- 13 Mar, 2024 1 commit
-
-
Jiri Kosina authored
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar) Signed-off-by:Jiri Kosina <jkosina@suse.com>
-
- 28 Feb, 2024 1 commit
-
-
Basavaraj Natikar authored
Considering that amd_sfh exists only on AMD platforms, set the AMD SFH driver to depend on x86 to avoid build warnings or errors on other architectures, as shown below. drivers/hid/amd-sfh-hid/amd_sfh_pcie.c: In function 'amd_mp2_pci_probe': drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:413:21: error: 'boot_cpu_data' undeclared (first use in this function); did you mean 'boot_cpu_hwid'? 413 | if (boot_cpu_data.x86 >= 0x1A) | ^~~~~~~~~~~~~ | boot_cpu_hwid Fixes: 6296562f ("HID: amd_sfh: Extend MP2 register access to SFH") Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20240228145648.41c493ec@canb.auug.org.au/Signed-off-by:
Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by:
-
- 27 Feb, 2024 7 commits
-
-
Dmitry Torokhov authored
Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1) supports USI stylus. Unfortunately the HID descriptor for the stylus interface does not contain "Stylus" physical collection, which makes the kernel to try and pull battery information, resulting in errors. Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Basavaraj Natikar authored
Various MP2 register sets are supported by newer processors. Therefore, extend MP2 register access to SFH. Signed-off-by:
-
Basavaraj Natikar authored
AMD SFH load takes longer time in initialization. Hence split and defer initialization code to improve SFH module load time and boot time of the system when SFH is available. Signed-off-by:
-
Basavaraj Natikar authored
HP ProBook x360 435 G7 using older version of firmware which doesn't support disabling the interrupt for all commands. Hence avoid disabling the interrupt for that particular model. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218104 Fixes: b300667b ("HID: amd_sfh: Disable the interrupt for all command") Co-developed-by:
Akshata MukundShetty <akshata.mukundshetty@amd.com> Signed-off-by:
-
Basavaraj Natikar authored
HPD sensor data is not populating properly because of wrong order of HPD sensor structure elements. So update the order of structure elements to match the HPD sensor data received from the firmware. Fixes: 24a31ea9 ("HID: amd_sfh: Add initial support for HPD sensor") Co-developed-by:
-
Basavaraj Natikar authored
During the initialization sensors may take some time to respond. Hence, increase the sensor command timeouts in order to obtain status responses within a maximum timeout. Co-developed-by:
-
Even Xu authored
Add device ID of Arrow Lake-S into ishtp support list. Signed-off-by:
Even Xu <even.xu@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
- 15 Feb, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason Gerecke) - ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu) - race condition fix preventing Wacom driver from losing events shortly after initialization (Jason Gerecke) - fix preventing certain Logitech HID++ devices from spamming kernel log (Oleksandr Natalenko) * tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: generic: Avoid reporting a serial of '0' to userspace HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend HID: multitouch: Add required quirk for Synaptics 0xcddc device HID: wacom: Do not register input devices until after hid_hw_start HID: logitech-hidpp: Do not flood kernel log
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - Fix for broken ipv6 checksums - Fix handling of exceptions in delay slots * tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mm/memory: Use exception ip to search exception tables MIPS: Clear Cause.BD in instruction_pointer_set ptrace: Introduce exception_ip arch hook MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull landlock test fixes from Mickaël Salaün: "Fix build issues for tests, and improve test compatibility" * tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix capability for net_test selftests/landlock: Fix fs_test build with old libc selftests/landlock: Fix net_test build with old libc
-
- 14 Feb, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few regular fixes and one fix for space reservation regression since 6.7 that users have been reporting: - fix over-reservation of metadata chunks due to not keeping proper balance between global block reserve and delayed refs reserve; in practice this leaves behind empty metadata block groups, the workaround is to reclaim them by using the '-musage=1' balance filter - other space reservation fixes: - do not delete unused block group if it may be used soon - do not reserve space for checksums for NOCOW files - fix extent map assertion failure when writing out free space inode - reject encoded write if inode has nodatasum flag set - fix chunk map leak when loading block group zone info" * tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't refill whole delayed refs block reserve when starting transaction btrfs: zoned: fix chunk map leak when loading block group zone info btrfs: reject encoded write if inode has nodatasum flag set btrfs: don't reserve space for checksums when writing to nocow files btrfs: add new unused block groups to the list of unused block groups btrfs: do not delete unused block group if it may be used soon btrfs: add and use helper to check if block group is used btrfs: don't drop extent_map for free space inode on write error -
