On Arm systems, some platform devices behind an SMMU may support the PASID
feature, which offers multiple address space. Let the firmware tell us
when a device supports PASID.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>

Since commit 518a2f19 ("dma-mapping: zero memory returned from
dma_alloc_*"), dma_alloc_* always initializes memory to zero, so there
is no need to use dma_zalloc_* or pass the __GFP_ZERO flag anymore.

The flag was introduced by commit 04fa26c7 ("iommu/arm-smmu: Convert
DMA buffer allocations to the managed API"), since the managed API
didn't provide a dmam_zalloc_coherent() function.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>

Make the SMR mask test more robust against SMR0 being live
at probe time, which might happen once we start supporting
firmware reservations for framebuffers and suchlike.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Now that we can correctly extract top-level indices without relying on
the remaining upper bits being zero, the only remaining impediments to
using a given table for TTBR1 are the address validation on map/unmap
and the awkward TCR translation granule format. Add a quirk so that we
can do the right thing at those points.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Commit 05a648cd2dd7 ("iommu/io-pgtable-arm: Rationalise TCR handling")
reworked the way in which the TCR register value is returned from the
io-pgtable code when targetting the Arm long-descriptor format, in
preparation for allowing page-tables to target TTBR1.

As it turns out, the new interface is a lot nicer to use, so do the same
conversion for the VTCR register even though there is only a single base
register for stage-2 translation.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Now that we have arm-smmu.h defining various SMMU constants, ensure that
they are namespaced with the ARM_SMMU_ prefix in order to avoid conflicts
with the CPU, such as the one we're currently bodging around with the
TCR.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Although it's conceptually nice for the io_pgtable_cfg to provide a
standard VMSA TCR value, the reality is that no VMSA-compliant IOMMU
looks exactly like an Arm CPU, and they all have various other TCR
controls which io-pgtable can't be expected to understand. Thus since
there is an expectation that drivers will have to add to the given TCR
value anyway, let's strip it down to just the essentials that are
directly relevant to io-pgtable's inner workings - namely the various
sizes and the walk attributes.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Add missing include of bitfield.h]
Signed-off-by: Will Deacon <will@kernel.org>

ARM_64_LPAE_S2_TCR_RES1 is intended to map to bit 31 of the VTCR register,
which is required to be set to 1 by the architecture. Unfortunately, we
accidentally treat this as a signed quantity which means we also set the
upper 32 bits of the VTCR to one, and they are required to be zero.

Treat ARM_64_LPAE_S2_TCR_RES1 as unsigned to avoid the unwanted
sign-extension up to 64 bits.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

By VMSA rules, using Normal Non-Cacheable type with a shareability
attribute of anything other than Outer Shareable is liable to lead into
unpredictable territory:

| Overlaying the shareability attribute (B3-1377, ARM DDI 0406C.c)
|
| A memory region with a resultant memory type attribute of Normal, and
| a resultant cacheability attribute of Inner Non-cacheable, Outer
| Non-cacheable, must have a resultant shareability attribute of Outer
| Shareable, otherwise shareability is UNPREDICTABLE

Although the SMMU architectures seem to give some slightly stronger
guarantees of Non-Cacheable output types becoming implicitly Outer
Shareable in most cases, we may as well be explicit and not take any
chances. It's also weird that LPAE attribute handling is currently split
between prot_to_pte() and init_pte() given that it can all be statically
determined up-front. Thus, collect *all* the LPAE attributes into
prot_to_pte() in order to logically pick the shareability based on the
incoming IOMMU API prot value, and tweak the short-descriptor code to
stop setting TTBR0.NOS for Non-Cacheable walks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

Commit 9e6ea59f ("iommu/io-pgtable: Support non-coherent page tables")
added support for non-coherent page-table walks to the Arm IOMMU page-table
backends. Unfortunately, it left the stage-2 allocator unchanged, so let's
hook that up in the same way.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

TTBR1 values have so far been redundant since no users implement any
support for split address spaces. Crucially, though, one of the main
reasons for wanting to do so is to be able to manage each half entirely
independently, e.g. context-switching one set of mappings without
disturbing the other. Thus it seems unlikely that tying two tables
together in a single io_pgtable_cfg would ever be particularly desirable
or useful.

