- 21 Feb, 2023 40 commits
-
-
Shunsuke Mie authored
Probably it is a simple copy error from struct vring_iov. Signed-off-by:
Shunsuke Mie <mie@igel.co.jp> Message-Id: <20230202104248.2040652-1-mie@igel.co.jp> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Alvaro Karsz authored
Add a print explaining why vhost_vdpa_alloc_domain failed if the device is not IOMMU cache coherent capable. Without this print, we have no hint why the operation failed. For example: $ virsh start <domain> error: Failed to start domain <domain> error: Unable to open '/dev/vhost-vdpa-<idx>' for vdpa device: Unknown error 524 Suggested-by:
Eugenio Perez Martin <eperezma@redhat.com> Signed-off-by:
Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20230202084212.1328530-1-alvaro.karsz@solid-run.com> Signed-off-by:
-
Zheng Wang authored
There is no check about the return value of kmalloc in virtscsi_rescan_hotunplug. Add the check to avoid use of null pointer 'inq_result' in case of the failure of kmalloc. Signed-off-by:
Zheng Wang <zyytlz.wz@163.com> Message-Id: <20230202064124.22277-1-zyytlz.wz@163.com> Signed-off-by:
-
Colin Ian King authored
There are two spelling mistakes in some literal strings. Fix them. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Message-Id: <20230130092644.37002-1-colin.i.king@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
Kangjie Xu authored
Add VIRTIO_F_RING_RESET, which indicates that the driver can reset a queue individually. VIRTIO_F_RING_RESET feature is added to virtio-spec 1.2. The relevant information is in oasis-tcs/virtio-spec#124 oasis-tcs/virtio-spec#139 The implementation only adds the feature bit in supported features. It does not require any other changes because we reuse the existing vhost protocol. The virtqueue reset process can be concluded as two parts: 1. The driver can reset a virtqueue. When it is triggered, we use the set_backend to disable the virtqueue. 2. After the virtqueue is disabled, the driver may optionally re-enable it. The process is basically similar to when the device is started, except that the restart process does not need to set features and set mem table since they do not change. QEMU will send messages containing size, base, addr, kickfd and callfd of the virtqueue in order. Specifically, the host kernel will receive these messages in order: a. VHOST_SET_VRING_NUM b. VHOST_SET_VRING_BASE c. VHOST_SET_VRING_ADDR d. VHOST_SET_VRING_KICK e. VHOST_SET_VRING_CALL f. VHOST_NET_SET_BACKEND Finally, after we use set_backend to attach the virtqueue, the virtqueue will be enabled and start to work. Signed-off-by:Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20220825085610.80315-1-kangjie.xu@linux.alibaba.com> Signed-off-by:
-
Bo Liu authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
Bo Liu <liubo03@inspur.com> Message-Id: <20230129091145.2837-1-liubo03@inspur.com> Signed-off-by:
-
Jason Wang authored
This patch implements per virtqueue dma device for mlx5_vdpa. This is needed for virtio_vdpa to work for CVQ which is backed by vringh but not DMA. We simply advertise the vDPA device itself as the DMA device for CVQ then DMA API can simply use PA so the identical mapping for CVQ can still be used. Otherwise the identical (1:1) mapping won't work when platform IOMMU is enabled since the IOVA is allocated on demand which is not necessarily the PA. This fixes the following crash when mlx5 vDPA device is bound to virtio-vdpa with platform IOMMU enabled but not in passthrough mode: BUG: unable to handle page fault for address: ff2fb3063deb1002 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1393001067 P4D 1393002067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 55 PID: 8923 Comm: kworker/u112:3 Kdump: loaded Not tainted 6.1.0+ #7 Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.5.4 12/17/2021 Workqueue: mlx5_vdpa_wq mlx5_cvq_kick_handler [mlx5_vdpa] RIP: 0010:vringh_getdesc_iotlb+0x93/0x1d0 [vringh] Code: 14 25 40 ef 01 00 83 82 c0 0a 00 00 01 48 2b 05 93 5a 1b ea 8b 4c 24 14 48 c1 f8 06 48 c1 e0 0c 48 03 05 90 5a 1b ea 48 01 c8 <0f> b7 00 83 aa c0 0a 00 00 01 65 ff 0d bc e4 41 3f 0f 84 05 01 00 RSP: 0018:ff46821ba664fdf8 EFLAGS: 00010282 RAX: ff2fb3063deb1002 RBX: 0000000000000a20 RCX: 0000000000000002 RDX: ff2fb318d2f94380 RSI: 0000000000000002 RDI: 0000000000000001 RBP: ff2fb3065e832410 R08: ff46821ba664fe00 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000d R12: ff2fb3065e832488 R13: ff2fb3065e8324a8 R14: ff2fb3065e8324c8 R15: ff2fb3065e8324a8 FS: 0000000000000000(0000) GS:ff2fb3257fac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff2fb3063deb1002 CR3: 0000001392010006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> mlx5_cvq_kick_handler+0x89/0x2b0 [mlx5_vdpa] process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x50/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Reviewed-by:
Eli Cohen <elic@nvidia.com> Tested-by:
-
Jason Wang authored
Setting DMA mask for vDPA device in case that there are virtqueue that is not backed by DMA so the vDPA device could be advertised as the DMA device that is used by DMA API for software emulated virtqueues. Reviewed-by:
