- 30 Apr, 2016 34 commits
-
-
Tomas Winkler authored
commit f862b6b2 upstream. There is a possible integer overflow following by a buffer overflow when accumulating messages coming from the FW to compose a full payload. Occurrence of wrap around has to be prevented for next message size calculation. For unsigned integer the addition overflow has occurred when the result is smaller than one of the arguments. To simplify the fix, the types of buf.size and buf_idx are set to the same width, namely size_t also to be aligned with the type of length parameter in file read/write ops. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: - Adjust context, indentation - Return error directly, rather than through cb->status and the completion list - Fix up additional format string in mei_cl_write()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 3e71da19 upstream. bytesperline should be the bytesperline for the first plane for planar formats, not that of all planes combined. This fixes a crash in xawtv caused by the wrong bpl. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389Reported-and-tested-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans Verkuil authored
commit b339a72e upstream. The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present. The adv7511 however still reported the EDID present after disconnecting the HDMI cable. Fix the logic regarding this control. And when the EDID is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver. This was also missing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Julia Lawall authored
commit 1b669e71 upstream. & is no longer allowed in column 0, since Coccinelle 1.0.4. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Arnd Bergmann authored
commit 8e580411 upstream. The davinci platform has tried to get support for the EEPROM right, but failed to get a clean build so far. At the moment, we get a warning whenever CONFIG_SYSFS is disabled, as that is needed by EEPROM_AT24: warning: (MACH_DAVINCI_EVM && MACH_SFFSDR && MACH_DAVINCI_DM6467_EVM && MACH_DAVINCI_DM365_EVM && MACH_DAVINCI_DA830_EVM && MACH_MITYOMAPL138 && MACH_MINI2440) selects EEPROM_AT24 which has unmet direct dependencies (I2C && SYSFS) Kevin Hilman initially added the 'select' to ensure that EEPROM_AT24 is always enabled in machines that really want it for normal operation (i.e. for reading the MAC address). This broke when I2C was disabled, and Russell King followed up with another patch to select that as well. I now see that the SYSFS dependency is still missing, which leaves us with three options: a) add 'select SYSFS' in addition to the others b) change AT24_EEPPROM to work without sysfs (should be possible) c) remove all those selects again and get the files to build when I2C is disabled. I would really hate to do a) because adding select statements that hardwire user-selectable symbols is generally a bad idea. I first tried b) but then ended up redoing the patch from scratch to approach c), so we can also remove the other selects. I checked that CONFIG_I2C is still enabled with davinci_all_defconfig, so that does not have to change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 45b146d7 ("ARM: Davinci: Fix I2C build errors") Fixes: 22ca4668 ("davinci: kconfig: select at24 eeprom for selected boards") Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Arnd Bergmann authored
commit e07ff943 upstream. The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 9c4c6055 ("regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Benjamin Tissoires authored
commit 4392bf33 upstream. hid_ignore_special_drivers works fine until hid_scan_report autodetects and reassign devices (for hid-multitouch, hid-microsoft and hid-rmi). Simplify the handling of the parameter: if it is there, use hid-generic, no matter what, and if not, scan the device or rely on the hid_have_special_driver table. This was detected while trying to disable hid-multitouch on a Surface Pro cover which prevented to use the keyboard. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Benjamin Tissoires authored
commit 9578f41a upstream. This allows the transport layer (I have in mind hid-logitech-dj and uhid) to set the group before it is added to the hid bus. This way, it can bypass the hid_scan_report() call, and choose in advance which driver will handle the newly created hid device. Signed-off-by: Benjamin Tisssoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Grazvydas Ignotas authored
commit 5d74325a upstream. The patch that added Logitech Dual Action gamepad support forgot to update the special driver list for the device. This caused the logitech driver not to probe unless kernel module load order was favorable. Update the special driver list to fix it. Thanks to Simon Wood for the idea. Cc: Vitaly Katraew <zawullon@gmail.com> Fixes: 56d0c8b7 ("HID: add support for Logitech Dual Action gamepads") Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Linus Walleij authored
commit 95a001f2 upstream. As of commit 876fe76d "mtd: maps: physmap: Add reference counter to set_vpp()" the comment in the header file is incorrect and misleading. Fix it up. Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Fixes: 876fe76d ("mtd: maps: physmap: Add reference counter to set_vpp()") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
commit 50e6315d upstream. Commit 985087db 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087db ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hurley authored
commit 401879c5 upstream. The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Sebastian Frias authored