Streamline the configs to just a single conceptual TTBR value
representing the allocated table. This paves the way for future users to
support split address spaces by simply allocating a table and dealing
with the detailed TTBRn logistics themselves.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Drop change to ttbr value]
Signed-off-by: Will Deacon <will@kernel.org>

For ARCH=arm builds, OF is not necessarily enabled, that is, you can
build this driver without CONFIG_OF.

When CONFIG_OF is unset, of_match_ptr() is NULL, and arm_smmu_of_match
is left orphan.

Building it with W=1 emits a warning:

drivers/iommu/arm-smmu.c:1904:34: warning: ‘arm_smmu_of_match’ defined but not used [-Wunused-const-variable=]
 static const struct of_device_id arm_smmu_of_match[] = {
                                  ^~~~~~~~~~~~~~~~~

There are two ways to fix this:

 - annotate arm_smmu_of_match with __maybe_unused (or surround the
   code with #ifdef CONFIG_OF ... #endif)

 - stop using of_match_ptr()

This commit took the latter solution.

It slightly increases the object size, but it is probably not a big deal
because arm_smmu_device_dt_probe() is also compiled irrespective of
CONFIG_OF.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>

The CONFIG option controlling this driver, ARM_SMMU_V3,
depends on ARM64, which select's OF.

So, CONFIG_OF is always defined when building this driver.
of_match_ptr(arm_smmu_of_match) is the same as arm_smmu_of_match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>

This is an off-by-one mistake.

resource_size() returns res->end - res->start + 1.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>

CMDQ_OP_TLBI_NH_VA requires VMID and this was missing since
commit 1c27df1c ("iommu/arm-smmu: Use correct address mask
for CMD_TLBI_S2_IPA"). Add it back.

Fixes: 1c27df1c ("iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>

Requiring each IOMMU driver to initialise the 'owner' field of their
'struct iommu_ops' is error-prone and easily forgotten. Follow the
example set by PCI and USB by assigning THIS_MODULE automatically when
registering the ops structure with IOMMU core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>

I no longer work for Arm, so update the stale reference to my old email
address.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

By conditionally dropping support for the legacy binding and exporting
the newly introduced 'arm_smmu_impl_init()' function we can allow the
ARM SMMU driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

When removing the SMMU driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

By removing the redundant call to 'pci_request_acs()' we can allow the
ARM SMMUv3 driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Add support for SMMU drivers built as modules to the ACPI/IORT device
probing path, by deferring the probe of the master if the SMMU driver is
known to exist but has not been loaded yet. Given that the IORT code
registers a platform device for each SMMU that it discovers, we can
easily trigger the udev based autoloading of the SMMU drivers by making
the platform device identifier part of the module alias.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # only manual smmu ko loading
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

When removing the SMMUv3 driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation,
since it will likely lead to catastrophic failure for any DMA devices
mastering through the SMMU being unbound. When the driver then attempts
to "handle" the fatal faults, it's very easy to trip over dead data
structures, leading to use-after-free.

On John's machine, he reports that the machine was "unusable" due to
loss of the storage controller following a forced unbind of the SMMUv3
driver:

  | # cd ./bus/platform/drivers/arm-smmu-v3
  | # echo arm-smmu-v3.0.auto > unbind
  | hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found!
  | platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146
  | [hwprod 0x00000146, hwcons 0x00000000]

Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs"
to true.

Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.comReported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This reverts commit addb672f.

Let's get the SMMU driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This reverts commit c07b6426.

Let's get the SMMUv3 driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

'bus_set_iommu()' allows IOMMU drivers to register their ops for a given
bus type. Unfortunately, it then doesn't allow them to be removed, which
is necessary for modular drivers to shutdown cleanly so that they can be
reloaded later on.

