- 28 Feb, 2018 19 commits
-
-
Jiri Pirko authored
IP_TTL, IP_ECN and IP_DSCP are using the same offset within the scratchpad as L4 ports. Fix this by shifting all up. Fixes: 5f57e090 ("mlxsw: acl: Add ip ttl acl element") Fixes: i80d0fe47 ("mlxsw: acl: Add ip tos acl element") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2018-02-28 here are 3 smc bug fixes for the net-tree. Karsten's first patch is the reworked version of last week's "[PATCH net-next 2/5] net/smc: fix structure size" patch, now solved without using __packed, and now targetted for net instead of net-next. ==================== Signed-off-by: -
Davide Caratti authored
when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f3 smc: remote memory buffers (RMBs) Reported-and-tested-by: syzbot+aa0227369be2dcc26ebe@syzkaller.appspotmail.com Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Karsten Graul authored
The CONFIRM LINK reply message must contain the link_id sent by the server. And set the link_id explicitly when initializing the link. Signed-off-by:
Karsten Graul <kgraul@linux.vnet.ibm.com> Signed-off-by:
-
Karsten Graul authored
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the required 44 bytes. We need to use the constant value of SMC_WR_TX_SIZE to set and check the control message length. Signed-off-by:
-
Jason Wang authored
We try to disable NAPI to prevent a single XDP TX queue being used by multiple cpus. But we don't check if device is up (NAPI is enabled), this could result stall because of infinite wait in napi_disable(). Fixing this by checking device state through netif_running() before. Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Joey Pabalinas authored
The link to the pdf containing the algorithm description is now a dead link; it seems http://www.ifp.illinois.edu/~srikant/ has been moved to https://sites.google.com/a/illinois.edu/srikant/ and none of the original papers can be found there... I have replaced it with the only working copy I was able to find. n.b. there is also a copy available at: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.296.6350&rep=rep1&type=pdf However, this seems to only be a *cached* version, so I am unsure exactly how reliable that link can be expected to remain over time and have decided against using that one. Signed-off-by:
Joey Pabalinas <joeypabalinas@gmail.com> 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by:
-
Soheil Hassas Yeganeh authored
When the connection is reset, there is no point in keeping the packets on the write queue until the connection is closed. RFC 793 (page 70) and RFC 793-bis (page 64) both suggest purging the write queue upon RST: https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07 Moreover, this is essential for a correct MSG_ZEROCOPY implementation, because userspace cannot call close(fd) before receiving zerocopy signals even when the connection is reset. Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
David S. Miller authored
Yuchung Cheng says: ==================== tcp: revert a F-RTO extension due to broken middle-boxes This patch series reverts a (non-standard) TCP F-RTO extension that aimed to detect more spurious timeouts. Unfortunately it could result in poor performance due to broken middle-boxes that modify TCP packets. E.g. https://www.spinics.net/lists/netdev/msg484154.html We believe the best and simplest solution is to just revert the change. ==================== Signed-off-by:
-
Yuchung Cheng authored
This reverts commit 89fe18e4. While the patch could detect more spurious timeouts, it could cause poor TCP performance on broken middle-boxes that modifies TCP packets (e.g. receive window, SACK options). Since the performance gain is much smaller compared to the potential loss. The best solution is to fully revert the change. Fixes: 89fe18e4 ("tcp: extend F-RTO to catch more spurious timeouts") Reported-by:
Teodor Milkov <tm@del.bg> Signed-off-by:
-
Yuchung Cheng authored
This reverts commit cc663f4d. While fixing some broken middle-boxes that modifies receive window fields, it does not address middle-boxes that strip off SACK options. The best solution is to fully revert this patch and the root F-RTO enhancement. Fixes: cc663f4d ("tcp: restrict F-RTO to work-around broken middle-boxes") Reported-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-02-27 please apply some more qeth patches for -net and stable. One patch fixes a performance bug in the TSO path. Then there's several more fixes for IP management on L3 devices - including a revert, so that the subsequent fix cleanly applies to earlier kernels. The final patch takes care of a race in the control IO code that causes qeth to miss the cmd response, and subsequently trigger device recovery. ==================== Signed-off-by: -
Julian Wiedmann authored
