- 29 Jul, 2022 20 commits
-
-
Jiri Pirko authored
After mlx4 driver is converted to do locked reload, devlink_region_snapshot_create() may be called from both locked and unlocked context. Note that in mlx4 region snapshots could be created on any command failure. That can happen in any flow that involves commands to FW, which means most of the driver flows. So resolve this by removing dependency on devlink->lock for region snapshots list consistency and introduce new mutex to ensure it. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jiri Pirko authored
After mlx4 driver is converted to do locked reload, functions to get/put regions snapshot ID may be called from both locked and unlocked context. So resolve this by removing dependency on devlink->lock for region snapshot ID tracking by using internal xa_lock() to maintain shapshot_ids xa_array consistency. Signed-off-by:
-
Jakub Kicinski authored
Vikas Gupta says: ==================== add framework for selftests in devlink Add support for selftests in the devlink framework. Adds a callback .selftests_check and .selftests_run in devlink_ops. User can add test(s) suite which is subsequently passed to the driver and driver can opt for running particular tests based on its capabilities. Patchset adds a flash based test for the bnxt_en driver. ==================== Link: https://lore.kernel.org/r/20220727165721.37959-1-vikas.gupta@broadcom.comSigned-off-by:
-
vikas authored
Add callbacks ============= .selftest_check: returns true for flash selftest. .selftest_run: runs a flash selftest. Also, refactor NVM APIs so that they can be used with devlink and ethtool both. Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
-
Vikas Gupta authored
Add a framework for running selftests. Framework exposes devlink commands and test suite(s) to the user to execute and query the supported tests by the driver. Below are new entries in devlink_nl_ops devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported selftests by the drivers. devlink_nl_cmd_selftests_run: To execute selftests. Users can provide a test mask for executing group tests or standalone tests. Documentation/networking/devlink/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by:
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5e use TLS TX pool to improve connection rate To offload encryption operations, the mlx5 device maintains state and keeps track of every kTLS device-offloaded connection. Two HW objects are used per TX context of a kTLS offloaded connection: a. Transport interface send (TIS) object, to reach the HW context. b. Data Encryption Key (DEK) to perform the crypto operations. These two objects are created and destroyed per TLS TX context, via FW commands. In total, 4 FW commands are issued per TLS TX context, which seriously limits the connection rate. In this series, we aim to save creation and destroy of TIS objects by recycling them. Upon recycling of a TIS, the HW still needs to be notified for the re-mapping between a TIS and a context. This is done by posting WQEs via an SQ, significantly faster API than the FW command interface. A pool is used for recycling. The pool dynamically interacts to the load and connection rate, growing and shrinking accordingly. Saving the TIS FW commands per context increases connection rate by ~42%, from 11.6K to 16.5K connections per sec. Connection rate is still limited by FW bottleneck due to the remaining per context FW commands (DEK create/destroy). This will soon be addressed in a followup series. By combining the two series, the FW bottleneck will be released, and a significantly higher (about 100K connections per sec) kTLS TX device-offloaded connection rate is reached. ==================== Link: https://lore.kernel.org/r/20220727094346.10540-1-tariqt@nvidia.comSigned-off-by:
-
Tariq Toukan authored
Let the TLS TX recycle pool be more flexible in size, by continuously and dynamically allocating and releasing HW resources in response to changes in the connections rate and load. Allocate and release pool entries in bulks (16). Use a workqueue to release/allocate in the background. Allocate a new bulk when the pool size goes lower than the low threshold (1K). Symmetric operation is done when the pool size gets greater than the upper threshold (4K). Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to ~100 bytes in host memory. Start with an empty pool to minimize memory and HW resources waste for non-TLS users that have the device-offload TLS enabled. Upon a new request, in case the pool is empty, do not wait for a whole bulk allocation to complete. Instead, trigger an instant allocation of a single resource to reduce latency. Performance tests: Before: 11,684 CPS After: 16,556 CPS Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
