- 02 Jul, 2024 4 commits
-
-
Abhishek Dubey authored
For printing dump_trace, just use existing stats_print() function. Signed-off-by:
Abhishek Dubey <adubey@linux.ibm.com> Link: https://lore.kernel.org/r/20240628183224.452055-1-adubey@linux.ibm.comSigned-off-by:
Namhyung Kim <namhyung@kernel.org>
-
Adrian Hunter authored
In the past, the exclude_guest setting has had no effect on Intel PT tracing, but that may not be the case in the future. Set the flag correctly based upon whether KVM is using Intel PT "Host/Guest" mode, which is determined by the kvm_intel module parameter pt_mode: pt_mode=0 System-wide mode : host and guest output to host buffer pt_mode=1 Host/Guest mode : host/guest output to host/guest buffers respectively Fixes: 6e86bfdc ("perf intel-pt: Support decoding of guest kernel") Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
aux_watermark is a u32. For a 64-bit size, cap the aux_watermark calculation at UINT_MAX instead of truncating it to 32-bits. Fixes: 874fc35c ("perf intel-pt: Use aux_watermark") Signed-off-by:
-
Namhyung Kim authored
Merge fixes and updates in v6.10 into perf-tools-next to resolve changes in synthesizing the LOST_SAMPLES records and build fixes. Signed-off-by:
-
- 28 Jun, 2024 7 commits
-
-
Madadi Vineeth Reddy authored
Currently, the -r/--repeat option accepts values from 0 and complains for -1. The help section specifies: -r, --repeat <n> repeat the workload replay N times (-1: infinite) The -r -1 option raises an error because replay_repeat is defined as an unsigned int. In the current implementation, the workload is repeated n times when -r <n> is used, except when n is 0. When -r is set to 0, the workload is also repeated once. This happens because when -r=0, the run_one_test function is not called. (Note that mutex unlocking, which is essential for child threads spawned to emulate the workload, happens in run_one_test.) However, mutex unlocking is still performed in the destroy_tasks function. Thus, -r=0 results in the workload running once coincidentally. To clarify and maintain the existing logic for -r >= 1 (which runs the workload the specified number of times) and to fix the issue with infinite runs, make -r=0 perform an infinite run. Reviewed-by:
James Clark <james.clark@arm.com> Signed-off-by:
Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20240628071821.15264-1-vineethr@linux.ibm.comSigned-off-by:
-
Yang Li authored
./tools/perf/util/pmu.c:1776:49-50: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9443Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20240628053049.44521-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Namhyung Kim authored
It didn't use the passed field separator (using -x option) when it prints the metric headers and always put "," between the fields. Before: $ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true core,cpus,% tma_core_bound: <<<--- here: "core,cpus," but ":" expected S0-D0-C0:2:10.5: S0-D0-C1:2:14.8: S0-D0-C2:2:9.9: S0-D0-C3:2:13.2: After: $ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true core:cpus:% tma_core_bound: S0-D0-C0:2:10.5: S0-D0-C1:2:15.0: S0-D0-C2:2:16.5: S0-D0-C3:2:12.5: Tested-by:
-
Namhyung Kim authored
The new --per-cluster option was added recently but it forgot to update the aggr_header fields which are used for --metric-only option. And it resulted in a segfault due to NULL string in fputs(). Fixes: cbc917a1 ("perf stat: Support per-cluster aggregation") Reviewed-by:
Yicong Yang <yangyicong@hisilicon.com> Tested-by:
-
James Clark authored
Arm PMUs have a suffix, either a single decimal (armv8_pmuv3_0) or 3 hex digits which (armv8_cortex_a53) which Perf assumes are both strippable suffixes for the purposes of deduplication. S390 "cpum_cf" is a similarly suffixed core PMU but is only two characters so is not treated as strippable because the rules are a minimum of 3 hex characters or 1 decimal character. There are two paths involved in listing PMU events: * HW/cache event printing assumes core PMUs don't have suffixes so doesn't try to strip. * Sysfs PMU events share the printing function with uncore PMUs which strips. This results in slightly inconsistent Perf list behavior if a core PMU has a suffix: # perf list ... armv8_pmuv3_0/branch-load-misses/ armv8_pmuv3/l3d_cache_wb/ [Kernel PMU event] ... Fix it by partially reverting back to the old list behavior where stripping was only done for uncore PMUs. For example commit 8d9f5146 ("perf pmus: Sort pmus by name then suffix") mentions that only PMUs starting 'uncore_' are considered to have a potential suffix. This change doesn't go back that far, but does only strip PMUs that are !is_core. This keeps the desirable behavior where the many possibly duplicated uncore PMUs aren't repeated, but it doesn't break listing for core PMUs. Searching for a PMU continues to use the new stripped comparison functions, meaning that it's still possible to request an event by specifying the common part of a PMU name, or even open events on multiple similarly named PMUs. For example: # perf stat -e armv8_cortex/inst_retired/ 5777173628 armv8_cortex_a53/inst_retired/ (99.93%) 7469626951 armv8_cortex_a57/inst_retired/ (49.88%) Fixes: 3241d46f ("perf pmus: Sort/merge/aggregate PMUs like mrvl_ddr_pmu") Suggested-by:
Ian Rogers <irogers@google.com> Signed-off-by:
-
James Clark authored
Commit b2b9d3a3 ("perf pmu: Support wildcards on pmu name in dynamic pmu events") gives the following example for wildcarding a subset of PMUs: E.g., in a system with the following dynamic pmus: mypmu_0 mypmu_1 mypmu_2 mypmu_4 perf stat -e mypmu_[01]/<config>/ Since commit f91fa2ae ("perf pmu: Refactor perf_pmu__match()"), only "*" has been supported, removing the ability to subset PMUs, even though parse-events.l still supports ? and [] characters. Fix it by using fnmatch() when any glob character is detected and add a test which covers that and other scenarios of perf_pmu__match_ignoring_suffix(). Fixes: f91fa2ae ("perf pmu: Refactor perf_pmu__match()") Signed-off-by:
-
Namhyung Kim authored
It's possible to save pipe output of perf record into a file. $ perf record -o- ... > pipe.data And you can use the data same as the normal perf data. $ perf report -i pipe.data In that case, perf tools will treat the input as a pipe, but it can get the total size of the input. This means it can show the progress bar unlike the normal pipe input (which doesn't know the total size in advance). While at it, fix the string in __perf_session__process_dir_events(). Reviewed-by:
-
- 26 Jun, 2024 9 commits
-
-
Veronika Molnarova authored
The test has been failing for some time when two separate runs of perf benchmarks are recorded for cycles events and their counts are compared, while once the recording was done with option --bpf-counters and once without it. It is expected that the count of the samples should be within a certain range, firstly the difference was set to be within 10%, which was then later raised to 20%. However, the test case keeps failing on certain architectures as recording the provided benchmark can produce completely different counts based on the current load of the system. Sampling two separate runs on intel-eaglestream-spr-13 of "perf stat --no-big-num -e cycles -- perf bench sched messaging -g 1 -l 100 -t": Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t': 396782898 cycles 0.010051983 seconds time elapsed 0.008664000 seconds user 0.097058000 seconds sys Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t': 1431133032 cycles 0.021803714 seconds time elapsed 0.023377000 seconds user 0.349918000 seconds sys , which is ranging from 400mil to 1400mil samples. Instead of recording the cycles use instructions event, which provides more stable values. At the same time change the tested workload to one of the provided testing workloads by perf that is not based on a scheduler, which can provide another dependency on the current load. Sampling instructions event with the new workload provide much more stable results on intel-eaglestream-spr-13 of "perf stat --no-big-num -e instructions -- perf test -w brstack": Performance counter stats for 'perf test -w brstack': 64584494 instructions 0.009173945 seconds time elapsed 0.007262000 seconds user 0.002071000 seconds sys Performance counter stats for 'perf test -w brstack': 64672669 instructions 0.008888135 seconds time elapsed 0.005018000 seconds user 0.004018000 seconds sys Signed-off-by:Veronika Molnarova <vmolnaro@redhat.com> Acked-by:
-
Ian Rogers authored
