- 11 Sep, 2009 40 commits
-
-
Heiko Carstens authored
Get rid of the PAGE_STATES config option and enable guest page hinting by default. It can be disabled by specifying "cmma=off" at the command line. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Signed-off-by:
-
Michael Holzheu authored
Using "%s" in sprintf event functions is dangerous. This patch adds a short description for this issue to the s390 debug feature documentation. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
"lockdep: Fix backtraces" reveales a bug in early setup code: when lockdep tries to save a stack backtrace before setup_arch has been called the lowcore pointer for the current thread info pointer isn't initialized yet. However our save stack backtrace code relies on it. If the pointer isn't initialized the saved backtrace will have zero entries. lockdep however relies (correctly) on the fact that that cannot happen. A write access to some random memory region is the result. Fix this by initializing the thread info pointer early. Signed-off-by:
-
Martin Schwidefsky authored
Suzuki Poulose reported the following recursive locking bug on s390: Here is the stack trace : (see Appendix I for more info) [<0000000000406ed6>] _spin_lock+0x52/0x94 [<0000000000103bde>] crst_table_free+0x14e/0x1a4 [<00000000001ba684>] __pmd_alloc+0x114/0x1ec [<00000000001be8d0>] handle_mm_fault+0x2cc/0xb80 [<0000000000407d62>] do_dat_exception+0x2b6/0x3a0 [<0000000000114f8c>] sysc_return+0x0/0x8 [<00000200001642b2>] 0x200001642b2 The page_table_lock is already acquired in __pmd_alloc (mm/memory.c) and it tries to populate the pud/pgd with a new pmd allocated. If another thread populates it before we get a chance, we free the pmd using pmd_free(). On s390x, pmd_free(even pud_free ) is #defined to crst_table_free(), which acquires the page_table_lock to protect the crst_table index updates. Hence this ends up in a recursive locking of the page_table_lock. The solution suggested by Dave Hansen is to use a new spin lock in the mmu context to protect the access to the crst_list and the pgtable_list. Reported-by:
Suzuki Poulose <suzuki@in.ibm.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
-
Hendrik Brueckner authored
Use a console_initcall() to initialize the s390 virtio console and clean up s390 console initialization in setup.c. Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Roel Kluin authored
Fix the order of goto labels in tape_generic_online. Signed-off-by:Roel Kluin <roel.kluin@gmail.com>
-
Michael Holzheu authored
For printing unsigned integers hypfs uses "%d" in snprintf(). This is wrong. With this patch "%u" is used instead. Signed-off-by:
-
Hendrik Brueckner authored
If a named saved system (NSS) cannot be defined or saved, print out an error message with the return code of the underlying z/VM CP command. Signed-off-by:
-
Felix Beck authored
If dev_set_name fails during scanning the AP bus, the reserved memory has to be freed. Signed-off-by:
Felix Beck <felix.beck@de.ibm.com> Signed-off-by:
-
Felix Beck authored
Fix lock dependency warning. inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. bash/1442 [HC0[0]:SC0[0]:HE1:SE1] takes: (&ap_dev->lock){+.?...}, at: [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] {IN-SOFTIRQ-W} state was registered at: [<000000000017f094>] __lock_acquire+0xb78/0x182c [<000000000017fe8e>] lock_acquire+0x146/0x178 [<0000000000549cf2>] _spin_lock+0x5a/0x98 [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] [<000003e001280afe>] ap_poll_all+0xaa/0x1a4 [ap] [<000000000014fa82>] tasklet_action+0xfe/0x1f4 [<0000000000150a56>] __do_softirq+0x116/0x284 [<0000000000111058>] do_softirq+0xe4/0xe8 [<00000000001504ba>] irq_exit+0xba/0xd8 [<00000000003dd04a>] do_IRQ+0x176/0x1fc [<000000000011823c>] io_return+0x0/0x8 [<0000004bfbfd2c0e>] 0x4bfbfd2c0e Signed-off-by: -
Michael Holzheu authored
Currently in the suspend process checksums for the XPRAM partitions are created and stored. During the resume process it is checked, if the checksums are still the same. If this is not the case, a kernel panic is triggered. Unfortunately this prevents XPRAM from beeing used as suspend device, because in this case after the checksum has been created, the memory image is written to XPRAM and therefore the contents of the suspend partition is changed. In order to allow XPRAM to be used as suspend device, this patch removes the checksum validation. Signed-off-by:
-
Michael Holzheu authored
The vmur class is allocated after the CCW driver is registered and it is destroyed before the CCW driver is unregistered. This is not the correct sequence, because the vmur class can be used via driver core callbacks that are triggered during the CCW driver deregistration. For Example: 1. vmur device is online 2. vmur module is unloaded This leads to the following function call stack: <4> [<0000000000387286>] device_destroy+0x36/0x5c <4> [<000003e000209714>] ur_set_offline_force+0x9c/0x10c [vmur] <4> [<000003e00020a928>] ur_remove+0x64/0xbc [vmur] <4> [<00000000003e4d2e>] ccw_device_remove+0x42/0x1ac <4> [<000000000038a1aa>] __device_release_driver+0x9a/0xe4 <4> [<000000000038a2da>] driver_detach+0xe6/0xec <4> [<0000000000388ee4>] bus_remove_driver+0xc0/0x108 <4> [<000003e00020ad5a>] ur_exit+0x52/0x84 [vmur] In device_destroy() the vmur class is used. Since it is already freed, this can lead to a kernel panic. To fix the problem, the vmur class has to be allocated before the CCW driver is registered and destroyed after the CCW driver has ben unregistered. Signed-off-by: -
Vitaliy Gusev authored
Local variable 'qname' in the function hypfs_create_file() really is not used for any purpose. Signed-off-by:
Vitaliy Gusev <vgusev@openvz.org> Cc: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hans-Joachim Picht authored
Signed-off-by:
Hans-Joachim Picht <hans@de.ibm.com> Signed-off-by:
-
Christoph Hellwig authored
No need to defined a irq_cpustat_t type if __ARCH_IRQ_STAT is defined. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Heiko Carstens authored
Eleminate the local variable machine_flags and always change machine flags directly in the lowcore. This avoids confusion about when and why the two variables have to be synchronized. Signed-off-by:
-
Nelson Elhage authored
Note that this patch moves .data.init_task inside _edata. In addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED and __initramfs_end is arbitrarily aligned; Previously it was only aligned to a 0x100-byte boundary, and always ended on an even byte. This change results in fewer output sections and in some data being reordered, but should have no functional effect. Signed-off-by:
Nelson Elhage <nelhage@ksplice.com> Signed-off-by:
Tim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Tim Abbott authored
.data.page_aligned should not need a separate output section, so as part of this cleanup I moved into the .data output section in the linker scripts in order to eliminate unnecessary references to the section name. Remove the reference to .data.idt, since nothing is put into the .data.idt section on the s390 architecture. It looks like Cyrill Gorcunov posted a patch to remove the .data.idt code on s390 previously: <http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html> CCing him and the people who acked that patch in case there's a reason it wasn't applied. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Hendrik Brueckner authored
The sysc_restore_trace_psw and io_restore_trace_psw storage locations are created in the .text section. When creating and IPLing from a named saved system (NSS), writing to these locations causes a protection exception (because the .text section is mapped as shared read-only in the NSS). To permit write access, move the storage locations into the .data section. The problem occurs only when CONFIG_TRACE_IRQFLAGS is set. The git commmit that has introduced these variables is: 411788eaSigned-off-by:
-
Hendrik Brueckner authored
If the CP SET LOADDEV on the 3215 console has been used to specify SCPdata, all data is converted to upper case letters. When scpdata contains upper case letters only, convert all letters to lower case. Signed-off-by:
-
Hendrik Brueckner authored
Append scpdata to the kernel boot command line. If scpdata starts with the equal sign (=), the kernel boot command line is replaced. (For consistency with zIPL and IPL PARM parameters.) To use scpdata for the kernel boot command line, scpdata must consist of ascii characters only. If scpdata contains other characters, scpdata is not appended to the kernel boot command line. In addition, re-IPL is extended for setting scpdata for the next Linux reboot. Signed-off-by:
-
Frank Munzert authored