Linus Torvalds authored
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fix from Shuah Khan: "One important fix to unregister kunit_bus when KUnit module is unloaded. Not doing so causes an error when KUnit module tries to re-register the bus when it gets reloaded" * tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: device: Unregister the kunit_bus on shutdown
-
- 13 Feb, 2024 8 commits
-
-
Filipe Manana authored
Since commit 28270e25 ("btrfs: always reserve space for delayed refs when starting transaction") we started not only to reserve metadata space for the delayed refs a caller of btrfs_start_transaction() might generate but also to try to fully refill the delayed refs block reserve, because there are several case where we generate delayed refs and haven't reserved space for them, relying on the global block reserve. Relying too much on the global block reserve is not always safe, and can result in hitting -ENOSPC during transaction commits or worst, in rare cases, being unable to mount a filesystem that needs to do orphan cleanup or anything that requires modifying the filesystem during mount, and has no more unallocated space and the metadata space is nearly full. This was explained in detail in that commit's change log. However the gap between the reserved amount and the size of the delayed refs block reserve can be huge, so attempting to reserve space for such a gap can result in allocating many metadata block groups that end up not being used. After a recent patch, with the subject: "btrfs: add new unused block groups to the list of unused block groups" We started to add new block groups that are unused to the list of unused block groups, to avoid having them around for a very long time in case they are never used, because a block group is only added to the list of unused block groups when we deallocate the last extent or when mounting the filesystem and the block group has 0 bytes used. This is not a problem introduced by the commit mentioned earlier, it always existed as our metadata space reservations are, most of the time, pessimistic and end up not using all the space they reserved, so we can occasionally end up with one or two unused metadata block groups for a long period. However after that commit mentioned earlier, we are just more pessimistic in the metadata space reservations when starting a transaction and therefore the issue is more likely to happen. This however is not always enough because we might create unused metadata block groups when reserving metadata space at a high rate if there's always a gap in the delayed refs block reserve and the cleaner kthread isn't triggered often enough or is busy with other work (running delayed iputs, cleaning deleted roots, etc), not to mention the block group's allocated space is only usable for a new block group after the transaction used to remove it is committed. A user reported that he's getting a lot of allocated metadata block groups but the usage percentage of metadata space was very low compared to the total allocated space, specially after running a series of block group relocations. So for now stop trying to refill the gap in the delayed refs block reserve and reserve space only for the delayed refs we are expected to generate when starting a transaction. CC: stable@vger.kernel.org # 6.7+ Reported-by:
Ivan Shapovalov <intelfx@intelfx.name> Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/ Link: https://lore.kernel.org/linux-btrfs/CAL3q7H6802ayLHUJFztzZAVzBLJAGdFx=6FHNNy87+obZXXZpQ@mail.gmail.com/Tested-by:
Heddxh <g311571057@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAE93xANEby6RezOD=zcofENYZOT-wpYygJyauyUAZkLv6XVFOA@mail.gmail.com/Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
At btrfs_load_block_group_zone_info() we never drop a reference on the chunk map we have looked up, therefore leaking a reference on it. So add the missing btrfs_free_chunk_map() at the end of the function. Fixes: 7dc66abb ("btrfs: use a dedicated data structure for chunk maps") Reported-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Filipe Manana authored
Currently we allow an encoded write against inodes that have the NODATASUM flag set, either because they are NOCOW files or they were created while the filesystem was mounted with "-o nodatasum". This results in having compressed extents without corresponding checksums, which is a filesystem inconsistency reported by 'btrfs check'. For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers this and 'btrfs check' errors out with: [1/7] checking root items [2/7] checking extents [3/7] checking free space tree [4/7] checking fs roots root 256 inode 257 errors 1040, bad file extent, some csum missing root 256 inode 258 errors 1040, bad file extent, some csum missing ERROR: errors found in fs roots (...) So reject encoded writes if the target inode has NODATASUM set. CC: stable@vger.kernel.org # 6.1+ Reviewed-by:
-
Filipe Manana authored
Currently when doing a write to a file we always reserve metadata space for inserting data checksums. However we don't need to do it if we have a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums are disabled (-o nodatasum mount option), as in that case we are only adding unnecessary pressure to metadata reservations. For example on x86_64, with the default node size of 16K, a 4K buffered write into a nodatacow file is reserving 655360 bytes of metadata space, as it's accounting for checksums. After this change, which stops reserving space for checksums if we have a nodatacow file or checksums are disabled, we only need to reserve 393216 bytes of metadata. CC: stable@vger.kernel.org # 6.1+ Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing tooling fixes from Steven Rostedt: "RTLA: - rtla tools are exiting with a positive value when usage() is called. Make them return 0 if the usage was called via -h/--help - the -P priority sets the sched priority for rtla workload. When the SCHED_OTHER scheduler is selected, it sets the rt_priority instead of the nice parameter. Setting the nice value is the correct thing, so fix it - rtla is failing to compile with clang due to unsupported options from gcc. Adjusting the compiler/linker options makes clang work properly - Remove the sched_getattr() unused function on utils.c - Fixes for variable initialization and size, reported by clang Verification: - rv is failing to compile with clang due to unsupported options from gcc. Adjusting the compiler/linker options makes clang work properly - Fix an uninitialized variable on in_kernel.c reported by clang" * tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools/rtla: Exit with EXIT_SUCCESS when help is invoked tools/rtla: Replace setting prio with nice for SCHED_OTHER tools/rv: Fix curr_reactor uninitialized variable tools/rv: Fix Makefile compiler options for clang tools/rtla: Remove unused sched_getattr() function tools/rtla: Fix clang warning about mount_point var size tools/rtla: Fix uninitialized bucket/data->bucket_size warning tools/rtla: Fix Makefile compiler options for clang -
Tatsunosuke Tobita authored
The xf86-input-wacom driver does not treat '0' as a valid serial number and will drop any input report which contains an MSC_SERIAL = 0 event. The kernel driver already takes care to avoid sending any MSC_SERIAL event if the value of serial[0] == 0 (which is the case for devices that don't actually report a serial number), but this is not quite sufficient. Only the lower 32 bits of the serial get reported to userspace, so if this portion of the serial is zero then there can still be problems. This commit allows the driver to report either the lower 32 bits if they are non-zero or the upper 32 bits otherwise. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Fixes: f85c9dc6 ("HID: wacom: generic: Support tool ID and additional tool types") CC: stable@vger.kernel.org # v4.10 Signed-off-by:
-
Even Xu authored
After legacy suspend/resume via ACPI S3, sensor read operation fails with timeout. Also, it will cause delay in resume operation as there will be retries on failure. This is caused by commit f645a90e ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection"), which used helper functions to simplify connect, reset and disconnect process. Also avoid freeing and allocating client buffers again during reconnect process. But there is a case, when ISH firmware resets after ACPI S3 suspend, ishtp bus driver frees client buffers. Since there is no realloc again during reconnect, there are no client buffers available to send connection requests to the firmware. Without successful connection to the firmware, subsequent sensor reads will timeout. To address this issue, ishtp bus driver does not free client buffers on warm reset after S3 resume. Simply add the buffers from the read list to free list of buffers. Fixes: f645a90e ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442Signed-off-by:
-
Manuel Fombuena authored
Add support for the pointing stick (Accupoint) and 2 mouse buttons. Present on some Toshiba/dynabook Portege X30 and X40 laptops. It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817Signed-off-by:
Manuel Fombuena <fombuena@outlook.com> Signed-off-by:
-
- 12 Feb, 2024 14 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fix from Jonathan Corbet: "A single fix to the kernel_feat extension for a bug that will crash the docs build in some situations" * tag 'docs-6.8-fixes2' of git://git.lwn.net/linux: docs: kernel_feat.py: fix build error for missing files
-
Jiaxun Yang authored
