bpf: Fix 32 bit src register truncation on div/mod
  bpf: Fix verifier jmp32 pruning decision logic
  bpf: Fix verifier jsgt branch analysis on max bound
  vsock: fix locking in vsock_shutdown()
  net: hns3: add a check for index in hclge_get_rss_key()
  net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
  net: hns3: add a check for queue_id in hclge_reset_vf_queue()
  net: dsa: felix: implement port flushing on .phylink_mac_link_down
  switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
  bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
  net: watchdog: hold device global xmit lock during tx disable
  netfilter: nftables: relax check for stateful expressions in set definition
  netfilter: conntrack: skip identical origin tuple in same zone only
  vsock/virtio: update credit only if socket is not closed
  net: fix iteration for sctp transport seq_files
  net: ena: Update XDP verdict upon failure
  net/vmw_vsock: improve locking in vsock_connect_timeout()
  net/vmw_vsock: fix NULL pointer dereference
  ibmvnic: Clear failover_pending if unable to schedule
  net: stmmac: set TxQ mode back to DCB after disabling CBS
  ...

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (kasan, mremap, tmpfs,
  selftests, memcg, and slub), MAINTAINERS, squashfs, nilfs2, and
  firmware"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  nilfs2: make splice write available again
  mm, slub: better heuristic for number of cpus when calculating slab order
  Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
  MAINTAINERS: update Andrey Ryabinin's email address
  selftests/vm: rename file run_vmtests to run_vmtests.sh
  tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha
  tmpfs: disallow CONFIG_TMPFS_INODE64 on s390
  mm/mremap: fix BUILD_BUG_ON() error in get_extent
  firmware_loader: align .builtin_fw to 8
  kasan: fix stack traces dependency for HW_TAGS
  squashfs: add more sanity checks in xattr id lookup
  squashfs: add more sanity checks in inode lookup
  squashfs: add more sanity checks in id lookup
  squashfs: avoid out of bounds writes in decompressors

Since 5.10, splice() or sendfile() to NILFS2 return EINVAL.  This was
caused by commit 36e2c742 ("fs: don't allow splice read/write
without explicit ops").

This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.

Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.comSigned-off-by: Joachim Henke <joachim.henke@t-systems.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>	[5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When creating a new kmem cache, SLUB determines how large the slab pages
will based on number of inputs, including the number of CPUs in the
system.  Larger slab pages mean that more objects can be allocated/free
from per-cpu slabs before accessing shared structures, but also
potentially more memory can be wasted due to low slab usage and
fragmentation.  The rough idea of using number of CPUs is that larger
systems will be more likely to benefit from reduced contention, and also
should have enough memory to spare.

Number of CPUs used to be determined as nr_cpu_ids, which is number of
possible cpus, but on some systems many will never be onlined, thus
commit 045ab8c9 ("mm/slub: let number of online CPUs determine the
slub page order") changed it to nr_online_cpus().  However, for kmem
caches created early before CPUs are onlined, this may lead to
permamently low slab page sizes.

Vincent reports a regression [1] of hackbench on arm64 systems:

  "I'm facing significant performances regression on a large arm64
   server system (224 CPUs). Regressions is also present on small arm64
   system (8 CPUs) but in a far smaller order of magnitude

   On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16
   v5.11-rc4 : 9.135sec (+/- 0.45%)
   v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%)
   v5.10: 3.136sec (+/- 0.40%)"

Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting
page allocator contention:

  "i.e. the patch incurs a 7% to 32% performance penalty. This bisected
   cleanly yesterday when I was looking for the regression and then
   found the thread.

   Numerous caches change size. For example, kmalloc-512 goes from
   order-0 (vanilla) to order-2 with the revert.

   So mostly this is down to the number of times SLUB calls into the
   page allocator which only caches order-0 pages on a per-cpu basis"

Clearly num_online_cpus() doesn't work too early in bootup.  We could
change the order dynamically in a memory hotplug callback, but runtime
order changing for existing kmem caches has been already shown as
dangerous, and removed in 32a6f409 ("mm, slub: remove runtime
allocation order changes").

It could be resurrected in a safe manner with some effort, but to fix
the regression we need something simpler.

We could use num_present_cpus() that should be the number of physically
present CPUs even before they are onlined.  That would work for PowerPC
[3], which triggered the original commit, but that still doesn't work on
arm64 [4] as explained in [5].

So this patch tries to determine the best available value without
specific arch knowledge.

