- 20 Apr, 2021 7 commits
-
-
Sean Christopherson authored
If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid. Fixes: f6588660 ("KVM: fix memory leak in kvm_io_bus_unregister_dev()") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210412222050.876100-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Emanuele Giuseppe Esposito authored
KVM_CAP_PPC_MULTITCE is a capability, not an ioctl. Therefore move it from section 4.97 to the new 8.31 (other capabilities). To fill the gap, move KVM_X86_SET_MSR_FILTER (was 4.126) to 4.97, and shifted Xen-related ioctl (were 4.127 - 4.130) by one place (4.126 - 4.129). Also fixed minor typo in KVM_GET_MSR_INDEX_LIST ioctl description (section 4.3). Signed-off-by:
Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210316170814.64286-1-eesposit@redhat.com> Signed-off-by:
-
Keqian Zhu authored
kvm_mmu_slot_largepage_remove_write_access() is decared but not used, just remove it. Signed-off-by:
Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20210406063504.17552-1-zhukeqian1@huawei.com> Reviewed-by:
-
Sean Christopherson authored
Explicitly document why a vmcb must be marked dirty and assigned a new asid when it will be run on a different cpu. The "what" is relatively obvious, whereas the "why" requires reading the APM and/or KVM code. Opportunistically remove a spurious period and several unnecessary newlines in the comment. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a comment above the declaration of vcpu_svm.vmcb to call out that it is simply a shorthand for current_vmcb->ptr. The myriad accesses to svm->vmcb are quite confusing without this crucial detail. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove vmcb_pa from vcpu_svm and simply read current_vmcb->pa directly in the one path where it is consumed. Unlike svm->vmcb, use of the current vmcb's address is very limited, as evidenced by the fact that its use can be trimmed to a single dereference. Opportunistically add a comment about using vmcb01 for VMLOAD/VMSAVE, at first glance using vmcb01 instead of vmcb_pa looks wrong. No functional change intended. Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Do not update the new vmcb's last-run cpu when switching to a different vmcb. If the vCPU is migrated between its last run and a vmcb switch, e.g. for nested VM-Exit, then setting the cpu without marking the vmcb dirty will lead to KVM running the vCPU on a different physical cpu with stale clean bit settings. vcpu->cpu current_vmcb->cpu hardware pre_svm_run() cpu0 cpu0 cpu0,clean kvm_arch_vcpu_load() cpu1 cpu0 cpu0,clean svm_switch_vmcb() cpu1 cpu1 cpu0,clean pre_svm_run() cpu1 cpu1 kaboom Simply delete the offending code; unlike VMX, which needs to update the cpu at switch time due to the need to do VMPTRLD, SVM only cares about which cpu last ran the vCPU. Fixes: af18fa77 ("KVM: nSVM: Track the physical cpu of the vmcb vmrun through the vmcb") Cc: Cathy Avery <cavery@redhat.com> Signed-off-by:
-
- 19 Apr, 2021 18 commits
-
-
Tom Lendacky authored
Access to the GHCB is mainly in the VMGEXIT path and it is known that the GHCB will be mapped. But there are two paths where it is possible the GHCB might not be mapped. The sev_vcpu_deliver_sipi_vector() routine will update the GHCB to inform the caller of the AP Reset Hold NAE event that a SIPI has been delivered. However, if a SIPI is performed without a corresponding AP Reset Hold, then the GHCB might not be mapped (depending on the previous VMEXIT), which will result in a NULL pointer dereference. The svm_complete_emulated_msr() routine will update the GHCB to inform the caller of a RDMSR/WRMSR operation about any errors. While it is likely that the GHCB will be mapped in this situation, add a safe guard in this path to be certain a NULL pointer dereference is not encountered. Fixes: f1c6366e ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Fixes: 647daca2 ("KVM: SVM: Add support for booting APs in an SEV-ES guest") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Message-Id: <a5d3ebb600a91170fc88599d5a575452b3e31036.1617979121.git.thomas.lendacky@amd.com> Signed-off-by:
-
Wanpeng Li authored
If the target is self we do not need to yield, we can avoid malicious guest to play this. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1617941911-5338-3-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Wanpeng Li authored
To analyze some performance issues with lock contention and scheduling, it is nice to know when directed yield are successful or failing. Signed-off-by:
-
Wanpeng Li authored