The python build now depends on libraries and doesn't use python-ext-sources except for the util/python.c dependency. Switch to just directly depending on that file and util/setup.py. This allows the removal of python-ext-sources. Signed-off-by:
-
Ian Rogers authored
setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by:
-
Ian Rogers authored
Make the util directory into its own library. This is done to avoid compiling code twice, once for the perf tool and once for the perf python module. For convenience: arch/common.c scripts/perl/Perf-Trace-Util/Context.c scripts/python/Perf-Trace-Util/Context.c are made part of this library. Signed-off-by:
-
Ian Rogers authored
Make the benchmark code into a library so it may be linked against things like the python module to avoid compiling code twice. Signed-off-by:
-
Ian Rogers authored
Make the tests code its own library. This is done to avoid compiling code twice, once for the perf tool and once for the perf python module. Signed-off-by:
-
Ian Rogers authored
Make pmu-events into a library so it may be linked against things like the python module and not built from source. Signed-off-by:
-
Ian Rogers authored
Make the ui code its own library. This is done to avoid compiling code twice, once for the perf tool and once for the perf python module. Signed-off-by:
-
Ian Rogers authored
Fix some excessively long lines by deploying '\'. Signed-off-by:
-
- 25 Jun, 2024 14 commits
-
-
Namhyung Kim authored
Guilherme reported a crash in perf mem record. It's because the perf_mem_event->name was NULL on his machine. It should just return a NULL string when it has no format string in the name. The backtrace at the crash is below: Program received signal SIGSEGV, Segmentation fault. __strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67 67 vmovdqu (%rdi), %ymm2 (gdb) bt #0 __strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67 #1 0x00007ffff6c982de in __find_specmb (format=0x0) at printf-parse.h:82 #2 __printf_buffer (buf=buf@entry=0x7fffffffc760, format=format@entry=0x0, ap=ap@entry=0x7fffffffc880, mode_flags=mode_flags@entry=0) at vfprintf-internal.c:649 #3 0x00007ffff6cb7840 in __vsnprintf_internal (string=<optimized out>, maxlen=<optimized out>, format=0x0, args=0x7fffffffc880, mode_flags=mode_flags@entry=0) at vsnprintf.c:96 #4 0x00007ffff6cb787f in ___vsnprintf (string=<optimized out>, maxlen=<optimized out>, format=<optimized out>, args=<optimized out>) at vsnprintf.c:103 #5 0x00005555557b9391 in scnprintf (buf=0x555555fe9320 <mem_loads_name> "", size=100, fmt=0x0) at ../lib/vsprintf.c:21 #6 0x00005555557b74c3 in perf_pmu__mem_events_name (i=0, pmu=0x555556832180) at util/mem-events.c:106 #7 0x00005555557b7ab9 in perf_mem_events__record_args (rec_argv=0x55555684c000, argv_nr=0x7fffffffca20) at util/mem-events.c:252 #8 0x00005555555e370d in __cmd_record (argc=3, argv=0x7fffffffd760, mem=0x7fffffffcd80) at builtin-mem.c:156 #9 0x00005555555e49c4 in cmd_mem (argc=4, argv=0x7fffffffd760) at builtin-mem.c:514 #10 0x000055555569716c in run_builtin (p=0x555555fcde80 <commands+672>, argc=8, argv=0x7fffffffd760) at perf.c:349 #11 0x0000555555697402 in handle_internal_command (argc=8, argv=0x7fffffffd760) at perf.c:402 #12 0x0000555555697560 in run_argv (argcp=0x7fffffffd59c, argv=0x7fffffffd590) at perf.c:446 #13 0x00005555556978a6 in main (argc=8, argv=0x7fffffffd760) at perf.c:562 Reported-by:Guilherme Amadio <amadio@cern.ch> Reviewed-by:
Kan Liang <kan.liang@linux.intel.com> Closes: https://lore.kernel.org/linux-perf-users/Zlns_o_IE5L28168@cern.chSigned-off-by:
-
Namhyung Kim authored
A compiler warning on the second argument of bsearch() should not be NULL, but there's a case we might pass it. Let's return early if we don't have any DSOs to search in __dsos__find_by_longname_id(). util/dsos.c:184:8: runtime error: null pointer passed as argument 2, which is declared to never be null Reported-by:
kernel test robot <oliver.sang@intel.com> Reviewed-by:
-
Namhyung Kim authored
In dso__load(), it checks if the dso is a kernel module by looking the symtab type. Actually dso has 'is_kmod' field to check that easily and dso__set_module_info() set the symtab type and the is_kmod bit. So it should have the same result to check the is_kmod bit. Reviewed-by:
-
Namhyung Kim authored
