Signed-off-by: Jean Delvare <khali at linux-fr dot org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Here is my port of the smsc47m1 i2c hardware monitoring driver to Linux
2.6. The original driver was written by Mark D. Studebaker, and my work
is based on a preliminary port by Gabriele Gorla, who came in with an
almost finished driver, but vanished before cleaning it up. I finished
the job and improved things a bit. Credits go to Ivars Strazdins and
Cassio Freitas for testing the driver (having no hardware, I couldn't
test the code myself).


Signed-off-by: Jean Delvare <khali at linux-fr dot org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is an update to the Linux 2.6 lm83 hardware monitoring driver.

* Follow the sysfs interface naming conventions.
* Fix the "force" module parameter.
* Fix limit settings checks.
* Driver is no longer tagged experimental.

These changes are the result of me finally succeeding in getting my LM83
evaluation board to work. If there are norms and standards about how
evaluation boards can be wired, I guess I did not respect any of them,
but it works ;)


Signed-off-by: Jean Delvare <khali at linux-fr dot org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

[PATCH] w1: Added dynamic slave removal mechanism. Fixed bug when we have multiple slave with different families.

Added dynamic slave removal mechanism by introducing u32 flags; in each slave.
        If slave was found during search process then set flag.
        If after search complete we have slave entryes without magic flag then remove them.
Fixed bug when we have multiple slave with different families.
        Since attributes were static then each new family will rewrite static values with new
        function pointers... badly broken.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Added driver for Dallas' DS9490* USB <-> W1 master.
Should handle any device based on DS2490 chip.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Added w1_smem.c - driver for simple 64bit ROM devices.
Simple iButtons with ds2401/ds2411/ds1990* are handled by this driver.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Spelling fix.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Debug output cleanup. memcpy instead of direct structure copying.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Added following self-explanatory netlink events.

        W1_SLAVE_ADD = 0,
        W1_SLAVE_REMOVE,
        W1_MASTER_ADD,
        W1_MASTER_REMOVE,
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

  -#define W1_FAMILY_IBUT 0xff /* ? */
  +#define W1_FAMILY_SMEM 0x01
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

%llx -> %012llx
%x -> %02x
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

w1_check_family() checks new family before registering it.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Added w1_read_block() and w1_write_block().
w1_therm.c now uses them.
w1_therm: Chnaged snprintf to sprintf in w1_therm_read_bin() and added max_trying -
        number of tryings to read temperature before failng. By default it is 10.
        Added w1_therm_check_rom() - checks if read rom is in black list.
        If rom is in black list it is probably due to unsufficient of "power" in the sensor -
        either add strong pullup or connect it to Vcc.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Creates w1_master_attribute_* attributes and 2 routings to control them:
        w1_create_master_attributes() and w1_destroy_master_attributes().

Timeout unit was changed from jiffies to seconds.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

drivers/i2c/busses/scx200_i2c.c: In function `__check_scl':
drivers/i2c/busses/scx200_i2c.c:41: `scl' undeclared (first use in this function)
drivers/i2c/busses/scx200_i2c.c:41: (Each undeclared identifier is reported only once
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Attached is a driver for the PCA9564 "Parallel to I2C" chip, it is
similar in principle to the PCF8584 which is supported by the
i2c-algo-pcf and i2c-elektor code, however it's not code compatible in
any way: http://www.semiconductors.philips.com/pip/PCA9564PW.html

The patch contains the PCA algorithm driver and a bus driver for an ISA
card. It only supports master send and receive but I'm not sure that the
Linux i2c stack supports client side operation anyhow, and I have no
hardware to test on.

It was tested on a PC104 card containing the PCA chip and an Atmel TPM
device and also on a separate PC104 card with a DS1307 RTC hotwired onto
it for testing purposes.

The driver is against a 2.6 BK tree pulled on Friday. I also have a
fairly trivial 2.4 backport if that is of interest.

From: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is second part, which just adds the functionality to existing code
base, also including support of vid inputs for it8712 chip.

This patch was also briefly reviewed by Jean Delvare.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch forms composite module with i2c-sensor.c and new file
i2c-sensor-vid.c, which provides i2c_which_vrm function for detecting VRM
version of processor using cpuid_eax func. Resulting module has unchanged
name (i2c-sensor).

Before applaying this patch, please rename i2c-sensor.c to
i2c-sensor-detect.c

This patch was briefly reviewed by Jean Delvare.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add documentation for pci_disable_device().  We don't actually
deallocate IRQ resources in pci_disable_device() yet, but I suspect
we'll need to do so soon.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The following patch removes eeh function calls that currently break the
RPA PCI Hotplug module.  The functions in question were rejected from
mainline, and an alternate solution is being worked.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch for Linux 2.6 adds an I2C driver for the MPC107 host
bridge, plus the integrated controllers in the MPC824x, MPC85xx, and
MPC52xx PowerPCs.  The driver has been tested on a variety of systems,
by people on the linuxppc-embedded list.
Signed-off-by: Adrian Cox <adrian@humboldt.co.uk>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/i2c-2.6

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/pci-2.6

into kroah.com:/home/greg/linux/BK/pci-2.6

Mostly just removing empty pcibios_fixups[] arrays.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove pcibios_fixups[] array and move the declarations to live with
the implementations. Remove unneeded pcibios_name_device() on iSeries.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove pcibios_fixups[] from core code and declare the one fixup in
the same place it's implemented.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Good idea.  Following is ARM patch.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove the bazillion of pcibios_fixups[] arrays on MIPS and replace them
with DECLARE_PCI_FIXUP_HEADER / DECLARE_PCI_FIXUP_FINAL where the array
definition was non-empty.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>