Enable PV TLB shootdown when !CONFIG_SMP doesn't make sense. Let's move it inside CONFIG_SMP. In addition, we can avoid define and alloc __pv_cpu_mask when !CONFIG_SMP and get rid of 'alloc' variable in kvm_alloc_cpumask. Signed-off-by:
-
Ben Gardon authored
To avoid saddling a vCPU thread with the work of tearing down an entire paging structure, take a reference on each root before they become obsolete, so that the thread initiating the fast invalidation can tear down the paging structure and (most likely) release the last reference. As a bonus, this teardown can happen under the MMU lock in read mode so as not to block the progress of vCPU threads. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20210401233736.638171-14-bgardon@google.com> Signed-off-by:
-
Ben Gardon authored
Provide a real mechanism for fast invalidation by marking roots as invalid so that their reference count will quickly fall to zero and they will be torn down. One negative side affect of this approach is that a vCPU thread will likely drop the last reference to a root and be saddled with the work of tearing down an entire paging structure. This issue will be resolved in a later commit. Signed-off-by:
-
Ben Gardon authored
To reduce lock contention and interference with page fault handlers, allow the TDP MMU functions which enable and disable dirty logging to operate under the MMU read lock. Signed-off-by:
-
Ben Gardon authored
To reduce the impact of disabling dirty logging, change the TDP MMU function which zaps collapsible SPTEs to run under the MMU read lock. This way, page faults on zapped SPTEs can proceed in parallel with kvm_mmu_zap_collapsible_sptes. Signed-off-by:
-
Ben Gardon authored
To reduce lock contention and interference with page fault handlers, allow the TDP MMU function to zap a GFN range to operate under the MMU read lock. Signed-off-by:
-
Ben Gardon authored
Protect the contents of the TDP MMU roots list with RCU in preparation for a future patch which will allow the iterator macro to be used under the MMU lock in read mode. Signed-off-by:
-
Ben Gardon authored
To reduce dependence on the MMU write lock, don't rely on the assumption that the atomic operation in kvm_tdp_mmu_get_root will always succeed. By not relying on that assumption, threads do not need to hold the MMU lock in write mode in order to take a reference on a TDP MMU root. In the root iterator, this change means that some roots might have to be skipped if they are found to have a zero refcount. This will still never happen as of this patch, but a future patch will need that flexibility to make the root iterator safe under the MMU read lock. Signed-off-by:
-
Ben Gardon authored
In order to parallelize more operations for the TDP MMU, make the refcount on TDP MMU roots atomic, so that a future patch can allow multiple threads to take a reference on the root concurrently, while holding the MMU lock in read mode. Signed-off-by:
-
Ben Gardon authored
Refactor the yield safe TDP MMU root iterator to be more amenable to changes in future commits which will allow it to be used under the MMU lock in read mode. Currently the iterator requires a complicated dance between the helper functions and different parts of the for loop which makes it hard to reason about. Moving all the logic into a single function simplifies the iterator substantially. Signed-off-by:
-
Ben Gardon authored
kvm_tdp_mmu_put_root and kvm_tdp_mmu_free_root are always called together, so merge the functions to simplify TDP MMU root refcounting / freeing. Signed-off-by:
-
Ben Gardon authored
Minor cleanup to deduplicate the code used to free a struct kvm_mmu_page in the TDP MMU. No functional change intended. Signed-off-by:
-
Ben Gardon authored
The TDP MMU is almost the only user of kvm_mmu_get_root and kvm_mmu_put_root. There is only one use of put_root in mmu.c for the legacy / shadow MMU. Open code that one use and move the get / put functions to the TDP MMU so they can be extended in future commits. No functional change intended. Signed-off-by:
-
Ben Gardon authored
kvm_tdp_mmu_zap_collapsible_sptes unnecessarily removes the const qualifier from its memlsot argument, leading to a compiler warning. Add the const annotation and pass it to subsequent functions. Signed-off-by:
-
Sean Christopherson authored
Let the TDP MMU yield when unmapping a range in response to a MMU notification, if yielding is allowed by said notification. There is no reason to disallow yielding in this case, and in theory the range being invalidated could be quite large. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
- 17 Apr, 2021 15 commits
-
-
Sean Christopherson authored