Allow 'bus_set_iommu()' to take a NULL 'ops' argument, which clear the
ops pointer for the selected bus_type.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Ensure that we hold a reference to the IOMMU driver module while calling
the '->of_xlate()' callback during early device probing.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

To avoid accidental removal of an active IOMMU driver module, take a
reference to the driver module in 'iommu_probe_device()' immediately
prior to invoking the '->add_device()' callback and hold it until the
after the device has been removed by '->remove_device()'.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Building drivers for ATS-aware IOMMUs as modules requires access to
pci_ats_disabled(). Export it as a GPL symbol to get things working.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Commit d355bb20 ("PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()")
unexported a bunch of symbols from the PCI core since the only external
users were non-modular IOMMU drivers. Although most of those symbols
can remain private for now, 'pci_{enable,disable_ats()' is required for
the ARM SMMUv3 driver to build as a module, otherwise we get a build
failure as follows:

  | ERROR: "pci_enable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!
  | ERROR: "pci_disable_ats" [drivers/iommu/arm-smmu-v3.ko] undefined!

Re-export these two functions so that the ARM SMMUv3 driver can be build
as a module.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[will: rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

To avoid having to export 'pci_request_acs()' to modular IOMMU drivers,
move the call into the 'of_dma_configure()' path in a similar manner to
the way in which ACS is configured when probing via ACPI/IORT.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Building IOMMU drivers as modules requires that the core IOMMU API
symbols are exported as GPL symbols.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull vfs fixes from Al Viro:
 "Eric's s_inodes softlockup fixes + Jan's fix for recent regression
  from pipe rework"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: call fsnotify_sb_delete after evict_inodes
  fs: avoid softlockups in s_inodes iterators
  pipe: Fix bogus dereference in iov_iter_alignment()

Pull xfs fixes from Darrick Wong:
 "Fix a few bugs that could lead to corrupt files, fsck complaints, and
  filesystem crashes:

   - Minor documentation fixes

   - Fix a file corruption due to read racing with an insert range
     operation.

   - Fix log reservation overflows when allocating large rt extents

   - Fix a buffer log item flags check

   - Don't allow administrators to mount with sunit= options that will
     cause later xfs_repair complaints about the root directory being
     suspicious because the fs geometry appeared inconsistent

   - Fix a non-static helper that should have been static"

* tag 'xfs-5.5-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Make the symbol 'xfs_rtalloc_log_count' static
  xfs: don't commit sunit/swidth updates to disk if that would cause repair failures
  xfs: split the sunit parameter update into two parts
  xfs: refactor agfl length computation function
  libxfs: resync with the userspace libxfs
  xfs: use bitops interface for buf log item AIL flag check
  xfs: fix log reservation overflows when allocating large rt extents
  xfs: stabilize insert range start boundary to avoid COW writeback race
  xfs: fix Sphinx documentation warning

Pull ext4 bug fixes from Ted Ts'o:
 "Ext4 bug fixes, including a regression fix"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: clarify impact of 'commit' mount option
  ext4: fix unused-but-set-variable warning in ext4_add_entry()
  jbd2: fix kernel-doc notation warning
  ext4: use RCU API in debug_print_tree
  ext4: validate the debug_want_extra_isize mount option at parse time
  ext4: reserve revoke credits in __ext4_new_inode
  ext4: unlock on error in ext4_expand_extra_isize()
  ext4: optimize __ext4_check_dir_entry()
  ext4: check for directory entries too close to block end
  ext4: fix ext4_empty_dir() for directories with holes

Pull block fixes from Jens Axboe:
 "Let's try this one again, this time without the compat_ioctl changes.
  We've got those fixed up, but that can go out next week.

  This contains:

   - block queue flush lockdep annotation (Bart)

   - Type fix for bsg_queue_rq() (Bart)

   - Three dasd fixes (Stefan, Jan)

   - nbd deadlock fix (Mike)

   - Error handling bio user map fix (Yang)

   - iocost fix (Tejun)

   - sbitmap waitqueue addition fix that affects the kyber IO scheduler
     (David)"

* tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block:
  sbitmap: only queue kyber's wait callback if not already active
  block: fix memleak when __blk_rq_map_user_iov() is failed
  s390/dasd: fix typo in copyright statement
  s390/dasd: fix memleak in path handling error case
  s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
  block: Fix a lockdep complaint triggered by request queue flushing
  block: Fix the type of 'sts' in bsg_queue_rq()
  block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
  nbd: fix shutdown and recv work deadlock v2
  iocost: over-budget forced IOs should schedule async delay

