- 24 Apr, 2008 40 commits
-
-
Richard Purdie authored
Make sure there is no confusion about the contexts brightness_set can be called under by documenting it. Signed-off-by:Richard Purdie <rpurdie@rpsys.net>
-
Rod Whitby authored
The LEDs on the Freecom FSG-3 are connected to an external memory-mapped latch on the ixp4xx expansion bus, and therefore cannot be supported by any of the existing LEDs drivers. Signed-off-by:
Rod Whitby <rod@whitby.id.au> Signed-off-by:
-
Henrique de Moraes Holschuh authored
Some led hardware allows drivers to query the led state, and this patch adds a hook to let the led class take advantage of that information when available. Without this functionality, when access to the led hardware is not exclusive (i.e. firmware or hardware might change its state behind the kernel's back), reality goes out of sync with the led class' idea of what the led is doing, which is annoying at best. Behaviour for drivers that do not or cannot read the led status is unchanged. Signed-off-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Herbert Valerio Riedel authored
Enhance leds-gpio to provide hardware-based led flashing by passing through the blink_set() call to a optionally set platform-specific function pointer. Signed-off-by:
Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by:
-
Németh Márton authored
Break the lines which were more than 80 characters into more lines; replace SPACEs with TABs; correct ident at switch-case; change character encoding from ISO-8859-2 to UTF-8. The order of the functions in led-triggers.c changed in order the similar functions can still be together under titles "Used by LED Class", "LED Trigger Interface" and "Simple LED Tigger Interface" as was grouped before when exported with EXPORT_SYMBOL. Signed-off-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Németh Márton authored
Disable any active triggers when the brightness attribute is set to zero. Signed-off-by:
-
Mrton Nmeth authored
The leds-clevo-mail module also works with model "Clevo D400P", add this model to the white list. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixesLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes: "make namespacecheck" fixes x86: fix compilation error in VisWS x86: voyager fix x86: Drop duplicate from setup.c intel-iommu.c: dma ops fix
-
Ingo Molnar authored
Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Alexey Starikovskiy authored
Signed-off-by:
Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by:
-
Ingo Molnar authored
Reported-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Alexey Starikovskiy authored
Signed-off-by:
-
Ingo Molnar authored
Stephen Rothwell noticed that: Commit 2be62149 ("x86: dma-ops on highmem fix") in Linus' tree introduced a new warning (noticed in the x86_64 allmodconfig build of linux-next): drivers/pci/intel-iommu.c:2240: warning: initialization from incompatible pointer type Which points at an instance of map_single that needs updating. Fix it to the new prototype. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix typo in previous commit [CIFS] Fix define for new proxy cap to match documentation [CIFS] Fix UNC path prefix on QueryUnixPathInfo to have correct slash [CIFS] Reserve new proxy cap for WAFS [CIFS] Add various missing flags and defintions [CIFS] make cifs_dfs_automount_list_static [CIFS] Fix oops when slow oplock process races with unmount [CIFS] Fix acl length when very short ACL being modified by chmod [CIFS] Fix looping on reconnect to Samba when unexpected tree connect fail on reconnect [CIFS] minor update to change log
-
David Howells authored
Fix a regression in the RXKAD security module introduced in: commit 91e916cf Author: Al Viro <viro@ftp.linux.org.uk> Date: Sat Mar 29 03:08:38 2008 +0000 net/rxrpc trivial annotations A variable was declared as a 16-bit type rather than a 32-bit type. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-with-apologies-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-of-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Siewior authored
This snuck in through 919ee677 ("[SPARC64]: Add NUMA support") Signed-off-by:
Sebastian Siewior <sebastian@breakpoint.cc> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits) SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request make nfs_automount_list static NFS: remove duplicate flags assignment from nfs_validate_mount_data NFS - fix potential NULL pointer dereference v2 SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use SUNRPC: Fix a race in gss_refresh_upcall() SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests SUNRPC: Remove the unused export of xprt_force_disconnect SUNRPC: remove XS_SENDMSG_RETRY SUNRPC: Protect creds against early garbage collection NFSv4: Attempt to use machine credentials in SETCLIENTID calls NFSv4: Reintroduce machine creds NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid() nfs: fix printout of multiword bitfields nfs: return negative error value from nfs{,4}_stat_to_errno NLM/lockd: Ensure client locking calls use correct credentials NFS: Remove the buggy lock-if-signalled case from do_setlk() NLM/lockd: Fix a race when cancelling a blocking lock NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-linus' of git://linux-nfs.org/~bfields/linux: (52 commits) knfsd: clear both setuid and setgid whenever a chown is done knfsd: get rid of imode variable in nfsd_setattr SUNRPC: Use unsigned loop and array index in svc_init_buffer() SUNRPC: Use unsigned index when looping over arrays SUNRPC: Update RPC server's TCP record marker decoder SUNRPC: RPC server still uses 2.4 method for disabling TCP Nagle NLM: don't let lockd exit on unexpected svc_recv errors (try #2) NFS: don't let nfs_callback_svc exit on unexpected svc_recv errors (try #2) Use a zero sized array for raw field in struct fid nfsd: use static memory for callback program and stats SUNRPC: remove svc_create_thread() nfsd: fix comment lockd: Fix stale nlmsvc_unlink_block comment NFSD: Strip __KERNEL__ testing from unexported header files. sunrpc: make token header values less confusing gss_krb5: consistently use unsigned for seqnum NFSD: Remove NFSv4 dependency on NFSv3 SUNRPC: Remove PROC_FS dependency NFSD: Use "depends on" for PROC_FS dependency nfsd: move most of fh_verify to separate function ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits) V4L/DVB (7731): tuner-xc2028: fix signal strength calculus V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800 V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2 V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure V4L/DVB (7719): pvrusb2: Implement input selection enforcement V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx V4L/DVB (7716): pvrusb2: clean up global functions V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__ V4L/DVB (7714): pvrusb2: Fix hang on module removal V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown V4L/DVB (7712): pvrusb2: Close connect/disconnect race V4L/DVB (7711): pvrusb2: Fix race on module unload V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices ...
