- 26 Nov, 2011 13 commits
-
-
Johannes Berg authored
commit 6c739419 upstream. Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Johannes Berg authored
commit 5b2bbf75 upstream. ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Signed-off-by:
-
Johannes Berg authored
commit f8d1ccf1 upstream. When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc885189 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by:
Xiaokang Qin <xiaokang.qin@intel.com> Signed-off-by:
-
Gertjan van Wingerde authored
commit ed66ba47 upstream. The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672Tested-by:
Tomas Trnka <tomastrnka@gmx.com> Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Jesper Juhl authored
commit fe09b32a upstream. If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Catalin Marinas authored
commit 8428e84d upstream. Recent gcc versions generate unaligned accesses by default on ARMv6 and later processors. This patch ensures that the SCTLR.A bit is always cleared on such processors to avoid kernel traping before alignment_init() is called. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
John Linn <John.Linn@xilinx.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Cornelia Huck authored
commit 9e6dabef upstream. CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Tony Jago authored
commit 62dd28d0 upstream. Hauppauge have released a new model rev, sub id 8940, this adds support. [stoth@kernellabs.com: I modified Tony's patch slightly in relation to the card numbering in saa7164.h, appending rather than inserting the new card - normal practise] Signed-off-by:
Tony Jago <tony@hammertelecom.com.au> Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Vasily Averin authored
commit cf16123c upstream. Aacraid controller can hang on some nodes if kernel uses non-default (powersave) ASPM policy. Controller hangs shortly after successful load and hardware detection. Scsi error handler detects this hang and tries to restart hardware but it does not help. Initially it was noticed on RHEL6-based openVZ kernel after backporting aacraid driver from mainline (RHEL6 kernel with original driver works well) http://bugzilla.openvz.org/show_bug.cgi?id=2043 This issue happens because default ASPM policy was changed in Red Hat kernels. Therefore guys from Red Hat have noticed this problem long time ago: on Fedora 12 https://bugzilla.redhat.com/show_bug.cgi?id=540478 on Fedora 14 https://bugzilla.redhat.com/show_bug.cgi?id=679385 In RHEL6 kernel this issue was fixed, ASPM was disabled in aacraid driver. In kernel changelog I've found that seems it was done by Matthew Garrett: - [scsi] aacraid: Disable ASPM by default (Matthew Garrett) [599735] However seems this patch was not submitted to mainline. I've reproduced this issue on vanilla 3.1.0 kernel booted with "pcie_aspm.policy=powersave" option, So I believe it makes sense to do it now. Signed-off-by:
Vasily Averin <vvs@sw.ru> [mjg: Checking the Windows drivers indicates that they disable ASPM under all circumstances, so:] Acked-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Matthew Garrett authored
commit e5a44df8 upstream. The Windows driver .inf disables ASPM on hpsa devices. Do the same because the selection of a non default ASPM policy can cause the device to hang. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
James Bottomley authored