-
Jason Wang authored
This patch adds the support of per vq dma device for virito-vDPA. vDPA parents then are allowed to use different DMA devices. This is useful for the parents that have software or emulated virtqueues. Reviewed-by:
-
Jason Wang authored
This patch introduces a new method to query the dma device that is use for a specific virtqueue. Reviewed-by:
-
Jason Wang authored
This patch introduces a per virtqueue dma device. This will be used for virtio devices whose virtqueue are backed by different underlayer devices. One example is the vDPA that where the control virtqueue could be implemented through software mediation. Some of the work are actually done before since the helper like vring_dma_device(). This work left are: - Let vring_dma_device() return the per virtqueue dma device instead of the vdev's parent. - Allow passing a dma_device when creating the virtqueue through a new helper, old vring creation helper will keep using vdev's parent. Reviewed-by:
-
Liming Wu authored
"enabled" is defined in vhost_init_device_iotlb, but it is never used. Let's remove it. Signed-off-by:
Liming Wu <liming.wu@jaguarmicro.com> Message-Id: <20230110024445.303-1-liming.wu@jaguarmicro.com> Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
-
Liming Wu authored
remove printk as it is meaningless. Signed-off-by:
-
Jason Wang authored
We used to (ab)use the DMA ops for setting up identical mappings in the IOTLB. This patch tries to get rid of the those unnecessary DMA ops by maintaining a simple identical/passthrough mappings by default. When bound to virtio_vdpa driver, DMA API will simply use PA as the IOVA and we will be all fine. When the vDPA bus tries to setup customized mapping (e.g when bound to vhost-vDPA), the identical/passthrough mapping will be removed. Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Jason Wang authored
This patch adds support for basic vendor stats that include counters for tx, rx and cvq. Acked-by:
-
Jason Wang authored
This patch adds a new config ops callback to allow individual simulator to implement the vendor stats callback. Acked-by:
-
Jason Wang authored
Allow individual simulator to customize the allocation size. Reviewed-by:
-
Jason Wang authored
This allows us to control the allocation size of the structure. Reviewed-by:
-
Jason Wang authored
vDPA simulators are software emulated device, so let's switch to use weak barriers to avoid extra overhead in the driver. Signed-off-by:
-
Suwan Kim authored
This patch adds completion batching to the IRQ path. It reuses batch completion code of virtblk_poll(). It collects requests to io_comp_batch and processes them all at once. It can boost up the performance by 2%. To validate the performance improvement and stabilty, I did fio test with 4 vCPU VM and 12 vCPU VM respectively. Both VMs have 8GB ram and the same number of HW queues as vCPU. The fio cammad is as follows and I ran the fio 5 times and got IOPS average. (io_uring, randread, direct=1, bs=512, iodepth=64 numjobs=2,4) Test result shows about 2% improvement. 4 vcpu VM | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without patch | 367.2K IOPS | 397.6K IOPS ----------------------------------------------------------- fio with patch | 372.8K IOPS | 407.7K IOPS 12 vcpu VM | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without patch | 363.6K IOPS | 374.8K IOPS ----------------------------------------------------------- fio with patch | 373.8K IOPS | 385.3K IOPS Signed-off-by:Suwan Kim <suwan.kim027@gmail.com> Reviewed-by:
-
Suwan Kim authored
Driver should set req->state to MQ_RQ_COMPLETE after it finishes to process req. But virtio-blk doesn't set MQ_RQ_COMPLETE after virtblk_poll() handles req and req->state still remains MQ_RQ_IN_FLIGHT. Fortunately so far there is no issue about it because blk_mq_end_request_batch() sets req->state to MQ_RQ_IDLE. In this patch, virblk_poll() calls blk_mq_complete_request_remote() to set req->state to MQ_RQ_COMPLETE before it adds req to a batch completion list. So it properly sets req->state after polling I/O is finished. Fixes: 4e040052 ("virtio-blk: support polling I/O") Signed-off-by:
-
Bagas Sanjaya authored
A sentence that checks for later spec version is meant for developers hacking the documentation source. Make it comment block (hidden from actual output). Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20221220095828.27588-4-bagasdotme@gmail.com> Signed-off-by:
-
Bagas Sanjaya authored
"It's at this stage that" means "At this point", so use the latter as it is more effective. Signed-off-by:
-
Bagas Sanjaya authored
Parenthesize targets to links in "References" section to distinguish them from remaining texts. While at it, describe the second target. Signed-off-by:
-
Sebastien Boeuf authored
Implement resume operation for vdpa_sim devices, so vhost-vdpa will offer that backend feature and userspace can effectively resume the device. Signed-off-by:
Sebastien Boeuf <sebastien.boeuf@intel.com> Message-Id: <15a4566826033c5dd9a2167e5cfb0ef4d90cea49.1672742878.git.sebastien.boeuf@intel.com> Signed-off-by:
-
Sebastien Boeuf authored
This new ioctl adds support for resuming the device from userspace. This is required when trying to restore the device in a functioning state after it's been suspended. It is already possible to reset a suspended device, but that means the device must be reconfigured and all the IOMMU/IOTLB mappings must be recreated. This new operation allows the device to be resumed without going through a full reset. This is particularly useful when trying to perform offline migration of a virtual machine (also known as snapshot/restore) as it allows the VMM to resume the virtual machine back to a running state after the snapshot is performed. Acked-by:
-
Sebastien Boeuf authored
Userspace knows if the device can be resumed or not by checking this feature bit. It's only exposed if the vdpa driver backend implements the resume() operation callback. Userspace trying to negotiate this feature when it hasn't been exposed will result in an error. Acked-by:
-
Sebastien Boeuf authored
Add a new operation to allow a vDPA device to be resumed after it has been suspended. Trying to resume a device that wasn't suspended will result in a no-op. This operation is optional. If it's not implemented, the associated backend feature bit will not be exposed. And if the feature bit is not exposed, invoking this operation will return an error. Acked-by:
-
Alvaro Karsz authored
This commit includes: 1) The driver to manage the controlplane over vDPA bus. 2) A HW monitor device to read health values from the DPU. Signed-off-by:
-
Alvaro Karsz authored
This patch fixes a FLR bug on the SNET DPU rev 1 by setting the PCI_DEV_FLAGS_NO_FLR_RESET flag. As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk to check the rev ID before calling to quirk_no_flr. Without this patch, a SNET DPU rev 1 may hang when FLR is applied. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Message-Id: <20230110165638.123745-3-alvaro.karsz@solid-run.com> Signed-off-by:
-
Alvaro Karsz authored
Add SolidRun vendor ID to pci_ids.h The vendor ID is used in 2 different source files, the SNET vDPA driver and PCI quirks. Signed-off-by:
-
Eugenio Pérez authored
VIRTIO_NET_S_LINK_UP is already returned in config reads since vdpasim creation, but the feature bit was not offered to the driver. Tested modifying VIRTIO_NET_S_LINK_UP and different values of "status" in qemu virtio-net options, using vhost_vdpa. Not considering as a fix, because there should be no driver trusting in this config read before the feature flag. Signed-off-by:
Lei Yang <leiyang@redhat.com>
-
Zhu Lingshan authored
This commit implements features provisioning for ifcvf, that means: 1)checkk whether the provisioned features are supported by the management device 2)vDPA device only presents selected feature bits Examples: a)The management device supported features: $ vdpa mgmtdev show pci/0000:01:00.5 pci/0000:01:00.5: supported_classes net max_supported_vqs 9 dev_features MTU MAC MRG_RXBUF CTRL_VQ MQ ANY_LAYOUT VERSION_1 ACCESS_PLATFORM b)Provision a vDPA device with all supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 $ vdpa/vdpa dev config show vdpa0 vdpa0: mac 00:e8:ca:11:be:05 link up link_announce false max_vq_pairs 4 mtu 1500 negotiated_features MRG_RXBUF CTRL_VQ MQ VERSION_1 ACCESS_PLATFORM c)Provision a vDPA device with a subset of the supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 device_features 0x300020020 $ vdpa dev config show vdpa0 mac 00:e8:ca:11:be:05 link up link_announce false negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20221125145724.1129962-13-lingshan.zhu@intel.com> Signed-off-by:
-
Zhu Lingshan authored
This commit retires ifcvf_private_to_vf, because the vf is already a member of the adapter, so it could be easily addressed by adapter->vf. Signed-off-by:
-
Zhu Lingshan authored
The adapter is the container of the vdpa_device, this commits allocate the adapter in dev_add() rather than in probe(). So that the vdpa_device() could be re-created when the userspace creates the vdpa device, and free-ed in dev_del() Signed-off-by:
-
Zhu Lingshan authored
This commit allocates the hw structure in the management device structure. So the hardware can be initialized once the management device is allocated in probe. Signed-off-by:
-
Zhu Lingshan authored
All ifcvf_request_irq's callees are refactored to work on ifcvf_hw, so it should be decoupled from the adapter as well Signed-off-by:
-
Zhu Lingshan authored
This commit decouples the config irq requester, the device shared irq requester and the MSI vectors allocator from the adapter. So they can be safely invoked since probe before the adapter is allocated. Signed-off-by:
-
Zhu Lingshan authored
This commit decouples the vq irq requester from the adapter, so that these functions can be invoked since probe. Signed-off-by:
-
Zhu Lingshan authored
This commit decouples config IRQ releaser from the adapter, so that it could be invoked once probe or in err handlers. ifcvf_free_irq() works on ifcvf_hw in this commit Signed-off-by:
-