commit 0b41ce99 upstream. Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8) Fixes: b32b19b8 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by: Sebastian Frias <sf84@laposte.net> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Tom Lendacky authored
commit b31dde2a upstream. Use a local variable for the exported and imported state so that alignment is not an issue. On export, set a local variable from the request context and then memcpy the contents of the local variable to the export memory area. On import, memcpy the import memory area into a local variable and then use the local variable to set the request context. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Marcin Ślusarz authored
commit 89fee59b upstream. Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Fixes: 60648033 ("perf tools: Use sscanf for parsing /proc/pid/maps") Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 210bd104 upstream. We have to unlock before returning -ENOMEM. Fixes: 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Mauro Carvalho Chehab authored
commit 8dfbcc43 upstream. If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64 [11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150 [11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40 [11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550 [11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0 [11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0 [11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0 [11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30 [11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10 [11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0 [11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0 [11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0 [11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0 [11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360 [11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300 [11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400 [11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300 [11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20 [11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70 [11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000 [11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40 [11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0 [11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad [11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0 [11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50 [11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50 [11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0 [11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130 [11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Tom Lendacky authored
commit d1662165 upstream. Since the exported information can be exposed to user-space, instead of exporting the entire request context only export the minimum information needed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Al Viro authored
commit 6b87b70c upstream. Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used to be equivalent to make allmodconfig; these days it hardwires MODULES to n. In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is treated as if it set it to n. Regression had been introduced by commit cfa98f ("kconfig: do not override symbols already set"); what happens is that conf_read_simple() does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and has conf_set_all_new_symbols() skip modules_sym. It's pretty easy to fix - simply move that call of sym_calc_value() into the callers, except for the ones in KCONFIG_ALLCONFIG handling. Objections? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: cfa98f2e ("kconfig: do not override symbols already set") Signed-off-by: Michal Marek <mmarek@suse.com> [bwh: Backported to 3.16: old code also checked for modules_sym != NULL; drop the check since it's only useful for other projects] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by: Kikim <klucznik0@op.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Tiffany Lin authored
commit 7df5ab87 upstream. In v4l2-compliance utility, test QUERYBUF required correct length value to go through each planar to check planar's length in multi-planar buffer type Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Peter Hurley authored
commit f33798de upstream. commit 9ce119f3 ("tty: Fix GPF in flush_to_ldisc()") fixed a GPF caused by a line discipline which does not define a receive_buf() method. However, the vt driver (and speakup driver also) pushes selection data directly to the line discipline receive_buf() method via tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Arnd Bergmann authored
commit ba4bc32e upstream. An older patch to convert the API in the s3c i2s driver ended up passing a const pointer into a function that takes a non-const pointer, so we now get a warning: sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe': sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] However, the s3c_i2sv2_register_component() function again passes the pointer into another function taking a const, so we just need to change its prototype. Fixes: eca3b01d ("ASoC: switch over to use snd_soc_register_component() on s3c i2s") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Markus Trippelsdorf authored