commit 4e6c82b3 upstream. On Mon, 2011-11-07 at 17:24 +1100, Stephen Rothwell wrote: > Hi all, > > Starting some time last week I am getting the following during boot on > our PPC970 blade: > > calling .ipr_init+0x0/0x68 @ 1 > ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011) > ipr 0000:01:01.0: Found IOA with IRQ: 26 > ipr 0000:01:01.0: Starting IOA initialization sequence. > ipr 0000:01:01.0: Adapter firmware version: 06160039 > ipr 0000:01:01.0: IOA initialized. > scsi0 : IBM 572E Storage Adapter > ------------[ cut here ]------------ > WARNING: at drivers/scsi/scsi_lib.c:1704 > Modules linked in: > NIP: c00000000053b3d4 LR: c00000000053e5b0 CTR: c000000000541d70 > REGS: c0000000783c2f60 TRAP: 0700 Not tainted (3.1.0-autokern1) > MSR: 8000000000029032 <EE,ME,CE,IR,DR> CR: 24002024 XER: 20000002 > TASK = c0000000783b8000[1] 'swapper' THREAD: c0000000783c0000 CPU: 0 > GPR00: 0000000000000001 c0000000783c31e0 c000000000cf38b0 c00000000239a9d0 > GPR04: c000000000cbe8f8 0000000000000000 c0000000783c3040 0000000000000000 > GPR08: c000000075daf488 c000000078a3b7ff c000000000bcacc8 0000000000000000 > GPR12: 0000000044002028 c000000007ffb000 0000000002e40000 000000000099b800 > GPR16: 0000000000000000 c000000000bba5fc c000000000a61db8 0000000000000000 > GPR20: 0000000001b77200 0000000000000000 c000000078990000 0000000000000001 > GPR24: c000000002396828 0000000000000000 0000000000000000 c000000078a3b938 > GPR28: fffffffffffffffa c0000000008ad2c0 c000000000c7faa8 c00000000239a9d0 > NIP [c00000000053b3d4] .scsi_free_queue+0x24/0x90 > LR [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > Call Trace: > [c0000000783c31e0] [c000000000c7faa8] wireless_seq_fops+0x278d0/0x2eb88 (unreliable) > [c0000000783c3270] [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0 > [c0000000783c3330] [c00000000053eba0] .scsi_probe_and_add_lun+0x390/0xb40 > [c0000000783c34a0] [c00000000053f7ec] .__scsi_scan_target+0x16c/0x650 > [c0000000783c35f0] [c00000000053fd90] .scsi_scan_channel+0xc0/0x100 > [c0000000783c36a0] [c00000000053fefc] .scsi_scan_host_selected+0x12c/0x1c0 > [c0000000783c3750] [c00000000083dcb4] .ipr_probe+0x2c0/0x390 > [c0000000783c3830] [c0000000003f50b4] .local_pci_probe+0x34/0x50 > [c0000000783c38a0] [c0000000003f5f78] .pci_device_probe+0x148/0x150 > [c0000000783c3950] [c0000000004e1e8c] .driver_probe_device+0xdc/0x210 > [c0000000783c39f0] [c0000000004e20cc] .__driver_attach+0x10c/0x110 > [c0000000783c3a80] [c0000000004e1228] .bus_for_each_dev+0x98/0xf0 > [c0000000783c3b30] [c0000000004e1bf8] .driver_attach+0x28/0x40 > [c0000000783c3bb0] [c0000000004e07d8] .bus_add_driver+0x218/0x340 > [c0000000783c3c60] [c0000000004e2a2c] .driver_register+0x9c/0x1b0 > [c0000000783c3d00] [c0000000003f62d4] .__pci_register_driver+0x64/0x140 > [c0000000783c3da0] [c000000000b99f88] .ipr_init+0x4c/0x68 > [c0000000783c3e20] [c00000000000ad24] .do_one_initcall+0x1a4/0x1e0 > [c0000000783c3ee0] [c000000000b512d0] .kernel_init+0x14c/0x1fc > [c0000000783c3f90] [c000000000022468] .kernel_thread+0x54/0x70 > Instruction dump: > ebe1fff8 7c0803a6 4e800020 7c0802a6 fba1ffe8 fbe1fff8 7c7f1b78 f8010010 > f821ff71 e8030398 3120ffff 7c090110 <0b000000> e86303b0 482de065 60000000 > ---[ end trace 759bed76a85e8dec ]--- > scsi 0:0:1:0: Direct-Access IBM-ESXS MAY2036RC T106 PQ: 0 ANSI: 5 > ------------[ cut here ]------------ > > I get lots more of these. The obvious commit to point the finger at > is 3308511c ("[SCSI] Make scsi_free_queue() kill pending SCSI > commands") but the root cause may be something different. Caused by commit f7c9c6bb Author: Anton Blanchard <anton@samba.org> Date: Thu Nov 3 08:56:22 2011 +1100 [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev Doesn't completely do the teardown. The true fix is to do a proper teardown instead of hand rolling it Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
-
Takashi Iwai authored
commit 05ee7964 upstream. spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Edward Donovan authored