 - num_present_cpus() if the number is larger than 1, as that means the
   arch is likely setting it properly

 - nr_cpu_ids otherwise

This should fix the reported regressions while also keeping the effect
of 045ab8c9 for PowerPC systems.  It's possible there are
configurations where num_present_cpus() is 1 during boot while
nr_cpu_ids is at the same time bloated, so these (if they exist) would
keep the large orders based on nr_cpu_ids as was before 045ab8c9.

[1] https://lore.kernel.org/linux-mm/CAKfTPtA_JgMf_+zdFbcb_V9rM7JBWNPjAz9irgwFj7Rou=xzZg@mail.gmail.com/
[2] https://lore.kernel.org/linux-mm/20210128134512.GF3592@techsingularity.net/
[3] https://lore.kernel.org/linux-mm/20210123051607.GC2587010@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/CAKfTPtAjyVmS5VYvU6DBxg4-JEo5bdmWbngf-03YsY18cmWv_g@mail.gmail.com/
[5] https://lore.kernel.org/linux-mm/20210126230305.GD30941@willie-the-truck/

Link: https://lkml.kernel.org/r/20210208134108.22286-1-vbabka@suse.cz
Fixes: 045ab8c9 ("mm/slub: let number of online CPUs determine the slub page order")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes the following warnings which results in interrupts disabled on
port B/F:

gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.

- added separate irqchip for each interrupt capable gpiochip
- provided unique names for each irqchip

Fixes: d2b09196 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Two index spaces and ep93xx_gpio_port are confusing.

Instead add a separate struct to store necessary data and remove
ep93xx_gpio_port.

- add struct to store IRQ related data for each IRQ capable chip
- replace offset array with defined offsets
- add IRQ registers offset for each IRQ capable chip into
  ep93xx_gpio_banks

------------[ cut here ]------------
kernel BUG at drivers/gpio/gpio-ep93xx.c:64!
---[ end trace 3f6544e133e9f5ae ]---

Fixes: fd935fc4 ("gpio: ep93xx: Do not pingpong irq numbers")
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS,
and ask the user in case of compile-testing.

Fixes: 6876ca31 ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Daniel Borkmann says:

====================
pull-request: bpf 2021-02-10

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 3 files changed, 22 insertions(+), 21 deletions(-).

The main changes are:

1) Fix missed execution of kprobes BPF progs when kprobe is firing via
   int3, from Alexei Starovoitov.

2) Fix potential integer overflow in map max_entries for stackmap on
   32 bit archs, from Bui Quang Minh.

3) Fix a verifier pruning and a insn rewrite issue related to 32 bit ops,
   from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
c# Please enter a commit message to explain why this merge is necessary,

This reverts commit 536d3bf2, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.

Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta.  After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit.  However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.

This is causing problems in Facebook production.  A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads.  We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.

To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way.  However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.

The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below.  Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.

However, erroneous throttling also caused problems in other scenarios at
around the same time.  This resulted in commit b3ff9291 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit.  When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that.  This is in line with regular limit
enforcement - i.e.  if the workload allocates up against or over an
otherwise unchanged limit from below.

With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.

Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org
Fixes: 536d3bf2 ("mm: memcontrol: avoid workload stalls when lowering memory.high")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>	[5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update my email, @virtuozzo.com will stop working shortly.

Link: https://lkml.kernel.org/r/20210204223904.3824-1-ryabinin.a.a@gmail.comSigned-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c2aa8afc has renamed run_vmtests in Makefile, but the file
still uses the old name.

The kernel test robot reported the following issue:

  # selftests: vm: run_vmtests.sh
  # Warning: file run_vmtests.sh is missing!
  not ok 1 selftests: vm: run_vmtests.sh

Link: https://lkml.kernel.org/r/20210205085507.1479894-1-rong.a.chen@intel.com
Fixes: c2aa8afc (selftests/vm: rename run_vmtests --> run_vmtests.sh)
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As with s390, alpha is a 64-bit architecture with a 32-bit ino_t.  With
CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and
display "inode64" in the mount options, whereas passing "inode64" in the
mount options will fail.  This leads to erroneous behaviours such as
this:

  # mkdir mnt
  # mount -t tmpfs nodev mnt
  # mount -o remount,rw mnt
  mount: /home/ubuntu/mnt: mount point not mounted or bad option.

Prevent CONFIG_TMPFS_INODE64 from being selected on alpha.

Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com
Fixes: ea3271f7 ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>	[5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently there is an assumption in tmpfs that 64-bit architectures also
have a 64-bit ino_t.  This is not true on s390 which has a 32-bit ino_t.
With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers
and display "inode64" in the mount options, but passing the "inode64"
mount option will fail.  This leads to the following behavior:

  # mkdir mnt
  # mount -t tmpfs nodev mnt
  # mount -o remount,rw mnt
  mount: /home/ubuntu/mnt: mount point not mounted or bad option.

As mount sees "inode64" in the mount options and thus passes it in the
options for the remount.

So prevent CONFIG_TMPFS_INODE64 from being selected on s390.

Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com
Fixes: ea3271f7 ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org>	[5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clang can't evaluate this function argument at compile time when the
function is not inlined, which leads to a link time failure:

  ld.lld: error: undefined symbol: __compiletime_assert_414
  >>> referenced by mremap.c
  >>>               mremap.o:(get_extent) in archive mm/built-in.a

Mark the function as __always_inline to avoid it.

Link: https://lkml.kernel.org/r/20201230154104.522605-1-arnd@kernel.org
Fixes: 9ad9718b ("mm/mremap: calculate extent in one place")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64 references the start address of .builtin_fw (__start_builtin_fw)
with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC
relocations.  The compiler is allowed to emit the
R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in
include/linux/firmware.h is 8-byte aligned.

The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a
multiple of 8, which may not be the case if .builtin_fw is empty.
Unconditionally align .builtin_fw to fix the linker error.  32-bit
architectures could use ALIGN(4) but that would add unnecessary
complexity, so just use ALIGN(8).

Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1204
Fixes: 5658c769 ("firmware: allow firmware files to be built into kernel image")
Signed-off-by: Fangrui Song <maskray@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, whether the alloc/free stack traces collection is enabled by
default for hardware tag-based KASAN depends on CONFIG_DEBUG_KERNEL.
The intention for this dependency was to only enable collection on slow
debug kernels due to a significant perf and memory impact.

As it turns out, CONFIG_DEBUG_KERNEL is not considered a debug option
and is enabled on many productions kernels including Android and Ubuntu.
As the result, this dependency is pointless and only complicates the
code and documentation.

Having stack traces collection disabled by default would make the
hardware mode work differently to to the software ones, which is
confusing.

This change removes the dependency and enables stack traces collection
by default.

Looking into the future, this default might makes sense for production
kernels, assuming we implement a fast stack trace collection approach.

Link: https://lkml.kernel.org/r/6678d77ceffb71f1cff2cf61560e2ffe7bb6bfe9.1612808820.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sysbot has reported a warning where a kmalloc() attempt exceeds the
maximum limit.  This has been identified as corruption of the xattr_ids
count when reading the xattr id lookup table.

This patch adds a number of additional sanity checks to detect this
corruption and others.

1. It checks for a corrupted xattr index read from the inode.  This could
   be because the metadata block is uncompressed, or because the
   "compression" bit has been corrupted (turning a compressed block
   into an uncompressed block).  This would cause an out of bounds read.

2. It checks against corruption of the xattr_ids count.  This can either
   lead to the above kmalloc failure, or a smaller than expected
   table to be read.

3. It checks the contents of the index table for corruption.

[phillip@squashfs.org.uk: fix checkpatch issue]
  Link: https://lkml.kernel.org/r/270245655.754655.1612770082682@webmail.123-reg.co.uk

Link: https://lkml.kernel.org/r/20210204130249.4495-5-phillip@squashfs.org.ukSigned-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+2ccea6339d368360800d@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sysbot has reported an "slab-out-of-bounds read" error which has been
identified as being caused by a corrupted "ino_num" value read from the
inode.  This could be because the metadata block is uncompressed, or
because the "compression" bit has been corrupted (turning a compressed
block into an uncompressed block).

This patch adds additional sanity checks to detect this, and the
following corruption.

1. It checks against corruption of the inodes count.  This can either
   lead to a larger table to be read, or a smaller than expected
   table to be read.

   In the case of a too large inodes count, this would often have been
   trapped by the existing sanity checks, but this patch introduces
   a more exact check, which can identify too small values.

2. It checks the contents of the index table for corruption.

[phillip@squashfs.org.uk: fix checkpatch issue]
  Link: https://lkml.kernel.org/r/527909353.754618.1612769948607@webmail.123-reg.co.uk

Link: https://lkml.kernel.org/r/20210204130249.4495-4-phillip@squashfs.org.ukSigned-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+04419e3ff19d2970ea28@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sysbot has reported a number of "slab-out-of-bounds reads" and
"use-after-free read" errors which has been identified as being caused
by a corrupted index value read from the inode.  This could be because
the metadata block is uncompressed, or because the "compression" bit has
been corrupted (turning a compressed block into an uncompressed block).