If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Current code ("qeth_l3_ip_from_hash()") matches a queried address object against objects in the IP table by IP address, Mask/Prefix Length and MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually require is either a) "is this IP address registered" (ie. match by IP address only), before adding a new address. b) or "is this address object registered" (ie. match all relevant attributes), before deleting an address. Right now 1. the ADD path is too strict in its lookup, and eg. doesn't detect conflicts between an existing NORMAL address and a new VIPA address (because the NORMAL address will have mask != 0, while VIPA has a mask == 0), 2. the DELETE path is not strict enough, and eg. allows del_rxip() to delete a VIPA address as long as the IP address matches. Fix all this by adding helpers (_addr_match_ip() and _addr_match_all()) that do the appropriate checking. Note that the ADD path for NORMAL addresses is special, as qeth keeps track of how many times such an address is in use (and there is no immediate way of returning errors to the caller). So when a requested NORMAL address _fully_ matches an existing one, it's not considered a conflict and we merely increment the refcount. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: -
Julian Wiedmann authored
This reverts commit cb816192. The issue this attempted to fix never actually occurs. l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address was previously added to the card. If so, it returns -EEXIST and doesn't call l3_add_ip(). As a result, the "address exists" path in l3_add_ip() is never taken for rxip addresses, and this patch had no effect. Fixes: cb816192 ("s390/qeth: fix using of ref counter for rxip addresses") Signed-off-by:
-
Julian Wiedmann authored
Registering an IPv4 address with the HW takes quite a while, so we temporarily drop the ip_htable lock. Any concurrent add/remove of the same IP adjusts the IP's use count, and (on remove) is then blocked by addr->in_progress. After the register call has completed, we check the use count for concurrently attempted add/remove calls - and possibly straight-away deregister the IP again. This happens via l3_delete_ip(), which 1) looks up the queried IP in the htable (getting a reference to the *same* queried object), 2) deregisters the IP from the HW, and 3) frees the IP object. The caller in l3_add_ip() then does a second free on the same object. For this case, skip all the extra checks and lookups in l3_delete_ip() and just deregister & free the IP object ourselves. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
-
Julian Wiedmann authored
If the HW is not reachable, then none of the IPs in qeth's internal table has been registered with the HW yet. So when deleting such an IP, there's no need to stage it for deregistration - just drop it from the table. This fixes the "add-delete-add" scenario on an offline card, where the the second "add" merely increments the IP's use count. But as the IP is still set to DISP_ADDR_DELETE from the previous "delete" step, l3_recover_ip() won't register it with the HW when the card goes online. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
-
Julian Wiedmann authored
qeth_get_elements_for_range() doesn't know how to handle a 0-length range (ie. start == end), and returns 1 when it should return 0. Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all of the skb's linear data) are skipped when mapping the skb into regular buffer elements. This overestimation may cause several performance-related issues: 1. sub-optimal IO buffer selection, where the next buffer gets selected even though the skb would actually still fit into the current buffer. 2. forced linearization, if the element count for a non-linear skb exceeds QETH_MAX_BUFFER_ELEMENTS. Rather than modifying qeth_get_elements_for_range() and adding overhead to every caller, fix up those callers that are in risk of passing a 0-length range. Fixes: 2863c613 ("qeth: refactor calculation of SBALE count") Signed-off-by:
-
Claudiu Manoil authored
Don't include in the Rx bytecount of the packet sent up the stack: the FCB (frame control block), and the padding bytes inserted by the controller into the frame payload, nor the FCS. All these are being pulled out of the skb by gfar_process_frame(). This issue is old, likely from the driver's beginnings, however it was amplified by recent: commit d903ec77 ("gianfar: simplify FCS handling and fix memory leak") which basically added the FCS to the Rx bytecount, and so brought this to my attention. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
- 27 Feb, 2018 14 commits
-
-
Bassem Boubaker authored
The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces. The modem is controlled via AT commands through the exposed TTYs. AT^SWWAN write command can be used to activate or deactivate a WWAN connection for a PDP context defined with AT+CGDCONT. UE supports two WWAN adapter. Both WWAN adapters can be activated a the same time Signed-off-by:Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Boris Pismenny authored
The tls ulp overrides sk->prot with a new tls specific proto structs. The tls specific structs were previously based on the ipv4 specific tcp_prot sturct. As a result, attaching the tls ulp to an ipv6 tcp socket replaced some ipv6 callback with the ipv4 equivalents. This patch adds ipv6 tls proto structs and uses them when attached to ipv6 sockets. Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Sergei Shtylyov authored