The transport interface send (TIS) object is responsible for performing all transport related operations of the transmit side. The ConnectX HW uses a TIS object to save and access the TLS crypto information and state of an offloaded TX kTLS connection. Before this patch, we used to create a new TIS per connection and destroy it once it’s closed. Every create and destroy of a TIS is a FW command. Same applies for the private TLS context, where we used to dynamically allocate and free it per connection. Resources recycling reduce the impact of the allocation/free operations and helps speeding up the connection rate. In this feature we maintain a pool of TX objects and use it to recycle the resources instead of re-creating them per connection. A cached TIS popped from the pool is updated to serve the new connection via the fast-path HW interface, updating the tls static and progress params. This is a very fast operation, significantly faster than FW commands. On recycling, a WQE fence is required after the context params change. This guarantees that the data is sent after the context has been successfully updated in hardware, and that the context modification doesn't interfere with existing traffic. Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the stats, according to the returned value. As the switch/case blocks are already there, this change saves unnecessary branches in the handler. Signed-off-by:
-
Tariq Toukan authored
TLS TIS objects have a defined role in mapping and reaching the HW TLS contexts. Some standard TIS attributes (like LAG port affinity) are not relevant for them. Use a dedicated TLS TIS create function instead of the generic mlx5e_create_tis. Signed-off-by:
-
Tariq Toukan authored
Multiple TLS device-offloaded contexts can be added in parallel via concurrent calls to .tls_dev_add, while calls to .tls_dev_del are sequential in tls_device_gc_task. This is not a sustainable behavior. This creates a rate gap between add and del operations (addition rate outperforms the deletion rate). When running for enough time, the TLS device resources could get exhausted, failing to offload new connections. Replace the single-threaded garbage collector work with a per-context alternative, so they can be handled on several cores in parallel. Use a new dedicated destruct workqueue for this. Tested with mlx5 device: Before: 22141 add/sec, 103 del/sec After: 11684 add/sec, 11684 del/sec Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
TLS context destructor can be run in atomic context. Cleanup operations for device-offloaded contexts could require access and interaction with the device callbacks, which might sleep. Hence, the cleanup of such contexts must be deferred and completed inside an async work. For all others, this is not necessary, as cleanup is atomic. Invoke cleanup immediately for them, avoiding queueing redundant gc work. Signed-off-by:
-
Yang Li authored
The return from the call to tls_rx_msg_size() is int, it can be a negative error code, however this is being assigned to an unsigned long variable 'sz', so making 'sz' an int. Eliminate the following coccicheck warning: ./net/tls/tls_strp.c:211:6-8: WARNING: Unsigned expression compared with zero: sz < 0 Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220728031019.32838-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tls: rx: follow ups to rx work A selection of unrelated changes. First some selftest polishing. Next a change to rcvtimeo handling for locking based on an exchange with Eric. Follow up to Paolo's comments from yesterday. Last but not least a fix to a false positive warning, turns out I've been testing with DEBUG_NET=n this whole time. ==================== Link: https://lore.kernel.org/r/20220727031524.358216-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
I went too far in the accessor conversion, we can't use tls_strp_msg() after decryption because the message may not be ready. What we care about on this path is that the output skb is detached, i.e. we didn't somehow just turn around and used the input skb with its TCP data still attached. So look at the anchor directly. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Signed-off-by:
-
Jakub Kicinski authored
Paolo points out that there seems to be no strong reason strparser users a single threaded workqueue. Perhaps there were some performance or pinning considerations? Since we don't know (and it's the slow path) let's default to the most natural, multi-threaded choice. Also rename the workqueue to "tls-". Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Eric indicates that restarting rcvtimeo on every wait may be fine. I thought that we should consider it cumulative, and made tls_rx_reader_lock() return the remaining timeo after acquiring the reader lock. tls_rx_rec_wait() gets its timeout passed in by value so it does not keep track of time previously spent. Make the lock waiting consistent with tls_rx_rec_wait() - don't keep track of time spent. Read the timeo fresh in tls_rx_rec_wait(). It's unclear to me why callers are supposed to cache the value. Link: https://lore.kernel.org/all/CANn89iKcmSfWgvZjzNGbsrndmCch2HC_EPZ7qmGboDNaWoviNQ@mail.gmail.com/Signed-off-by:
-
Jakub Kicinski authored
Add a handful of memory randomizations and precise length checks. Nothing is really broken here, I did this to increase confidence when debugging. It does fix a GCC warning, tho. Apparently GCC recognizes that memory needs to be initialized for send() but does not recognize that for write(). Signed-off-by: -
