- 01 Jul, 2019 40 commits
-
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 1bbb1c31 ] ipw->attr_memory and ipw->common_memory are assigned with the return value of ioremap. ioremap may fail, but no checks are enforced. The fix inserts the checks to avoid potential NULL pointer dereferences. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Pankaj Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 4b0a2c5f ] For regular serial ports we do not initialize value of vtermno variable. A garbage value is assigned for non console ports. The value can be observed as a random integer with [1]. [1] vim /sys/kernel/debug/virtio-ports/vport*p* This patch initialize the value of vtermno for console serial ports to '1' and regular serial ports are initiaized to '0'. Reported-by: siliu@redhat.com Signed-off-by:
Pankaj Gupta <pagupta@redhat.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 9c2ccc32 ] Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen" can copy up to 255 bytes and we only have room for two bytes. Even if this comes from the firmware and we trust it, the new policy generally is just to fix it as kernel hardenning. I can't test this code so I tried to be very conservative. I considered not allowing "evt_hdr->dlen == 1" because it doesn't initialize the whole variable but in the end I decided to allow it and manually initialized "asic_id" and "asic_ver" to zero. Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sowjanya Komatineni authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 01919493 ] Fixes: SPI driver can be built as module so perform SPI controller reset on probe to make sure it is in valid state before initiating transfer. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 76497732 ] The use of zero-sized array causes undefined behaviour when it is not the last member in a structure. As it happens to be in this case. Also, the current code makes use of a language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as this one is a flexible array member, introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last. Which is beneficial to cultivate a high-quality code. Fixes: e48f129c ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit c7052471 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./sound/soc/fsl/fsl_utils.c:74:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit b820d52e ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./sound/soc/fsl/eukrea-tlv320.c:121:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function. ./sound/soc/fsl/eukrea-tlv320.c:127:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function. Signed-off-by:
-
Nicolas Saenz Julienne authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 58e75155 ] As seen on some USB wireless keyboards manufactured by Primax, the HID parser was using some assumptions that are not always true. In this case it's s the fact that, inside the scope of a main item, an Usage Page will always precede an Usage. The spec is not pretty clear as 6.2.2.7 states "Any usage that follows is interpreted as a Usage ID and concatenated with the Usage Page". While 6.2.2.8 states "When the parser encounters a main item it concatenates the last declared Usage Page with a Usage to form a complete usage value." Being somewhat contradictory it was decided to match Window's implementation, which follows 6.2.2.8. In summary, the patch moves the Usage Page concatenation from the local item parsing function to the main item parsing function. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by:
Terry Junge <terry.junge@poly.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Chengguang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit de36e16d ] Current overlap checking cannot correctly handle a case which is baseminor < existing baseminor && baseminor + minorct > existing baseminor + minorct. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 67a0514a ] Objtool spotted that we call native_load_gs_index() with AC set. Re-arrange the code to avoid that. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 92606ec9 ] The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm64/kernel/cpu_ops.c:102:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 69, but without a corresponding object release within this function. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Stanley Chu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 3b141e8c ] For regulators used by UFS, vcc, vccq and vccq2 will have voltage range initialized by ufshcd_populate_vreg(), however other regulators may have undefined voltage range if dt-bindings have no such definition. In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg struct will be zero values and these values will be configured on regulators in different power modes. Currently this may have no harm if both "min_uV" and "max_uV" always keep "zero values" because regulator_set_voltage() will always bypass such invalid values and return "good" results. However improper values shall be fixed to avoid potential bugs. Simply bypass voltage configuration if voltage range is not defined. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Acked-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stanley Chu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 0487fff7 ] Currently if a regulator has "<name>-fixed-regulator" property in device tree, it will skip current limit initialization. This lead to a zero "max_uA" value in struct ufs_vreg. However, "regulator_set_load" operation shall be required on regulators which have valid current limits, otherwise a zero "max_uA" set by "regulator_set_load" may cause unexpected behavior when this regulator is enabled or set as high power mode. Similarly, in device's icc_level configuration flow, the target icc_level shall be updated if regulator also has valid current limit, otherwise a wrong icc_level will be calculated by zero "max_uA" and thus causes unexpected results after it is written to device. Signed-off-by:
-
Piotr Figiel authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit db3b9e2e ] It was observed that rarely during USB disconnect happening shortly after connect (before full initialization completes) usb_hub_wq would wait forever for the dev_init_lock to be unlocked. dev_init_lock would remain locked though because of infinite wait during usb_kill_urb: [ 2730.656472] kworker/0:2 D 0 260 2 0x00000000 [ 2730.660700] Workqueue: events request_firmware_work_func [ 2730.664807] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2730.670587] [<809dd164>] (schedule) from [<8069af44>] (usb_kill_urb+0xdc/0x114) [ 2730.676815] [<8069af44>] (usb_kill_urb) from [<7f258b50>] (brcmf_usb_free_q+0x34/0xa8 [brcmfmac]) [ 2730.684833] [<7f258b50>] (brcmf_usb_free_q [brcmfmac]) from [<7f2517d4>] (brcmf_detach+0xa0/0xb8 [brcmfmac]) [ 2730.693557] [<7f2517d4>] (brcmf_detach [brcmfmac]) from [<7f251a34>] (brcmf_attach+0xac/0x3d8 [brcmfmac]) [ 2730.702094] [<7f251a34>] (brcmf_attach [brcmfmac]) from [<7f2587ac>] (brcmf_usb_probe_phase2+0x468/0x4a0 [brcmfmac]) [ 2730.711601] [<7f2587ac>] (brcmf_usb_probe_phase2 [brcmfmac]) from [<7f252888>] (brcmf_fw_request_done+0x194/0x220 [brcmfmac]) [ 2730.721795] [<7f252888>] (brcmf_fw_request_done [brcmfmac]) from [<805748e4>] (request_firmware_work_func+0x4c/0x88) [ 2730.731125] [<805748e4>] (request_firmware_work_func) from [<80141474>] (process_one_work+0x228/0x808) [ 2730.739223] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2730.746105] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2730.752227] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) [ 2733.099695] kworker/0:3 D 0 1065 2 0x00000000 [ 2733.103926] Workqueue: usb_hub_wq hub_event [ 2733.106914] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2733.112693] [<809dd164>] (schedule) from [<809e2a8c>] (schedule_timeout+0x214/0x3e4) [ 2733.119621] [<809e2a8c>] (schedule_timeout) from [<809dde2c>] (wait_for_common+0xc4/0x1c0) [ 2733.126810] [<809dde2c>] (wait_for_common) from [<7f258d00>] (brcmf_usb_disconnect+0x1c/0x4c [brcmfmac]) [ 2733.135206] [<7f258d00>] (brcmf_usb_disconnect [brcmfmac]) from [<8069e0c8>] (usb_unbind_interface+0x5c/0x1e4) [ 2733.143943] [<8069e0c8>] (usb_unbind_interface) from [<8056d3e8>] (device_release_driver_internal+0x164/0x1fc) [ 2733.152769] [<8056d3e8>] (device_release_driver_internal) from [<8056c078>] (bus_remove_device+0xd0/0xfc) [ 2733.161138] [<8056c078>] (bus_remove_device) from [<8056977c>] (device_del+0x11c/0x310) [ 2733.167939] [<8056977c>] (device_del) from [<8069cba8>] (usb_disable_device+0xa0/0x1cc) [ 2733.174743] [<8069cba8>] (usb_disable_device) from [<8069507c>] (usb_disconnect+0x74/0x1dc) [ 2733.181823] [<8069507c>] (usb_disconnect) from [<80695e88>] (hub_event+0x478/0xf88) [ 2733.188278] [<80695e88>] (hub_event) from [<80141474>] (process_one_work+0x228/0x808) [ 2733.194905] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2733.201724] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2733.207913] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) It was traced down to a case where usb_kill_urb would be called on an URB structure containing more or less random data, including large number in its use_count. During the debugging it appeared that in brcmf_usb_free_q() the traversal over URBs' lists is not synchronized with operations on those lists in brcmf_usb_rx_complete() leading to handling brcmf_usbdev_info structure (holding lists' head) as lists' element and in result causing above problem. Fix it by walking through all URBs during brcmf_cancel_all_urbs using the arrays of requests instead of linked lists. Signed-off-by:
Piotr Figiel <p.figiel@camlintechnologies.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Piotr Figiel authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit a9fd0953 ] Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion which silences those warnings and improves code readability. Fix below errors when connecting the USB WiFi dongle: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2 BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434 last function: hub_event 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808) [<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ====================================================== WARNING: possible circular locking dependency detected 4.19.23-00084-g454a789-dirty #123 Not tainted ------------------------------------------------------ kworker/0:2/434 is trying to acquire lock: e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808 but task is already holding lock: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devinfo->dev_init_lock){+.+.