-
Trond Myklebust authored
-
Trond Myklebust authored
RFC 2203 requires the server to drop the request if it believes the RPCSEC_GSS context is out of sequence. The problem is that we have no way on the client to know why the server dropped the request. In order to avoid spinning forever trying to resend the request, the safe approach is therefore to always invalidate the RPCSEC_GSS context on every major timeout. Signed-off-by:Trond Myklebust <Trond.Myklebust@netapp.com>
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
There are different tables for MTS firmwares. This should be taken into account while selecting the proper firmware. While at tuner-xc2028.h, improve some comments. Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to diagnose such troubles with PAL/I standard. Signed-off-by: -
Alan Cox authored
Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Steven Toth authored
cx23885: Enable cx23417 support on the HVR1800 Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Steven Toth authored
cx23885: Add generic cx23417 hardware encoder support. Signed-off-by:
-
Mike Isely authored
Change how list of possible pvrusb2 inputs is generated to include only those interfaces that make sense for the interface instance. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have Signed-off-by: -
Michael Krufky authored
These changes are required with the addition of digital television support for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the following needlessly global function static: - pvr2_hdw_set_cur_freq() - #if 0 the following unused global functions: - pvr2_hdw_get_state_name() - pvr2_hdw_get_debug_info_unlocked() - pvr2_hdw_get_debug_info_locked() Signed-off-by:
-
Mike Isely authored
Apparently the kernel developers no longer consider it proper etiquette to use __FUNCTION__; everyone must instead use __func__ (even though it breaks with older compilers). And worse still, actual effort is being expended to sweep this change throughout the kernel source tree. Don't these people have better things to do? So... Completely clean out all use of __FUNCTION__ from the pvrusb2 driver (it was just in the sysfs interface). I'm not going to use __func__ either. So there. Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver was getting had by this scenario: 1. Task A calls kthread_stop() for task B. 2. Before exiting, then Task B calls kthread_stop() for task C. The problem is, kthread_stop() wants to allocate an internal resource to itself (i.e. acquire a lock), which won't be released until kthread_stop() returns. But kthread_stop() won't return until task B is dead. But task B won't die until it finishes its call to kthread_stop() for task C, and that will block waiting on the resource already allocated inside task A. Deadlock. With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is the control thread run inside of pvrusb2-context.c, and task C is any worker thread run inside of pvrusb2-hdw.c. This problem got introduced by the previous threading setup change, which was itself an attempt to fix a module tear-down race (which it actually did fix). The lesson here is that a task being waited on as part of a kthread_stop() simply cannot be allow to also issue a kthread_stop() - or we make sure not to issue the enclosing kthread_stop() until we know that the inner kthread_stop() has completed first. The solution for the pvrusb2 driver is some hackish code which changes the main control thread tear down into a two step process. This then makes it possible to delay issuing the kthread_stop() on the control thread until after we know that everything has been torn down first. (And yes, we really need that kthread_stop() because it's the only way to safely guarantee that a module-referencing kernel thread has safely returned back out of the module before we finally remove the module.) Signed-off-by:
-
Mike Isely authored
Earlier fix to handle DVB feed thread aborts was overly-aggressive. We can take better advantage of what kthread_stop() can do. This change simplifies things. Signed-off-by:
-
Mike Isely authored
If a disconnect happens before initialization is completed, the pvrusb2 driver can accidentally touch dangling pointers. The whole initialization function must be protected by the big_lock, and once inside that lock, the initialization function should abort if it is discovered that a disconnect has already taken place. Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver - for basically forever - was not enforcing a proper module tear-down. Kernel threads are used inside the driver and all must be gone before the module can be safely removed. This changeset reimplements a chunk of pvrusb2-context.c to enforce this correctly. Unfortunately this is not a simple fix. The new implementation also cuts back on kernel thread usage; instead of there being 1 control thread per instance now it's just 1 control thread shared by all instances. (By dropping to a single thread then the module exit function can block on its shutdown and the thread itself can monitor and cleanly shut down all of the other instances first.) Signed-off-by:
-