On architectures with delay slot, instruction_pointer() may differ from where exception was triggered. Use exception_ip we just introduced to search exception tables to get rid of the problem. Fixes: 4bce37a6 ("mips/mm: Convert to using lock_mm_and_find_vma()") Reported-by:
Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/r/75e9fd7b08562ad9b456a5bdaacb7cc220311cc9.camel@xry111.site/Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Clear Cause.BD after we use instruction_pointer_set to override EPC. This can prevent exception_epc check against instruction code at new return address. It won't be considered as "in delay slot" after epc being overridden anyway. Signed-off-by:
-
Jiaxun Yang authored
On architectures with delay slot, architecture level instruction pointer (or program counter) in pt_regs may differ from where exception was triggered. Introduce exception_ip hook to invoke architecture code and determine actual instruction pointer to the exception. Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/Signed-off-by:
-
Guenter Roeck authored
After 'lib: checksum: Use aligned accesses for ip_fast_csum and csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test started failing for all mips platforms, both little and bit endian. Oddly enough, adding debug code into test_csum_ipv6_magic() made the problem disappear. The gcc manual says: "The "memory" clobber tells the compiler that the assembly code performs memory reads or writes to items other than those listed in the input and output operands (for example, accessing the memory pointed to by one of the input parameters) " This is definitely the case for csum_ipv6_magic(). Indeed, adding the 'memory' clobber fixes the problem. Cc: Charlie Jenkins <charlie@rivosinc.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Charlie Jenkins <charlie@rivosinc.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfsLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - Fix performance regression introduced by moving the security permission hook out of do_clone_file_range() and into its caller vfs_clone_file_range(). This causes the security hook to be called in situation were it wasn't called before as the fast permission checks were left in do_clone_file_range(). Fix this by merging the two implementations back together and restoring the old ordering: fast permission checks first, expensive ones later. - Tweak mount_setattr() permission checking so that mount properties on the real rootfs can be changed. When we added mount_setattr() we added additional checks compared to legacy mount(2). If the mount had a parent then verify that the caller and the mount namespace the mount is attached to match and if not make sure that it's an anonymous mount. But the real rootfs falls into neither category. It is neither an anoymous mount because it is obviously attached to the initial mount namespace but it also obviously doesn't have a parent mount. So that means legacy mount(2) allows changing mount properties on the real rootfs but mount_setattr(2) blocks this. This causes regressions (See the commit for details). Fix this by relaxing the check. If the mount has a parent or if it isn't a detached mount, verify that the mount namespaces of the caller and the mount are the same. Technically, we could probably write this even simpler and check that the mount namespaces match if it isn't a detached mount. But the slightly longer check makes it clearer what conditions one needs to think about. * tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: relax mount_setattr() permission checks remap_range: merge do_clone_file_range() into vfs_clone_file_range()
-
John Kacur authored
Fix rtla so that the following commands exit with 0 when help is invoked rtla osnoise top -h rtla osnoise hist -h rtla timerlat top -h rtla timerlat hist -h Link: https://lore.kernel.org/linux-trace-devel/20240203001607.69703-1-jkacur@redhat.com Cc: stable@vger.kernel.org Fixes: 1eeb6328 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by:
John Kacur <jkacur@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@kernel.org>
-
limingming3 authored
Since the sched_priority for SCHED_OTHER is always 0, it makes no sence to set it. Setting nice for SCHED_OTHER seems more meaningful. Link: https://lkml.kernel.org/r/20240207065142.1753909-1-limingming3@lixiang.com Cc: stable@vger.kernel.org Fixes: b1696371 ("rtla: Helper functions for rtla") Signed-off-by:
limingming3 <limingming3@lixiang.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -I include -c -o src/in_kernel.o src/in_kernel.c [...] src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 227 | if (!end) | ^~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false 227 | if (!end) | ^~~~~~~~~ 228 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 221 | if (!start) | ^~~~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false 221 | if (!start) | ^~~~~~~~~~~ 222 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning 215 | char *curr_reactor; | ^ | = NULL 2 warnings generated. Which is correct. Setting curr_reactor to NULL avoids the problem. Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 6d60f896 ("tools/rv: Add in-kernel monitor interface") Signed-off-by: -