It's expected that both hist entries are in the same hists when comparing two. But the current code in the function checks one without dso sort key and other with the key. This would make the condition true in any case. I guess the intention of the original commit was to add '!' for the right side too. But as it should be the same, let's just remove it. Fixes: 69849fc5 ("perf hists: Move sort__has_dso into struct perf_hpp_list") Reviewed-by:
-
Junhao He authored
In the previous loop, all the members in the aliases[j-1] have been freed and set to NULL. But in this loop, the function pmu_alias_is_duplicate() compares the aliases[j] with the aliases[j-1] that has already been disposed, so the function will always return false and duplicate aliases will never be discarded. If we find duplicate aliases, it skips the zfree aliases[j], which is accompanied by a memory leak. We can use the next aliases[j+1] to theck for duplicate aliases to fixes the aliases NULL pointer dereference, then goto zfree code snippet to release it. After patch testing: $ perf list --unit=hisi_sicl,cpa pmu uncore cpa: cpa_p0_rd_dat_32b [Number of read ops transmitted by the P0 port which size is 32 bytes. Unit: hisi_sicl,cpa] cpa_p0_rd_dat_64b [Number of read ops transmitted by the P0 port which size is 64 bytes. Unit: hisi_sicl,cpa] Fixes: c3245d20 ("perf pmu: Abstract alias/event struct") Signed-off-by:Junhao He <hejunhao3@huawei.com> Cc: ravi.bangoria@amd.com Cc: james.clark@arm.com Cc: prime.zeng@hisilicon.com Cc: cuigaosheng1@huawei.com Cc: jonathan.cameron@huawei.com Cc: linuxarm@huawei.com Cc: yangyicong@huawei.com Cc: robh@kernel.org Cc: renyu.zj@linux.alibaba.com Cc: kjain@linux.ibm.com Cc: john.g.garry@oracle.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Yunseong Kim authored
Add malloc() failure handling in unread_unwind_spec_debug_frame(). This make caller find_proc_info() works well when the allocation failure. Signed-off-by:
Yunseong Kim <yskelg@gmail.com> Reviewed-by:
-
Yunseong Kim authored
This patch resolve following warning. tools/perf/util/evsel.c:1620:9: error: result of comparison of constant -1 with expression of type 'char' is always false -Werror,-Wtautological-constant-out-of-range-compare 1620 | if (c == -1) | ~ ^ ~~ Signed-off-by: -
Fernand Sieber authored
When using perf timehist, sch delay is only computed for a waking task, not for a pre empted task. This patches changes sch delay to account for both. This makes sense as testing scheduling policy need to consider the effect of scheduling delay globally, not only for waking tasks. Example of `perf timehist` report before the patch for `stress` task competing with each other. First column is wait time, second column sch delay, third column runtime. 1.492060 [0000] s stress[81] 1.999 0.000 2.000 R next: stress[83] 1.494060 [0000] s stress[83] 2.000 0.000 2.000 R next: stress[81] 1.496060 [0000] s stress[81] 2.000 0.000 2.000 R next: stress[83] 1.498060 [0000] s stress[83] 2.000 0.000 1.999 R next: stress[81] After the patch, it looks like this (note that all wait time is not zero anymore): 1.492060 [0000] s stress[81] 1.999 1.999 2.000 R next: stress[83] 1.494060 [0000] s stress[83] 2.000 2.000 2.000 R next: stress[81] 1.496060 [0000] s stress[81] 2.000 2.000 2.000 R next: stress[83] 1.498060 [0000] s stress[83] 2.000 2.000 1.999 R next: stress[81] Signed-off-by:
Fernand Sieber <sieberf@amazon.com> Reviewed-by:
-
Adrian Hunter authored
Add samples of APX and other new instructions to the 'x86 instruction decoder - new instructions' test. Note the test is only available if the perf tool has been built with EXTRA_TESTS=1. Example: $ make EXTRA_TESTS=1 -C tools/perf $ tools/perf/perf test -F -v 'new ins' |& grep -i 'jmpabs\|popp\|pushp' Decoded ok: d5 00 a1 ef cd ab 90 78 56 34 12 jmpabs $0x1234567890abcdef Decoded ok: d5 08 53 pushp %rbx Decoded ok: d5 18 50 pushp %r16 Decoded ok: d5 19 57 pushp %r31 Decoded ok: d5 19 5f popp %r31 Decoded ok: d5 18 58 popp %r16 Decoded ok: d5 08 5b popp %rbx Signed-off-by:
-
Adrian Hunter authored