Pull KVM fixes from Paolo Bonzini:
 "PPC:
   - Fix a bug where we try to do an ultracall on a system without an
     ultravisor

  KVM:
   - Fix uninitialised sysreg accessor
   - Fix handling of demand-paged device mappings
   - Stop spamming the console on IMPDEF sysregs
   - Relax mappings of writable memslots
   - Assorted cleanups

  MIPS:
   - Now orphan, James Hogan is stepping down

  x86:
   - MAINTAINERS change, so long Radim and thanks for all the fish
   - supported CPUID fixes for AMD machines without SPEC_CTRL"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MAINTAINERS: remove Radim from KVM maintainers
  MAINTAINERS: Orphan KVM for MIPS
  kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD
  kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
  KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor
  KVM: arm/arm64: Properly handle faulting of device mappings
  KVM: arm64: Ensure 'params' is initialised when looking up sys register
  KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region
  KVM: arm64: Don't log IMP DEF sysreg traps
  KVM: arm64: Sanely ratelimit sysreg messages
  KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create()
  KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy()
  KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()

Pull RISC-V fixes from Paul Walmsley:
 "Several fixes, and one cleanup, for RISC-V.

  Fixes:

   - Fix an error in a Kconfig file that resulted in an undefined
     Kconfig option "CONFIG_CONFIG_MMU"

   - Fix undefined Kconfig option "CONFIG_CONFIG_MMU"

   - Fix scratch register clearing in M-mode (affects nommu users)

   - Fix a mismerge on my part that broke the build for
     CONFIG_SPARSEMEM_VMEMMAP users

  Cleanup:

   - Move SiFive L2 cache-related code to drivers/soc, per request"

* tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: move sifive_l2_cache.c to drivers/soc
  riscv: define vmemmap before pfn_to_page calls
  riscv: fix scratch register clearing in M-mode.
  riscv: Fix use of undefined config option CONFIG_CONFIG_MMU

Pull networking fixes from David Miller:

 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
    including adding a missing ipv6 match description.

 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
    Bhat.

 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.

 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.

 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.

 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
    Chaignon.

 7) Multicast MAC limit test is off by one in qede, from Manish Chopra.

 8) Fix established socket lookup race when socket goes from
    TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
    RCU grace period. From Eric Dumazet.

 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.

10) Fix active backup transition after link failure in bonding, from
    Mahesh Bandewar.

11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.

12) Fix wrong interface passed to ->mac_link_up(), from Russell King.

13) Fix DSA egress flooding settings in b53, from Florian Fainelli.

14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.

15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.

16) Reject invalid MTU values in stmmac, from Jose Abreu.

17) Fix refcount leak in error path of u32 classifier, from Davide
    Caratti.

18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
    Kaseorg.

19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.

20) Disable hardware GRO when XDP is attached to qede, frm Manish
    Chopra.

21) Since we encode state in the low pointer bits, dst metrics must be
    at least 4 byte aligned, which is not necessarily true on m68k. Add
    annotations to fix this, from Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
  sfc: Include XDP packet headroom in buffer step size.
  sfc: fix channel allocation with brute force
  net: dst: Force 4-byte alignment of dst_metrics
  selftests: pmtu: fix init mtu value in description
  hv_netvsc: Fix unwanted rx_table reset
  net: phy: ensure that phy IDs are correctly typed
  mod_devicetable: fix PHY module format
  qede: Disable hardware gro when xdp prog is installed
  net: ena: fix issues in setting interrupt moderation params in ethtool
  net: ena: fix default tx interrupt moderation interval
  net/smc: unregister ib devices in reboot_event
  net: stmmac: platform: Fix MDIO init for platforms without PHY
  llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
  net: hisilicon: Fix a BUG trigered by wrong bytes_compl
  net: dsa: ksz: use common define for tag len
  s390/qeth: don't return -ENOTSUPP to userspace
  s390/qeth: fix promiscuous mode after reset
  s390/qeth: handle error due to unsupported transport mode
  cxgb4: fix refcount init for TC-MQPRIO offload
  tc-testing: initial tdc selftests for cls_u32
  ...