commit c75d720f upstream. commit d05c65ff ("genirq: spurious: Run only one poller at a time") introduced a regression, leaving the boot options 'irqfixup' and 'irqpoll' non-functional. The patch placed tests in each function, to exit if the function is already running. The test in 'misrouted_irq' exited when it should have proceeded, effectively disabling 'misrouted_irq' and 'poll_spurious_irqs'. The check for an already running poller needs to be "!= 1" not "== 1" as "1" is the value when the first poller starts running. Signed-off-by:
Edward Donovan <edward.donovan@numble.net> Cc: maciej.rutecki@gmail.com Link: http://lkml.kernel.org/r/1320175784-6745-1-git-send-email-edward.donovan@numble.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 21 Nov, 2011 27 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit 6b76106d upstream. Even after commit 54787556 ("block: check for proper length of iov entries earlier ...") we still won't check for zero-length entries after an unaligned entry. Remove the break-statement, so all entries are checked. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Rabin Vincent authored
commit 7a401a97 upstream. bdi_prune_sb() in bdi_unregister() attempts to removes the bdi links from all super_blocks and then del_timer_sync() the writeback timer. However, this can race with __mark_inode_dirty(), leading to bdi_wakeup_thread_delayed() rearming the writeback timer on the bdi we're unregistering, after we've called del_timer_sync(). This can end up with the bdi being freed with an active timer inside it, as in the case of the following dump after the removal of an SD card. Fix this by redoing the del_timer_sync() in bdi_destory(). ------------[ cut here ]------------ WARNING: at /home/rabin/kernel/arm/lib/debugobjects.c:262 debug_print_object+0x9c/0xc8() ODEBUG: free active (active state 0) object type: timer_list hint: wakeup_timer_fn+0x0/0x180 Modules linked in: Backtrace: [<c00109dc>] (dump_backtrace+0x0/0x110) from [<c0236e4c>] (dump_stack+0x18/0x1c) r6:c02bc638 r5:00000106 r4:c79f5d18 r3:00000000 [<c0236e34>] (dump_stack+0x0/0x1c) from [<c0025e6c>] (warn_slowpath_common+0x54/0x6c) [<c0025e18>] (warn_slowpath_common+0x0/0x6c) from [<c0025f28>] (warn_slowpath_fmt+0x38/0x40) r8:20000013 r7:c780c6f0 r6:c031613c r5:c780c6f0 r4:c02b1b29 r3:00000009 [<c0025ef0>] (warn_slowpath_fmt+0x0/0x40) from [<c015eb4c>] (debug_print_object+0x9c/0xc8) r3:c02b1b29 r2:c02bc662 [<c015eab0>] (debug_print_object+0x0/0xc8) from [<c015f574>] (debug_check_no_obj_freed+0xac/0x1dc) r6:c7964000 r5:00000001 r4:c7964000 [<c015f4c8>] (debug_check_no_obj_freed+0x0/0x1dc) from [<c00a9e38>] (kmem_cache_free+0x88/0x1f8) [<c00a9db0>] (kmem_cache_free+0x0/0x1f8) from [<c014286c>] (blk_release_queue+0x70/0x78) [<c01427fc>] (blk_release_queue+0x0/0x78) from [<c015290c>] (kobject_release+0x70/0x84) r5:c79641f0 r4:c796420c [<c015289c>] (kobject_release+0x0/0x84) from [<c0153ce4>] (kref_put+0x68/0x80) r7:00000083 r6:c74083d0 r5:c015289c r4:c796420c [<c0153c7c>] (kref_put+0x0/0x80) from [<c01527d0>] (kobject_put+0x48/0x5c) r5:c79643b4 r4:c79641f0 [<c0152788>] (kobject_put+0x0/0x5c) from [<c013ddd8>] (blk_cleanup_queue+0x68/0x74) r4:c7964000 [<c013dd70>] (blk_cleanup_queue+0x0/0x74) from [<c01a6370>] (mmc_blk_put+0x78/0xe8) r5:00000000 r4:c794c400 [<c01a62f8>] (mmc_blk_put+0x0/0xe8) from [<c01a64b4>] (mmc_blk_release+0x24/0x38) r5:c794c400 r4:c0322824 [<c01a6490>] (mmc_blk_release+0x0/0x38) from [<c00de11c>] (__blkdev_put+0xe8/0x170) r5:c78d5e00 r4:c74083c0 [<c00de034>] (__blkdev_put+0x0/0x170) from [<c00de2c0>] (blkdev_put+0x11c/0x12c) r8:c79f5f70 r7:00000001 r6:c74083d0 r5:00000083 r4:c74083c0 r3:00000000 [<c00de1a4>] (blkdev_put+0x0/0x12c) from [<c00b0724>] (kill_block_super+0x60/0x6c) r7:c7942300 r6:c79f4000 r5:00000083 r4:c74083c0 [<c00b06c4>] (kill_block_super+0x0/0x6c) from [<c00b0a94>] (deactivate_locked_super+0x44/0x70) r6:c79f4000 