- 10 Dec, 2009 7 commits
-
-
Dave Airlie authored
We only want to return here for errors, the wait functions return a positive timeout otherwise, which gets back to userspace and causes X to crash here. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Also sets affected TTM calls up to not wait interruptible, since that would cause an in-kernel spin until the TTM call succeeds, since the Radeon code does not return to user-space when a signal is received. Modifies interruptible fence waits to return -ERESTARTSYS rather than -EBUSY when interrupted by a signal, since that's the (yet undocumented) semantics required by the TTM sync object hooks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal. The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer before returned to user-space. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
This convert radeon to use new TTM validation API, it doesn't really take advantage of it beside in the eviction case. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
This change allow driver to pass sorted memory placement, from most prefered placement to least prefered placement. In order to avoid long function prototype a structure is used to gather memory placement informations such as range restriction (if you need a buffer to be in given range). Range restriction is determined by fpfn & lpfn which are the first page and last page number btw which allocation can happen. If those fields are set to 0 ttm will assume buffer can be put anywhere in the address space (thus it avoids putting a burden on the driver to always properly set those fields). This patch also factor few functions like evicting first entry of lru list or getting a memory space. This avoid code duplication. V2: Change API to use placement flags and array instead of packing placement order into a quadword. V3: Make sure we set the appropriate mem.placement flag when validating or allocation memory space. [Pending Thomas Hellstrom further review but okay from preliminary review so far]. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
These are required for changes to TTM. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
The object rework moved the tiling flag setup around wrongly, so tiling we getting setup then overwritten by fb format. Fixes regression with drm-radeon-next on rv530 laptop tiling test. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 09 Dec, 2009 5 commits
-
-
Alex Deucher authored
Entries in the i2c table aren't always ordered by id. This allows us to remove some quirks that are no longer needed. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
entries in the ss table aren't always ordered by id. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
- Don't add dac load detection property to DVI-D - Make sure i2c info is valid before adding DP aux chan bus - Don't create scaling_mode_property twice - fix typo that prevented coherent and load detection from working - add coherent prop to DP (for dp->dvi adapters) Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
If we don't need the zone we need to free it. Acked-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Zhao Yakui authored
Sometimes we will use a crtc for integerated LVDS, which is different with that assigned by BIOS. If we want to get flicker-free transitions, then we could read out the current state for it and set our current state accordingly. But it is true that if we aren't reading current state out, we do need to turn everything off before modesetting. Otherwise the clocks can get very angry and we get things worse than a flicker at boot. In fact we also do the similar thing in UMS mode. We will disable all the possible outputs/crtcs for the first modesetting. So we disable all the possible outputs/crtcs before entering the KMS mode. Before we configure connector/encoder/crtc, the function of drm_helper_disable_unused_function can disable all the possible outputs/crtcs. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 08 Dec, 2009 25 commits
-
-
Dave Airlie authored
This merges the radeon KMS DisplayPort and hotplug detect support. Tested on RV635 DP card with a Dell 2408 monitor. Conflicts: drivers/gpu/drm/drm_fb_helper.c
-
Dave Airlie authored
This merges all the radeon changes that weren't reliant on core-next.
-
Dave Airlie authored
This merges the upstream Intel tree and fixes up numerous conflicts due to patches merged into Linus tree later in -rc cycle. Conflicts: drivers/char/agp/intel-agp.c drivers/gpu/drm/drm_dp_i2c_helper.c drivers/gpu/drm/i915/i915_irq.c drivers/gpu/drm/i915/i915_suspend.c
-
Dave Airlie authored
Bring all core drm changes into 2.6.32 tree and resolve the conflict that occurs. Conflicts: drivers/gpu/drm/drm_fb_helper.c
-
Ben Skeggs authored
crtc may be undefined at this point. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This enabled interrupt driven hpd support for all radeon chips. Assuming the hpd pin is wired up correctly, the driver will generate uevents on digital monitor connect and disconnect and retrain DP monitors automatically. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This just adds the functionality, it's not hooked up yet. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This just adds the functionality, it's not hooked up yet. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This just adds the functionality, it's not hooked up yet. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This populates the connectors with HPD (Hot Plug Detect) information. This will be used in subsequent patches for automatic digital monitor connect/disconnect handling. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
only return connected if there is actually a monitor connected. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This moves the radeon DP link training call to happen when we dpms on the encoder not when we set the mode. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This fix reorganises the initial DP link training slightly, and actually makes DP work under kms here. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Not returning here caused us to get a display port version of 0 for everything this caused power up to not get sent which ends up in a black screen. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This will be used laster when the encoder and transmitters are set up. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
- keep the atom i2c id in the i2c rec - fix gpio regs for GPIO and MDGPIO on pre-avivo chips - track whether the i2c line is hw capable - track whether the i2c line uses the multimedia i2c block Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
- dpcp -> dpcd - fix up dig encoder routing - aux transaction table takes delay in 10 usec units Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This is enough to retrieve EDID and DPCP. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 07 Dec, 2009 3 commits
-
-
Dave Airlie authored
None of the in-tree drivers use user objects yet so this wasn't hitting us. Stanse found unreachable code in ttm_bo_add_ttm: http://decibel.fi.muni.cz/~xslaby/stanse/error.cgi?db=32&id=714#l238Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Both radeon and nouveau can re-use this code so move it up a level so they can. However the hw interfaces for aux ch are different enough that the code to translate from mode, address, bytes to actual hw interfaces isn't generic, so move that code into the Intel driver. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Don't remap vram to 0 on IGP chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-