Xie Shaowen authored
delete extra space and tab in blank line, there is no functional change. Signed-off-by:
Xie Shaowen <studentxswpy@163.com> Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by:
-
- 28 Jul, 2022 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter, no known blockers for the release. Current release - regressions: - wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(), fix taking the lock before its initialized - Bluetooth: mgmt: fix double free on error path Current release - new code bugs: - eth: ice: fix tunnel checksum offload with fragmented traffic Previous releases - regressions: - tcp: md5: fix IPv4-mapped support after refactoring, don't take the pure v6 path - Revert "tcp: change pingpong threshold to 3", improving detection of interactive sessions - mld: fix netdev refcount leak in mld_{query | report}_work() due to a race - Bluetooth: - always set event mask on suspend, avoid early wake ups - L2CAP: fix use-after-free caused by l2cap_chan_put - bridge: do not send empty IFLA_AF_SPEC attribute Previous releases - always broken: - ping6: fix memleak in ipv6_renew_options() - sctp: prevent null-deref caused by over-eager error paths - virtio-net: fix the race between refill work and close, resulting in NAPI scheduled after close and a BUG() - macsec: - fix three netlink parsing bugs - avoid breaking the device state on invalid change requests - fix a memleak in another error path Misc: - dt-bindings: net: ethernet-controller: rework 'fixed-link' schema - two more batches of sysctl data race adornment" * tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) stmmac: dwmac-mediatek: fix resource leak in probe ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr net: ping6: Fix memleak in ipv6_renew_options(). net/funeth: Fix fun_xdp_tx() and XDP packet reclaim sctp: leave the err path free in sctp_stream_init to sctp_stream_free sfc: disable softirqs for ptp TX ptp: ocp: Select CRC16 in the Kconfig. tcp: md5: fix IPv4-mapped support virtio-net: fix the race between refill work and close mptcp: Do not return EINPROGRESS when subflow creation succeeds Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put Bluetooth: Always set event mask on suspend Bluetooth: mgmt: Fix double free on error path wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop() ice: do not setup vlan for loopback VSI ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS) ice: Fix VSIs unable to share unicast MAC ice: Fix tunnel checksum offload with fragmented traffic ice: Fix max VLANs available for VF netfilter: nft_queue: only allow supported familes and hooks ... -
Dan Carpenter authored
If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt() before returning. Otherwise it is a resource leak. Fixes: fa4b3ca6 ("stmmac: dwmac-mediatek: fix clock issue") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kiliSigned-off-by:
-
Ziyang Xuan authored
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister device while matching route. That may trigger null-ptr-deref bug for ip6_ptr probability as following. ========================================================= BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134 Read of size 4 at addr 0000000000000308 by task ping6/263 CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14 Call trace: dump_backtrace+0x1a8/0x230 show_stack+0x20/0x70 dump_stack_lvl+0x68/0x84 print_report+0xc4/0x120 kasan_report+0x84/0x120 __asan_load4+0x94/0xd0 find_match.part.0+0x70/0x134 __find_rr_leaf+0x408/0x470 fib6_table_lookup+0x264/0x540 ip6_pol_route+0xf4/0x260 ip6_pol_route_output+0x58/0x70 fib6_rule_lookup+0x1a8/0x330 ip6_route_output_flags_noref+0xd8/0x1a0 ip6_route_output_flags+0x58/0x160 ip6_dst_lookup_tail+0x5b4/0x85c ip6_dst_lookup_flow+0x98/0x120 rawv6_sendmsg+0x49c/0xc70 inet_sendmsg+0x68/0x94 Reproducer as following: Firstly, prepare conditions: $ip netns add ns1 $ip netns add ns2 $ip link add veth1 type veth peer name veth2 $ip link set veth1 netns ns1 $ip link set veth2 netns ns2 $ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1 $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2 $ip netns exec ns1 ifconfig veth1 up $ip netns exec ns2 ifconfig veth2 up $ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1 $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1 Secondly, execute the following two commands in two ssh windows respectively: $ip netns exec ns1 sh $while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done $ip netns exec ns1 sh $while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly, then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check. cpu0 cpu1 fib6_table_lookup __find_rr_leaf addrconf_notify [ NETDEV_CHANGEMTU ] addrconf_ifdown RCU_INIT_POINTER(dev->ip6_ptr, NULL) find_match ip6_ignore_linkdown So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to fix the null-ptr-deref bug. Fixes: dcd1f572 ("net/ipv6: Remove fib6_idev") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.comSigned-off-by:
-
Kuniyuki Iwashima authored