r5:c031af64 r4:c794dc00 r3:c00b06c4 [<c00b0a50>] (deactivate_locked_super+0x0/0x70) from [<c00b1358>] (deactivate_super+0x6c/0x70) r5:c794dc00 r4:c794dc00 [<c00b12ec>] (deactivate_super+0x0/0x70) from [<c00c88b0>] (mntput_no_expire+0x188/0x194) r5:c794dc00 r4:c7942300 [<c00c8728>] (mntput_no_expire+0x0/0x194) from [<c00c95e0>] (sys_umount+0x2e4/0x310) r6:c7942300 r5:00000000 r4:00000000 r3:00000000 [<c00c92fc>] (sys_umount+0x0/0x310) from [<c000d940>] (ret_fast_syscall+0x0/0x30) ---[ end trace e5c83c92ada51c76 ]--- Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Anton Blanchard authored
commit d715e433 upstream. kdump fails because we try to execute an HV only instruction. Feature fixups are being applied after we copy the exception vectors down to 0 so they miss out on any updates. We have always had this issue but it only became critical in v3.0 when we added CFAR support (breaks POWER5) and v3.1 when we added POWERNV (breaks everyone). Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Neuling authored
commit de1d9248 upstream. If you build with KVM and UP it fails with the following due to a missing include. /arch/powerpc/kvm/book3s_hv.c: In function 'do_h_register_vpa': arch/powerpc/kvm/book3s_hv.c:156:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:156:10: note: each undeclared identifier is reported only once for each function it appears in arch/powerpc/kvm/book3s_hv.c:192:12: error: 'H_RESOURCE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:222:9: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c: In function 'kvmppc_pseries_do_hcall': arch/powerpc/kvm/book3s_hv.c:228:30: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:232:7: error: 'H_CEDE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:234:7: error: 'H_PROD' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:238:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:250:7: error: 'H_CONFER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:252:7: error: 'H_REGISTER_VPA' undeclared (first use in this function) make[2]: *** [arch/powerpc/kvm/book3s_hv.o] Error 1 Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Geoff Levand authored
commit 72f3bea0 upstream. Fixes the PS3 bootup hang introduced in 3.0-rc1 by: commit 317f3941 sched: Move the second half of ttwu() to the remote cpu Move the PS3's LV1 EOI call lv1_end_of_interrupt_ext() from ps3_chip_eoi() to ps3_get_irq() for IPI messages. If lv1_send_event_locally() is called between a previous call to lv1_send_event_locally() and the coresponding call to lv1_end_of_interrupt_ext() the second event will not be delivered to the target cpu. The PS3's SMP IPIs are implemented using lv1_send_event_locally(), so if two IPI messages of the same type are sent to the same target in a relatively short period of time the second IPI event can become lost when lv1_end_of_interrupt_ext() is called from ps3_chip_eoi(). Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Dan Carpenter authored
commit 99cb2ddc upstream. gref->gref_id is unsigned so the error handling didn't work. gnttab_grant_foreign_access() returns an int type, so we can add a cast here, and it doesn't cause any problems. gnttab_grant_foreign_access() can return a variety of errors including -ENOSPC, -ENOSYS and -ENOMEM. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Dan Carpenter authored
commit 21643e69 upstream. On 32 bit systems a high value of op.count could lead to an integer overflow in the kzalloc() and gref_ids would be smaller than expected. If the you triggered another integer overflow in "if (gref_size + op.count > limit)" then you'd probably get memory corruption inside add_grefs(). Signed-off-by:
-
Zhenzhong Duan authored