Defer acquiring mmu_lock in the MMU notifier paths until a "hit" has been detected in the memslots, i.e. don't take the lock for notifications that don't affect the guest. For small VMs, spurious locking is a minor annoyance. And for "volatile" setups where the majority of notifications _are_ relevant, this barely qualifies as an optimization. But, for large VMs (hundreds of threads) with static setups, e.g. no page migration, no swapping, etc..., the vast majority of MMU notifier callbacks will be unrelated to the guest, e.g. will often be in response to the userspace VMM adjusting its own virtual address space. In such large VMs, acquiring mmu_lock can be painful as it blocks vCPUs from handling page faults. In some scenarios it can even be "fatal" in the sense that it causes unacceptable brownouts, e.g. when rebuilding huge pages after live migration, a significant percentage of vCPUs will be attempting to handle page faults. x86's TDP MMU implementation is especially susceptible to spurious locking due it taking mmu_lock for read when handling page faults. Because rwlock is fair, a single writer will stall future readers, while the writer is itself stalled waiting for in-progress readers to complete. This is exacerbated by the MMU notifiers often firing multiple times in quick succession, e.g. moving a page will (always?) invoke three separate notifiers: .invalidate_range_start(), invalidate_range_end(), and .change_pte(). Unnecessarily taking mmu_lock each time means even a single spurious sequence can be problematic. Note, this optimizes only the unpaired callbacks. Optimizing the .invalidate_range_{start,end}() pairs is more complex and will be done in a future patch. Suggested-by: -
Sean Christopherson authored
Acquire and release mmu_lock in the __kvm_handle_hva_range() helper instead of requiring the caller to do the same. This paves the way for future patches to take mmu_lock if and only if an overlapping memslot is found, without also having to introduce the on_lock() shenanigans used to manipulate the notifier count and sequence. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Yank out the hva-based MMU notifier APIs now that all architectures that use the notifiers have moved to the gfn-based APIs. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move PPC to the gfn-base MMU notifier APIs, and update all 15 bajillion PPC-internal hooks to work with gfns instead of hvas. No meaningful functional change intended, though the exact order of operations is slightly different since the memslot lookups occur before calling into arch code. Signed-off-by:
-
Sean Christopherson authored
Move MIPS to the gfn-based MMU notifier APIs, which do the hva->gfn lookup in common code, and whose code is nearly identical to MIPS' lookup. No meaningful functional change intended, though the exact order of operations is slightly different since the memslot lookups occur before calling into arch code. Signed-off-by:
-
Sean Christopherson authored
Move arm64 to the gfn-base MMU notifier APIs, which do the hva->gfn lookup in common code. No meaningful functional change intended, though the exact order of operations is slightly different since the memslot lookups occur before calling into arch code. Reviewed-by:
Marc Zyngier <maz@kernel.org> Tested-by:
-
Sean Christopherson authored
Move the hva->gfn lookup for MMU notifiers into common code. Every arch does a similar lookup, and some arch code is all but identical across multiple architectures. In addition to consolidating code, this will allow introducing optimizations that will benefit all architectures without incurring multiple walks of the memslots, e.g. by taking mmu_lock if and only if a relevant range exists in the memslots. The use of __always_inline to avoid indirect call retpolines, as done by x86, may also benefit other architectures. Consolidating the lookups also fixes a wart in x86, where the legacy MMU and TDP MMU each do their own memslot walks. Lastly, future enhancements to the memslot implementation, e.g. to add an interval tree to track host address, will need to touch far less arch specific code. MIPS, PPC, and arm64 will be converted one at a time in future patches. Signed-off-by:
-
Sean Christopherson authored
