- 03 Apr, 2024 5 commits
-
-
Amadeusz Sławiński authored
card_headset_pins is never modified, mark it const. Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://msgid.link/r/20240403093145.3375857-5-amadeuszx.slawinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Amadeusz Sławiński authored
probing_link is passed to devm_kmemdup, and is never modified, may as well mark it const. Reviewed-by:
-
Amadeusz Sławiński authored
FW name is constant and we just duplicate it, use const variant of devm_kstrdup to possibly save a bit of memory. Reviewed-by:
-
Amadeusz Sławiński authored
HDA codec name is constant and we just duplicate it, use const variant of devm_kstrdup to possibly save a bit of memory. Reviewed-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: These are Renesas Sound driver cleanups for Gen3/Gen4.
-
- 02 Apr, 2024 34 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small changes with 3 cppcheck fixes and the firmware version now visible with debugfs instead of only via dmesg logs.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset contains important updates for SoundWire support. We initially implemented support for multiple amplifiers on different links using a single HDaudio DMA transfer. To align with the other OS, the 'aggregation' is now supported by the firmware. This change in directions has kernel impacts, since we now have multiple HDaudio DMAs to program and start, but since there are no platforms released so far there's no end-user impact. In addition, the behavior in case of xruns is improved by clearing the PCM states and better handling of the hw_free case. Note that the hw_free support will compile but will only be functional with the companion patch "soundwire: intel: add intel_free_stream() back" already applied in the SoundWire tree.
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: The first two patches change snd_soc_card_get_kcontrol() to use the core snd_ctl_find_id_mixer() functionality instead of open-coding its own list walk. The last patch adds a KUnit test for this, which was tested on the original and modified code.
-
Shengjiu Wang authored
Convert the fsl-asoc-card binding to YAML. When testing dtbs_check, found below compatible strings are not listed in document: fsl,imx-sgtl5000 fsl,imx53-cpuvo-sgtl5000 fsl,imx51-babbage-sgtl5000 fsl,imx53-m53evk-sgtl5000 fsl,imx53-qsb-sgtl5000 fsl,imx53-voipac-sgtl5000 fsl,imx6-armadeus-sgtl5000 fsl,imx6-rex-sgtl5000 fsl,imx6-sabreauto-cs42888 fsl,imx6-wandboard-sgtl5000 fsl,imx6dl-nit6xlite-sgtl5000 fsl,imx6q-ba16-sgtl5000 fsl,imx6q-nitrogen6_max-sgtl5000 fsl,imx6q-nitrogen6_som2-sgtl5000 fsl,imx6q-nitrogen6x-sgtl5000 fsl,imx6q-sabrelite-sgtl5000 fsl,imx6q-sabresd-wm8962 fsl,imx6q-udoo-ac97 fsl,imx6q-ventana-sgtl5000 fsl,imx6sl-evk-wm8962 fsl,imx6sx-sdb-mqs fsl,imx6sx-sdb-wm8962 fsl,imx7d-evk-wm8960 karo,tx53-audio-sgtl5000 tq,imx53-mba53-sgtl5000 So add them in yaml file to pass the test. Also correct the 'dai-format' to 'format' in document. For 'audio-routing', the items are not listed. Because this fsl-asoc-card is generic driver, which supports several codecs, if list all the items, there will be a long list. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://msgid.link/r/1711976056-19884-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Ranjani Sridharan authored
The node_id for multi-gateway ALH DAI's get overwritten with the group_id during the DAI copier's ipc_prepare op. So, save the ALH dai_index during the BE DAI hw_params in the dai_index field of struct ipc4_copier and use that to set the device ID in the configuration blob. This will avoid errors during copier init after an xrun. Note that the dai_index is typically set in topology for DMIC/SSP, but it's not used for ALH. Reclaiming this dai_index field to store the node_id does not generate a conflict with topology-defined values. Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
With the delayed stops, the xrun handling is problematic: the applications expects everything to be reset but the firmware and DMA are still in a PAUSED state. This patch makes sure the prepare while pending_stop is set is special-cased. Reviewed-by:
-
Pierre-Louis Bossart authored
Add a state variable to keep track of delayed stops, in case pcm_ops->platform_stop_during_hw_free is set. This patch should be iso-functionality, possibly removing no-op cases. The main purpose of this new state variable is to prepare a follow-up patch to reset all PCM and DMAs in case of stop/prepare xrun sequences. Reviewed-by:
-