commit 90d4f553 upstream. PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled need VCPU placement to work, or else it will softlockup. Acked-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
-
Thomas Weber authored
commit f09ee045 upstream. The codec for Devkit8000 (TWL4030) was not detected except when build with CONFIG_SND_SOC_ALL_CODECS. twl-core.c still uses the CONFIG_TWL4030_CODEC for twl_has_codec(). In commit 57fe7251 the CONFIG_TWL4030_CODEC was renamed into CONFIG_MFD_TWL4030_AUDIO, thatswhy the codec was not detected. This patch renames the CONFIG_ TWL4030_CODEC into CONFIG_MFD_TWL4030_AUDIO in twl-core.c. Signed-off-by:
Thomas Weber <weber@corscience.de> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
-
Rafał Miłecki authored
[This patch is supposed to be applied in 3.1 (and maybe older) branches only.] New kernels support newer firmware that users may try to incorrectly use with older kernels. Display error and explain the problem in such a case Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Arend van Spriel authored
commit 5a84d6ad upstream. The brcmsmac driver supports different rates on 5GHz but this is not taken into account when providing the rate index in the receive status information passed to mac80211. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Henry Ptasinski <henryp@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Alex Deucher authored
commit b872a374 upstream. Noticed by Egbert. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Egbert Eich <eich@suse.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit cb871513 upstream. Revert commit 6123b0e2. The problem this patch intends to solve has alreadqy been fixed by commit 7a5caabd ("drivers/leds/ledtrig-timer.c: fix broken sysfs delay handling"). Signed-off-by:
Johan Hovold <jhovold@gmail.com> Cc: Antonio Ospite <ospite@studenti.unina.it> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
commit bc5b8a90 upstream. On a corrupted file system the ->len field could be wrong leading to a buffer overflow. Reported-and-acked-by:
Clement LECIGNE <clement.lecigne@netasq.com> Signed-off-by:
-
David Howells authored
commit 9f35a33b upstream. Fix a NULL pointer deref in the user-defined key type whereby updating a negative key into a fully instantiated key will cause an oops to occur when the code attempts to free the non-existent old payload. This results in an oops that looks something like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff81085fa1>] __call_rcu+0x11/0x13e PGD 3391d067 PUD 3894a067 PMD 0 Oops: 0002 [#1] SMP CPU 1 Pid: 4354, comm: keyctl Not tainted 3.1.0-fsdevel+ #1140 /DG965RY RIP: 0010:[<ffffffff81085fa1>] [<ffffffff81085fa1>] __call_rcu+0x11/0x13e RSP: 0018:ffff88003d591df8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000006e RDX: ffffffff8161d0c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003d591e18 R08: 0000000000000000 R09: ffffffff8152fa6c R10: 0000000000000000 R11: 0000000000000300 R12: ffff88003b8f9538 R13: ffffffff8161d0c0 R14: ffff88003b8f9d50 R15: ffff88003c69f908 FS: 00007f97eb18c720(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000003d47a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process keyctl (pid: 4354, threadinfo ffff88003d590000, task ffff88003c78a040) Stack: ffff88003e0ffde0 ffff88003b8f9538 0000000000000001 ffff88003b8f9d50 ffff88003d591e28 ffffffff810860f0 ffff88003d591e68 ffffffff8117bfea ffff88003d591e68 ffffffff00000000 ffff88003e0ffde1 ffff88003e0ffde0 Call Trace: [<ffffffff810860f0>] call_rcu_sched+0x10/0x12 [<ffffffff8117bfea>] user_update+0x8d/0xa2 [<ffffffff8117723a>] key_create_or_update+0x236/0x270 [<ffffffff811789b1>] sys_add_key+0x123/0x17e [<ffffffff813b84bb>] system_call_fastpath+0x16/0x1b Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Jeff Layton <jlayton@redhat.com> Acked-by:
Neil Horman <nhorman@redhat.com> Acked-by:
Steve Dickson <steved@redhat.com> Acked-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
Takashi Iwai authored
commit dcaaf9f2 upstream. In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by:
Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by:
-
Takashi Iwai authored
commit 9fcd0ab1 upstream. When the initial check of dB-range failed due to the read error, try to check again at the later read, too. When an invalid dB range is found, remove TLV flags and notify the mixer info change. Signed-off-by:
-
Alex Deucher authored
commit 091264f0 upstream. Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by:
-
Marcin Slusarz authored
commit 5e60ee78 upstream. Fence lock needs to be initialized before any call to nouveau_channel_put because it calls nouveau_channel_idle->nouveau_fence_update which uses fence lock. BUG: spinlock bad magic on CPU#0, test/24134 lock: ffff88019f90dba8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800 Call Trace: spin_bug+0x9c/0xa3 do_raw_spin_lock+0x29/0x13c _raw_spin_lock+0x1e/0x22 nouveau_fence_update+0x2d/0xf1 nouveau_channel_idle+0x22/0xa0 nouveau_channel_put_unlocked+0x84/0x1bd nouveau_channel_put+0x20/0x24 nouveau_channel_alloc+0x4ec/0x585 nouveau_ioctl_fifo_alloc+0x50/0x130 drm_ioctl+0x289/0x361 do_vfs_ioctl+0x4dd/0x52c sys_ioctl+0x42/0x65 system_call_fastpath+0x16/0x1b It's easily triggerable from userspace. Additionally remove double initialization of chan->fence.pending. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Eric Anholt authored
commit 14660ccd upstream. I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
commit dfd3b596 upstream. In the case of 29bit mode, CAC/UNCAC_ADDR does not return a right address. This revises this problem by using P1SEGADDR and P2SEGADDR in 29bit mode. Reported-by:
Yutaro Ebihara <ebiharaml@si-linux.co.jp> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Tested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Mark Brown authored
commit 8eeea521 upstream. The field is no longer initialised so this will crash if running on wm8958. Reported-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Jochen Friedrich authored
commit dd0b3825 upstream. Since 193ab2a6, various AT91 boards don't register USBA adapters anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by:
Jochen Friedrich <jochen@scram.de> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 72103bd1 upstream. Commit 31a3ddda introduced a use after free in virtio-pci. The main issue is that the release method signals removal of the virtio device, while remove signals removal of the pci device. For example, on driver removal or hot-unplug, virtio_pci_release_dev is called before virtio_pci_remove. We then might get a crash as virtio_pci_remove tries to use the device freed by virtio_pci_release_dev. We allocate/free all resources together with the pci device, so we can leave the release method empty. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Takashi Iwai authored
commit aeb4b88e upstream. When a virtual mater control is created, the driver looks for slave elements from the assigned card instance. But this may include the elements of other codecs when multiple codecs are on the same HD-audio bus. This works at the first time, but it'll give Oops when it's once freed and re-created via reconfig sysfs. This patch changes the element-look-up strategy to limit only to the mixer elements of the same codec. Reported-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Julian Wollrath authored
commit f7f9bdfa upstream. Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by:
Julian Wollrath <jwollrath@web.de> Signed-off-by:
-