With CONFIG_DEBUG_OBJECTS_TIMERS=y "chccwdev --online" for a tape device will fail with message "ODEBUG: object is on stack, but not annotated". We now use init_timer_on_stack. Signed-off-by:
Frank Munzert <munzert@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Don't use kfree directly after device registration started. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Merge the nearly empty C files and move everything from power/ to kernel/. That way the files are easier to handle. Signed-off-by:
-
Heiko Carstens authored
There is no caller of do_after_copyback() anywhere. Remove it. Signed-off-by:
-
Heiko Carstens authored
Couple of coding style fixes, replace __inline__ with inline and remove #ifdef __KERNEL_- since the header file isn't exported. Signed-off-by:
-
Heiko Carstens authored
Use compare double and swap to implement efficient atomic64 ops for 31 bit. Signed-off-by:
-
Martin Schwidefsky authored
Move the 64 bit mount code from mcount.S into mcount64.S and avoid code duplication. Signed-off-by: -
Heiko Carstens authored
In the meantime gcc generates better code than the old inline assemblies do. Original inline assembly results in: lr %r1,%r2 sr %r3,%r3 lr %r2,%r1 srdl %r2,16 alr %r2,%r3 alr %r1,%r2 srl %r1,16 xilf %r1,65535 llghr %r2,%r1 br %r14 Out of the C code gcc generates this: rll %r1,%r2,16 ar %r1,%r2 srl %r1,16 xilf %r1,65535 llghr %r2,%r1 br %r14 In addition we don't have any static register allocations anymore and gcc is free to shuffle instructions around for better pipeline usage. Signed-off-by:
-
Heiko Carstens authored
Introduce get_clock_monotonic() function which can be used to get a (fast) timestamp. Resolution is the same as for get_clock(). The only difference is that the timestamps are monotonic and don't jump backward or forward. Signed-off-by:
-
Stefan Haberland authored
This patch fixes message naming so that generic dasd messages do not contain the device discipline. For this purpose the dev_ makros are replaced by pr_ makros for generic dasd messages. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
remove unnecessary dbf call, remove string operations for magic Signed-off-by:
-
Stefan Weinhuber authored
A DASD device that is not ready or online has no defined disk layout, so all requests that arrive in such a state need to be returned as failed. Signed-off-by:
Stefan Weinhuber <wein@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
We used the init_name to set the console ccw_device's name early at the boot stage. This patch moves the name setting (for all ccw devices) to the point where we actually register the device. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by:
-
Sebastian Ott authored
We use a test_and_clear_bit to prevent a device from being unregistered twice. Unfortunately in this cases the "final" put_device (from device_initialize) was issued more than once, resulting in an use after free error. Fix this by moving this put_device to ccw_device_unregister. Signed-off-by:
-
Sebastian Ott authored
We used the init_name to set the console subchannels name early at the boot stage. With the patch cio: fix memleak in subchannel validation we moved the name setting to the point where we actually register the console subchannel. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by:
-
Sebastian Ott authored
When scanning for new subchannels we have a code path where we allocate memory for a struct subchannel, set the device name (which is dynamically allocated now) and do a check if the underlying device is blacklisted - if so we free the subchannel structure. Since we have not set up refcounting at this stage, the device name's memory is lost. Fix this by moving the dev_set_name after the blacklist test. Note: With this patch the init_name for the console subchannel becomes virtually obsolete. Signed-off-by:
-
Sebastian Ott authored
When using s390dbf with "%s" in sprintf format strings the string itself is not copied to the dbf buffer. Since in this case only pointers are stored in the s390dbf, we should not use dev_name - which is bound to the lifetime of the device. Reading this entry from s390dbf after the device was released will cause an use after free error. Signed-off-by:
-
Jan Glauber authored
The number of qdio debugfs entries was limited. Remove this limit and group the queue files in a per device directory. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