Pierre-Louis Bossart authored
The same sequence is used twice, use common helper. Reviewed-by:
-
Pierre-Louis Bossart authored
For some reason the existing code stops on the first error, which potentially leaves the DMA and widgets in a weird state. Change to free-up all resources even in case of errors. Also add a more consistent error handling and logs, with the first error code returned to the caller. Reviewed-by:
-
Ranjani Sridharan authored
When an xrun happens, the BE DAI hw_params doesn't get invoked before the stream restarts with a prepare. In this case, clearing the node ID when the DAI widget is freed and unprepared will result in an error when it is re-initialized. In order to avoid this, move the code to clear the node ID to the BE DAI hw_free op to keep it balanced with the BE DAI hw_params. Reviewed-by:
-
Pierre-Louis Bossart authored
To allow using widget_to_sdev() in other files, move it as static inline in shared header file. Reviewed-by:
-
Pierre-Louis Bossart authored
The node_id value needs to be handled specifically for ALH. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Add intel_alh_id to set the expected gateway node_id in a follow-up patch. Reviewed-by:
-
Pierre-Louis Bossart authored
We've already defined the value for dai_index, let's use it instead of open-coding the same thing. No functionality change. Reviewed-by:
-
Pierre-Louis Bossart authored
We need to be able to set the dai config differently for SoundWire. Reviewed-by:
-
Bard Liao authored
sof_ipc4_dma_config_tlv{} is required for ACE2.x. The patch follow the convention to set the dma_stream_channel_map.mapping device as "link_id << 8 | pdi_id". And the mapping in sof_ipc4_alh_configuration_blob{} should be the same as dma_stream_channel_map.mapping in sof_ipc4_dma_config{}. The purposes of device id is to map DMA tlv. Signed-off-by: -
Bard Liao authored
We always use the lowest N channels of stream. So, set ch_mask to GENMASK(params_channels(params) - 1, 0). Signed-off-by:
-
Bard Liao authored
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv in the follow up commits. Signed-off-by:
-
Bard Liao authored
This reverts commit f8ba62ac. The SoundWire aggregated solution was to use one DMA on multiple links. But, the solution changed to use one DMA for each link. It means that we should assign HDaudio stream_tag for each cpu_dai. Signed-off-by:
-
Bard Liao authored
This reverts commit 699e146d. Don't reset device_count as we will use the multi-gateway firmware configuration. Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code derives the channel map used to program the HDaudio link DMA from the hw_params, but that is not quite right in the case of aggregation. The code in soc-pcm.c splits the hw_params depending on the codec_ch_map, and we need to reconstruct the channel-map to insert the data in the right places. This issue is seen only on amplifier feedback capture where the data from the second amplifier was replaced by that of the first amplifier. Note that the loop iterator of the macro for_each_rtd_cpu_dais() is reused in a following loop. This is different to all existing usages of that macro, hence the use of a boolean flag to avoid an access to an uninitialized variable. Fixes: 2960ee5c ("ASoC: SOF: Intel: hda-dai: add helpers for SoundWire callbacks") Reviewed-by:
-
Pierre-Louis Bossart authored
Cppcheck reports this: sound/soc/sof/ipc4-topology.c:569:23: style: Local variable 'sdev' shadows outer variable [shadowVariable] struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); ^ sound/soc/sof/ipc4-topology.c:512:22: note: Shadowed declaration struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); ^ sound/soc/sof/ipc4-topology.c:569:23: note: Shadow variable struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp); ^ Remove shadowed variable. Signed-off-by: -
Pierre-Louis Bossart authored
Somehow instance_id and id were mixed. Align on instance_id for consistency. Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck reports this issue: sound/soc/sof/amd/acp-loader.c:299:6: style: Variable 'ret' is reassigned a value before the old one has been used. [redundantAssignment] ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev); ^ sound/soc/sof/amd/acp-loader.c:289:6: note: ret is assigned ret = snd_sof_dsp_block_write(sdev, SOF_FW_BLK_TYPE_IRAM, 0, ^ sound/soc/sof/amd/acp-loader.c:299:6: note: ret is overwritten ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev); ^ This behavior is probably unintentional, there's no reason to return an error for the DRAM but not the IRAM. Signed-off-by: -
