- 16 Sep, 2020 7 commits
-
-
Thomas Zimmermann authored
An active cursor plane requires a valid display mode. Change the commit_tail callback, so that it sets up the CRTC's mode before updating planes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
This change simplifies ast's modesetting code. The display mode is now programmed from within the CRTC's atomic_enable(), which only runs if we actually want to program the mode. Corresponding code in atomic_flush() is being removed. Also removed is atomic_begin(), which serves no purpose at all. Signed-off-by:
-
Thomas Zimmermann authored
The ast HW cursor requires the primary plane and CRTC to display at a valid mode and format. This is not the case while switching display modes, which can lead to the screen turing permanently dark. As a workaround, the ast driver now disables active planes while the mode or format switch takes place. It also synchronizes with the vertical refresh to give CRTC and planes some time to catch up on each other. The active planes planes (primary or cursor) will be re-enabled by each plane's atomic_update() function. v3: * move the logic into the CRTC's atomic_disable function v2: * move the logic into the commit-tail function Signed-off-by:
-
Thomas Zimmermann authored
The atomic modesetting code tried to distinguish format changes from full modesetting operations. But the implementation was buggy and the format registers were often updated even for simple pageflips. Fix this problem by handling format changes in the primary plane's update function. v3: * program format in primary plane's update function Signed-off-by:
-
Thomas Zimmermann authored
I'm adding myself as reviewer for ast, mgag200 and udl. I've already been keeping these drivers in shape for a while. While at it I'm also setting the list and tree for ast and mgag200, and update each driver's status to Supported. Working on these drivers is part of my job. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915071708.4743-1-tzimmermann@suse.de
-
Stefan Agner authored
The lcdif IP does not support a framebuffer pitch (stride) other than framebuffer width. Check for equality and reject the framebuffer otherwise. This prevents a distorted picture when using 640x800 and running the Mesa graphics stack. Mesa tries to use a cache aligned stride, which leads at that particular resolution to width != stride. Currently Mesa has no fallback behavior, but rejecting this configuration allows userspace to handle the issue correctly. Fixes: 45d59d70 ("drm: Add new driver for MXSFB controller") Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
-
Tian Tao authored
Handing the return value of drm_universal_plane_init to fix the following W=1 kernel build warning(s): vc4_plane.c: In function ‘vc4_plane_init’: vc4_plane.c:1340:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
-
- 15 Sep, 2020 14 commits
-
-
Dave Airlie authored
Just use the top bit of page flags to store the populated state. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dave Airlie authored
Move bound up into the bo object, and keep populated with the tt object. The ghost object handling needs to follow the flags at the bo level now instead of it being part of the ttm tt object. Reviewed-by:
-
Dave Airlie authored
Move these up to the bo level, moving ttm_tt to just being backing store. Next step is to move the bound flag out. Reviewed-by:
-
Dave Airlie authored
Drivers have to call populate themselves now before binding. Reviewed-by:
-
Dave Airlie authored
This just makes things easier later. Reviewed-by:
-
Dave Airlie authored
All places this was called was using bo->ttm either direct or indirectly. v2: move to ttm_bo Reviewed-by:
-
Dave Airlie authored
This adds 2 getters and 4 setters, however unbound and populated are currently the same thing, this will change, it also drops a BUG_ON that seems not that useful. Reviewed-by:
-
Christian König authored
Instead of letting TTM make an educated guess based on some mask all drivers should just specify what caching they want for their CPU mappings. Signed-off-by:
-
Christian König authored
Instead of letting TTM masking the caching bits specify directly what the driver needs. Signed-off-by:
-
Christian König authored
As far as I can tell this was never used either and we just always fallback to the order cached > wc > uncached anyway. Signed-off-by:
-
Enric Balletbo i Serra authored
The get_edid() callback can be triggered anytime by an ioctl, i.e drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before. The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen, until the graphical session manager starts. To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following: 1. If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device. 2. If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays. 3. This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID. Signed-off-by:Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by:
Bilal Wasim <bwasim.lkml@gmail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Gerd Hoffmann authored
Usually we wait for the host to complete the unref request, then cleanup the guest-side state of the object in the completion callback. When submitting the unref command failed the completion callback will not be called though, so cleanup right away. Fixes a WARN on stale mm entries on driver shutdown. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com
-
Gerd Hoffmann authored
In case queuing virtio commands fails (can happen when the device got unplugged) pass up the error. Signed-off-by:
-
Gerd Hoffmann authored
Use managed init call to simplify cleanup. Signed-off-by:
-
- 14 Sep, 2020 8 commits
-
-
Paul Cercueil authored
Ingenic SoCs are most notably used in cheap chinese handheld gaming consoles. There, the games and applications generally render in software directly into GEM buffers. Traditionally, GEM buffers are mapped write-combine. Writes to the buffer are accelerated, and reads are slow. Application doing lots of alpha-blending paint inside shadow buffers, which is then memcpy'd into the final GEM buffer. On recent Ingenic SoCs however, it is much faster to have a fully cached GEM buffer, in which applications paint directly, and whose data is invalidated before scanout, than having a write-combine GEM buffer, even when alpha blending is not used. Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver to allow GEM buffers to be mapped fully-cached, in order to speed up software rendering. v2: Use standard noncoherent DMA APIs v3: Use damage clips instead of invalidating full frames v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot() is enough in this case. v5: - Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an extra object reference is obtained, which causes our dumb buffers to never be freed. It should have been drm_gem_cma_mmap_obj(). However, our custom mmap function only differs with one flag, so we can cleanly handle both modes in ingenic_drm_gem_mmap(). - Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in drm_gem_cma_mmap_obj(). Signed-off-by:Paul Cercueil <paul@crapouillou.net> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
-
Ville Syrjälä authored
We update the timestamping constants per-crtc explicitly in intel_crtc_update_active_timings(). Furtermore the helper will use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus let's drop the helper call an rely on what we already have in intel_crtc_update_active_timings(). We can now also drop the hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added to keep the helper from deriving the timestamping constants from the wrong thing. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
drm/atomic-helper: Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state() The timestamping constants have nothing to do with any legacy state so should not be updated from drm_atomic_helper_update_legacy_modeset_state(). Let's make everyone call drm_atomic_helper_calc_timestamping_constants() directly instead of relying on drm_atomic_helper_update_legacy_modeset_state() to call it. @@ expression S; @@ - drm_atomic_helper_calc_timestamping_constants(S); @@ expression D, S; @@ drm_atomic_helper_update_legacy_modeset_state(D, S); + drm_atomic_helper_calc_timestamping_constants(S); v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel) Signed-off-by: -
Ville Syrjälä authored
Put the vblank timestamping constants update loop into its own function. It has no business living inside drm_atomic_helper_update_legacy_modeset_state() so we'll be wanting to move it out entirely. As a first step we'll still call it from drm_atomic_helper_update_legacy_modeset_state(). v2: Drop comment about 'legacy state' in the new function Signed-off-by:
-
Maxime Ripard authored
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic properly. Signed-off-by:Maxime Ripard <maxime@cerno.tech>
-
Daniel Vetter authored
Paul needs 1a21e5b9 ("drm/ingenic: Fix leak of device_node pointer") and 3b5b005e ("drm/ingenic: Fix driver not probing when IPU port is missing") from -fixes to be able to merge further ingenic patches into -next. Signed-off-by:
-
Jia Yang authored