This patch adds additional sanity checks to detect this, and the
following corruption.

1. It checks against corruption of the ids count.  This can either
   lead to a larger table to be read, or a smaller than expected
   table to be read.

   In the case of a too large ids count, this would often have been
   trapped by the existing sanity checks, but this patch introduces
   a more exact check, which can identify too small values.

2. It checks the contents of the index table for corruption.

Link: https://lkml.kernel.org/r/20210204130249.4495-3-phillip@squashfs.org.ukSigned-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+b06d57ba83f604522af2@syzkaller.appspotmail.com
Reported-by: syzbot+c021ba012da41ee9807c@syzkaller.appspotmail.com
Reported-by: syzbot+5024636e8b5fd19f0f19@syzkaller.appspotmail.com
Reported-by: syzbot+bcbc661df46657d0fa4f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Squashfs: fix BIO migration regression and add sanity checks".

Patch [1/4] fixes a regression introduced by the "migrate from
ll_rw_block usage to BIO" patch, which has produced a number of
Sysbot/Syzkaller reports.

Patches [2/4], [3/4], and [4/4] fix a number of filesystem corruption
issues which have produced Sysbot reports in the id, inode and xattr
lookup code.

Each patch has been tested against the Sysbot reproducers using the
given kernel configuration.  They have the appropriate "Reported-by:"
lines added.

Additionally, all of the reproducer filesystems are indirectly fixed by
patch [4/4] due to the fact they all have xattr corruption which is now
detected there.

Additional testing with other configurations and architectures (32bit,
big endian), and normal filesystems has also been done to trap any
inadvertent regressions caused by the additional sanity checks.

This patch (of 4):

This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".

Sysbot/Syskaller has reported a number of "out of bounds writes" and
"unable to handle kernel paging request in squashfs_decompress" errors
which have been identified as a regression introduced by the above
patch.

Specifically, the patch removed the following sanity check

        if (length < 0 || length > output->length ||
		(index + length) > msblk->bytes_used)

This check did two things:

1. It ensured any reads were not beyond the end of the filesystem

2. It ensured that the "length" field read from the filesystem
   was within the expected maximum length.  Without this any
   corrupted values can over-run allocated buffers.

Link: https://lkml.kernel.org/r/20210204130249.4495-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20210204130249.4495-2-phillip@squashfs.org.uk
Fixes: 93e72b3c ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: syzbot+6fba78f99b9afd4b5634@syzkaller.appspotmail.com
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Philippe Liard <pliard@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i3c fix from Alexandre Belloni:
 "A single build warning fix"

* tag 'i3c/fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c/master/mipi-i3c-hci: Fix position of __maybe_unused in i3c_hci_of_match

While reviewing a different fix, John and I noticed an oddity in one of the
BPF program dumps that stood out, for example:

  # bpftool p d x i 13
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
  [...]

In line 2 we noticed that the mov32 would 32 bit truncate the original src
register for the div/mod operation. While for the two operations the dst
register is typically marked unknown e.g. from adjust_scalar_min_max_vals()
the src register is not, and thus verifier keeps tracking original bounds,
simplified:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = -1
  1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=invP-1 R1_w=invP-1 R10=fp0
  2: (3c) w0 /= w1
  3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0
  3: (77) r1 >>= 32
  4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0
  4: (bf) r0 = r1
  5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
  5: (95) exit
  processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0

Runtime result of r0 at exit is 0 instead of expected -1. Remove the
verifier mov32 src rewrite in div/mod and replace it with a jmp32 test
instead. After the fix, we result in the following code generation when
having dividend r1 and divisor r6:

  div, 64 bit:                             div, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (55) if r6 != 0x0 goto pc+2           2: (56) if w6 != 0x0 goto pc+2
   3: (ac) w1 ^= w1                         3: (ac) w1 ^= w1
   4: (05) goto pc+1                        4: (05) goto pc+1
   5: (3f) r1 /= r6                         5: (3c) w1 /= w6
   6: (b7) r0 = 0                           6: (b7) r0 = 0
   7: (95) exit                             7: (95) exit

  mod, 64 bit:                             mod, 32 bit:

   0: (b7) r6 = 8                           0: (b7) r6 = 8
   1: (b7) r1 = 8                           1: (b7) r1 = 8
   2: (15) if r6 == 0x0 goto pc+1           2: (16) if w6 == 0x0 goto pc+1
   3: (9f) r1 %= r6                         3: (9c) w1 %= w6
   4: (b7) r0 = 0                           4: (b7) r0 = 0
   5: (95) exit                             5: (95) exit

x86 in particular can throw a 'divide error' exception for div
instruction not only for divisor being zero, but also for the case
when the quotient is too large for the designated register. For the
edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT
since we always zero edx (rdx). Hence really the only protection
needed is against divisor being zero.