JMPABS is 64-bit absolute direct jump instruction, encoded with a mandatory REX2 prefix. JMPABS is designed to be used in the procedure linkage table (PLT) to replace indirect jumps, because it has better performance. In that case the jump target will be amended at run time. To enable Intel PT to follow the code, a TIP packet is always emitted when JMPABS is traced under Intel PT. Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture Specification for details. Decode JMPABS as an indirect jump, because it has an associated TIP packet the same as an indirect jump and the control flow should follow the TIP packet payload, and not assume it is the same as the on-file object code JMPABS target address. Signed-off-by:
-
Chaitanya S Prakash authored
Test "perf probe of function from different CU" only checks if the perf command has failed and doesn't test the --funcs output. In the issue reported in the previous commit, the garbage output of the --funcs command was being ignored by the test when it could have been caught. The script first makes use of --funcs option with the perf probe command to check if the function "foo" exists in the testfile before adding a probe to it in the next command. The output of probe...--funcs command is redirected to stdout, therefore, add '| grep "foo"' to validate the result. Signed-off-by:
Chaitanya S Prakash <chaitanyas.prakash@arm.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: anshuman.khandual@arm.com Cc: james.clark@arm.com Signed-off-by:
-
Athira Rajeev authored
perf test "perf script tests" fails as below in systems with python 3.6 File "/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py", line 442 if line := p.stdout.readline(): ^ SyntaxError: invalid syntax --- Cleaning up --- ---- end(-1) ---- 92: perf script tests: FAILED! This happens because ":=" is a new syntax that assigns values to variables as part of a larger expression. This is introduced from python 3.8 and hence fails in setup with python 3.6 Address this by splitting the large expression and check the value in two steps: Previous line: if line := p.stdout.readline(): Current change: line = p.stdout.readline() if line: With patch ./perf test "perf script tests" 93: perf script tests: Ok Signed-off-by:Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by:
-
Athira Rajeev authored
commit 80d496be ("perf report: Add support for profiling JIT generated code") added support for profiling JIT generated code. This patch handles dso's of form "/tmp/perf-$PID.map". Some of the references doesn't check exactly for same pattern. some uses "if (!strncmp(dso_name, "/tmp/perf-", 10))". Fix this by using helper function perf_pid_map_tid and is_perf_pid_map_name which looks for proper pattern of form: "/tmp/perf-$PID.map" for these checks. Signed-off-by:
-
Athira Rajeev authored
Perf test for perf probe of function from different CU fails as below: ./perf test -vv "test perf probe of function from different CU" 116: test perf probe of function from different CU: --- start --- test child forked, pid 2679 Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile Error: Failed to add events. --- Cleaning up --- "foo" does not hit any event. Error: Failed to delete events. ---- end(-1) ---- 116: test perf probe of function from different CU : FAILED! The test does below to probe function "foo" : # gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o # gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o # gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o # ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile Error: Failed to add events. Perf probe fails to find symbol foo in the executable placed in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7 Simple reproduce: # mktemp -d /tmp/perf-checkXXXXXXXXXX /tmp/perf-checkcWpuLRQI8j # gcc -g -o test test.c # cp test /tmp/perf-checkcWpuLRQI8j/ # nm /tmp/perf-checkcWpuLRQI8j/test | grep foo 00000000100006bc T foo # ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test Error: Failed to add events. But it works with any files like /tmp/perf/test. Only for patterns with "/tmp/perf-", this fails. Further debugging, commit 80d496be ("perf report: Add support for profiling JIT generated code") added support for profiling JIT generated code. This patch handles dso's of form "/tmp/perf-$PID.map" . The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)" to match "/tmp/perf-$PID.map". With this commit, any dso in /tmp/perf- folder will be considered separately for processing (not only JIT created map files ). Fix this by changing the string pattern to check for "/tmp/perf-%d.map". Add a helper function is_perf_pid_map_name to do this check. In "struct dso", dso->long_name holds the long name of the dso file. Since the /tmp/perf-$PID.map check uses the complete name, use dso___long_name for the string name. With the fix, # ./perf test "test perf probe of function from different CU" 117: test perf probe of function from different CU : Ok Fixes: 56cbeacf ("perf probe: Add test for regression introduced by switch to die_get_decl_file()") Signed-off-by:
-
- 24 Jun, 2024 1 commit
-
-
James Clark authored
The 2 second sleep can cause the test to fail on very slow network file systems because Perf ends up being killed before it finishes starting up. Fix it by making the leafloop workload end after a fixed time like the other workloads so there is no need to kill it after 2 seconds. Also remove the 1 second start sampling delay because it is similarly fragile. Instead, search through all samples for a matching one, rather than just checking the first sample and hoping it's in the right place. Fixes: cd6382d8 ("perf test arm64: Test unwinding using fame-pointer (fp) mode") Signed-off-by:
-
- 21 Jun, 2024 4 commits
-
-
Guilherme Amadio authored
When either of these have a shorter version, like 1.8, the expression that computes the version has a syntax error that can be seen in the output of make: expr: syntax error: missing argument after + Link: https://bugs.gentoo.org/917559Reported-by:
Peter Volkov <peter.volkov@gmail.com> Signed-off-by:
Guilherme Amadio <amadio@gentoo.org> Reviewed-by:
Leo Yan <leo.yan@arm.com> Signed-off-by:
-
Guilherme Amadio authored
Needed to add required include directories for the feature detection to succeed. The header tracefs.h is installed either into the include directory /usr/include/tracefs/tracefs.h when using the Makefile, or into /usr/include/libtracefs/tracefs.h when using meson to build libtracefs. The header tracefs.h uses #include <event-parse.h> from libtraceevent, so pkg-config needs to pick the correct include directory for libtracefs and add the one for libtraceevent to succeed. Note that in baa2ca59 the variable LIBTRACEEVENT_DIR was introduced, and now the method to compile against non-standard locations requires PKG_CONFIG_PATH to be set instead, which works for both libtraceevent and libtracefs. Signed-off-by:
-
Ian Rogers authored
When PMUs have a cpu map in the 'cpus' or 'cpumask' file, perf will try to open events on those CPUs. ARM doesn't remove offline CPUs meaning taking a CPU offline will cause perf commands to fail unless a CPU map is passed on the command line. More context in: https://lore.kernel.org/lkml/20240603092812.46616-1-yangyicong@huawei.com/Reported-by:
Yicong Yang <yangyicong@huawei.com> Closes: https://lore.kernel.org/lkml/20240603092812.46616-2-yangyicong@huawei.com/Signed-off-by:
-
Kan Liang authored
The hard-coded metrics is wrongly calculated on the hybrid machine. $ perf stat -e cycles,instructions -a sleep 1 Performance counter stats for 'system wide': 18,205,487 cpu_atom/cycles/ 9,733,603 cpu_core/cycles/ 9,423,111 cpu_atom/instructions/ # 0.52 insn per cycle 4,268,965 cpu_core/instructions/ # 0.23 insn per cycle The insn per cycle for cpu_core should be 4,268,965 / 9,733,603 = 0.44. When finding the metric events, the find_stat() doesn't take the PMU type into account. The cpu_atom/cycles/ is wrongly used to calculate the IPC of the cpu_core. In the hard-coded metrics, the events from a different PMU are only SW_CPU_CLOCK and SW_TASK_CLOCK. They both have the stat type, STAT_NSECS. Except the SW CLOCK events, check the PMU type as well. Fixes: 0a57b910 ("perf stat: Use counts rather than saved_value") Reported-by:Khalil, Amiri <amiri.khalil@intel.com> Reviewed-by:
-
- 20 Jun, 2024 1 commit
-
-
Ian Rogers authored
Add counter information necessary for optimizing event grouping the perf tool. The most recent RFC patch set using this information: https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/ The information was added in: https://github.com/intel/perfmon/commit/475892a9690cb048949e593fe39cee65cd4765e1 and later patches. Co-authored-by:
Weilin Wang <weilin.wang@intel.com> Co-authored-by:
Caleb Biggers <caleb.biggers@intel.com> Signed-off-by:
-