I got a use-after-free report when doing some fuzz test: If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be freed by ttm_buffer_object_destroy() in ttm_bo_init(). But then drm_gem_vram_create() and drm_gem_vram_init() will free "gbo" and "gbo->bo.base" again. BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150 CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G B W 5.7.0-rc4-msan #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack dump_stack+0x1c9/0x220 kmsan_report+0xf7/0x1e0 __msan_warning+0x58/0xa0 drm_vma_offset_remove+0xb3/0x150 drm_gem_free_mmap_offset drm_gem_object_release+0x159/0x180 drm_gem_vram_init drm_gem_vram_create+0x7c5/0x990 drm_gem_vram_fill_create_dumb drm_gem_vram_driver_dumb_create+0x238/0x590 drm_mode_create_dumb drm_mode_create_dumb_ioctl+0x41d/0x450 drm_ioctl_kernel+0x5a4/0x710 drm_ioctl+0xc6f/0x1240 vfs_ioctl ksys_ioctl __do_sys_ioctl __se_sys_ioctl+0x2e9/0x410 __x64_sys_ioctl+0x4a/0x70 do_syscall_64+0xb8/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4689b9 Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f368fa4dc98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000000076bf00 RCX: 00000000004689b9 RDX: 0000000020000240 RSI: 00000000c02064b2 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004d17e0 R14: 00007f368fa4e6d4 R15: 000000000076bf0c Uninit was created at: kmsan_save_stack_with_flags kmsan_internal_poison_shadow+0x66/0xd0 kmsan_slab_free+0x6e/0xb0 slab_free_freelist_hook slab_free kfree+0x571/0x30a0 drm_gem_vram_destroy ttm_buffer_object_destroy+0xc8/0x130 ttm_bo_release kref_put ttm_bo_put+0x117d/0x23e0 ttm_bo_init_reserved+0x11c0/0x11d0 ttm_bo_init+0x289/0x3f0 drm_gem_vram_init drm_gem_vram_create+0x775/0x990 drm_gem_vram_fill_create_dumb drm_gem_vram_driver_dumb_create+0x238/0x590 drm_mode_create_dumb drm_mode_create_dumb_ioctl+0x41d/0x450 drm_ioctl_kernel+0x5a4/0x710 drm_ioctl+0xc6f/0x1240 vfs_ioctl ksys_ioctl __do_sys_ioctl __se_sys_ioctl+0x2e9/0x410 __x64_sys_ioctl+0x4a/0x70 do_syscall_64+0xb8/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 If ttm_bo_init() fails, the "gbo" will be freed by ttm_buffer_object_destroy() in ttm_bo_init(). But then drm_gem_vram_create() and drm_gem_vram_init() will free "gbo" again. Reported-by:
Hulk Robot <hulkci@huawei.com> Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by:
Jia Yang <jiayang5@huawei.com> Signed-off-by:
-
Thomas Zimmermann authored
VRAM helpers support ref counting for pin and vmap operations, no need to avoid these operations by employing the internal kmap interface. Just use drm_gem_vram_vmap() and let it handle the details. Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the last user of these internal functions. v2: * fixed a comma in commit description Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de
-
- 13 Sep, 2020 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A collection of fixes I've been accruing over the last few weeks, none of them have been severe enough to warrant flushing the queue but it's been long enough now that it's a good idea to send them in. A handful of them are fixups for QSPI DT/bindings/compatibles, some smaller fixes for system DMA clock control and TMU interrupts on i.MX, a handful of fixes for OMAP, including a fix for DSI (display) on omap5" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits) arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy ARM: dts: vfxxx: Add syscon compatible with OCOTP ARM: dts: imx6q-logicpd: Fix broken PWM arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: ls1021a: fix QuadSPI-memory reg range arm64: defconfig: Enable ptn5150 extcon driver arm64: defconfig: Enable USB gadget with configfs ARM: configs: Update Integrator defconfig ARM: dts: omap5: Fix DSI base address and clocks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/Thunderbolt fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5. Nothing huge, just a number of bugfixes and new device ids for problems reported: - new USB serial driver ids - bug fixes for syzbot reported problems - typec driver fixes - thunderbolt driver fixes - revert of reported broken commit All of these have been in linux-next with no reported issues" * tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes usb: typec: intel_pmc_mux: Do not configure Altmode HPD High usb: core: fix slab-out-of-bounds Read in read_descriptors Revert "usb: dwc3: meson-g12a: fix shared reset control use" usb: typec: ucsi: acpi: Check the _DEP dependencies usb: typec: intel_pmc_mux: Un-register the USB role switch usb: Fix out of sync data toggle if a configured device is reconfigured USB: serial: option: support dynamic Quectel USB compositions USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up thunderbolt: Disable ports that are not implemented USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are a number of staging and IIO driver fixes for 5.9-rc5. The majority of these are IIO driver fixes, to resolve a timestamp issue that was recently found to affect a bunch of IIO drivers. The other fixes in here are: - small IIO driver fixes - greybus driver fix - counter driver fix (came in through the IIO fixes tree) All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) iio: adc: mcp3422: fix locking on error path iio: adc: mcp3422: fix locking scope iio: adc: meson-saradc: Use the parent device to look