We have uninlined the sh_eth_{read|write}() functions introduced in the commit 4a55530f ("net: sh_eth: modify the definitions of register"). Now remove *inline* from sh_eth_tsu_{read|write}() as well and move these functions from the header to the driver itself. This saves 684 more bytes of object code (ARM gcc 4.8.5)... Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== net: fix IFLA_MTU ignored on NEWLINK for some ip and ipv6 tunnels The fix for ip_gre follows the way other ip tunnels do: not to set mtu in ndo_init, as ip_tunnel_newlink will take care of it properly. The fix for ip6_tunnel and sit follows the way ipv6 tunenls do: to set mtu again according to IFLA_MTU after, as all bind_dev are called in ndo_init where it can't get the tb[IFLA_MTU]. ==================== Signed-off-by: -
Xin Long authored
Commit 128bb975 ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
Commit 128bb975 ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for ip6_tunnel. Note that dev->hard_header_len setting for ip6_tunnel works fine, no need to fix it. Reported-by:
-
Xin Long authored
It's safe to remove the setting of dev's needed_headroom and mtu in __gre_tunnel_init, as discussed in [1], ip_tunnel_newlink can do it properly. Now Eric noticed that it could cover the mtu value set in do_setlink when creating a ip_gre dev. It makes IFLA_MTU param not take effect. So this patch is to remove them to make IFLA_MTU work, as in other ipv4 tunnels. [1]: https://patchwork.ozlabs.org/patch/823504/ Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Reported-by:
Eric Garver <e@erig.me> Signed-off-by:
-
Andrew Lunn authored
commit f5e64032 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Fixes: f5e64032 ("net: phy: fix resume handling") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jon Maloy authored
In commit 60c25306 ("tipc: fix race between poll() and setsockopt()") we introduced a pointer from struct tipc_group to the 'group_is_connected' flag in struct tipc_sock, so that this field can be checked without dereferencing the group pointer of the latter struct. The initial value for this flag is correctly set to 'false' when a group is created, but we miss the case when no group is created at all, in which case the initial value should be 'true'. This has the effect that SOCK_RDM/DGRAM sockets sending datagrams never receive POLLOUT if they request so. This commit corrects this bug. Fixes: 60c25306 ("tipc: fix race between poll() and setsockopt()") Reported-by:
Hoang Le <hoang.h.le@dektek.com.au> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Fix resource coverity errors. Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction") Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Acked-by:
-
Sabrina Dubroca authored
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by:Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2018-02-26 Here are a two Bluetooth driver fixes for the 4.16 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
Arkadi Sharshevsky authored
The current implementation checks the combined size of the children with the 'size' of the parent. The correct behavior is to check the combined size vs the pending change and to compare vs the 'size_new'. Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by:
-
- 26 Feb, 2018 7 commits
-
-
Thomas Winter authored
This reverts commit 5c38bd1b. skb->mark contains the mark the encapsulated traffic which can result in incorrect routing decisions being made such as routing loops if the route chosen is via tunnel itself. The correct method should be to use tunnel->fwmark. Signed-off-by:
Thomas Winter <thomas.winter@alliedtelesis.co.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Ido Schimmel authored
When a VLAN is added on a port, a reference is taken on the corresponding master VLAN entry. If it does not already exist, then it is created and a reference taken. However, in the second case a reference is not really taken when CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by refcount_inc_not_zero(). Fix this by using refcount_set() on a newly created master VLAN entry. Fixes: 25127759 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Sergei Shtylyov authored
Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ramon Fried authored
Added MODULE_ALIAS("rpmsg:IPCRTR") to ensure qrtr-smd and qrtr will load when IPCRTR channel is detected. Signed-off-by:Ramon Fried <rfried@codeaurora.org> Signed-off-by:
-
Denis Du authored
Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by:
Denis Du <dudenis2000@yahoo.ca> Signed-off-by:
-
Jason Wang authored
We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by:
Christoffer Dall <christoffer.dall@linaro.org> Fixes: 761876c8 ("tap: XDP support") Signed-off-by:
-
Jason Wang authored
Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c8 ("tap: XDP support") Signed-off-by:
-