Fixes: 68fda450 ("bpf: fix 32-bit divide by zero")
Co-developed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:

  func#0 @0
  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 808464450
  1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b4) w4 = 808464432
  2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0
  2: (9c) w4 %= w0
  3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
  3: (66) if w4 s> 0x30303030 goto pc+0
   R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  4: (7f) r0 >>= r0
  5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
  5: (9c) w4 %= w0
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
  9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  9: (95) exit
  propagating r0

  from 6 to 7: safe
  4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
  4: (7f) r0 >>= r0
  5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
  5: (9c) w4 %= w0
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  propagating r0
  7: safe
  propagating r0

  from 6 to 7: safe
  processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1

The underlying program was xlated as follows:

  # bpftool p d x i 10
   0: (b7) r0 = 808464450
   1: (b4) w4 = 808464432
   2: (bc) w0 = w0
   3: (15) if r0 == 0x0 goto pc+1
   4: (9c) w4 %= w0
   5: (66) if w4 s> 0x30303030 goto pc+0
   6: (7f) r0 >>= r0
   7: (bc) w0 = w0
   8: (15) if r0 == 0x0 goto pc+1
   9: (9c) w4 %= w0
  10: (66) if w0 s> 0x3030 goto pc+0
  11: (d6) if w0 s<= 0x303030 goto pc+1
  12: (05) goto pc-1
  13: (95) exit

The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we are
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.

Taking a closer look at the verifier analysis, the reason is that it misjudges
its pruning decision at the first 'from 6 to 7: safe' occasion. What happens
is that while both old/cur registers are marked as precise, they get misjudged
for the jmp32 case as range_within() yields true, meaning that the prior
verification path with a wider register bound could be verified successfully
and therefore the current path with a narrower register bound is deemed safe
as well whereas in reality it's not. R0 old/cur path's bounds compare as
follows:

  old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff)
  cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff)

  old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff
  cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff

The 64 bit bounds generally look okay and while the information that got
propagated from 32 to 64 bit looks correct as well, it's not precise enough
for judging a conditional jmp32. Given the latter only operates on subregisters
we also need to take these into account as well for a range_within() probe
in order to be able to prune paths. Extending the range_within() constraint
to both bounds will be able to tell us that the old signed 32 bit bounds are
not wider than the cur signed 32 bit bounds.

With the fix in place, the program will now verify the 'goto' branch case as
it should have been:

  [...]
  6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  6: (66) if w0 s> 0x3030 goto pc+0
   R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
  9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
  9: (95) exit

  7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  7: (d6) if w0 s<= 0x303030 goto pc+1
   R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
  8: (30) r0 = *(u8 *)skb[808464432]
  BPF_LD_[ABS|IND] uses reserved fields
  processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1

The bug is quite subtle in the sense that when verifier would determine that
a given branch is dead code, it would (here: wrongly) remove these instructions
from the program and hard-wire the taken branch for privileged programs instead
of the 'goto pc-1' rewrites which will cause hard to debug problems.

Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return
code for both will tell the caller whether a given conditional jump is taken
or not, e.g. 1 means branch will be taken [for the involved registers] and the
goto target will be executed, 0 means branch will not be taken and instead we
fall-through to the next insn, and last but not least a -1 denotes that it is
not known at verification time whether a branch will be taken or not. Now while
the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the
branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval
since the branch will also be taken for reg->s32_max_value == sval. The jgt
branch analysis, for example, gets this right.

Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 4f7b3e82 ("bpf: improve verifier branch analysis")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) nf_conntrack_tuple_taken() needs to recheck zone for
   NAT clash resolution, from Florian Westphal.

2) Restore support for stateful expressions when set definition
   specifies no stateful expressions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: fixes for -net

The parameters sent from vf may be unreliable. If these
parameters are used directly, memory overwriting may occur.

So this series adds some checks for this case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this index before using it in hclge_get_rss_key().

Fixes: a638b1d8 ("net: hns3: fix get VF RSS issue")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tqp_index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this tqp_index before using it in hclge_get_ring_chain_from_mbx().

Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>