}: mutex_lock_nested+0x1c/0x24 brcmf_usb_probe+0x78/0x550 [brcmfmac] usb_probe_interface+0xc0/0x1bc really_probe+0x228/0x2c0 __driver_attach+0xe4/0xe8 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x19c/0x214 driver_register+0x78/0x110 usb_register_driver+0x84/0x148 process_one_work+0x228/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #1 (brcmf_driver_work){+.+.}: worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #0 ((wq_completion)"events"){+.+.}: process_one_work+0x1b8/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) other info that might help us debug this: Chain exists of: (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devinfo->dev_init_lock); lock(brcmf_driver_work); lock(&devinfo->dev_init_lock); lock((wq_completion)"events"); *** DEADLOCK *** 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] stack backtrace: CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events request_firmware_work_func [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330) [<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30) [<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268) [<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808) [<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit d825db34 ] Clang warns about what is clearly a case of passing an uninitalized variable into a static function: drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here [-Werror,-Wuninitialized] lpphy_papd_cal(dev, gains, 0, 1, 30); ^~~~~ drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here struct lpphy_tx_gains gains, oldgains; ^ 1 error generated. However, this function is empty, and its arguments are never evaluated, so gcc in contrast does not warn here. Both compilers behave in a reasonable way as far as I can tell, so we should change the code to avoid the warning everywhere. We could just eliminate the lpphy_papd_cal() function entirely, given that it has had the TODO comment in it for 10 years now and is rather unlikely to ever get done. I'm doing a simpler change here, and just pass the 'oldgains' variable in that has been initialized, based on the guess that this is what was originally meant. Fixes: 2c0d6100 ("b43: LP-PHY: Begin implementing calibration & software RFKILL support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 46953f97 ] In case kmemdup fails, the fix sets conn_info->req_ie_len and conn_info->resp_ie_len to zero to avoid buffer overflows. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 76597628 ] In case alloc_workqueue fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 6f9ca1d3 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 536cc27d ] devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by:
-
Lars-Peter Clausen authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit df1d80ae ] For devices from the SigmaDelta family we need to keep CS low when doing a conversion, since the device will use the MISO line as a interrupt to indicate that the conversion is complete. This is why the driver locks the SPI bus and when the SPI bus is locked keeps as long as a conversion is going on. The current implementation gets one small detail wrong though. CS is only de-asserted after the SPI bus is unlocked. This means it is possible for a different SPI device on the same bus to send a message which would be wrongfully be addressed to the SigmaDelta device as well. Make sure that the last SPI transfer that is done while holding the SPI bus lock de-asserts the CS signal. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <Alexandru.Ardelean@analog.com> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 7c21383f ] The LLVM linker (ld.lld) defaults to removing local relocations, which causes KASLR boot failures. ld.bfd and ld.gold already handle this correctly. This adds the explicit instruction "--discard-none" during the link phase. There is no change in output for ld.bfd and ld.gold, but ld.lld now produces an image with all the needed relocations. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: clang-built-linux@googlegroups.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190404214027.GA7324@beast Link: https://github.com/ClangBuiltLinux/linux/issues/404Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 8d10dc28 ] The call to of_find_node_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit a9acc26b ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. ./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 23329803 ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit e91012ee ] clang points out that the declaration of cio_irb does not match the definition exactly, it is missing the alignment attribute: ../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ ^ ../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ ../drivers/s390/cio/cio.h:118:1: note: previous attribute is here DECLARE_PER_CPU(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ Use DECLARE_PER_CPU_ALIGNED() here, to make the two match. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 00053de5 ] Microphone detection provides the button detection features on the Arizona CODECs as such it will be running if the jack is currently inserted. If the driver is unbound whilst the jack is still inserted this will cause warnings from the regulator framework as the MICVDD regulator is put but was never disabled. Correct this by disabling microphone detection on driver removal and if the microphone detection was running disable the regulator and put the runtime reference that was currently held. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Ulf Hansson authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit dc351d4c ] The dev->power.direct_complete flag may become set in device_prepare() in case the device don't have any PM callbacks (dev->power.no_pm_callbacks is set). This leads to a broken behaviour, when there is child having wakeup enabled and relies on its parent to be used in the wakeup path. More precisely, when the direct complete path becomes selected for the child in __device_suspend(), the propagation of the dev->power.wakeup_path becomes skipped as well. Let's address this problem, by checking if the device is a part the wakeup path or has wakeup enabled, then prevent the direct complete path from being used. Reported-by:
Loic Pallardy <loic.pallardy@st.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Comment cleanup ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yinbo Zhu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 05cb6b2a ] eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock), and 0xC(2^25 SD clock). The data timeout counter can count from 2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout counter counts for only 2^13 SD clocks. A-008358: The data timeout counter value loaded into the timeout counter is less than expected and can result into early timeout error in case of eSDHC data transactions. The table below shows the expected vs actual timeout period for different values of SYSCTL[DTOCV]: these two erratum has the same quirk to control it, and set SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue. Signed-off-by:
Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Yinbo Zhu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit a46e4271 ] Software writing to the Transfer Type configuration register (system clock domain) can cause a setup/hold violation in the CRC flops (card clock domain), which can cause write accesses to be sent with corrupt CRC values. This issue occurs only for write preceded by read. this erratum is to fix this issue. Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 61102598 ] In case spi_sync_locked fails, the fix reports the error and returns the error code upstream. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
John Garry authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit d8649fc1 ] When we discover the PHY is empty in sas_rediscover_dev(), the PHY information (like negotiated linkrate) is not updated. As such, for a user examining sysfs for that PHY, they would see incorrect values: root@(none)$ cd /sys/class/sas_phy/phy-0:0:20 root@(none)$ more negotiated_linkrate 3.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 3.0 Gbit So fix this, simply discover the PHY again, even though we know it's empty; in the above example, this gives us: root@(none)$ more negotiated_linkrate Phy disabled We must do this after unregistering the device associated with the PHY (in sas_unregister_devs_sas_addr()). Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 73e6ff71 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Unable to handle kernel paging request at virtual address ffffffbffee0002e pgd = ffffffc1d68d4000 [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 94000046 [#1] PREEMPT SMP Modules linked in: f71805f(+) hwmon CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88 Hardware name: linux,dummy-virt (DT) task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000 PC is at f71805f_find+0x6c/0x358 [f71805f] Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: e53004e2 ("hwmon: New f71805f driver") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 755a9b0f ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: ba224e2c ("hwmon: New PC87427 hardware monitoring driver") Reported-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 8c082675 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit d6410408 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 14b97ba5 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81 ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit a6d2a5a9 ] Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Nicholas Nunley authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit bfb0ebed ] Modifying the VLAN stripping options when a port VLAN is configured will break traffic for the VSI, and conceptually doesn't make sense, so don't allow this. Signed-off-by:
Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1832661 [ Upstream commit 7dbcf2b0 ] Commit 37fe6a42 ("x86: Check stack overflow in detail") added a broad check for the full exception stack area, i.e. it considers the full exception stack area as valid. That's wrong in two aspects: 1) It does not check the individual areas one by one 2) #DF, NMI and #MCE are not enabling interrupts which means that a regular device interrupt cannot happen in their context. In fact if a device interrupt hits one of those IST stacks that's a bug because some code path enabled interrupts while handling the exception. Limit the check to the #DB stack and consider all other IST stacks as 'overflow' or invalid. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