When we close ping6 sockets, some resources are left unfreed because pingv6_prot is missing sk->sk_prot->destroy(). As reported by syzbot [0], just three syscalls leak 96 bytes and easily cause OOM. struct ipv6_sr_hdr *hdr; char data[24] = {0}; int fd; hdr = (struct ipv6_sr_hdr *)data; hdr->hdrlen = 2; hdr->type = IPV6_SRCRT_TYPE_4; fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP); setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24); close(fd); To fix memory leaks, let's add a destroy function. Note the socket() syscall checks if the GID is within the range of net.ipv4.ping_group_range. The default value is [1, 0] so that no GID meets the condition (1 <= GID <= 0). Thus, the local DoS does not succeed until we change the default value. However, at least Ubuntu/Fedora/RHEL loosen it. $ cat /usr/lib/sysctl.d/50-default.conf ... -net.ipv4.ping_group_range = 0 2147483647 Also, there could be another path reported with these options, and some of them require CAP_NET_RAW. setsockopt IPV6_ADDRFORM (inet6_sk(sk)->pktoptions) IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu) IPV6_HOPOPTS (inet6_sk(sk)->opt) IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt) IPV6_RTHDR (inet6_sk(sk)->opt) IPV6_DSTOPTS (inet6_sk(sk)->opt) IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt) getsockopt IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list) For the record, I left a different splat with syzbot's one. unreferenced object 0xffff888006270c60 (size 96): comm "repro2", pid 231, jiffies 4294696626 (age 13.118s) hex dump (first 32 bytes): 01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554) [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715) [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024) [<000000007096a025>] __sys_setsockopt (net/socket.c:2254) [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262) [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176 Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com Reported-by:Ayushman Dutta <ayudutta@amazon.com> Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.comSigned-off-by:
-
Linus Torvalds authored
If a watch is being added to a queue, it needs to guard against interference from addition of a new watch, manual removal of a watch and removal of a watch due to some other queue being destroyed. KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by holding the key->sem writelocked and by holding refs on both the key and the queue - but that doesn't prevent interaction from other {key,queue} pairs. While add_watch_to_object() does take the spinlock on the event queue, it doesn't take the lock on the source's watch list. The assumption was that the caller would prevent that (say by taking key->sem) - but that doesn't prevent interference from the destruction of another queue. Fix this by locking the watcher list in add_watch_to_object(). Fixes: c73be61c ("pipe: Add general notification queue support") Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com Signed-off-by:David Howells <dhowells@redhat.com> cc: keyrings@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Since __post_watch_notification() walks wlist->watchers with only the RCU read lock held, we need to use RCU methods to add to the list (we already use RCU methods to remove from the list). Fix add_watch_to_object() to use hlist_add_head_rcu() instead of hlist_add_head() for that list. Fixes: c73be61c ("pipe: Add general notification queue support") Signed-off-by:
-
Krzysztof Kozlowski authored
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet controller. The Versal compatible was not released, so it can be changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated form. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/20220726070802.26579-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet controller. The Versal compatible was not released, so it can be changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated form. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220726070802.26579-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Dimitris Michailidis authored
The current implementation of fun_xdp_tx(), used for XPD_TX, is incorrect in that it takes an address/length pair and later releases it with page_frag_free(). It is OK for XDP_TX but the same code is used by ndo_xdp_xmit. In that case it loses the XDP memory type and releases the packet incorrectly for some of the types. Assorted breakage follows. Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in reclaim. Fixes: db37bc17 ("net/funeth: add the data path") Signed-off-by:
Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queuePaolo Abeni authored
Tony Nguyen says: ==================== ice: PPPoE offload support Marcin Szycik says: Add support for dissecting PPPoE and PPP-specific fields in flow dissector: PPPoE session id and PPP protocol type. Add support for those fields in tc-flower and support offloading PPPoE. Finally, add support for hardware offload of PPPoE packets in switchdev mode in ice driver. Example filter: tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \ 1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields (will be submitted soon). ICE COMMS DDP package is required to create a filter in ice. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add support for PPPoE hardware offload flow_offload: Introduce flow_match_pppoe net/sched: flower: Add PPPoE filter flow_dissector: Add PPPoE dissectors ==================== Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.comSigned-off-by: -