commit d85ce830 upstream. One line in perf_pmu__parse_unit() is indented wrongly, leading to a warning (=> error) from gcc 6: util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] sret = read(fd, alias->unit, UNIT_MAX_LEN); ^~~~ util/pmu.c:153:2: note: ...this 'if' clause, but it is not if (fd == -1) ^~ Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 410136f5 ("tools/perf/stat: Add event unit and scale support") Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lucas Stach authored
commit 4d107d3b upstream. imx6_pcie_link_up() previously used usleep_range() to wait for the link to come up. Since it may be called while holding the config spinlock, the sleep causes a "BUG: scheduling while atomic" error. Instead of waiting for the link to come up in imx6_pcie_link_up(), do the waiting in imx6_pcie_wait_for_link(), where we're not holding a lock and sleeping is allowed. [bhelgaas: changelog, references to bugzilla and f95d3ae7] Link: https://bugzilla.kernel.org/show_bug.cgi?id=100031 Fixes: f95d3ae7 ("PCI: imx6: Wait for retraining") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [bwh: Backported to 3.16: also update the retry loop in imx6_pcie_wait_for_link() as done upstream in commit 6cbb247e ("PCI: designware: Wait for link to come up with consistent style")] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lucas Stach authored
commit a77c5422 upstream. Remove the remnants of the workaround for erratum ERR005184 which was never completely implemented. The checks alone don't carry any value as we don't act properly on the result. A workaround should be added to the lane speed change in establish_link later. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lucas Stach authored
commit 54a47a83 upstream. This adds the PHY reset into a common error path of imx6_pcie_establish_link(), deduplicating some of the debug prints. Also reduce the severity of the "no-link" message in the one place where it is expected to be hit when no peripheral is attached. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [bwh: Backported to 3.16: - Error paths were different in imx6_pcie_start_link() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Lucas Stach authored
commit 53eeb48b upstream. Move imx6_pcie_reset_phy() near the other PHY related functions in the file. This is a cosmetic change, but also allows to do the following changes without introducing needless forward declarations. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [bwh: Prerequisite for commit 4d107d3b ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"). Backported to 3.16: apply the relevant changes from commit 1c7fae18 ("PCI: imx6: Use "u32", not "uint32_t"")] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Tom Lendacky authored
commit 952bce97 upstream. Commit 8996eafd ("crypto: ahash - ensure statesize is non-zero") added a check to prevent ahash algorithms from successfully registering if the import and export functions were not implemented. This prevents an oops in the hash_accept function of algif_hash. This commit causes the ccp-crypto module SHA support and AES CMAC support from successfully registering and causing the ccp-crypto module load to fail because the ahash import and export functions are not implemented. Update the CCP Crypto API support to provide import and export support for ahash algorithms. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 15 Apr, 2016 1 commit
-
-
Luis Henriques authored
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
- 11 Apr, 2016 5 commits
-
-
Vitaly Kuznetsov authored
commit e513229b upstream. When an SMP Hyper-V guest is running on top of 2012R2 Server and secondary cpus are sent offline (with echo 0 > /sys/devices/system/cpu/cpu$cpu/online) the system freeze is observed. This happens due to the fact that on newer hypervisors (Win8, WS2012R2, ...) vmbus channel handlers are distributed across all cpus (see init_vp_index() function in drivers/hv/channel_mgmt.c) and on cpu offlining nobody reassigns them to CPU0. Prevent cpu offlining when vmbus is loaded until the issue is fixed host-side. This patch also disables hibernation but it is OK as it is also broken (MCE error is hit on resume). Suspend still works. Tested with WS2008R2 and WS2012R2. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Chas Williams <3chas3@gmail.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1 + fix) Tested-by: Lutz Euler <lutz.euler@freenet.de> [ nicolai: Backport of upstream commit f6ff4f67, with an additional NULL pointer guard that is required for kernels 3.17 and older. To be precise, any kernel that does *not* have commit 954605ca "drm/radeon: use common fence implementation for fences, v4" requires this additional NULL pointer guard.] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Spencer E. Olson authored
commit 1fd24a47 upstream. This fixes a bug in function ni_tio_input_inttrig(). The trigger number should be compared to cmd->start_arg, not cmd->start_src. Fixes: 6a760394 ("staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use") Signed-off-by: Spencer E. Olson <olsonse@umich.edu> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andy Lutomirski authored
commit b7a58459 upstream. On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org> [ kamal: backport to 3.19-stable: no X86_FEATURE_XENPV so just call xen_pv_domain() directly ] Acked-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Ingo Molnar authored
commit 590ee7db upstream. Now that we are using smpboot_thread_init() in init/main.c as well, provide it for !CONFIG_SMP as well. This addresses a !CONFIG_SMP build failure. Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-