up the calib data iio:adc:max1118 Fix alignment of timestamp and data leak issues iio:adc:ina2xx Fix timestamp alignment issue. iio:adc:ti-adc084s021 Fix alignment and data leak issues. iio:adc:ti-adc081c Fix alignment and data leak issues iio:magnetometer:ak8975 Fix alignment and data leak issues. iio:light:ltr501 Fix timestamp alignment issue. iio:light:max44000 Fix timestamp alignment and prevent data leak. iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. iio:accel:mma7455: Fix timestamp alignment and prevent data leak. iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. iio:accel:mma8452: Fix timestamp alignment and prevent data leak. iio: accel: kxsd9: Fix alignment of local buffer. iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set counter: microchip-tcb-capture: check the correct variable iio: cros_ec: Set Gyroscope default frequency to 25Hz ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 5.9-rc5 Included in here are: - firmware loader memory leak fix - firmware loader testing fixes for non-EFI systems - device link locking fixes found by lockdep - kobject_del() bugfix that has been affecting some callers - debugfs minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: test_firmware: Test platform fw loading on non-EFI systems PM: <linux/device.h>: fix @em_pd kernel-doc warning kobject: Drop unneeded conditional in __kobject_del() driver core: Fix device_pm_lock() locking for device links MAINTAINERS: Add the security document to SECURITY CONTACT driver code: print symbolic error code debugfs: Fix module state check condition kobject: Restore old behaviour of kobject_del(NULL) firmware_loader: fix memory leak for paged buffer
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragonSigned-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver fixes from Greg KH: "Here are a number of small driver fixes for 5.9-rc5 Included in here are: - habanalabs driver fixes - interconnect driver fixes - soundwire driver fixes - dyndbg fixes for reported issues, and then reverts to fix it all up to a sane state. - phy driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "dyndbg: accept query terms like file=bar and module=foo" Revert "dyndbg: fix problem parsing format="foo bar"" scripts/tags.sh: exclude tools directory from tags generation video: fbdev: fix OOB read in vga_8planes_imageblit() dyndbg: fix problem parsing format="foo bar" dyndbg: refine export, rename to dynamic_debug_exec_queries() dyndbg: give %3u width in pr-format, cosmetic only interconnect: qcom: Fix small BW votes being truncated to zero soundwire: fix double free of dangling pointer interconnect: Show bandwidth for disabled paths as zero in debugfs habanalabs: fix report of RAZWI initiator coordinates habanalabs: prevent user buff overflow phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init soundwire: bus: fix typo in comment on INTSTAT registers phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "A bit on the bigger side, mostly due to me being on vacation, then busy, then on parental leave, but there's nothing worrisome. ARM: - Multiple stolen time fixes, with a new capability to match x86 - Fix for hugetlbfs mappings when PUD and PMD are the same level - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty logging, for example) - Fix tracing output of 64bit values x86: - nSVM state restore fixes - Async page fault fixes - Lots of small fixes everywhere" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: emulator: more strict rsm checks. KVM: nSVM: more strict SMM checks when returning to nested guest SVM: nSVM: setup nested msr permission bitmap on nested state load SVM: nSVM: correctly restore GIF on vmexit from nesting after migration x86/kvm: don't forget to ACK async PF IRQ x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit KVM: SVM: avoid emulation with stale next_rip KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN KVM: SVM: Periodically schedule when unregistering regions on destroy KVM: MIPS: Change the definition of kvm type kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control KVM: fix memory leak in kvm_io_bus_unregister_dev() KVM: Check the allocation of pv cpu mask KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected KVM: arm64: Update page shift if stage 2 block mapping not supported KVM: arm64: Fix address truncation in traces KVM: arm64: Do not try to map PUDs when they are folded into PMD arm64/x86: KVM: Introduce steal-time cap ...
-
- 12 Sep, 2020 1 commit
-
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "Fixes for compile issues pointed out by kbuild and one bug I found in initrd with the 5.9 patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix issue with get_user for 64-bit values openrisc: Fix cache API compile issue when not inlining openrisc: Reserve memblock for initrd
-