Jakub Kicinski authored
Similarly to a recent include/net/ cleanup, this patch adds missing includes to networking headers under include/linux. All these problems are currently masked by the existing users including the missing dependency before the broken header. Link: https://lore.kernel.org/all/20220723045755.2676857-1-kuba@kernel.org/ v1 Signed-off-by:
-
Paolo Abeni authored
This reverts commit 35d099da, reversing changes made to 58d8bcd4. I wrongly applied that to the net-next tree instead of the intended target tree (net). Reverting it on net-next. Signed-off-by:
-
Marcin Wojtas authored
Commit 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting") stopped relying on SPEED_MAX constant and hardcoded speed settings for the switch ports and rely on phylink configuration. It turned out, however, that when the relevant code is called, the mac_capabilites of CPU/DSA port remain unset. mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in dsa_tree_setup_switches(), which precedes setting the caps in phylink_get_caps down in the chain of dsa_tree_setup_ports(). As a result the mac_capabilites are 0 and the default speed for CPU/DSA port is 10M at the start. To fix that, execute mv88e6xxx_get_caps() and obtain the capabilities driectly. Fixes: 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-26 This series contains updates to ice driver only. Przemyslaw corrects accounting for VF VLANs to allow for correct number of VLANs for untrusted VF. He also correct issue with checksum offload on VXLAN tunnels. Ani allows for two VSIs to share the same MAC address. Maciej corrects checked bits for descriptor completion of loopback * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not setup vlan for loopback VSI ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS) ice: Fix VSIs unable to share unicast MAC ice: Fix tunnel checksum offload with fragmented traffic ice: Fix max VLANs available for VF ==================== Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jiri Pirko authored
The net_eq() check is already performed inside devlinks_xa_for_each_registered_get() helper, so remove the redundant appearance. Signed-off-by:
-
Krzysztof Kozlowski authored
Absolute path to other DT schema is preferred over relative one. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
-
Zhengchao Shao authored
Change the type of cbq_set_lss to void. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220726030748.243505-1-shaozhengchao@huawei.comSigned-off-by:
-
Xin Long authored
A NULL pointer dereference was reported by Wei Chen: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__list_del_entry_valid+0x26/0x80 Call Trace: <TASK> sctp_sched_dequeue_common+0x1c/0x90 sctp_sched_prio_dequeue+0x67/0x80 __sctp_outq_teardown+0x299/0x380 sctp_outq_free+0x15/0x20 sctp_association_free+0xc3/0x440 sctp_do_sm+0x1ca7/0x2210 sctp_assoc_bh_rcv+0x1f6/0x340 This happens when calling sctp_sendmsg without connecting to server first. In this case, a data chunk already queues up in send queue of client side when processing the INIT_ACK from server in sctp_process_init() where it calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in all stream_out will be freed in sctp_stream_init's err path. Then in the asoc freeing it will crash when dequeuing this data chunk as stream_out is missing. As we can't free stream out before dequeuing all data from send queue, and this patch is to fix it by moving the err path stream_out/in freeing in sctp_stream_init() to sctp_stream_free() which is eventually called when freeing the asoc in sctp_association_free(). This fix also makes the code in sctp_process_init() more clear. Note that in sctp_association_init() when it fails in sctp_stream_init(), sctp_association_free() will not be called, and in that case it should go to 'stream_free' err path to free stream instead of 'fail_init'. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by:
Wei Chen <harperchen1110@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.comSigned-off-by:
-
Alejandro Lucero authored
Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so: 1) The invoked code is always executed with softirqs disabled for non PTP packets. 2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies. 3) netdev_xmit_more used by the TX code requires preemption to be disabled. Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality. Fixes: f79c957a ("drivers: net: sfc: use netdev_xmit_more helper") Signed-off-by:Alejandro Lucero <alejandro.lucero-palau@amd.com> Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.comSigned-off-by:
-
Jonathan Lemon authored
The crc16() function is used to check the firmware validity, but the library was not explicitly selected. Fixes: 3c3673bd ("ptp: ocp: Add firmware header checks") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by:
Vadim Fedorenko <vadfed@fb.com> Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.comSigned-off-by:
-