Yong Zhi authored
To check loaded FW version: $ hexdump -C /sys/kernel/debug/sof/fw_version 00000000 02 00 07 00 63 00 01 00 00 00 00 00 00 00 00 00 |....c...........| Reviewed-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Seven Lee authored
This patch is modified nau8325_dac_oversampl_enum enumerated. Use SOC_VALUE_ENUM instead to hide empty (presumably invalid) options. Signed-off-by:
Seven Lee <wtli@nuvoton.com> Link: https://msgid.link/r/20240401104753.3432507-1-wtli@nuvoton.comSigned-off-by:
-
Kuninori Morimoto authored
R-Car Gen1 and Gen4 doesn't have SCU, and current driver checks Gen1 (only) on each devices (A). But these drivers are assuming it might be not enabled after that (B). /* This driver doesn't support Gen1 at this point */ (A) if (rsnd_is_gen1(priv)) return 0; (B) node = rsnd_src_of_node(priv); if (!node) return 0; /* not used is not error */ Gen4 DT doesn't have these device settings. (A) check doesn't work for it, but (B) check handling it. Gen1 DT doesn't have these device settings either, and (A) is handling it, but (B) only is very enough. (A) is no longer needed. This patch removes (A) Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/87v850a4dl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Renesas Sound driver is using rsnd_is_genX() macro to handling difference. We can use "grep rsnd_is_gen" to find-out difference for each SoC today. In general, driver uses flag to handling SoC difference. But in Renesas Sound case, the differences are very specific, if you try to make it general, the code will become be very complicated. Some of them can use flag to handling, but we can find-out all diffence by using "grep rsnd_is_gen" today. It is not so good, but not so bad so far. So we will keep current style for a while. This patch cares Gen1/Gen2 exception by using negative handling to makes no more update for this part when we support Gen5 or later. - if (rsnd_is_gen3() || rsnd_is_gen4() || rsnd_is_gen5() || ...) + if (!rsnd_is_gen1() && !rsnd_is_gen2()) Signed-off-by:
-
Kuninori Morimoto authored
Renesas Sound driver is using rsnd_is_genX() macro to handling difference. We can use "grep rsnd_is_gen" to find-out difference for each SoC except rsnd_is_e3(). Let's put same rule for E3 as well. Signed-off-by:
-
Kuninori Morimoto authored
All SoC has reg-name, no need to support getting resource from ID any more. Remove it. To get physical address for DMA settings, it still need to know the index, but it is no longer fixed. This patch tidyup it. Signed-off-by:
-
Kuninori Morimoto authored
R-Car Sound is using almost same register mapping on each generation, therefore we can share it. Here indicates some memo/comments. SSI/SSIU/SCU have multi channels (SSI0 - SSI9 etc), but ADG is single, so, we don't need to have multi channel settings for it - rsnd_gen_regmap_init(..., 10, ..ADG, ...); + rsnd_gen_regmap_init(..., 1, ..ADG, ...); Gen4 added new SSI_BUSIF, but it is not used Gen4 calls rsnd_gen_regmap_init() for SDMC, but the address is calculated by rsnd_gen4_dma_addr(). It needs physical address, but other info are not needed. use NULL conf for it. - rsnd_gen_regmap_init(..., 10, ..SDMC, conf_sdmc); + rsnd_gen_regmap_init(..., 1, ..SDMC, conf_null); Gen4 have only SSI0/SSIU0, we don't need to have multi channel settings. - rsnd_gen_regmap_init(..., 10, ..SSI, ...); + rsnd_gen_regmap_init(..., 1, ..SSI, ...); SSI_MODE2 address is different between Gen2/3 and Gen4, but it is not used on Gen4. Thus we can share same regmap table. Gen2/3 : 0x808 Gen4 : 0xa0c Signed-off-by:
Khanh Le <khanh.le.xr@renesas.com> Link: https://msgid.link/r/871q7obiyt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Richard Fitzgerald authored
Add a new snd-soc-card KUnit test with a simple test case for snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked(). Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://msgid.link/r/20240401100210.61277-4-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
Use the snd_ctl_find_id_mixer[_locked]() wrapper in snd_soc_card_get_kcontrol[_locked]() instead of open-coding a custom list walk of the card controls list. Signed-off-by:
-
Richard Fitzgerald authored
Adds wrapper function snd_ctl_find_id_mixer_locked(). This is identical to snd_ctl_find_id_mixer() except that it can be called from code that is already holding controls_rwsem. Signed-off-by:
-
- 29 Mar, 2024 1 commit
-
-
Mark Brown authored
Merge series from Seven Lee <wtli@nuvoton.com>: Add a driver for the Nuvoton NAU88325.
-
