- 13 Mar, 2020 40 commits
-
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 5674a92c ] We forgot to set "err" on this error path. Fixes: 1a2d397a ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Sowjanya Komatineni authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1a89ac5b ] Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked mode when transfer length is not a multiple of requested bits per word. unpacked mode transfers fails when the transfer includes partial bytes in the last word. Total words to be written/read to/from FIFO is computed based on transfer length and bits per word. Unpacked mode includes 0 padding bytes for partial words to align with bits per word and these extra bytes are also accounted for calculating bytes left to transfer in the current driver. This causes extra bytes access of tx/rx buffers along with buffer index position crossing actual length where remain_len becomes negative and due to unsigned type, negative value is a 32 bit representation of signed value and transferred bytes never meets the actual transfer length resulting in transfer timeout and a hang. This patch fixes this with proper computation of the actual bytes to fill in FIFO during transmit and the actual bytes to read from FIFO during receive ignoring 0 padded bytes. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sowjanya Komatineni authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7b3d10cd ] Fixes: Clear packed bit when not using packed mode. Packed bit is not cleared when not using packed mode. This results in transfer timeouts for the unpacked mode transfers followed by the packed mode transfers. Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0e633f97 ] clang warns about a possible variable use that gcc never complained about: drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here [-Werror,-Wuninitialized] dm365_vpss_set_pg_frame_size(frame_size); ^~~~~~~~~~ drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here struct vpss_pg_frame_size frame_size; ^ 1 error generated. There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register. On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated. To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior. Fixes: 63e3ab14 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Tony Lindgren authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7f0d0786 ] Commit 747834ab ("ARM: OMAP2+: hwmod: revise hardreset behavior") made the call to _enable() conditional based on no oh->rst_lines_cnt. This caused the return value to be potentially uninitialized. Curiously we see no compiler warnings for this, probably as this gets inlined. We call _setup_reset() from _setup() and only _setup_postsetup() if the return value is zero. Currently the return value can be uninitialized for cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set. Fixes: 747834ab ("ARM: OMAP2+: hwmod: revise hardreset behavior") Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0ca7ce7d ] This resolves some bugs that affect VIA timer counter accesses. Avoid lost interrupts caused by reading the counter low byte register. Make allowance for the fact that the counter will be decremented to 0xFFFF before being reloaded. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit a5fdd713 ] A statement was originally added in 2006 to shut up a gcc warning, now but now clang warns about it: fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] pxd_t pxd = pxd; /* truncated extent of xad */ ~~~ ^~~ Modern versions of gcc are fine without the silly assignment, so just drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9. Fixes: c9e3ad60 ("JFS: Get rid of "may be used uninitialized" warnings") Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit a3d7f22e ] Checking of kmalloc() seems to have been committed - as cx23885_dvb_register() is checking for != 0 return, returning -ENOMEM should be fine here. While at it address the coccicheck suggestion to move to kmemdup rather than using kmalloc+memcpy. Fixes: 46b21bba ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit ef4bb63d ] We forgot to set "ret" on this error path. Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7afb0df5 ] We should be updating *pos. The current code is a no-op. Fixes: 1c1e45d1 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip") Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit f8e579f3 ] We had intended to update *pos, but the current code is a no-op. Fixes: 1a0adaf3 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder") Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 035a14e7 ] of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails. Fixes: b356e978 ("sh_eth: add device tree support") Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 20167609 ] The "cpu" variable comes from the sscanf() so Smatch marks it as untrusted data. We can't pass a higher value than "nr_cpu_ids" to cpu_possible() or it results in an out of bounds access. Fixes: d68d82af ("xen: implement CPU hotplugging") Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Steve Sistare authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 31b6a05f ] megaraid_sas takes 1+ seconds to load while waiting for firmware: [2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state This is due to the following loop in megasas_transition_to_ready(), which waits a minimum of 1 second, even though the FW becomes ready in tens of millisecs: /* * The cur_state should not last for more than max_wait secs */ for (i = 0; i < max_wait; i++) { ... msleep(1000); ... dev_info(&instance->pdev->dev, "FW now in Ready state\n"); This is a regression, caused by a change of the msleep granularity from 1 to 1000 due to concern about waiting too long on systems with coarse jiffies. To fix, increase iterations and use msleep(20), which results in: [2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity") Signed-off-by:
Steve Sistare <steven.sistare@oracle.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0f8ed994 ] Building nios2:allmodconfig fails as follows (each symbol is only listed once). ERROR: "__ashldi3" [drivers/md/dm-writecache.ko] undefined! ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined! ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined! ERROR: "__lshrdi3" [drivers/md/dm-zoned.ko] undefined! ERROR: "flush_icache_range" [drivers/misc/lkdtm/lkdtm.ko] undefined! ERROR: "empty_zero_page" [drivers/md/dm-mod.ko] undefined! The problem is seen with gcc 7.3.0. Export the missing symbols. Fixes: 2fc8483f ("nios2: Build infrastructure") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit c25d4788 ] The wm831x_dcdc_ilim entries needs to be uA because it is used to compare with min_uA and max_uA. While at it also make the array const and change to use unsigned int. Fixes: e4ee831f ("regulator: Add WM831x DC-DC buck convertor support") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit ca70ea43 ] MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to perform low-level platform initialization. This results in a try to install HYP stubs for the second time for each CPU and results in false HYP/SVC mode mismatch detection. The HYP stubs are already installed at the beginning of the kernel initialization on the boot CPU (head.S) or in the secondary_startup() for other CPUs. To fix this issue MCPM code should use a cpu_resume() routine without HYP stubs installation. This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid XU3/XU4/HC1 boards. Fixes: 3721924c ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Chen-Yu Tsai authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit e7e7e0d7 ] If the clock tree is not fully populated when the timer-sun5i init code is called, attempts to get the clock rate for the timer would fail and return 0. Make the init code for both clock events and clocksource check the returned clock rate and fail gracefully if the result is 0, instead of causing a divide by 0 exception later on. Fixes: 4a59058f ("clocksource/drivers/sun5i: Refactor the current code") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 40cc394b ] In the rare and unsupported case of a hostname list nfs_parse_devname will modify dev_name. There is no need to modify dev_name as the all that is being computed is the length of the hostname, so the computed length can just be shorted. Fixes: dc045898 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 8d166720 ] The apq8016 driver leaves the of-node refcount at aborting from the loop of for_each_child_of_node() in the error path. Not only the iterator node of for_each_child_of_node(), the children nodes referred from it for codec and cpu have to be properly unreferenced. Fixes: bdb052e8 ("ASoC: qcom: add apq8016 sound card support") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit b1d03fc3 ] Currently the uninitialized values in the array reply are printed out when exec is false and nvkm_pmu_send has not updated the array. Avoid confusion by only dumping out these values if they have been actually updated. Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable") Fixes: ebb58dc2 ("drm/nouveau/pmu: rename from pwr (no binary change)") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 13649101 ] Currently, the expression for calculating RON is always going to result in zero no matter the value of ram->mr[1] because the ! operator has higher precedence than the shift >> operator. I believe the missing parentheses around the expression before appying the ! operator will result in the desired result. [ Note, not tested ] Detected by CoveritScan, CID#1324005 ("Operands don't affect result") Fixes: c25bf7b6 ("drm/nouveau/bios/ramcfg: Separate out RON pull value") Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0742a338 ] 'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d56 ("USB: autosuspend for cdc-wdm") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Eric Auger authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0cfd027b ] pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms. In case memory accesses were disabled, re-enable them before the call and disable them back again just after. Fixes: 89e1f7d4 ("vfio: Add PCI device driver") Signed-off-by:
Eric Auger <eric.auger@redhat.com> Suggested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Ming Lei authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1a67356e ] It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced. So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438 ("block: setup bi_phys_segments after splitting"). Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Fixes: 76d8137a ("blk-merge: recaculate segment if it isn't less than max segments") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0e6e448b ] There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit a4b03500 ] The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 50884519 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1ecd8c9c ] The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d84 ("sh-pfc: Add emev2 pinmux support") Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 8e71fa5e ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init': drivers/video/fbdev/chipsfb.c:352:22: warning: variable 'size' set but not used [-Wunused-but-set-variable] Fixes: 8c870933 ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK"). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christophe Leroy <christophe.leroy@c-s.fr> [b.zolnierkie: minor commit summary and description fixups] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit e4228088 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#1309693 ("Unintended sign extension") Fixes: 9a9a54ad ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit fb0b3225 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension") Fixes: 2985c29c ("rtc: Add rtc support to 88PM80X PMIC") Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit dc9e4716 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension") Fixes: 008b3040 ("mfd: Add rtc support to 88pm860x") Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit f0c04c27 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#138801 ("Unintended sign extension") Fixes: edf1aaa3 ("[PATCH] RTC subsystem: DS1672 driver") Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7dd50e20 ] There is a potential NULL pointer dereference in case alloc_ctrl_packet() fails and returns NULL. Fixes: 099dc4fb ("ipwireless: driver for PC Card 3G/UMTS modem") Signed-off-by:
-
Eric Wong authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 2a4daadd ] Older versions of Libreboot and Coreboot had an invalid value (`3' in my case) in the century byte affecting the GM45 in the Thinkpad X200. Not everybody's updated their firmwares, and Linux <= 4.2 was able to read the RTC without problems, so workaround this by ignoring invalid values. Fixes: 3c217e51 ("rtc: cmos: century support") Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sylvain Chouleur <sylvain.chouleur@intel.com> Cc: Patrick McDermott <patrick.mcdermott@libiquity.com> Cc: linux-rtc@vger.kernel.org Signed-off-by:
Eric Wong <e@80x24.org> Signed-off-by:
-
Stefan Agner authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit d9866572 ] Make sure to properly put the of node in case finding the codec fails. Fixes: 81e8e492 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000") Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit f990f7fb ] Fix an unaligned memory access in tgr192_transform() by using the unaligned access helpers. Fixes: 06ace7a9 ("[CRYPTO] Use standard byte order macros wherever possible") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Pawe? Chmiel authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 19c624c6 ] This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min. Fixes: 15f4bc3b ("[media] s5p-jpeg: Add JPEG controls support") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Gal Pressman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit b1889407 ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Gal Pressman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 4959d5da ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: e3cf00d0 ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
-