In KVM's .change_pte() notification callback, replace the notifier sequence bump with a WARN_ON assertion that the notifier count is elevated. An elevated count provides stricter protections than bumping the sequence, and the sequence is guarnateed to be bumped before the count hits zero. When .change_pte() was added by commit 828502d3 ("ksm: add mmu_notifier set_pte_at_notify()"), bumping the sequence was necessary as .change_pte() would be invoked without any surrounding notifications. However, since commit 6bdb913f ("mm: wrap calls to set_pte_at_notify with invalidate_range_start and invalidate_range_end"), all calls to .change_pte() are guaranteed to be surrounded by start() and end(), and so are guaranteed to run with an elevated notifier count. Note, wrapping .change_pte() with .invalidate_range_{start,end}() is a bug of sorts, as invalidating the secondary MMU's (KVM's) PTE defeats the purpose of .change_pte(). Every arch's kvm_set_spte_hva() assumes .change_pte() is called when the relevant SPTE is present in KVM's MMU, as the original goal was to accelerate Kernel Samepage Merging (KSM) by updating KVM's SPTEs without requiring a VM-Exit (due to invalidating the SPTE). I.e. it means that .change_pte() is effectively dead code on _all_ architectures. x86 and MIPS are clearcut nops if the old SPTE is not-present, and that is guaranteed due to the prior invalidation. PPC simply unmaps the SPTE, which again should be a nop due to the invalidation. arm64 is a bit murky, but it's also likely a nop because kvm_pgtable_stage2_map() is called without a cache pointer, which means it will map an entry if and only if an existing PTE was found. For now, take advantage of the bug to simplify future consolidation of KVMs's MMU notifier code. Doing so will not greatly complicate fixing .change_pte(), assuming it's even worth fixing. .change_pte() has been broken for 8+ years and no one has complained. Even if there are KSM+KVM users that care deeply about its performance, the benefits of avoiding VM-Exits via .change_pte() need to be reevaluated to justify the added complexity and testing burden. Ripping out .change_pte() entirely would be a lot easier. Signed-off-by:
-
Paolo Bonzini authored
Return 1 from kvm_unmap_hva_range and kvm_set_spte_hva if a flush is needed, so that the generic code can coalesce the flushes. Signed-off-by: -
Paolo Bonzini authored
Since all calls to kvm_flush_remote_tlbs must be preceded by kvm_mips_callbacks->prepare_flush_shadow, repurpose kvm_arch_flush_remote_tlb to invoke it. This makes it possible to use the TLB flushing mechanism provided by the generic MMU notifier code. Signed-off-by: -
Paolo Bonzini authored
Both trap-and-emulate and VZ have a single implementation that covers both .flush_shadow_all and .flush_shadow_memslot, and both of them end with a call to kvm_flush_remote_tlbs. Unify the callbacks into one and extract the call to kvm_flush_remote_tlbs. The next patches will pull it further out of the the architecture-specific MMU notifier functions kvm_unmap_hva_range and kvm_set_spte_hva. Signed-off-by: -
Paolo Bonzini authored
memslots are stored in RCU and there should be no need to change them. Signed-off-by: -
Sean Christopherson authored
Use GFP_KERNEL_ACCOUNT when allocating vCPUs to make it more obvious that that the allocations are accounted, to make it easier to audit KVM's allocations in the future, and to be consistent with other cache usage in KVM. When using SLAB/SLUB, this is a nop as the cache itself is created with SLAB_ACCOUNT. When using SLOB, there are caveats within caveats. SLOB doesn't honor SLAB_ACCOUNT, so passing GFP_KERNEL_ACCOUNT will result in vCPU allocations now being accounted. But, even that depends on internal SLOB details as SLOB will only go to the page allocator when its cache is depleted. That just happens to be extremely likely for vCPUs because the size of kvm_vcpu is larger than the a page for almost all combinations of architecture and page size. Whether or not the SLOB behavior is by design is unknown; it's just as likely that no SLOB users care about accounding and so no one has bothered to implemented support in SLOB. Regardless, accounting vCPU allocations will not break SLOB+KVM+cgroup users, if any exist. Reviewed-by:
Wanpeng Li <kernellwp@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Paolo Bonzini authored
When using manual protection of dirty pages, it is not necessary to protect nested page tables down to the 4K level; instead KVM can protect only hugepages in order to split them lazily, and delay write protection at 4K-granularity until KVM_CLEAR_DIRTY_LOG. This was overlooked in the TDP MMU, so do it there as well. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Reviewed-by:
-
Maxim Levitsky authored
Define KVM_GUESTDBG_VALID_MASK and use it to implement this capabiity. Compile tested only. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210401135451.1004564-6-mlevitsk@redhat.com> Signed-off-by:
-