Daniel Bristot de Oliveira authored
The following errors are showing up when compiling rv with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -I include -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/in_kernel.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rv] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 4bc4b131 ("rv: Add rv tool") Suggested-by:
Donald Zickus <dzickus@redhat.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
Clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function] 241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr, | ^~~~~~~~~~~~~ 1 warning generated. Which is correct, so remove the unused function. Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: b1696371 ("rtla: Helper functions for rtla") Signed-off-by: -
Daniel Bristot de Oliveira authored
clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: a957cbc0 ("rtla: Add -C cgroup support") Signed-off-by: -
Daniel Bristot de Oliveira authored
When compiling rtla with clang, I am getting the following warnings: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [..] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/osnoise_hist.o src/osnoise_hist.c src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/osnoise_hist.c:149:6: note: uninitialized use occurs here 149 | if (bucket < entries) | ^~~~~~ src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 139 | bucket = duration / data->bucket_size; src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning 132 | int bucket; | ^ | = 0 1 warning generated. [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/timerlat_hist.o src/timerlat_hist.c src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/timerlat_hist.c:204:6: note: uninitialized use occurs here 204 | if (bucket < entries) | ^~~~~~ src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 182 | bucket = latency / data->bucket_size; src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning 175 | int bucket; | ^ | = 0 1 warning generated. This is a legit warning, but data->bucket_size is always > 0 (see timerlat_hist_parse_args()), so the if is not necessary. Remove the unneeded if (data->bucket_size) to avoid the warning. Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 1eeb6328 ("rtla/timerlat: Add timerlat hist mode") Fixes: 829a6c0b ("rtla/osnoise: Add the hist mode") Signed-off-by: -
Daniel Bristot de Oliveira authored
The following errors are showing up when compiling rtla with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/osnoise.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rtla] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 1a7b22ab ("tools/rtla: Build with EXTRA_{C,LD}FLAGS") Suggested-by:
-
- 11 Feb, 2024 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Make sure a warning is issued when a hrtimer gets queued after the timers have been migrated on the CPU down path and thus said timer will get ignored * tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Report offline hrtimer enqueue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Correct the minimum CPU family for Transmeta Crusoe in Kconfig so that such hw can boot again - Do not take into accout XSTATE buffer size info supplied by userspace when constructing a sigreturn frame - Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an MCE is encountered so that it can be properly recovered from instead of simply panicking * tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6 x86/fpu: Stop relying on userspace for info to fault in xsave buffer x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
-
- 10 Feb, 2024 1 commit
-
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7 issues or aren't considered to be needed in earlier kernel versions" * tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) nilfs2: fix potential bug in end_buffer_async_write mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() MAINTAINERS: Leo Yan has moved mm/zswap: don't return LRU_SKIP if we have dropped lru lock fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super mailmap: switch email address for John Moon mm: zswap: fix objcg use-after-free in entry destruction mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range() arch/arm/mm: fix major fault accounting when retrying under per-VMA lock selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page mm: memcg: optimize parent iteration in memcg_rstat_updated() nilfs2: fix data corruption in dsync block recovery for small block sizes mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get() exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock) fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand() getrusage: use sig->stats_lock rather than lock_task_sighand() getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand() ...
-
